Skip to contentSkip to conversation

Powerpc: Xilinx: Intc: Fix level irqs which have duplicates

PATCH In review John Linn 2 participants 2 messages Apr 3, 2009 – Apr 12, 2009

Subsystems (2)
lore
Share & tools
lore

John Linn

author
#0 lore raw

PATCH 1/1 Powerpc: Xilinx: Intc: Fix level irqs which have duplicates

The interrupt controller was not handling level interrupts correctly such that duplicate interrupts were happening. This fixes the problem and adds edge type interrupts which are needed in Xilinx hardware.

---
 arch/powerpc/sysdev/xilinx_intc.c |  112 ++++++++++++++++++++++++++++++++++---
 1 files changed, 103 insertions(+), 9 deletions(-)
arch/powerpc/sysdev/xilinx_intc.c +103 -9
index a22e1a2..7c99a1e 100644
@@ -41,8 +41,30 @@
 
 static struct irq_host *master_irqhost;
 
+/* The following table allows the interrupt type, edge or level,
+ * to be cached after being read from the device tree until the interrupt
+ * is mapped
+ */
+static int xilinx_intc_typetable[32];
+
+/* Map the interrupt type from the device tree to the interrupt types
+ * used by the interrupt subsystem
+ */
+static unsigned char xilinx_intc_map_senses[] = {
+	IRQ_TYPE_EDGE_RISING,
+	IRQ_TYPE_EDGE_FALLING,
+	IRQ_TYPE_LEVEL_HIGH,
+	IRQ_TYPE_LEVEL_LOW,
+};
+
 /*
- * IRQ Chip operations
+ * The interrupt controller is setup such that it doesn't work well with
+ * the level interrupt handler in the kernel because the handler acks the
+ * interrupt before calling the application interrupt handler. To deal with
+ * that, we use 2 different irq chips so that different functions can be
+ * used for level and edge type interrupts.
+ *
+ * IRQ Chip common (across level and edge) operations
  */
 static void xilinx_intc_mask(unsigned int virq)
 {
@@ -52,15 +74,54 @@ static void xilinx_intc_mask(unsigned int virq)
 	out_be32(regs + XINTC_CIE, 1 << irq);
 }
 
-static void xilinx_intc_unmask(unsigned int virq)
+static int xilinx_intc_set_type(unsigned int virq, unsigned int flow_type)
+{
+	struct irq_desc *desc = get_irq_desc(virq);
+
+	desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
+	desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
+	if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
+		desc->status |= IRQ_LEVEL;
+	return 0;
+}
+
+/*
+ * IRQ Chip level operations
+ */
+static void xilinx_intc_level_unmask(unsigned int virq)
 {
 	int irq = virq_to_hw(virq);
 	void * regs = get_irq_chip_data(virq);
 	pr_debug("unmask: %d\n", irq);
 	out_be32(regs + XINTC_SIE, 1 << irq);
+
+	/* ack level irqs because they can't be acked during
+	 * ack function since the handle_level_irq function
+	 * acks the irq before calling the inerrupt handler
+	 */
+	out_be32(regs + XINTC_IAR, 1 << irq);
+}
+
+static struct irq_chip xilinx_intc_level_irqchip = {
+	.typename = "Xilinx Level INTC",
+	.mask = xilinx_intc_mask,
+	.mask_ack = xilinx_intc_mask,
+	.unmask = xilinx_intc_level_unmask,
+	.set_type = xilinx_intc_set_type,
+};
+
+/*
+ * IRQ Chip edge operations
+ */
+static void xilinx_intc_edge_unmask(unsigned int virq)
+{
+	int irq = virq_to_hw(virq);
+	void *regs = get_irq_chip_data(virq);
+	pr_debug("unmask: %d\n", irq);
+	out_be32(regs + XINTC_SIE, 1 << irq);
 }
 
-static void xilinx_intc_ack(unsigned int virq)
+static void xilinx_intc_edge_ack(unsigned int virq)
 {
 	int irq = virq_to_hw(virq);
 	void * regs = get_irq_chip_data(virq);
@@ -68,27 +129,60 @@ static void xilinx_intc_ack(unsigned int virq)
 	out_be32(regs + XINTC_IAR, 1 << irq);
 }
 
-static struct irq_chip xilinx_intc_irqchip = {
-	.typename = "Xilinx INTC",
+static struct irq_chip xilinx_intc_edge_irqchip = {
+	.typename = "Xilinx Edge  INTC",
 	.mask = xilinx_intc_mask,
-	.unmask = xilinx_intc_unmask,
-	.ack = xilinx_intc_ack,
+	.unmask = xilinx_intc_edge_unmask,
+	.ack = xilinx_intc_edge_ack,
+	.set_type = xilinx_intc_set_type,
 };
 
 /*
  * IRQ Host operations
  */
+
+/**
+ * xilinx_intc_xlate - translate virq# from device tree interrupts property
+ */
+static int xilinx_intc_xlate(struct irq_host *h, struct device_node *ct,
+				u32 *intspec, unsigned int intsize,
+				irq_hw_number_t *out_hwirq,
+				unsigned int *out_flags)
+{
+	if (intsize != 2)
+		return -1;
+
+	/* keep a copy of the interrupt type til the interrupt is mapped
+	 */
+	xilinx_intc_typetable[intspec[0]] = xilinx_intc_map_senses[intspec[1]];
+
+	/* Xilinx uses 2 interrupt entries, the 1st being the h/w
+	 * interrupt number, the 2nd being the interrupt type, edge or level
+	 */
+	*out_hwirq = intspec[0];
+	*out_flags = xilinx_intc_map_senses[intspec[1]];
+
+	return 0;
+}
 static int xilinx_intc_map(struct irq_host *h, unsigned int virq,
 				  irq_hw_number_t irq)
 {
 	set_irq_chip_data(virq, h->host_data);
-	set_irq_chip_and_handler(virq, &xilinx_intc_irqchip, handle_level_irq);
-	set_irq_type(virq, IRQ_TYPE_NONE);
+
+	if (xilinx_intc_typetable[irq] == IRQ_TYPE_LEVEL_HIGH ||
+	    xilinx_intc_typetable[irq] == IRQ_TYPE_LEVEL_LOW) {
+		set_irq_chip_and_handler(virq, &xilinx_intc_level_irqchip,
+			handle_level_irq);
+	} else {
+		set_irq_chip_and_handler(virq, &xilinx_intc_edge_irqchip,
+			handle_edge_irq);
+	}
 	return 0;
 }
 
 static struct irq_host_ops xilinx_intc_ops = {
 	.map = xilinx_intc_map,
+	.xlate = xilinx_intc_xlate,
 };
 
 struct irq_host * __init
Signature · 5 lines
1.6.2.1



This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.
#1 lore raw

I think this looks good. I'll need to pull it into my tree and try it out.

g.

Quoted 7 lines · John Linn

The interrupt controller was not handling level interrupts correctly such that duplicate interrupts were happening. This fixes the problem and adds edge type interrupts which are needed in Xilinx hardware.

---
=A0arch/powerpc/sysdev/xilinx_intc.c | =A0112 +++++++++++++++++++++++++++=

+++++++---

arch/powerpc/sysdev/xili=

Quoted 3 lines

=A01 files changed, 103 insertions(+), 9 deletions(-)

arch/powerpc/sysdev/xili= renamed from arch/powerpc/sysdev/xilinx_intc.c +0 -0

nx_intc.c

arch/powerpc/sysdev/xilinx_intc.c line 45

Quoted 9 lines

index a22e1a2..7c99a1e 100644

arch/powerpc/sysdev/xilinx_intc.c +2 -0
@@ -41,8 +41,30 @@
 
 =A0static struct irq_host *master_irqhost;
 
+/* The following table allows the interrupt type, edge or level,
+ * to be cached after being read from the device tree until the interrup=

t

Quoted 14 lines
arch/powerpc/sysdev/xilinx_intc.c +14 -0
+ * is mapped
+ */
+static int xilinx_intc_typetable[32];
+
+/* Map the interrupt type from the device tree to the interrupt types
+ * used by the interrupt subsystem
+ */
+static unsigned char xilinx_intc_map_senses[] =3D {
+ =A0 =A0 =A0 IRQ_TYPE_EDGE_RISING,
+ =A0 =A0 =A0 IRQ_TYPE_EDGE_FALLING,
+ =A0 =A0 =A0 IRQ_TYPE_LEVEL_HIGH,
+ =A0 =A0 =A0 IRQ_TYPE_LEVEL_LOW,
+};
+
Quoted 4 lines

=A0/*
- * IRQ Chip operations
+ * The interrupt controller is setup such that it doesn't work well with
+ * the level interrupt handler in the kernel because the handler acks th=

e

Quoted 1 line

+ * interrupt before calling the application interrupt handler. To deal w=

ith

arch/powerpc/sysdev/xilinx_intc.c static void xilinx_intc_mask(unsigned int virq) · line 77

Quoted 13 lines

+ * that, we use 2 different irq chips so that different functions can be
+ * used for level and edge type interrupts.
+ *
+ * IRQ Chip common (across level and edge) operations
=A0*/
=A0static void xilinx_intc_mask(unsigned int virq)
=A0{

arch/powerpc/sysdev/xilinx_intc.c +1 -1
@@ -52,15 +74,54 @@ static void xilinx_intc_mask(unsigned int virq)
 =A0 =A0 =A0 =A0out_be32(regs + XINTC_CIE, 1 << irq);
 =A0}
 
-static void xilinx_intc_unmask(unsigned int virq)
+static int xilinx_intc_set_type(unsigned int virq, unsigned int flow_typ=

e)

Quoted 70 lines
arch/powerpc/sysdev/xilinx_intc.c +45 -5
+{
+ =A0 =A0 =A0 struct irq_desc *desc =3D get_irq_desc(virq);
+
+ =A0 =A0 =A0 desc->status &=3D ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
+ =A0 =A0 =A0 desc->status |=3D flow_type & IRQ_TYPE_SENSE_MASK;
+ =A0 =A0 =A0 if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 desc->status |=3D IRQ_LEVEL;
+ =A0 =A0 =A0 return 0;
+}
+
+/*
+ * IRQ Chip level operations
+ */
+static void xilinx_intc_level_unmask(unsigned int virq)
 =A0{
 =A0 =A0 =A0 =A0int irq =3D virq_to_hw(virq);
 =A0 =A0 =A0 =A0void * regs =3D get_irq_chip_data(virq);
 =A0 =A0 =A0 =A0pr_debug("unmask: %d\n", irq);
 =A0 =A0 =A0 =A0out_be32(regs + XINTC_SIE, 1 << irq);
+
+ =A0 =A0 =A0 /* ack level irqs because they can't be acked during
+ =A0 =A0 =A0 =A0* ack function since the handle_level_irq function
+ =A0 =A0 =A0 =A0* acks the irq before calling the inerrupt handler
+ =A0 =A0 =A0 =A0*/
+ =A0 =A0 =A0 out_be32(regs + XINTC_IAR, 1 << irq);
+}
+
+static struct irq_chip xilinx_intc_level_irqchip =3D {
+ =A0 =A0 =A0 .typename =3D "Xilinx Level INTC",
+ =A0 =A0 =A0 .mask =3D xilinx_intc_mask,
+ =A0 =A0 =A0 .mask_ack =3D xilinx_intc_mask,
+ =A0 =A0 =A0 .unmask =3D xilinx_intc_level_unmask,
+ =A0 =A0 =A0 .set_type =3D xilinx_intc_set_type,
+};
+
+/*
+ * IRQ Chip edge operations
+ */
+static void xilinx_intc_edge_unmask(unsigned int virq)
+{
+ =A0 =A0 =A0 int irq =3D virq_to_hw(virq);
+ =A0 =A0 =A0 void *regs =3D get_irq_chip_data(virq);
+ =A0 =A0 =A0 pr_debug("unmask: %d\n", irq);
+ =A0 =A0 =A0 out_be32(regs + XINTC_SIE, 1 << irq);
 =A0}
 
-static void xilinx_intc_ack(unsigned int virq)
+static void xilinx_intc_edge_ack(unsigned int virq)
 =A0{
 =A0 =A0 =A0 =A0int irq =3D virq_to_hw(virq);
 =A0 =A0 =A0 =A0void * regs =3D get_irq_chip_data(virq);
@@ -68,27 +129,60 @@ static void xilinx_intc_ack(unsigned int virq)
 =A0 =A0 =A0 =A0out_be32(regs + XINTC_IAR, 1 << irq);
 =A0}
 
-static struct irq_chip xilinx_intc_irqchip =3D {
- =A0 =A0 =A0 .typename =3D "Xilinx INTC",
+static struct irq_chip xilinx_intc_edge_irqchip =3D {
+ =A0 =A0 =A0 .typename =3D "Xilinx Edge =A0INTC",
 =A0 =A0 =A0 =A0.mask =3D xilinx_intc_mask,
- =A0 =A0 =A0 .unmask =3D xilinx_intc_unmask,
- =A0 =A0 =A0 .ack =3D xilinx_intc_ack,
+ =A0 =A0 =A0 .unmask =3D xilinx_intc_edge_unmask,
+ =A0 =A0 =A0 .ack =3D xilinx_intc_edge_ack,
+ =A0 =A0 =A0 .set_type =3D xilinx_intc_set_type,
 =A0};
 

=A0/*
=A0* IRQ Host operations
=A0*/

arch/powerpc/sysdev/xilinx_intc.c static void xilinx_intc_ack(unsigned int virq)

Quoted 3 lines
arch/powerpc/sysdev/xilinx_intc.c +3 -0
+
+/**
+ * xilinx_intc_xlate - translate virq# from device tree interrupts prope=

rty

Quoted 3 lines

+ */
+static int xilinx_intc_xlate(struct irq_host *h, struct device_node *ct,
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 u32 *intspe=

c, unsigned int intsize,

Quoted 1 line

+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 irq_hw_numb=

er_t *out_hwirq,

Quoted 1 line

+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 unsigned in=

t *out_flags)

arch/powerpc/sysdev/xilinx_intc.c

Quoted 5 lines
arch/powerpc/sysdev/xilinx_intc.c +5 -0
+{
+ =A0 =A0 =A0 if (intsize !=3D 2)
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 return -1;
+
+ =A0 =A0 =A0 /* keep a copy of the interrupt type til the interrupt is m=

apped

Quoted 2 lines

+ =A0 =A0 =A0 =A0*/
+ =A0 =A0 =A0 xilinx_intc_typetable[intspec[0]] =3D xilinx_intc_map_sense=

s[intspec[1]];

Quoted 3 lines

+
+ =A0 =A0 =A0 /* Xilinx uses 2 interrupt entries, the 1st being the h/w
+ =A0 =A0 =A0 =A0* interrupt number, the 2nd being the interrupt type, ed=

ge or level

Quoted 8 lines

+ =A0 =A0 =A0 =A0*/
+ =A0 =A0 =A0 *out_hwirq =3D intspec[0];
+ =A0 =A0 =A0 *out_flags =3D xilinx_intc_map_senses[intspec[1]];

arch/powerpc/sysdev/xilinx_intc.c +3 -0
+
+ =A0 =A0 =A0 return 0;
+}

=A0static int xilinx_intc_map(struct irq_host *h, unsigned int virq, =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0irq_hw=

_number_t irq)

Quoted 3 lines

=A0{
=A0 =A0 =A0 =A0set_irq_chip_data(virq, h->host_data);
- =A0 =A0 =A0 set_irq_chip_and_handler(virq, &xilinx_intc_irqchip, handle=

_level_irq);

Quoted 3 lines

- =A0 =A0 =A0 set_irq_type(virq, IRQ_TYPE_NONE);
+
+ =A0 =A0 =A0 if (xilinx_intc_typetable[irq] =3D=3D IRQ_TYPE_LEVEL_HIGH |=

|

Quoted 1 line

+ =A0 =A0 =A0 =A0 =A0 xilinx_intc_typetable[irq] =3D=3D IRQ_TYPE_LEVEL_LO=

W) {

Quoted 1 line

+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 set_irq_chip_and_handler(virq, &xilinx_intc=

_level_irqchip,

Quoted 3 lines

+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 handle_level_irq);
+ =A0 =A0 =A0 } else {
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 set_irq_chip_and_handler(virq, &xilinx_intc=

_edge_irqchip,

Quoted 10 lines

+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 handle_edge_irq);
+ =A0 =A0 =A0 }
=A0 =A0 =A0 =A0return 0;
=A0}

=A0static struct irq_host_ops xilinx_intc_ops =3D { =A0 =A0 =A0 =A0.map =3D xilinx_intc_map,
+ =A0 =A0 =A0 .xlate =3D xilinx_intc_xlate, =A0};

Quoted 7 lines

=A0struct irq_host * __init
--
1.6.2.1

This email and any attachments are intended for the sole use of the named=

recipient(s) and contain(s) confidential information that may be proprieta=
ry, privileged or copyrighted under applicable law. If you are not the inte= nded recipient, do not read, copy, or forward this email message or any att= achments. Delete this email message and any attachments immediately.

Quoted 3 lines

--=20
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.