Skip to contentSkip to conversation

ibmaem: Automatically load on HC10 blade

PATCH Applied Darrick J. Wong 2 participants 2 messages Apr 7, 2009 – Apr 8, 2009

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ibmaem: Automatically load on HC10 blade

Enable auto-probing for the HC10 blade and amend the supported system list.

---

 Documentation/hwmon/ibmaem |    2 +-
 drivers/hwmon/Kconfig      |    2 +-
 drivers/hwmon/ibmaem.c     |    1 +
 3 files changed, 3 insertions(+), 2 deletions(-)
Documentation/hwmon/ibmaem +1 -1
index e98bdfe..1e0d59e 100644
@@ -7,7 +7,7 @@ henceforth as AEM.
 Supported systems:
   * Any recent IBM System X server with AEM support.
     This includes the x3350, x3550, x3650, x3655, x3755, x3850 M2,
-    x3950 M2, and certain HS2x/LS2x/QS2x blades.  The IPMI host interface
+    x3950 M2, and certain HC10/HS2x/LS2x/QS2x blades.  The IPMI host interface
     driver ("ipmi-si") needs to be loaded for this driver to do anything.
     Prefix: 'ibmaem'
     Datasheet: Not available
drivers/hwmon/Kconfig +1 -1
index b4eea02..208d0c7 100644
@@ -395,7 +395,7 @@ config SENSORS_IBMAEM
 	  power sensors and capping hardware in various IBM System X
 	  servers that support Active Energy Manager.  This includes
 	  the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
-	  and certain HS2x/LS2x/QS2x blades.
+	  and certain HC10/HS2x/LS2x/QS2x blades.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called ibmaem.
drivers/hwmon/ibmaem.c +1 -0
index fe74609..405d3fb 100644
@@ -1127,3 +1127,4 @@ MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3650-*");
 MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3655-*");
 MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3755-*");
 MODULE_ALIAS("dmi:bvnIBM:*:pnIBM3850M2/x3950M2-*");
+MODULE_ALIAS("dmi:bvnIBM:*:pnIBMBladeHC10-*");

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

Applied
#1 lore raw

Hi Darrick,

Quoted 9 lines · Darrick J. Wong

Enable auto-probing for the HC10 blade and amend the supported system list.

---

 Documentation/hwmon/ibmaem |    2 +-
 drivers/hwmon/Kconfig      |    2 +-
 drivers/hwmon/ibmaem.c     |    1 +
 3 files changed, 3 insertions(+), 2 deletions(-)

Applied, thanks.

Signature · 6 lines
Jean Delvare

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors