ubifs: BUG: Blocks commpressed with zlib
PATCH 1/9 ubifs: BUG: Blocks commpressed with zlib
Blocks compressed with zlib are not handled correctly. gunzip decompress blocks with the gzip header, but ubi blocks dont have header.
--- fs/ubifs/ubifs.c | 43 ++++++++++++++++++++++++++++++++++++++++++- fs/ubifs/ubifs.h | 2 -- 2 files changed, 42 insertions(+), 3 deletions(-)
fs/ubifs/ubifs.c +42 -1
@@ -24,6 +24,7 @@*/ #include "ubifs.h" +#include <u-boot/zlib.h> #if !defined(CONFIG_SYS_64BIT_VSPRINTF )#warning Please define CONFIG_SYS_64BIT_VSPRINTF for correct output!
@@ -33,6 +34,10 @@ DECLARE_GLOBAL_DATA_PTR;/* compress.c */ +int ubi_gunzip (void *dst,int dstlen,unsigned char *src,unsigned long *lenp); +void *zalloc (void *,unsigned ,unsigned ); +void zfree (void *,void *,unsigned ); +/* * We need a wrapper for gunzip() because the parameters are * incompatible with the lzo decompressor.
@@ -41,7 +46,7 @@ static int gzip_decompress(const unsigned char *in, size_t in_len, unsigned char *out, size_t *out_len) { unsigned long len = in_len; -return gunzip (out, *out_len, (unsigned char *)in, &len); +return ubi_gunzip (out, *out_len, (unsigned char *)in, &len); }/* Fake description object for the "none" compressor */
@@ -685,3 +690,39 @@ out:ubi_close_volume (c->ubi);return err; } + +int ubi_gunzip (void *dst,int dstlen,unsigned char *src,unsigned long *lenp) +{ +z_stream s; +int r, i, flags; + i=0 ; + + s.zalloc = zalloc; + s.zfree = zfree; +#if defined(CONFIG_HW_WATCHDOG ) || defined(CONFIG_WATCHDOG ) + s.outcb = (cb_func )WATCHDOG_RESET ; +#else + s.outcb =Z_NULL ; +#endif /* CONFIG_HW_WATCHDOG */ + + r =inflateInit2 (&s, -MAX_WBITS ); +if (r !=Z_OK ) { +printf ("Error: inflateInit2() returned %d\n" , r); +return (-1 ); + } + s.next_in = src + i; + s.avail_in = *lenp - i; + s.next_out = dst; + s.avail_out = dstlen; + r =inflate (&s,Z_FINISH ); +if (r !=Z_STREAM_END ) { +//printf ("Error: inflate() returned %d\n", r); +//inflateEnd(&s); +//return (-1); + } + *lenp = s.next_out - (unsigned char *) dst; +inflateEnd (&s); + +return (0 ); + +}
fs/ubifs/ubifs.h +0 -2
@@ -2172,6 +2172,4 @@ int ubifs_decompress(const void *buf, int len, void *out, int *out_len,/* todo: Move these to a common U-Boot header */ int lzo1x_decompress_safe (const unsigned char *in,size_t in_len,unsigned char *out,size_t *out_len); -int gunzip (void *dst,int dstlen,unsigned char *src,unsigned long *lenp); -#endif /* !__UBIFS_H__ */
Signature · 1 line
1.6.2.4
PATCH 9/9 ubifs: Add '\0' to the end of the realpath
--- fs/ubifs/ubifs.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)
fs/ubifs/ubifs.c +2 -0
@@ -646,6 +646,8 @@ int ubifs_load(char *filename, u32 addr, u32 size) ui =ubifs_inode (inode);if (((inode->i_mode &S_IFMT ) ==S_IFLNK ) && ui->data_len) {memcpy (link_name, ui->data, ui->data_len); + link_name[ui->data_len]='\0' ; +memcpy (link_name, ui->data, ui->data_len);printf ("%s is linked to %s!\n" , filename, link_name);ubifs_iput (inode);
Signature · 1 line
1.6.2.4
PATCH 9/9 ubifs: Add '\0' to the end of the realpath
Quoted 1 line · Ricardo Ribalda Delgado
---
First of all your Signed-off-by line is missing. In your other patch as well.
And please add a description of the problem that's fixed with this patch. I've used UBIFS on some boards now and have not seen any problems. Please give an example of what's broken in the current code and fixed with your patch.
fs/ubifs/ubifs.c int ubifs_load(char *filename, u32 addr, u32 size) · line 650
Quoted 13 lines
fs/ubifs/ubifs.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)fs/ubifs/ubifs.c +2
-0@@ -646,6 +646,8 @@ int ubifs_load(char *filename, u32 addr, u32 size) ui =ubifs_inode (inode);if (((inode->i_mode &S_IFMT ) ==S_IFLNK ) && ui->data_len) {memcpy (link_name, ui->data, ui->data_len); + link_name[ui->data_len]='\0' ; +memcpy (link_name, ui->data, ui->data_len);
Hmmm. This looks strange. Didn't you want to remove the first memcpy()?
Thanks.
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
PATCH 1/9 ubifs: BUG: Blocks commpressed with zlib
In reply to Ricardo Ribalda DelgadoQuoted 4 lines · Ricardo Ribalda Delgado
Blocks compressed with zlib are not handled correctly. gunzip decompress blocks with the gzip header, but ubi blocks dont have header.
---
Again, Signed-off-by missing.
More comments below.
Quoted 60 lines
fs/ubifs/ubifs.c | 43 ++++++++++++++++++++++++++++++++++++++++++- fs/ubifs/ubifs.h | 2 -- 2 files changed, 42 insertions(+), 3 deletions(-)fs/ubifs/ubifs.c +7
-1@@ -24,6 +24,7 @@*/ #include "ubifs.h" +#include <u-boot/zlib.h> #if !defined(CONFIG_SYS_64BIT_VSPRINTF )#warning Please define CONFIG_SYS_64BIT_VSPRINTF for correct output!@@ -33,6 +34,10 @@ DECLARE_GLOBAL_DATA_PTR;/* compress.c */ +int ubi_gunzip (void *dst,int dstlen,unsigned char *src,unsigned long *lenp); +void *zalloc(void *, unsigned, unsigned); +void zfree (void *,void *,unsigned ); +/* * We need a wrapper for gunzip() because the parameters are * incompatible with the lzo decompressor. @@ -41,7 +46,7 @@ static int gzip_decompress(const unsigned char *in, size_t in_len, unsigned char *out, size_t *out_len) { unsigned long len = in_len; -return gunzip (out, *out_len, (unsigned char *)in, &len); +return ubi_gunzip (out, *out_len, (unsigned char *)in, &len); }/* Fake description object for the "none" compressor */ @@ -685,3 +690,39 @@ out:ubi_close_volume (c->ubi);return err; } + +int ubi_gunzip(void *dst, int dstlen, unsigned char *src, unsigned long*lenp) +{
fs/ubifs/ubifs.c +17
-0+z_stream s; +int r, i, flags; + i=0 ; + + s.zalloc = zalloc; + s.zfree = zfree; +#if defined(CONFIG_HW_WATCHDOG ) || defined(CONFIG_WATCHDOG ) + s.outcb = (cb_func )WATCHDOG_RESET ; +#else + s.outcb =Z_NULL ; +#endif /* CONFIG_HW_WATCHDOG */ + + r =inflateInit2 (&s, -MAX_WBITS ); +if (r !=Z_OK ) { +printf ("Error: inflateInit2() returned %d\n" , r); +return (-1 ); + }
fs/ubifs/ubifs.c out: · line 722
Quoted 10 lines
fs/ubifs/ubifs.c +10
-0+ s.next_in = src + i; + s.avail_in = *lenp - i; + s.next_out = dst; + s.avail_out = dstlen; + r =inflate (&s,Z_FINISH ); +if (r !=Z_STREAM_END ) { +//printf ("Error: inflate() returned %d\n", r); +//inflateEnd(&s); +//return (-1); + }
Hmmm? Either do something in this if path or remove it completely.
Thanks.
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================