Skip to contentSkip to conversation

NAND: minor davinci_nand cleanup

PATCH New David Brownell 1 participant 1 message Apr 8, 2009

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 NAND: minor davinci_nand cleanup

From: David Brownell <[email protected]>

Make the DaVinci NAND driver require platform_data with board-specific configuration. We can't actually do any kind of sane job of configuring it otherwise.

Also fix the comment about picking the "best" ECC mode. We can't do that any more; it relied on knowing what kind of CPU we're using, they don't all support 4-bit ECC.

---
Applies to the DaVinci tree too. FWIW, I've sanity tested the davinci_nand driver in mainline (dm6446evm) -- works!

 drivers/mtd/nand/davinci_nand.c |   27 +++++++++++----------------
 1 file changed, 11 insertions(+), 16 deletions(-)
drivers/mtd/nand/davinci_nand.c +11 -16
@@ -306,6 +306,10 @@ static int __init nand_davinci_probe(str
 	uint32_t			val;
 	nand_ecc_modes_t		ecc_mode;
 
+	/* insist on board-specific configuration */
+	if (!pdata)
+		return -ENODEV;
+
 	/* which external chipselect will we be managing? */
 	if (pdev->id < 0 || pdev->id > 3)
 		return -ENODEV;
@@ -351,7 +355,7 @@ static int __init nand_davinci_probe(str
 	info->chip.select_chip	= nand_davinci_select_chip;
 
 	/* options such as NAND_USE_FLASH_BBT or 16-bit widths */
-	info->chip.options	= pdata ? pdata->options : 0;
+	info->chip.options	= pdata->options;
 
 	info->ioaddr		= (uint32_t __force) vaddr;
 
@@ -360,14 +364,8 @@ static int __init nand_davinci_probe(str
 	info->mask_chipsel	= pdata->mask_chipsel;
 
 	/* use nandboot-capable ALE/CLE masks by default */
-	if (pdata && pdata->mask_ale)
-		info->mask_ale	= pdata->mask_cle;
-	else
-		info->mask_ale	= MASK_ALE;
-	if (pdata && pdata->mask_cle)
-		info->mask_cle	= pdata->mask_cle;
-	else
-		info->mask_cle	= MASK_CLE;
+	info->mask_ale		= pdata->mask_cle ? : MASK_ALE;
+	info->mask_cle		= pdata->mask_cle ? : MASK_CLE;
 
 	/* Set address of hardware control function */
 	info->chip.cmd_ctrl	= nand_davinci_hwcontrol;
@@ -377,11 +375,8 @@ static int __init nand_davinci_probe(str
 	info->chip.read_buf     = nand_davinci_read_buf;
 	info->chip.write_buf    = nand_davinci_write_buf;
 
-	/* use board-specific ECC config; else, the best available */
-	if (pdata)
-		ecc_mode = pdata->ecc_mode;
-	else
-		ecc_mode = NAND_ECC_HW;
+	/* Use board-specific ECC config */
+	ecc_mode		= pdata->ecc_mode;
 
 	switch (ecc_mode) {
 	case NAND_ECC_NONE:
@@ -469,7 +464,7 @@ static int __init nand_davinci_probe(str
 			info->mtd.name = master_name;
 		}
 
-		if (mtd_parts_nb <= 0 && pdata) {
+		if (mtd_parts_nb <= 0) {
 			mtd_parts = pdata->parts;
 			mtd_parts_nb = pdata->nr_parts;
 		}
@@ -482,7 +477,7 @@ static int __init nand_davinci_probe(str
 				info->partitioned = true;
 		}
 
-	} else if (pdata && pdata->nr_parts) {
+	} else if (pdata->nr_parts) {
 		dev_warn(&pdev->dev, "ignoring %d default partitions on %s\n",
 				pdata->nr_parts, info->mtd.name);
 	}