ARM Pull Request
Hi Wolfgang,
Please pull
The following changes since commit 23e4af49e066a53cd3e3659b68ef90572d88de84:
Guennadi Liakhovetski (1):
ARM: add the imx31_phycore_eet target to MAINTAINERS
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
Dirk Behme (1):
OMAP3: Update Overo pin mux for new expansion board
Jean-Christophe PLAGNIOL-VILLARD (4):
arm: update co-processor 15 access
arm: clean cache management
arm: unify reset command
integratorap: fix PCI support
Kyungmin Park (1):
Move machine specific code to board at s3c64xx (v2)
Minkyu Kang (1):
s3c64xx: fix the wrong gpio offset
Sanjeev Premi (1):
OMAP: Fix compile issue
Tom Rix (2):
OMAP3 Fix multiline formatting in board init files. ZOOM1 Remove legacy NAND defines
board/armltd/integratorap/split_by_variant.sh | 18 +++- board/omap3/beagle/beagle.c | 20 ++-- board/omap3/evm/evm.c | 16 ++-- board/omap3/overo/overo.c | 12 +- board/omap3/overo/overo.h | 9 +- board/omap3/pandora/pandora.c | 12 +- board/omap3/zoom1/zoom1.c | 12 +- board/samsung/smdk6400/lowlevel_init.S | 7 ++ cpu/arm1136/cpu.c | 90 ++---------------- cpu/arm1176/cpu.c | 103 +-------------------- cpu/arm1176/s3c64xx/cpu_init.S | 7 -- cpu/arm720t/cpu.c | 120 +++--------------------- cpu/arm920t/cpu.c | 124 ++---------------------- cpu/arm925t/cpu.c | 96 ++----------------- cpu/arm926ejs/cpu.c | 125 ++---------------------- cpu/arm946es/cpu.c | 101 ++------------------ cpu/arm_cortexa8/cpu.c | 82 +---------------- cpu/arm_cortexa8/omap3/board.c | 2 +- cpu/arm_intcm/cpu.c | 25 ----- cpu/ixp/cpu.c | 83 ++-------------- cpu/lh7a40x/cpu.c | 121 ++---------------------- cpu/pxa/cpu.c | 81 ++-------------- cpu/s3c44b0/cpu.c | 9 -- cpu/sa1100/cpu.c | 81 ++-------------- include/asm-arm/system.h | 84 +++++++++++++++++ include/configs/B2.h | 1 + include/configs/assabet.h | 2 + include/configs/cerf250.h | 3 + include/configs/cradle.h | 3 + include/configs/csb226.h | 4 + include/configs/delta.h | 3 + include/configs/dnp1110.h | 2 + include/configs/evb4510.h | 1 + include/configs/gcplus.h | 2 + include/configs/innokom.h | 4 + include/configs/integratorap.h | 4 +- include/configs/lart.h | 2 + include/configs/logodl.h | 4 + include/configs/lubbock.h | 3 + include/configs/omap3_zoom1.h | 17 ---- include/configs/pleb2.h | 3 + include/configs/pxa255_idp.h | 3 + include/configs/shannon.h | 2 + include/configs/trizepsiv.h | 3 + include/configs/wepep250.h | 2 + include/configs/xaeniax.h | 3 + include/configs/xm250.h | 3 + include/configs/xsengine.h | 3 + include/configs/zylonite.h | 3 + include/s3c6400.h | 11 ++- lib_arm/Makefile | 4 + lib_arm/cache-cp15.c | 120 ++++++++++++++++++++++++ lib_arm/reset.c | 53 +++++++++++ 53 files changed, 501 insertions(+), 1207 deletions(-) create mode 100644 include/asm-arm/system.h create mode 100644 lib_arm/cache-cp15.c create mode 100644 lib_arm/reset.c
Best Regards,
J.
Dear Jean-Christophe,
Quoted 7 lines · Jean-Christophe PLAGNIOL-VILLARD
Hi Wolfgang,
Please pull
The following changes since commit23e4af49e066a53cd3e3659b68ef90572d88de84:
Guennadi Liakhovetski (1):
ARM: add theimx31_phycore_eettarget toMAINTAINERS
Quoted 6 lines
are available in the git repository at:
git://git.denx.de/u-boot-arm.gitmasterDirk Behme (1):
OMAP3: Update Overo pin mux for new expansion board
What's about
http://lists.denx.de/pipermail/u-boot/2009-April/050170.html
(see http://lists.denx.de/pipermail/u-boot/2009-April/050137.html too)
?
Dirk
Dear Jean-Christophe,
Quoted 13 lines · In message <[email protected]> Dirk Behme wrote:
Quoted 6 lines
Please pull
The following changes since commit23e4af49e066a53cd3e3659b68ef90572d88de84:
Guennadi Liakhovetski (1):
ARM: add theimx31_phycore_eettarget toMAINTAINERSQuoted 6 lines
are available in the git repository at:
git://git.denx.de/u-boot-arm.gitmasterDirk Behme (1):
OMAP3: Update Overo pin mux for new expansion board
Quoted 7 lines
What's about
http://lists.denx.de/pipermail/u-boot/2009-April/050170.html
(see http://lists.denx.de/pipermail/u-boot/2009-April/050137.html too)
?
Could you please comment?
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de I often quote myself; it adds spice to my conversation. - G. B. Shaw
Wolfgang Denk
AppliedDear Jean-Christophe PLAGNIOL-VILLARD,
Quoted 82 lines · In message <[email protected]> you wrote:
Hi Wolfgang,
Please pull
The following changes since commit23e4af49e066a53cd3e3659b68ef90572d88de84:
Guennadi Liakhovetski (1):
ARM: add theimx31_phycore_eettarget toMAINTAINERSare available in the git repository at:
git://git.denx.de/u-boot-arm.gitmasterDirk Behme (1):
OMAP3: Update Overo pin mux for new expansion boardJean-Christophe PLAGNIOL-VILLARD (4):
arm: update co-processor 15 access
arm: clean cache management
arm: unify reset command
integratorap: fix PCI supportKyungmin Park (1):
Move machine specific code to board at s3c64xx (v2)Minkyu Kang (1):
s3c64xx: fix the wrong gpio offsetSanjeev Premi (1):
OMAP: Fix compile issueTom Rix (2):
OMAP3 Fix multiline formatting in board init files. ZOOM1 Remove legacy NAND definesboard/armltd/integratorap/split_by_variant.sh | 18 +++- board/omap3/beagle/beagle.c | 20 ++-- board/omap3/evm/evm.c | 16 ++-- board/omap3/overo/overo.c | 12 +- board/omap3/overo/overo.h | 9 +- board/omap3/pandora/pandora.c | 12 +- board/omap3/zoom1/zoom1.c | 12 +- board/samsung/smdk6400/lowlevel_init.S | 7 ++ cpu/arm1136/cpu.c | 90 ++---------------- cpu/arm1176/cpu.c | 103 +-------------------- cpu/arm1176/s3c64xx/cpu_init.S | 7 -- cpu/arm720t/cpu.c | 120 +++--------------------- cpu/arm920t/cpu.c | 124 ++---------------------- cpu/arm925t/cpu.c | 96 ++----------------- cpu/arm926ejs/cpu.c | 125 ++---------------------- cpu/arm946es/cpu.c | 101 ++------------------ cpu/arm_cortexa8/cpu.c | 82 +---------------- cpu/arm_cortexa8/omap3/board.c | 2 +- cpu/arm_intcm/cpu.c | 25 ----- cpu/ixp/cpu.c | 83 ++-------------- cpu/lh7a40x/cpu.c | 121 ++---------------------- cpu/pxa/cpu.c | 81 ++-------------- cpu/s3c44b0/cpu.c | 9 -- cpu/sa1100/cpu.c | 81 ++-------------- include/asm-arm/system.h | 84 +++++++++++++++++ include/configs/B2.h | 1 + include/configs/assabet.h | 2 + include/configs/cerf250.h | 3 + include/configs/cradle.h | 3 + include/configs/csb226.h | 4 + include/configs/delta.h | 3 + include/configs/dnp1110.h | 2 + include/configs/evb4510.h | 1 + include/configs/gcplus.h | 2 + include/configs/innokom.h | 4 + include/configs/integratorap.h | 4 +- include/configs/lart.h | 2 + include/configs/logodl.h | 4 + include/configs/lubbock.h | 3 + include/configs/omap3_zoom1.h | 17 ---- include/configs/pleb2.h | 3 + include/configs/pxa255_idp.h | 3 + include/configs/shannon.h | 2 + include/configs/trizepsiv.h | 3 + include/configs/wepep250.h | 2 + include/configs/xaeniax.h | 3 + include/configs/xm250.h | 3 + include/configs/xsengine.h | 3 + include/configs/zylonite.h | 3 +
Quoted 8 lines
include/s3c6400.h | 11 ++- lib_arm/Makefile | 4 + lib_arm/cache-cp15.c | 120 ++++++++++++++++++++++++ lib_arm/reset.c | 53 +++++++++++ 53 files changed, 501 insertions(+), 1207 deletions(-) create mode 100644 include/asm-arm/system.h create mode 100644 lib_arm/cache-cp15.c create mode 100644 lib_arm/reset.c
Applied, thanks.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de If at first you don't succeed, you are running about average.