Multiple Flash devices
I have a NOR Flash used as a boot flash (16MB) and a NAND flash (128MB)to store kernel/rfs on coldfire based custom board . The u-boot is running out of NOR flash but I have problems in enabling NAND support from u-boot. Need clarity on couple of definitions in the board configuration file.
CFG_FLASH_SIZE :
Should it include both NOR+NAND size
CFG_MAX_FLASH_BANKS:
If there are two flash devices, is it correct to give as 2. Is NAND flash identified as a seperate Bank.
CFG_FLASH_BANKS_LIST :
Should it include both Flash base addresses.
Welcome any other pointers when working with both NOR/NAND Flash.
Thanks in adv.
//Kishor
Quoted 8 lines · On Wednesday 08 April 2009 05:48:19 Ravula Kishor wrote:
I have a NOR Flash used as a boot flash (16MB) and a NAND flash (128MB)to store kernel/rfs on coldfire based custom board . The u-boot is running out of NOR flash but I have problems in enabling NAND support from u-boot. Need clarity on couple of definitions in the board configuration file.
CFG_FLASH_SIZE:CFG_MAX_FLASH_BANKS:CFG_FLASH_BANKS_LIST:
these defines have nothing to do with NAND
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20090408/c6977a9d/attachment.pgp