ether1: convert to net_device_ops
Subsystems (2)
PATCH 5/6 ether1: convert to net_device_ops
Signed-off-by Alexander Beregalov <[email protected]>
---
drivers/net/arm/ether1.c | 19 +++++++++++++------ 1 files changed, 13 insertions(+), 6 deletions(-)
drivers/net/arm/ether1.c +13 -6
@@ -991,6 +991,18 @@ static void __devinit ether1_banner(void)printk (KERN_INFO "%s" , version); } +static const struct net_device_ops ether1_netdev_ops = { + .ndo_open = ether1_open, + .ndo_stop = ether1_close, + .ndo_start_xmit = ether1_sendpacket, + .ndo_get_stats = ether1_getstats, + .ndo_set_multicast_list = ether1_setmulticastlist, + .ndo_tx_timeout = ether1_timeout, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, +}; +static int __devinit ether1_probe (struct expansion_card *ec,const struct ecard_id *id) {
@@ -1031,12 +1043,7 @@ ether1_probe(struct expansion_card *ec, const struct ecard_id *id) goto free; } - dev->open = ether1_open; - dev->stop = ether1_close; - dev->hard_start_xmit = ether1_sendpacket; - dev->get_stats = ether1_getstats; - dev->set_multicast_list = ether1_setmulticastlist; - dev->tx_timeout = ether1_timeout; + dev->netdev_ops = ðer1_netdev_ops; dev->watchdog_timeo =5 *HZ /100 ; ret =register_netdev (dev);
From: Alexander Beregalov <[email protected]>
Date: Fri, 10 Apr 2009 07:28:55 +0400
Quoted 1 line
Signed-off-by Alexander Beregalov <[email protected]>
Applied.