Porting uboot to Broadcom 47xx (MIPS)
Hi,
I'm the author of the Linux SSB subsystem, which implements 95% of the system bootup code for the Broadcom 47xx MIPS architecture.
I'd like to start porting u-boot to the bcm47xx. (I guess nobody started with this already?)
Which GIT repository should I base my work on?
I guess this one sounds promising: git://git.denx.de/u-boot-mips.git
I'm happy for any pointers by you guys. :)
Signature · 1 line
Greetings, Michael.
Quoted 8 lines · Michael Buesch
Hi,
I'm the author of the Linux SSB subsystem, which implements 95% of the system
bootup code for the Broadcom 47xx MIPS architecture.I'd like to start porting u-boot to the bcm47xx. (I guess nobody started with this already?)
Did I miss something or Broadcom (or Marvell) already started giving out their datasheets, less for something more useful without 37 NDAs per each BGA pin?
I don't understand why we accept any code for all those closed platforms that no one can even get a rudimentary data without all those NDAs into a GPL-licensed U-Boot? Especially for those companies that make helluva secret even of mere PHYs, less something more complex...
If it had been up to me I wouldn't've accepted any of such code into U-Boot.
---
******************************************************************
* KSI at home KOI8 Net < > The impossible we do immediately. *
* Las Vegas NV, USA < > Miracles require 24-hour notice. *
******************************************************************
Quoted 8 lines · On Wednesday 08 April 2009 00:52:07 ksi at koi8.net wrote:
Quoted 6 lines · Michael Buesch
Hi,
I'm the author of the Linux SSB subsystem, which implements 95% of the system
bootup code for the Broadcom 47xx MIPS architecture.
Quoted 6 lines
Quoted 2 lines
I'd like to start porting u-boot to the bcm47xx. (I guess nobody started with this already?)
Did I miss something or Broadcom (or Marvell) already started giving out their datasheets, less for something more useful without 37 NDAs per each BGA pin?
Well, there's full sourcecode available for CFE [1] (their crappy bootloader) and there's a datasheet for the CPU and SDRAM controller (and some more). I think that's enough to get a proper uboot port.
Quoted 6 lines
I don't understand why we accept any code for all those closed platforms that no one can even get a rudimentary data without all those NDAs into a GPL-licensed U-Boot? Especially for those companies that make helluva secret even of mere PHYs, less something more complex...
If it had been up to me I wouldn't've accepted any of such code into U-Boot.
I don't think 47xx really is a "closed platform".
Yeah, it's not a fully open platform, because there's little active support from Broadcom. But there's lots of code and even some documentation around for this platform.
Don't confuse bcm47xx with bcm43xx.
[1] Modified unofficial fork of CFE: http://bu3sch.de/gitweb?p=cfe.git;a=summary
Signature · 1 line
Greetings, Michael.
Quoted 2 lines · Michael Buesch
I'd like to start porting u-boot to the bcm47xx. (I guess nobody started with this already?)
Cool.
Quoted 2 lines
Which GIT repository should I base my work on?
I guess this one sounds promising:git://git.denx.de/u-boot-mips.git
Currentrly u-boot-mips.git is used just as staging purpose for Wolfgang. Nothing interesting is there, please use git://git.denx.de/u-boot.git,
instead.
Thanks,
Signature · 2 lines
Shinya Kuribayashi NEC Electronics
Quoted 3 lines · On Wednesday 08 April 2009 01:48:35 Shinya Kuribayashi wrote:
Currentrly u-boot-mips.git is used just as staging purpose for Wolfgang. Nothing interesting is there, please use
git://git.denx.de/u-boot.git,
instead.
Ok thanks. I'll put my temporary development crap into this repository, which is based on the main u-boot repository:
http://bu3sch.de/gitweb?p=u-boot-bcm47xx.git;a=summary
I'll put bcm47xx development into a separate branch so one can easily diff between u-boot mainline and the development crap.
Signature · 1 line
Greetings, Michael.