Skip to contentSkip to conversation

2.6.30-rc1 regression: boot hang due to commit ff69f2bba67bd45514923aaedbf40fe351787c59

DISCUSSION yakui_zhao 2 participants 2 messages Apr 14, 2009 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

yakui_zhao

author
#1 lore raw
Quoted 4 lines · Bruno Prémont

Hi All,

I bisected a boot-hang on Acer TravelMate 66x laptop and ended on commit ff69f2bba67bd45514923aaedbf40fe351787c59.

Will you please add the boot option of "initcall_debug" and attach the screenshot where it hangs?

It will be great if you can file a new bug at
http://bugzilla.kernel.org/enter_bug.cgi?product=ACPI
and attach the output of acpidump?
Thanks.

Quoted 614 lines
Quoted 42 lines

acpi: fix of pmtimer overflow that make Cx states time incorrect

We found Cx states time abnormal in our some of machines which have 16 LCPUs, the C0 take too many time while system is really idle when kernel enabled tickless and highres. powertop output is below:

PowerTOP version 1.9 (C) 2007 Intel Corporation

Cn Avg residency P-states (frequencies)

   C0 (cpu running)        (40.5%)         2.53 Ghz     0.0%
   C1                0.0ms ( 0.0%)         2.53 Ghz     0.0%
   C2              128.8ms (59.5%)         2.40 Ghz     0.0%
                                           1.60 Ghz   100.0%

Wakeups-from-idle per second : 4.7 interval: 20.0s
no ACPI power usage estimate available

Top causes for wakeups:

     41.4% ( 24.9)       <interrupt> : extra timer interrupt
     20.2% ( 12.2)     <kernel core> : usb_hcd_poll_rh_status

(rh_timer_func)

After tacking detailed for this issue, Yakui and I find it is due to 24 bit PM timer overflows when some of cpu sleep more than 4 seconds. With tickless kernel, the CPU want to sleep as much as possible when system idle. But the Cx sleep time are recorded by pmtimer which length is determined by BIOS. The current Cx time was gotten in the following function from driver/acpi/processor_idle.c:

   static inline u32 ticks_elapsed(u32 t1, u32 t2)
   {
          if (t2 >= t1)
                  return (t2 - t1);
          else if (!(acpi_gbl_FADT.flags & ACPI_FADT_32BIT_TIMER))
                  return (((0x00FFFFFF - t1) + t2) & 0x00FFFFFF);
          else
                  return ((0xFFFFFFFF - t1) + t2);
   }
Quoted 8 lines

If pmtimer is 24 bits and it take 5 seconds from t1 to t2, in above function, just about 1 seconds ticks was recorded. So the Cx time will be reduced about 4 seconds. and this is why we see above powertop output.

To resolve this problem, Yakui and I use ktime_get() to record the Cx states time instead of PM timer as the following patch. the patch was tested with i386/x86_64 modes on several platforms.

Reverting just that commit gets the system to boot (current linus tree as of commit

  commit   b0cbc861a3c05e634520b049b5cc27ad6febb51f
  Author:  Linus Torvalds <[email protected]>
  Date:    Sat Apr 11 12:45:20 2009 -0700

Subject: Revert "ACPI battery: fix async boot oops"

With above commit the boot process hangs at

[    0.640995] Marking TSC unstable due to TSC halts in idle
[    0.643771] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
or
[    0.640995] Marking TSC unstable due to TSC halts in idle

(which one of both depends on the bisection stage)

Bruno

A complete boot log with above commit reverted follows below:

[    0.000000] Linux version 2.6.30-rc1 (kbuild@neptune) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #1 Mon Apr 13 15:24:43 CEST 2009
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001dee0000 (usable)
[    0.000000]  BIOS-e820: 000000001dee0000 - 000000001deec000 (ACPI data)
[    0.000000]  BIOS-e820: 000000001deec000 - 000000001df00000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000001df00000 - 0000000020000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
[    0.000000] DMI present.
[    0.000000] last_pfn = 0x1dee0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FE0000000 write-back
[    0.000000]   1 base 01DF00000 mask FFFF00000 uncachable
[    0.000000]   2 base 01E000000 mask FFE000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000001000 (usable)
[    0.000000]  modified: 0000000000001000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009f800 (usable)
[    0.000000]  modified: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000ce000 - 00000000000d0000 (reserved)
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000001dee0000 (usable)
[    0.000000]  modified: 000000001dee0000 - 000000001deec000 (ACPI data)
[    0.000000]  modified: 000000001deec000 - 000000001df00000 (ACPI NVS)
[    0.000000]  modified: 000000001df00000 - 0000000020000000 (reserved)
[    0.000000]  modified: 00000000fec10000 - 00000000fec20000 (reserved)
[    0.000000]  modified: 00000000ff800000 - 00000000ffc00000 (reserved)
[    0.000000]  modified: 00000000fffffc00 - 0000000100000000 (reserved)
[    0.000000] init_memory_mapping: 0000000000000000-000000001dee0000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 001dc00000 page 2M
[    0.000000]  001dc00000 - 001dee0000 page 4k
[    0.000000] kernel direct mapping tables up to 1dee0000 @ 10000-15000
[    0.000000] ACPI: RSDP 000f6050 00014 (v00 ACER  )
[    0.000000] ACPI: RSDT 1dee5a39 00030 (v01 ACER   Wagtail  20020114  LTP 00000000)
[    0.000000] ACPI: FACP 1deebf2c 00074 (v01 ACER   Wagtail  20020114 PTL  00000050)
[    0.000000] ACPI: DSDT 1dee5a69 064C3 (v01 ACER   Wagtail  20020114 MSFT 0100000E)
[    0.000000] ACPI: FACS 1defcfc0 00040
[    0.000000] ACPI: HPET 1deebfa0 00038 (v01 ACER   Wagtail  20020114 PTL  00000000)
[    0.000000] ACPI: BOOT 1deebfd8 00028 (v01 ACER   Wagtail  20020114  LTP 00000001)
[    0.000000] 478MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 1dee0000
[    0.000000]   low ram: 0 - 1dee0000
[    0.000000]   node 0 low ram: 00000000 - 1dee0000
[    0.000000]   node 0 bootmap 00011000 - 00014bdc
[    0.000000] (6 early reservations) ==> bootmem [0000000000 - 001dee0000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000100000 - 0000558df0]    TEXT DATA BSS ==> [0000100000 - 0000558df0]
[    0.000000]   #2 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
[    0.000000]   #3 [0000559000 - 000055b198]              BRK ==> [0000559000 - 000055b198]
[    0.000000]   #4 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
[    0.000000]   #5 [0000011000 - 0000015000]          BOOTMAP ==> [0000011000 - 0000015000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x0001dee0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00000001
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0001dee0
[    0.000000] On node 0 totalpages: 122480
[    0.000000] free_area_init_node: node 0, pgdat c0494d80, node_mem_map c1000000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3952 pages, LIFO batch:0
[    0.000000]   Normal zone: 926 pages used for memmap
[    0.000000]   Normal zone: 117570 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0x0 is invalid
[    0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[    0.000000] nr_irqs_gsi: 16
[    0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec10000)
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 121522
[    0.000000] Kernel command line: hpet=force BOOT_IMAGE=2.6.30-git ro root=806 softlevel=default video=vesafb:1400x1050-32
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] NR_IRQS:288
[    0.000000] CPU 0 irqstacks, hard=c0496000 soft=c0497000
[    0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1495.136 MHz processor.
[    0.010000] Console: colour dummy device 80x25
[    0.010000] console [tty0] enabled
[    0.010000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.010000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.010000] Memory: 480952k/490368k available (2515k kernel code, 8736k reserved, 1193k data, 288k init, 0k highmem)
[    0.010000] virtual kernel memory layout:
[    0.010000]     fixmap  : 0xfffaa000 - 0xfffff000   ( 340 kB)
[    0.010000]     vmalloc : 0xde6e0000 - 0xfffa8000   ( 536 MB)
[    0.010000]     lowmem  : 0xc0000000 - 0xddee0000   ( 478 MB)
[    0.010000]       .init : 0xc04a1000 - 0xc04e9000   ( 288 kB)
[    0.010000]       .data : 0xc0374c08 - 0xc049f278   (1193 kB)
[    0.010000]       .text : 0xc0100000 - 0xc0374c08   (2515 kB)
[    0.010000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.010000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.010009] Calibrating delay loop (skipped), value calculated using timer frequency.. 2990.27 BogoMIPS (lpj=14951360)
[    0.010040] Mount-cache hash table entries: 512
[    0.010190] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.010200] CPU: L2 cache: 1024K
[    0.010206] [ds] using Pentium M configuration
[    0.010211] [ds] pebs not available
[    0.010219] Intel machine check architecture supported.
[    0.010227] Intel machine check reporting enabled on CPU#0.
[    0.010239] CPU: Intel(R) Pentium(R) M processor 1500MHz stepping 05
[    0.010250] Checking 'hlt' instruction... OK.
[    0.050402] ACPI: Core revision 20090320
[    0.062937] ACPI: setting ELCR to 0200 (from 0c00)
[    0.070181] net_namespace: 724 bytes
[    0.070415] khelper used greatest stack depth: 3440 bytes left
[    0.070464] Time: 15:28:07  Date: 04/13/09
[    0.070523] NET: Registered protocol family 16
[    0.070659] ACPI: bus type pci registered
[    0.071947] PCI: PCI BIOS revision 2.10 entry at 0xfd742, last bus=2
[    0.071955] PCI: Using configuration type 1 for base access
[    0.072693] bio: create slab <bio-0> at 0
[    0.073608] ACPI: EC: Look up EC in DSDT
[    0.080200] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    0.080252] khelper used greatest stack depth: 2992 bytes left
[    0.100182] ACPI: Interpreter enabled
[    0.100205] ACPI: (supports S0 S3 S5)
[    0.100233] ACPI: Using PIC for interrupt routing
[    0.109162] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
[    0.109176] ACPI: EC: driver started in interrupt mode
[    0.109268] ACPI: Power Resource [PFN0] (off)
[    0.109326] ACPI: Power Resource [PFN1] (off)
[    0.110342] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[    0.110366] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.110513] pci 0000:00:02.0: reg 10 32bit mmio: [0xe8000000-0xefffffff]
[    0.110520] pci 0000:00:02.0: reg 14 32bit mmio: [0xe0000000-0xe007ffff]
[    0.110526] pci 0000:00:02.0: reg 18 io port: [0x1800-0x1807]
[    0.110545] pci 0000:00:02.0: supports D1
[    0.110563] pci 0000:00:02.1: reg 10 32bit mmio: [0xf0000000-0xf7ffffff]
[    0.110569] pci 0000:00:02.1: reg 14 32bit mmio: [0xe0080000-0xe00fffff]
[    0.110590] pci 0000:00:02.1: supports D1
[    0.110657] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
[    0.110705] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
[    0.110752] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
[    0.110805] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe0100000-0xe01003ff]
[    0.110857] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.110867] pci 0000:00:1d.7: PME# disabled
[    0.110947] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.110955] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[    0.110965] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
[    0.110992] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[    0.110999] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[    0.111006] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[    0.111013] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[    0.111021] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
[    0.111028] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[    0.111074] pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f]
[    0.111114] pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff]
[    0.111121] pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff]
[    0.111128] pci 0000:00:1f.5: reg 18 32bit mmio: [0xe0100c00-0xe0100dff]
[    0.111135] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xe0100800-0xe01008ff]
[    0.111162] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[    0.111170] pci 0000:00:1f.5: PME# disabled
[    0.111200] pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff]
[    0.111207] pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f]
[    0.111240] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[    0.111249] pci 0000:00:1f.6: PME# disabled
[    0.111287] pci 0000:02:02.0: reg 10 32bit mmio: [0xe0204000-0xe0205fff]
[    0.111323] pci 0000:02:02.0: supports D1 D2
[    0.111326] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.111335] pci 0000:02:02.0: PME# disabled
[    0.111367] pci 0000:02:04.0: reg 10 32bit mmio: [0xe0206000-0xe0206fff]
[    0.111434] pci 0000:02:06.0: reg 10 32bit mmio: [0xe0207000-0xe0207fff]
[    0.111451] pci 0000:02:06.0: supports D1 D2
[    0.111454] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.111463] pci 0000:02:06.0: PME# disabled
[    0.111495] pci 0000:02:06.1: reg 10 32bit mmio: [0xe0208000-0xe0208fff]
[    0.111513] pci 0000:02:06.1: supports D1 D2
[    0.111516] pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.111525] pci 0000:02:06.1: PME# disabled
[    0.111562] pci 0000:02:07.0: reg 10 32bit mmio: [0xe0209000-0xe02097ff]
[    0.111570] pci 0000:02:07.0: reg 14 32bit mmio: [0xe0200000-0xe0203fff]
[    0.111605] pci 0000:02:07.0: supports D1 D2
[    0.111608] pci 0000:02:07.0: PME# supported from D0 D1 D2 D3hot
[    0.111617] pci 0000:02:07.0: PME# disabled
[    0.111649] pci 0000:00:1e.0: transparent bridge
[    0.111657] pci 0000:00:1e.0: bridge io port: [0x3000-0x3fff]
[    0.111662] pci 0000:00:1e.0: bridge 32bit mmio: [0xe0200000-0xe07fffff]
[    0.111701] pci_bus 0000:00: on NUMA node 0
[    0.111709] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.111917] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.115782] ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
[    0.115944] ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
[    0.116108] ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
[    0.116266] ACPI: PCI Interrupt Link [LNKD] (IRQs 10) *11
[    0.116429] ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *11
[    0.116587] ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled.
[    0.116746] ACPI: PCI Interrupt Link [LNKG] (IRQs 11) *0, disabled.
[    0.116905] ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
[    0.117134] SCSI subsystem initialized
[    0.118964] libata version 3.00 loaded.
[    0.119177] ACPI: WMI: Mapper loaded
[    0.119190] PCI: Using ACPI for IRQ routing
[    0.119303] Expanded resource reserved due to conflict with Adapter ROM
[    0.119628] hpet clockevent registered
[    0.119633] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.119645] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.119656] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.120867] pnp: PnP ACPI init
[    0.120898] ACPI: bus type pnp registered
[    0.126594] pnp: PnP ACPI: found 9 devices
[    0.126605] ACPI: ACPI bus type pnp unregistered
[    0.126629] system 00:04: ioport range 0x600-0x60f has been reserved
[    0.126638] system 00:04: ioport range 0x700-0x70f has been reserved
[    0.126646] system 00:04: ioport range 0x800-0x80f has been reserved
[    0.126654] system 00:04: ioport range 0x1000-0x107f has been reserved
[    0.126662] system 00:04: ioport range 0x1180-0x11bf has been reserved
[    0.126670] system 00:04: ioport range 0x1c0-0x1cf has been reserved
[    0.126679] system 00:04: ioport range 0xfe00-0xfe00 has been reserved
[    0.126688] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[    0.126696] system 00:04: ioport range 0x610-0x61f has been reserved
[    0.126705] system 00:04: iomem range 0xfec10000-0xfec1ffff has been reserved
[    0.126714] system 00:04: iomem range 0xff800000-0xffbfffff has been reserved
[    0.126723] system 00:04: iomem range 0xfff00000-0xffffffff could not be reserved
[    0.126733] system 00:04: iomem range 0x0-0x9ffff could not be reserved
[    0.126742] system 00:04: iomem range 0xe0000-0xfffff could not be reserved
[    0.161561] pci 0000:02:06.0: CardBus bridge, secondary bus 0000:03
[    0.161570] pci 0000:02:06.0:   IO window: 0x003000-0x0030ff
[    0.161579] pci 0000:02:06.0:   IO window: 0x003400-0x0034ff
[    0.161587] pci 0000:02:06.0:   PREFETCH window: 0x30000000-0x33ffffff
[    0.161597] pci 0000:02:06.0:   MEM window: 0x3c000000-0x3fffffff
[    0.161606] pci 0000:02:06.1: CardBus bridge, secondary bus 0000:07
[    0.161613] pci 0000:02:06.1:   IO window: 0x003800-0x0038ff
[    0.161622] pci 0000:02:06.1:   IO window: 0x003c00-0x003cff
[    0.161631] pci 0000:02:06.1:   PREFETCH window: 0x34000000-0x37ffffff
[    0.161640] pci 0000:02:06.1:   MEM window: 0x40000000-0x43ffffff
[    0.161649] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[    0.161657] pci 0000:00:1e.0:   IO window: 0x3000-0x3fff
[    0.161666] pci 0000:00:1e.0:   MEM window: 0xe0200000-0xe07fffff
[    0.161675] pci 0000:00:1e.0:   PREFETCH window: 0x00000030000000-0x00000037ffffff
[    0.161698] pci 0000:00:1e.0: setting latency timer to 64
[    0.161951] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[    0.161960] PCI: setting IRQ 10 as level-triggered
[    0.161967] pci 0000:02:06.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[    0.161983] pci 0000:02:06.1: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[    0.161997] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.162001] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.162005] pci_bus 0000:02: resource 0 io:  [0x3000-0x3fff]
[    0.162009] pci_bus 0000:02: resource 1 mem: [0xe0200000-0xe07fffff]
[    0.162012] pci_bus 0000:02: resource 2 mem: [0x30000000-0x37ffffff]
[    0.162016] pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
[    0.162020] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[    0.162024] pci_bus 0000:03: resource 0 io:  [0x3000-0x30ff]
[    0.162027] pci_bus 0000:03: resource 1 io:  [0x3400-0x34ff]
[    0.162031] pci_bus 0000:03: resource 2 mem: [0x30000000-0x33ffffff]
[    0.162035] pci_bus 0000:03: resource 3 mem: [0x3c000000-0x3fffffff]
[    0.162038] pci_bus 0000:07: resource 0 io:  [0x3800-0x38ff]
[    0.162042] pci_bus 0000:07: resource 1 io:  [0x3c00-0x3cff]
[    0.162045] pci_bus 0000:07: resource 2 mem: [0x34000000-0x37ffffff]
[    0.162049] pci_bus 0000:07: resource 3 mem: [0x40000000-0x43ffffff]
[    0.162101] NET: Registered protocol family 2
[    0.162233] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.162589] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.162728] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[    0.162802] TCP: Hash tables configured (established 16384 bind 16384)
[    0.162810] TCP reno registered
[    0.162880] NET: Registered protocol family 1
[    0.162945] Simple Boot Flag at 0x37 set to 0x1
[    0.162972] Machine check exception polling timer started.
[    0.163010] Scanning for low memory corruption every 60 seconds
[    0.166982] msgmni has been set to 939
[    0.167121] io scheduler noop registered
[    0.167146] io scheduler cfq registered (default)
[    0.167172] pci 0000:00:02.0: Boot video device
[    0.167558] vesafb: framebuffer at 0xe8000000, mapped to 0xde780000, using 5120k, total 32576k
[    0.167570] vesafb: mode is 1280x1024x16, linelength=2560, pages=11
[    0.167577] vesafb: scrolling: redraw
[    0.167584] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    0.202073] Console: switching to colour frame buffer device 160x64
[    0.232735] fb0: VESA VGA frame buffer device
[    0.235243] ACPI: AC Adapter [ACAD] (on-line)
[    0.235543] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.235853] ACPI: Power Button (FF) [PWRF]
[    0.236091] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    0.236839] ACPI: Lid Switch [LID]
[    0.237045] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    0.237385] ACPI: Sleep Button (CM) [SLPB]
[    0.237764] fan PNP0C0B:00: registered as cooling_device0
[    0.237981] ACPI: Fan [FAN0] (off)
[    0.238286] fan PNP0C0B:01: registered as cooling_device1
[    0.238502] ACPI: Fan [FAN1] (off)
[    0.239031] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:02/input/input3
[    0.239380] ACPI: Video Device [AGP] (multi-head: yes  rom: yes  post: no)
[    0.239726] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    0.240030] processor ACPI_CPU:00: registered as cooling_device2
[    0.242070] thermal LNXTHERM:01: registered as thermal_zone0
[    0.242312] ACPI: Thermal Zone [THRM] (50 C)
[    0.242513] isapnp: Scanning for PnP cards...
[    0.555301] isapnp: No Plug & Play device found
[    0.556993] Linux agpgart interface v0.103
[    0.557179] agpgart-intel 0000:00:00.0: Intel 855GM Chipset
[    0.558119] agpgart-intel 0000:00:00.0: detected 32636K stolen memory
[    0.559812] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
[    0.560196] [drm] Initialized drm 1.1.0 20060810
[    0.560417] pci 0000:00:02.0: power state changed by ACPI to D0
[    0.560941] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[    0.561171] PCI: setting IRQ 11 as level-triggered
[    0.561178] pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[    0.561493] pci 0000:00:02.0: setting latency timer to 64
[    0.565905] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    0.566099] Driver 'sd' needs updating - please use bus_type methods
[    0.566168] Driver 'sr' needs updating - please use bus_type methods
[    0.568546] ata_piix 0000:00:1f.1: version 2.12
[    0.568581] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[    0.570928] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[    0.573211] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[    0.575522] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.579593] ACPI: Battery Slot [BAT1] (battery absent)
[    0.582109] scsi0 : ata_piix
[    0.584579] ACPI: Battery Slot [BAT2] (battery absent)
[    0.586902] scsi1 : ata_piix
[    0.590688] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[    0.592928] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[    0.595267] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOU2] at 0x60,0x64 irq 1,12
[    0.600379] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.602595] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.604874] mice: PS/2 mouse device common for all mice
[    0.607530] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.609761] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.612081] cpuidle: using governor ladder
[    0.614366] cpuidle: using governor menu
[    0.616574] Netfilter messages via NETLINK v0.30.
[    0.619312] ip_tables: (C) 2000-2006 Netfilter Core Team
[    0.621548] Switched to high resolution mode on CPU 0
[    0.621586] TCP cubic registered
[    0.623952] NET: Registered protocol family 10
[    0.626994] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    0.629177] NET: Registered protocol family 17
[    0.631491] Using IPI Shortcut mode
[    0.633886]   Magic number: 5:480:487
[    0.636119] rtc_cmos 00:01: setting system clock to 2009-04-13 15:28:07 UTC (1239636487)
[    0.640995] Marking TSC unstable due to TSC halts in idle
[    0.643771] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.770944] ata1.00: ATA-6: FUJITSU MHT2060AH, 006C, max UDMA/100
[    0.773151] ata1.00: 117210240 sectors, multi 16: LBA
[    0.810884] ata1.00: configured for UDMA/100
[    0.813178] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHT2060A 006C PQ: 0 ANSI: 5
[    0.815473] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.817702] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors: (60.0 GB/55.8 GiB)
[    0.820109] sd 0:0:0:0: [sda] Write Protect is off
[    0.822294] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.822322] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.824649]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
[    0.941364] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.980409] ata2.01: NODEV after polling detection
[    1.000855] ata2.00: ATAPI: UJDA740 DVD/CDRW, 1.20, max UDMA/33
[    1.040877] ata2.00: configured for UDMA/33
[    1.049739] scsi 1:0:0:0: CD-ROM            MATSHITA UJDA740 DVD/CDRW 1.20 PQ: 0 ANSI: 5
[    1.061620] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    1.066696] Uniform CD-ROM driver Revision: 3.20
[    1.071952] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.072086] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.110201] Clocksource tsc unstable (delta = -401116411 ns)
[    1.229329] Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9d48b1, caps: 0x904713/0x4006
[    1.267734] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    1.306148] REISERFS (device sda6): found reiserfs format "3.6" with standard journal
[    1.311555] REISERFS (device sda6): using ordered data mode
[    1.323594] REISERFS (device sda6): journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[    1.335520] REISERFS (device sda6): checking transaction log (sda6)
[    1.384724] REISERFS (device sda6): Using r5 hash to sort names
[    1.390330] VFS: Mounted root (reiserfs filesystem) readonly on device 8:6.
[    1.395893] Freeing unused kernel memory: 288k freed
[    1.940044] async/0 used greatest stack depth: 2440 bytes left
[    2.070039] async/1 used greatest stack depth: 2216 bytes left
[    2.923033] cat used greatest stack depth: 1664 bytes left
[    2.982499] init-early.sh used greatest stack depth: 1464 bytes left
[    5.271495] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[    5.271505] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
[    5.279644] NET: Registered protocol family 23
[    5.280095] usbcore: registered new interface driver usbfs
[    5.280123] usbcore: registered new interface driver hub
[    5.280153] usbcore: registered new device driver usb
[    5.322023] uhci_hcd: USB Universal Host Controller Interface driver
[    5.322107] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[    5.322121] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    5.322126] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    5.322184] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    5.322212] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001820
[    5.322265] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    5.322269] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.322273] usb usb1: Product: UHCI Host Controller
[    5.322276] usb usb1: Manufacturer: Linux 2.6.30-rc1 uhci_hcd
[    5.322279] usb usb1: SerialNumber: 0000:00:1d.0
[    5.322381] usb usb1: configuration #1 chosen from 1 choice
[    5.322420] hub 1-0:1.0: USB hub found
[    5.322428] hub 1-0:1.0: 2 ports detected
[    5.322866] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[    5.322872] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
[    5.322879] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    5.322883] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    5.322915] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[    5.322937] uhci_hcd 0000:00:1d.1: irq 10, io base 0x00001840
[    5.322974] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    5.322978] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.322981] usb usb2: Product: UHCI Host Controller
[    5.322984] usb usb2: Manufacturer: Linux 2.6.30-rc1 uhci_hcd
[    5.322987] usb usb2: SerialNumber: 0000:00:1d.1
[    5.323047] usb usb2: configuration #1 chosen from 1 choice
[    5.323083] hub 2-0:1.0: USB hub found
[    5.323091] hub 2-0:1.0: 2 ports detected
[    5.323187] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[    5.323194] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    5.323198] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    5.323223] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[    5.323243] uhci_hcd 0000:00:1d.2: irq 10, io base 0x00001860
[    5.323278] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    5.323282] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.323285] usb usb3: Product: UHCI Host Controller
[    5.323288] usb usb3: Manufacturer: Linux 2.6.30-rc1 uhci_hcd
[    5.323291] usb usb3: SerialNumber: 0000:00:1d.2
[    5.323355] usb usb3: configuration #1 chosen from 1 choice
[    5.323389] hub 3-0:1.0: USB hub found
[    5.323396] hub 3-0:1.0: 2 ports detected
[    5.338799] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    5.417641] nsc-ircc, chip->init
[    5.417653] nsc-ircc, Found chip at base=0x04e
[    5.417678] nsc-ircc, driver loaded (Dag Brattli)
[    5.418466] IrDA: Registered device irda0
[    5.418526] nsc-ircc, Found dongle: HP HSDL-1100/HSDL-2100
[    5.419124] b44 0000:02:02.0: PCI INT A -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
[    5.456913] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.456919] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[    5.457342] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
[    5.457351] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10
[    5.457378] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    5.457384] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    5.457441] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[    5.461350] ehci_hcd 0000:00:1d.7: debug port 1
[    5.461358] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    5.467726] ehci_hcd 0000:00:1d.7: irq 10, io mem 0xe0100000
[    5.493273] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    5.493345] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    5.493350] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.493355] usb usb4: Product: EHCI Host Controller
[    5.493359] usb usb4: Manufacturer: Linux 2.6.30-rc1 ehci_hcd
[    5.493432] usb usb4: SerialNumber: 0000:00:1d.7
[    5.493599] usb usb4: configuration #1 chosen from 1 choice
[    5.493654] hub 4-0:1.0: USB hub found
[    5.493668] hub 4-0:1.0: 6 ports detected
[    5.530179] ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0
[    5.530224] b44.c:v2.0
[    5.571133] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:c0:9f:2d:03:9d
[    5.576184] udev: renamed network interface eth0 to lan
[    6.100042] usb 3-2: new full speed USB device using uhci_hcd and address 2
[    6.281478] usb 3-2: New USB device found, idVendor=0451, idProduct=2036
[    6.281491] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    6.281501] usb 3-2: Product: General Purpose USB Hub
[    6.281715] usb 3-2: configuration #1 chosen from 1 choice
[    6.294574] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
[    6.294646] Intel ICH 0000:00:1f.5: setting latency timer to 64
[    6.299187] hub 3-2:1.0: USB hub found
[    6.300146] hub 3-2:1.0: 3 ports detected
[    6.581092] usb 3-2.3: new full speed USB device using uhci_hcd and address 3
[    6.719062] usb 3-2.3: New USB device found, idVendor=0483, idProduct=1307
[    6.719072] usb 3-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.719081] usb 3-2.3: Product: USB Mass Storage Device
[    6.719089] usb 3-2.3: Manufacturer: Generic
[    6.719096] usb 3-2.3: SerialNumber: ABCDEF0123456789
[    6.719319] usb 3-2.3: configuration #1 chosen from 1 choice
[    6.783281] Initializing USB Mass Storage driver...
[    6.783492] scsi2 : SCSI emulation for USB Mass Storage devices
[    6.783920] usbcore: registered new interface driver usb-storage
[    6.783930] USB Mass Storage support registered.
[    6.785786] usb-storage: device found at 3
[    6.785794] usb-storage: waiting for device to settle before scanning
[    7.160045] intel8x0_measure_ac97_clock: measured 59888 usecs
[    7.160054] intel8x0: clocking to 48000
[    7.848365] loop: module loaded
[   11.781298] usb-storage: device scan complete
[   11.784293] scsi 2:0:0:0: Direct-Access     Generic  Flash R/W        2002 PQ: 0 ANSI: 2
[   11.785083] sd 2:0:0:0: Attached scsi generic sg2 type 0
[   11.790473] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[   14.463597] SGI XFS with ACLs, security attributes, no debug enabled
[   14.472073] SGI XFS Quota Management subsystem
[   14.540909] XFS mounting filesystem sda9
[   14.658893] Ending clean XFS mount for filesystem: sda9
[   14.683846] REISERFS (device sda10): found reiserfs format "3.6" with standard journal
[   14.683891] REISERFS (device sda10): using ordered data mode
[   14.701317] REISERFS (device sda10): journal params: device sda10, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   14.702434] REISERFS (device sda10): checking transaction log (sda10)
[   14.745925] REISERFS (device sda10): Using r5 hash to sort names
[   14.766035] REISERFS (device sda7): found reiserfs format "3.6" with standard journal
[   14.766076] REISERFS (device sda7): using ordered data mode
[   14.775663] REISERFS (device sda7): journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   14.776643] REISERFS (device sda7): checking transaction log (sda7)
[   14.820843] REISERFS (device sda7): Using r5 hash to sort names
[   14.860513] REISERFS (device sda8): found reiserfs format "3.6" with standard journal
[   14.860555] REISERFS (device sda8): using ordered data mode
[   14.875822] REISERFS (device sda8): journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   14.876741] REISERFS (device sda8): checking transaction log (sda8)
[   14.923066] REISERFS (device sda8): Using r5 hash to sort names
[   15.052737] XFS mounting filesystem loop0
[   15.220713] Ending clean XFS mount for filesystem: loop0
[   15.293966] mount used greatest stack depth: 1432 bytes left
[   17.682682] Adding 1004020k swap on /dev/sda5.  Priority:-1 extents:1 across:1004020k
[   18.834675] ADDRCONF(NETDEV_UP): lan: link is not ready
[   18.985292] 802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
[   18.985297] All bugs added by David S. Miller <[email protected]>
[   19.022449] ADDRCONF(NETDEV_UP): lan.658: link is not ready
[   22.040180] b44: lan: Link is up at 100 Mbps, full duplex.
[   22.040190] b44: lan: Flow control is off for TX and off for RX.
[   22.040362] ADDRCONF(NETDEV_CHANGE): lan: link becomes ready
[   22.041386] ADDRCONF(NETDEV_CHANGE): lan.658: link becomes ready
[   31.131607] RPC: Registered udp transport module.
[   31.131617] RPC: Registered tcp transport module.
[   31.417577] svc: failed to register lockdv1 RPC service (errno 97).
[   31.421659] mount.nfs used greatest stack depth: 1240 bytes left
[   31.681518] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   32.330037] lan.658: no IPv6 routers present
#2 lore raw
Quoted 5 lines · On Tue, 14 April 2009 yakui_zhao <[email protected]> wrote:
Quoted 4 lines · Bruno Prémont

Hi All,

I bisected a boot-hang on Acer TravelMate 66x laptop and ended on commit ff69f2bba67bd45514923aaedbf40fe351787c59.

Quoted 7 lines

Will you please add the boot option of "initcall_debug" and attach the screenshot where it hangs?

It will be great if you can file a new bug at
http://bugzilla.kernel.org/enter_bug.cgi?product=ACPI
and attach the output of acpidump?
Thanks.

Bug created as
http://bugzilla.kernel.org/show_bug.cgi?id=13087

and includes complete boot log (until place where kernel hangs) as well as acpidump output.

Bruno