Skip to contentSkip to conversation

deb-pkg target improvements

PATCH In review Frans Pop 3 participants 21 messages Apr 22, 2009 – May 5, 2009 Kbuild

lore
Share & tools
lore

Frans Pop

author
#0 lore raw

cover deb-pkg target improvements

Here's a new patch series with improvements for the deb-pkg target. It's a compromise that includes both the patches from Maximilian Attems and myself, with some changes because of comments, a few fixes, and further improvements.

The (new) second patch simplifies some of the later patches quite a bit.

Maximilian's patch to add a copyright file turned out to be incomplete: the copyright file did not actually get included in the binary packages. This is fixed in this series.

For patches that are essentially unchanged from Maximilian's earlier set I've left his Signed-of-by. In cases where I made real changes (the copyright patch) I've changed that to myself.

The patch series should still be OK for 2.6.30. I've done a fair bit of testing and in the end the actual impact of the changes is relatively minor.

I still plan to write a doc explaining how the deb-pkg target works if this patch series is accepted.

Maximilian:
This *is* a compromise. I don't expect you to be completely happy (e.g. the source package name), but neither am I (I still feel the script is made more complex than needed for its purpose). I've honestly tried to find a solution that's acceptable to us both.

Cheers,
FJP

Diffstat:

 scripts/package/builddeb |  149 +++++++++++++++++++++++++++++++--------------
 1 files changed, 102 insertions(+), 47 deletions(-)
author
#1 lore raw

PATCH 1/14 deb-pkg: minor general improvements in builddeb script

Minor coding style improvements and typo fix in leading comment.

Cc maximilian attems <[email protected]>
Cc Andres Salomon <[email protected]>
scripts/package/builddeb +10 -11
index 1264b8e..eff7f9d 100644
@@ -4,7 +4,7 @@
 # Copyright 2003 Wichert Akkerman <[email protected]>
 #
 # Simple script to generate a deb package for a Linux kernel. All the
-# complexity of what to do with a kernel after it is installer or removed
+# complexity of what to do with a kernel after it is installed or removed
 # is left to other scripts and packages: they can install scripts in the
 # /etc/kernel/{pre,post}{inst,rm}.d/ directories that will be called on
 # package install and removal.
@@ -13,13 +13,13 @@ set -e
 
 # Some variables and settings used throughout the script
 version=$KERNELRELEASE
-revision=`cat .version`
+revision=$(cat .version)
 tmpdir="$objtree/debian/tmp"
 fwdir="$objtree/debian/fwtmp"
 packagename=linux-$version
 fwpackagename=linux-firmware-image
 
-if [ "$ARCH" == "um" ] ; then
+if [ "$ARCH" = "um" ] ; then
 	packagename=user-mode-linux-$version
 fi
 
@@ -27,12 +27,12 @@ fi
 rm -rf "$tmpdir" "$fwdir"
 mkdir -p "$tmpdir/DEBIAN" "$tmpdir/lib" "$tmpdir/boot"
 mkdir -p "$fwdir/DEBIAN" "$fwdir/lib"
-if [ "$ARCH" == "um" ] ; then
+if [ "$ARCH" = "um" ] ; then
 	mkdir -p "$tmpdir/usr/lib/uml/modules/$version" "$tmpdir/usr/share/doc/$packagename" "$tmpdir/usr/bin"
 fi
 
 # Build and install the kernel
-if [ "$ARCH" == "um" ] ; then
+if [ "$ARCH" = "um" ] ; then
 	$MAKE linux
 	cp System.map "$tmpdir/usr/lib/uml/modules/$version/System.map"
 	cp .config "$tmpdir/usr/share/doc/$packagename/config"
@@ -46,7 +46,7 @@ fi
 
 if grep -q '^CONFIG_MODULES=y' .config ; then
 	INSTALL_MOD_PATH="$tmpdir" make KBUILD_SRC= modules_install
-	if [ "$ARCH" == "um" ] ; then
+	if [ "$ARCH" = "um" ] ; then
 		mv "$tmpdir/lib/modules/$version"/* "$tmpdir/usr/lib/uml/modules/$version/"
 		rmdir "$tmpdir/lib/modules/$version"
 	fi
@@ -77,9 +77,8 @@ linux ($version-$revision) unstable; urgency=low
 EOF
 
 # Generate a control file
-if [ "$ARCH" == "um" ]; then
-
-cat <<EOF > debian/control
+if [ "$ARCH" = "um" ]; then
+	cat <<EOF > debian/control
 Source: linux
 Section: base
 Priority: optional
@@ -101,7 +100,7 @@ Description: User Mode Linux kernel, version $version
 EOF
 
 else
-cat <<EOF > debian/control
+	cat <<EOF > debian/control
 Source: linux
 Section: base
 Priority: optional
@@ -116,6 +115,7 @@ Description: Linux kernel, version $version
  This package contains the Linux kernel, modules and corresponding other
  files version $version
 EOF
+
 fi
 
 # Fix some ownership and permissions
@@ -143,4 +143,3 @@ dpkg-gencontrol -isp -p$packagename
 dpkg --build "$tmpdir" ..
 
 exit 0
-
author
#2 lore raw

PATCH 2/14 deb-pkg: refactor code to reduce duplication

In reply to Frans Pop

Factor out code to build package into separate function and only write "source" section for the debian/control file once.

Cc maximilian attems <[email protected]>
Cc Andres Salomon <[email protected]>

---

Because of this patch some things that needed to be done in two places in later patches in the series now only need to be done once.

scripts/package/builddeb +20 -17
index eff7f9d..feebd69 100644
@@ -11,6 +11,18 @@
 
 set -e
 
+create_package() {
+	local pname="$1" pdir="$2"
+
+	# Fix ownership and permissions
+	chown -R root:root "$pdir"
+	chmod -R go-w "$pdir"
+
+	# Create the package
+	dpkg-gencontrol -isp -p$pname -P"$pdir"
+	dpkg --build "$pdir" ..
+}
+
 # Some variables and settings used throughout the script
 version=$KERNELRELEASE
 revision=$(cat .version)
@@ -77,13 +89,16 @@ linux ($version-$revision) unstable; urgency=low
 EOF
 
 # Generate a control file
-if [ "$ARCH" = "um" ]; then
-	cat <<EOF > debian/control
+cat <<EOF > debian/control
 Source: linux
 Section: base
 Priority: optional
 Maintainer: $name
 Standards-Version: 3.6.1
+EOF
+
+if [ "$ARCH" = "um" ]; then
+	cat <<EOF >> debian/control
 
 Package: $packagename
 Provides: kernel-image-$version, linux-image-$version
@@ -100,12 +115,7 @@ Description: User Mode Linux kernel, version $version
 EOF
 
 else
-	cat <<EOF > debian/control
-Source: linux
-Section: base
-Priority: optional
-Maintainer: $name
-Standards-Version: 3.6.1
+	cat <<EOF >> debian/control
 
 Package: $packagename
 Provides: kernel-image-$version, linux-image-$version
@@ -118,10 +128,6 @@ EOF
 
 fi
 
-# Fix some ownership and permissions
-chown -R root:root "$tmpdir"
-chmod -R go-w "$tmpdir"
-
 # Do we have firmware? Move it out of the way and build it into a package.
 if [ -e "$tmpdir/lib/firmware" ]; then
 	mv "$tmpdir/lib/firmware" "$fwdir/lib/"
@@ -134,12 +140,9 @@ Description: Linux kernel firmware, version $version
  This package contains firmware from the Linux kernel, version $version
 EOF
 
-	dpkg-gencontrol -isp -p$fwpackagename -P"$fwdir"
-	dpkg --build "$fwdir" ..
+	create_package "$fwpackagename" "$fwdir"
 fi
 
-# Perform the final magic
-dpkg-gencontrol -isp -p$packagename
-dpkg --build "$tmpdir" ..
+create_package "$packagename" "$tmpdir"
 
 exit 0
author
#3 lore raw

PATCH 3/14 deb-pkg: fix 'file not found' error when building .deb package for arm

In reply to Frans Pop

Not all architectures prepend the $(boot) path in $(KBUILD_IMAGE). Allow for that fact in the builddeb script. Example is arm.

Cc maximilian attems <[email protected]>
Cc Andres Salomon <[email protected]>
scripts/package/builddeb +4 -1
index feebd69..4876ff3 100644
@@ -53,7 +53,10 @@ if [ "$ARCH" = "um" ] ; then
 else 
 	cp System.map "$tmpdir/boot/System.map-$version"
 	cp .config "$tmpdir/boot/config-$version"
-	cp $KBUILD_IMAGE "$tmpdir/boot/vmlinuz-$version"
+	# Not all arches include the boot path in KBUILD_IMAGE
+	if ! cp $KBUILD_IMAGE "$tmpdir/boot/vmlinuz-$version"; then
+		cp arch/$ARCH/boot/$KBUILD_IMAGE "$tmpdir/boot/vmlinuz-$version"
+	fi
 fi
 
 if grep -q '^CONFIG_MODULES=y' .config ; then
author
#4 lore raw

PATCH 4/14 deb-pkg: pass Debian maintainer script parameters to packaging hook scripts

In reply to Frans Pop

The Debian packaging scripts created by the deb-pkg target do not pass on the standard Debian maintainer script parameters to hook scripts, which means that those scripts cannot tell whether they are being called during e.g. install vs. upgrade, or removal vs. purge of the package.

As there are several variantions in how hook scripts are called from kernel packages, we pass the parameters in the environment variable DEB_MAINT_PARAMS rather than as extra arguments.

Bump version of builddep script to 1.3.

Cc maximilian attems <[email protected]>
Cc Andres Salomon <[email protected]>
scripts/package/builddeb +4 -1
index 4876ff3..5eecbbe 100644
@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-# builddeb 1.2
+# builddeb 1.3
 # Copyright 2003 Wichert Akkerman <[email protected]>
 #
 # Simple script to generate a deb package for a Linux kernel. All the
@@ -75,6 +75,9 @@ for script in postinst postrm preinst prerm ; do
 
 set -e
 
+# Pass maintainer script parameters to hook scripts
+export DEB_MAINT_PARAMS="\$@"
+
 test -d /etc/kernel/$script.d && run-parts --arg="$version" /etc/kernel/$script.d
 exit 0
 EOF
author
#5 lore raw

PATCH 5/14 deb-pkg: allow to specify a custom revision for .deb packages

In reply to Frans Pop

Allow to specify a custom revision for the generated .deb by exporting the environment variable KDEB_PKGVERSION.

Cc maximilian attems <[email protected]>
Cc Andres Salomon <[email protected]>
scripts/package/builddeb +6 -1
index 5eecbbe..5868c0f 100644
@@ -26,6 +26,11 @@ create_package() {
 # Some variables and settings used throughout the script
 version=$KERNELRELEASE
 revision=$(cat .version)
+if [ -n "$KDEB_PKGVERSION" ]; then
+	packageversion=$KDEB_PKGVERSION
+else
+	packageversion=$version-$revision
+fi
 tmpdir="$objtree/debian/tmp"
 fwdir="$objtree/debian/fwtmp"
 packagename=linux-$version
@@ -87,7 +92,7 @@ done
 name="Kernel Compiler <$(id -nu)@$(hostname -f)>"
 # Generate a simple changelog template
 cat <<EOF > debian/changelog
-linux ($version-$revision) unstable; urgency=low
+linux ($packageversion) unstable; urgency=low
 
   * A standard release
 
author
#6 lore raw

PATCH 6/14 deb-pkg: allow alternative hook scripts directory in .deb packages

In reply to Frans Pop

Hook scripts in the default directory /etc/kernel are also executed by official Debian kernel packages as well as kernel packages created using make-kpkg. Allow to specify an alternative hook scripts directory by exporting the environment variable KDEB_HOOKDIR.

Cc maximilian attems <[email protected]>
Cc Andres Salomon <[email protected]>
scripts/package/builddeb +8 -4
index 5868c0f..c01f812 100644
@@ -6,8 +6,9 @@
 # Simple script to generate a deb package for a Linux kernel. All the
 # complexity of what to do with a kernel after it is installed or removed
 # is left to other scripts and packages: they can install scripts in the
-# /etc/kernel/{pre,post}{inst,rm}.d/ directories that will be called on
-# package install and removal.
+# /etc/kernel/{pre,post}{inst,rm}.d/ directories (or an alternative location
+# specified in KDEB_HOOKDIR) that will be called on package install and
+# removal.
 
 set -e
 
@@ -73,8 +74,11 @@ if grep -q '^CONFIG_MODULES=y' .config ; then
 fi
 
 # Install the maintainer scripts
+# Note: hook scripts under /etc/kernel are also executed by official Debian
+# kernel packages, as well as kernel packages built using make-kpkg
+debhookdir=${KDEB_HOOKDIR:-/etc/kernel}
 for script in postinst postrm preinst prerm ; do
-	mkdir -p "$tmpdir/etc/kernel/$script.d"
+	mkdir -p "$tmpdir$debhookdir/$script.d"
 	cat <<EOF > "$tmpdir/DEBIAN/$script"
 #!/bin/sh
 
@@ -83,7 +87,7 @@ set -e
 # Pass maintainer script parameters to hook scripts
 export DEB_MAINT_PARAMS="\$@"
 
-test -d /etc/kernel/$script.d && run-parts --arg="$version" /etc/kernel/$script.d
+test -d $debhookdir/$script.d && run-parts --arg="$version" $debhookdir/$script.d
 exit 0
 EOF
 	chmod 755 "$tmpdir/DEBIAN/$script"
author
#7 lore raw

PATCH 7/14 dep-pkg: improve changelog entry and package descriptions

In reply to Frans Pop
Cc maximilian attems <[email protected]>
Cc Andres Salomon <[email protected]>
scripts/package/builddeb +4 -4
index c01f812..0449147 100644
@@ -98,7 +98,7 @@ name="Kernel Compiler <$(id -nu)@$(hostname -f)>"
 cat <<EOF > debian/changelog
 linux ($packageversion) unstable; urgency=low
 
-  * A standard release
+  * Custom built Linux kernel.
 
  -- $name  $(date -R)
 EOF
@@ -126,7 +126,7 @@ Description: User Mode Linux kernel, version $version
  many other things.
  .
  This package contains the Linux kernel, modules and corresponding other
- files version $version
+ files, version: $version.
 EOF
 
 else
@@ -138,7 +138,7 @@ Suggests: $fwpackagename
 Architecture: any
 Description: Linux kernel, version $version
  This package contains the Linux kernel, modules and corresponding other
- files version $version
+ files, version: $version.
 EOF
 
 fi
@@ -152,7 +152,7 @@ if [ -e "$tmpdir/lib/firmware" ]; then
 Package: $fwpackagename
 Architecture: all
 Description: Linux kernel firmware, version $version
- This package contains firmware from the Linux kernel, version $version
+ This package contains firmware from the Linux kernel, version $version.
 EOF
 
 	create_package "$fwpackagename" "$fwdir"
author
#8 lore raw

PATCH 8/14 deb-pkg: generate debian/copyright file

In reply to Frans Pop

Add a basic debian/copyright to the binary packages.

Based on an earlier patch from Maximilian Attems.

Cc maximilian attems <[email protected]>
Cc Andres Salomon <[email protected]>

---

Original patch did not actually include the copyright file in the binary package. I've also made minor changes in the text of the copyright file.

scripts/package/builddeb +25 -3
index 0449147..2bd12c1 100644
@@ -15,6 +15,8 @@ set -e
 create_package() {
 	local pname="$1" pdir="$2"
 
+	cp debian/copyright "$pdir/usr/share/doc/$pname/"
+
 	# Fix ownership and permissions
 	chown -R root:root "$pdir"
 	chmod -R go-w "$pdir"
@@ -43,10 +45,10 @@ fi
 
 # Setup the directory structure
 rm -rf "$tmpdir" "$fwdir"
-mkdir -p "$tmpdir/DEBIAN" "$tmpdir/lib" "$tmpdir/boot"
-mkdir -p "$fwdir/DEBIAN" "$fwdir/lib"
+mkdir -p "$tmpdir/DEBIAN" "$tmpdir/lib" "$tmpdir/boot" "$tmpdir/usr/share/doc/$packagename"
+mkdir -p "$fwdir/DEBIAN" "$fwdir/lib" "$fwdir/usr/share/doc/$fwpackagename"
 if [ "$ARCH" = "um" ] ; then
-	mkdir -p "$tmpdir/usr/lib/uml/modules/$version" "$tmpdir/usr/share/doc/$packagename" "$tmpdir/usr/bin"
+	mkdir -p "$tmpdir/usr/lib/uml/modules/$version" "$tmpdir/usr/bin"
 fi
 
 # Build and install the kernel
@@ -103,6 +105,26 @@ linux ($packageversion) unstable; urgency=low
  -- $name  $(date -R)
 EOF
 
+# Generate copyright file
+cat <<EOF > debian/copyright
+This is a packacked upstream version of the Linux kernel.
+
+The sources may be found at most Linux ftp sites, including:
+ftp://ftp.kernel.org/pub/linux/kernel
+
+Copyright: 1991 - 2009 Linus Torvalds and others.
+
+The git repository for mainline kernel development is at: 
+git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; version 2 dated June, 1991.
+
+On Debian GNU/Linux systems, the complete text of the GNU General Public
+License version 2 can be found in \`/usr/share/common-licenses/GPL-2'.
+EOF
+
 # Generate a control file
 cat <<EOF > debian/control
 Source: linux
author
#9 lore raw

Re: [PATCH 8/14 v2] deb-pkg: generate debian/copyright file

On Thursday 23 April 2009, Frans Pop wrote:
Add a basic debian/copyright to the binary packages.

Based on an earlier patch from Maximilian Attems.

Cc maximilian attems <[email protected]>
Cc Andres Salomon <[email protected]>

---

Resending as previous version had a trailing space in one line.

scripts/package/builddeb +25 -3
index 0449147..2bd12c1 100644
@@ -15,6 +15,8 @@ set -e
 create_package() {
 	local pname="$1" pdir="$2"
 
+	cp debian/copyright "$pdir/usr/share/doc/$pname/"
+
 	# Fix ownership and permissions
 	chown -R root:root "$pdir"
 	chmod -R go-w "$pdir"
@@ -43,10 +45,10 @@ fi
 
 # Setup the directory structure
 rm -rf "$tmpdir" "$fwdir"
-mkdir -p "$tmpdir/DEBIAN" "$tmpdir/lib" "$tmpdir/boot"
-mkdir -p "$fwdir/DEBIAN" "$fwdir/lib"
+mkdir -p "$tmpdir/DEBIAN" "$tmpdir/lib" "$tmpdir/boot" "$tmpdir/usr/share/doc/$packagename"
+mkdir -p "$fwdir/DEBIAN" "$fwdir/lib" "$fwdir/usr/share/doc/$fwpackagename"
 if [ "$ARCH" = "um" ] ; then
-	mkdir -p "$tmpdir/usr/lib/uml/modules/$version" "$tmpdir/usr/share/doc/$packagename" "$tmpdir/usr/bin"
+	mkdir -p "$tmpdir/usr/lib/uml/modules/$version" "$tmpdir/usr/bin"
 fi
 
 # Build and install the kernel
@@ -103,6 +105,26 @@ linux ($packageversion) unstable; urgency=low
  -- $name  $(date -R)
 EOF
 
+# Generate copyright file
+cat <<EOF > debian/copyright
+This is a packacked upstream version of the Linux kernel.
+
+The sources may be found at most Linux ftp sites, including:
+ftp://ftp.kernel.org/pub/linux/kernel
+
+Copyright: 1991 - 2009 Linus Torvalds and others.
+
+The git repository for mainline kernel development is at:
+git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; version 2 dated June, 1991.
+
+On Debian GNU/Linux systems, the complete text of the GNU General Public
+License version 2 can be found in \`/usr/share/common-licenses/GPL-2'.
+EOF
+
 # Generate a control file
 cat <<EOF > debian/control
 Source: linux
author
#10 lore raw

PATCH 9/14 deb-pkg: improve maintainer identification

In reply to Frans Pop

From: maximilian attems <[email protected]>
Subject: deb-pkg: improve maintainer identification

Try harder to find email and maintainer name.
Debian's own devscripts all use DEBEMAIL or DEBFULLNAME prior to an eventual EMAIL or NAME environment variable. Match their logic.

"Anonymous" sounds nicer then "Kernel Compiler" if no name is found.

---

I've removed some unnecessary braces. Also, "Anonymous Maintainer" seemed somewhat redundant to me; just "Anonymous" should do.

scripts/package/builddeb +19 -3
index 2bd12c1..60f8de2 100644
@@ -95,14 +95,30 @@ EOF
 	chmod 755 "$tmpdir/DEBIAN/$script"
 done
 
-name="Kernel Compiler <$(id -nu)@$(hostname -f)>"
+# Try to determine maintainer and email values
+if [ -n "$DEBEMAIL" ]; then
+       email=$DEBEMAIL
+elif [ -n "$EMAIL" ]; then
+       email=$EMAIL
+else
+       email=$(id -nu)@$(hostname -f)
+fi
+if [ -n "$DEBFULLNAME" ]; then
+       name=$DEBFULLNAME
+elif [ -n "$NAME" ]; then
+       name=$NAME
+else
+       name="Anonymous"
+fi
+maintainer="$name <$email>"
+
 # Generate a simple changelog template
 cat <<EOF > debian/changelog
 linux ($packageversion) unstable; urgency=low
 
   * Custom built Linux kernel.
 
- -- $name  $(date -R)
+ -- $maintainer  $(date -R)
 EOF
 
 # Generate copyright file
@@ -130,7 +146,7 @@ cat <<EOF > debian/control
 Source: linux
 Section: base
 Priority: optional
-Maintainer: $name
+Maintainer: $maintainer
 Standards-Version: 3.6.1
 EOF
 
author
#11 lore raw

PATCH 10/14 deb-pkg: improve Source field

In reply to Frans Pop

The Source: field is defined as the source package in the package archive from which a binary packages are built. As deb-pkg does not generate a source package, we should avoid to use any existing source packages here.

Cc maximilian attems <[email protected]>
Cc Andres Salomon <[email protected]>

---

I still have strong objections to "linux-2.6".
IMO "linux-upstream" is a good compromise: it's clear and avoids both Debian's "linux-2.6" and Ubuntu's "linux".

scripts/package/builddeb +2 -2
index 60f8de2..ebb112d 100644
@@ -114,7 +114,7 @@ maintainer="$name <$email>"
 
 # Generate a simple changelog template
 cat <<EOF > debian/changelog
-linux ($packageversion) unstable; urgency=low
+linux-upstream ($packageversion) unstable; urgency=low
 
   * Custom built Linux kernel.
 
@@ -143,7 +143,7 @@ EOF
 
 # Generate a control file
 cat <<EOF > debian/control
-Source: linux
+Source: linux-upstream
 Section: base
 Priority: optional
 Maintainer: $maintainer
author
#12 lore raw

PATCH 11/14 deb-pkg: fix generated package name

In reply to Frans Pop

From: maximilian attems <[email protected]>
Subject: deb-pkg: fix generated package name

The binary package that make deb-pkg creates is a linux-image. To be fixed may also be the addition of $DEB_ARCH.

scripts/package/builddeb +1 -1
index ebb112d..f8bc361 100644
@@ -36,7 +36,7 @@ else
 fi
 tmpdir="$objtree/debian/tmp"
 fwdir="$objtree/debian/fwtmp"
-packagename=linux-$version
+packagename=linux-image-$version
 fwpackagename=linux-firmware-image
 
 if [ "$ARCH" = "um" ] ; then
author
#13 lore raw

PATCH 12/14 deb-pkg: fix Provides field

In reply to Frans Pop

From: maximilian attems <[email protected]>
Subject: deb-pkg: fix Provides field

kernel-image naming has been dropped for the Lenny release and was only transitional for Etch.

As it builds modules it provides linux-modules-$version.

scripts/package/builddeb +2 -2
index f8bc361..763edcd 100644
@@ -154,7 +154,7 @@ if [ "$ARCH" = "um" ]; then
 	cat <<EOF >> debian/control
 
 Package: $packagename
-Provides: kernel-image-$version, linux-image-$version
+Provides: linux-image, linux-image-2.6, linux-modules-$version
 Architecture: any
 Description: User Mode Linux kernel, version $version
  User-mode Linux is a port of the Linux kernel to its own system call
@@ -171,7 +171,7 @@ else
 	cat <<EOF >> debian/control
 
 Package: $packagename
-Provides: kernel-image-$version, linux-image-$version
+Provides: linux-image, linux-image-2.6, linux-modules-$version
 Suggests: $fwpackagename
 Architecture: any
 Description: Linux kernel, version $version
author
#14 lore raw

PATCH 13/14 deb-pkg: fix Section field

In reply to Frans Pop

From: maximilian attems <[email protected]>
Subject: deb-pkg: fix Section field

Section "base" has been removed, the base is defined by Priority field.

For Squeeze the section should be "kernel", but as that's not yet supported for Sarge and Etch we stay with admin for now.

scripts/package/builddeb +1 -1
index 763edcd..b972d04 100644
@@ -144,7 +144,7 @@ EOF
 # Generate a control file
 cat <<EOF > debian/control
 Source: linux-upstream
-Section: base
+Section: admin
 Priority: optional
 Maintainer: $maintainer
 Standards-Version: 3.6.1
author
#15 lore raw

PATCH 14/14 deb-pkg: bump standards version

In reply to Frans Pop

From: maximilian attems <[email protected]>
Subject: deb-pkg: bump standards version

Latest Debian policy is 3.8.1.
Even if we are not yet compliant to it strive for the latest.

scripts/package/builddeb +1 -1
index b972d04..6faea61 100644
@@ -147,7 +147,7 @@ Source: linux-upstream
 Section: admin
 Priority: optional
 Maintainer: $maintainer
-Standards-Version: 3.6.1
+Standards-Version: 3.8.1
 EOF
 
 if [ "$ARCH" = "um" ]; then
Acked-by on the v1 series
#16 lore raw
In reply to Frans Pop
Quoted 5 lines · Frans Pop

Here's a new patch series with improvements for the deb-pkg target. It's a compromise that includes both the patches from Maximilian Attems and myself, with some changes because of comments, a few fixes, and further improvements.

The (new) second patch simplifies some of the later patches quite a bit.

great!
been currently overworked in coorganising this physics workshop [1]. so had no time to respin all of this.

reviewed and the hole patch serie has an

thanks for taking care of it.

#17 lore raw
Quoted 6 lines · maximilian attems
Quoted 4 lines · Frans Pop

Here's a new patch series with improvements for the deb-pkg target. It's a compromise that includes both the patches from Maximilian Attems and myself, with some changes because of comments, a few fixes, and further improvements.

Quoted 8 lines
Quoted 1 line

The (new) second patch simplifies some of the later patches quite a bit.

great!
been currently overworked in coorganising this physics workshop [1]. so had no time to respin all of this.

reviewed and the hole patch serie has an

Applied the full serie with maximilliam's ack.
Thanks for fixing this!

It is applied to kbuild-next so it will show up in .32.

Sam

#18 lore raw
Quoted 2 lines · Sam Ravnborg

Applied the full serie with maximilliam's ack.
Thanks for fixing this!

thanks for the merge!

Quoted 3 lines

It is applied to kbuild-next so it will show up in .32.

Sam

hmm why .32 and not upcoming .31, seems early enough for that cycle? also you seem to have not pushed out, failed to see the patches in linux-next as of 20090504

#19 lore raw
Quoted 7 lines · maximilian attems
Quoted 2 lines · Sam Ravnborg

Applied the full serie with maximilliam's ack.
Thanks for fixing this!

thanks for the merge!

Quoted 7 lines
Quoted 3 lines

It is applied to kbuild-next so it will show up in .32.

Sam

hmm why .32 and not upcoming .31, seems early enough for that cycle? also you seem to have not pushed out, failed to see the patches in linux-next as of 20090504

I meant .31 - and you are right that I had not pushed out. Done now so soon in -next.

Sam

#20 lore raw
Quoted 4 lines · Sam Ravnborg

I meant .31 - and you are right that I had not pushed out. Done now so soon in -next.

Sam

cool, landed. thanks :)

Signature · 1 line
maks