powerpc: compilation error of mace module
Subsystems (2)
Hi there, people.
I am attempting to compile a new kernel for my OldWorld ppc box and I'm having some problems. The first one that appears to happen is the following:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
CC [M] drivers/net/mace.odrivers/net/mace.c: In function ‘mace_probe’:drivers/net/mace.c:210: error: ‘struct net_device’ has no member named ‘open’ drivers/net/mace.c:211: error: ‘struct net_device’ has no member named ‘stop’ drivers/net/mace.c:212: error: ‘struct net_device’ has no member named ‘hard_start_xmit’ drivers/net/mace.c:213: error: ‘struct net_device’ has no member named ‘set_multicast_list’ drivers/net/mace.c:214: error: ‘struct net_device’ has no member named ‘set_mac_address’ make[3]: *** [drivers/net/mace.o] Error 1
make[2]: *** [drivers/net] Error 2
make[1]: *** [drivers] Error 2
make[1]: Leaving directory `/usr/local/media/cross-compile/linux'
make: *** [debian/stamp/build/kernel] Error 2
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Any help is appreciated.
Thanks, Rogério Brito.
Signature · 3 lines
Rogério Brito : rbrito@{mackenzie,ime.usp}.br : GPG key 1024D/7C2CAEB8
http://www.ime.usp.br/~rbrito : http://meusite.mackenzie.com.br/rbrito
Projects: algorithms.berlios.de : lame.sf.net : vrms.alioth.debian.orgDavid Miller
maintainerFrom: Rogério Brito <[email protected]>
Date: Sun, 26 Apr 2009 12:57:09 -0300
Quoted 2 lines
I am attempting to compile a new kernel for my OldWorld ppc box and I'm having some problems. The first one that appears to happen is the following:
Turn on CONFIG_COMPAT_NET_DEV_OPS in your kernel config.
There was no reason for you to turn that off, and you had to have done it explicitly I think :-)
Or, if you're bored, feel free to convert the mace driver over to netdev_ops :-)
PATCH 1/1 powerpc: convert mace to netdev_ops (was: Re: [2.6.30-rc3] powerpc: compilation error of mace module)
Hi, Dave.
Quoted 2 lines · David Miller
Or, if you're bored, feel free to convert the mace driver over to
netdev_ops:-)
Is this anything close to what needs to be done? It's not without failures, because the function mace_set_timeout receives a pointer to a struct net_device, but is marked inline and is used by mace_tx_timeout, which receives an unsigned long (which calls mace_set_timeout).
Perhaps it would be a case of removing the inline hint to the compiler? I guess that BenH or Paul could comment here better...
---
drivers/net/mace.c +11 -5
@@ -89,6 +89,16 @@ static inline void dbdma_reset(volatilestatic inline void mace_clean_rings (struct mace_data *mp);static void __mace_set_address (struct net_device *dev,void *addr); +/* Conversion to netdev_ops. */ +static const struct net_device_ops mace_netdev_ops = { + .ndo_open = mace_open, + .ndo_stop = mace_close, + .ndo_start_xmit = mace_xmit_start, + .ndo_tx_timeout = mace_set_timeout, + .ndo_set_multicast_list = mace_set_multicast, + .ndo_set_mac_address = mace_set_address, +}; +/* * If we can't get a skbuff when we need it, we use this area for DMA. */
@@ -208,11 +217,7 @@ static int __devinit mace_probe(struct m } } - dev->open = mace_open; - dev->stop = mace_close; - dev->hard_start_xmit = mace_xmit_start; - dev->set_multicast_list = mace_set_multicast; - dev->set_mac_address = mace_set_address; + dev->netdev_ops = &mace_netdev_ops;/* * Most of what is below could be moved to mace_open()
Signature · 7 lines
Rogério Brito : rbrito@{mackenzie,ime.usp}.br : GPG key 1024D/7C2CAEB8
http://www.ime.usp.br/~rbrito : http://meusite.mackenzie.com.br/rbrito
Projects: algorithms.berlios.de : lame.sf.net : vrms.alioth.debian.org
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-devDavid Miller
maintainerRe: [PATCH] powerpc: convert mace to netdev_ops
From: Rogério Brito <[email protected]>
Date: Mon, 27 Apr 2009 09:16:33 -0300
Quoted 9 lines
Is this anything close to what needs to be done? It's not without failures, because the function
mace_set_timeoutreceives a pointer to a structnet_device, but is marked inline and is used bymace_tx_timeout, which receives an unsigned long (which callsmace_set_timeout).Perhaps it would be a case of removing the inline hint to the compiler? I guess that BenH or Paul could comment here better...
Signed-off-by Rogério Brito <[email protected]>
You can fix the mace_set_timeout() function arguments by having a helper function that simply wraps around it and provides the second expection of argument types.
Your patch is also wrong, it's missing a lot of netdev_ops entries that are implicitly obtained via alloc_etherdev(), namely:
.ndo_change_mtu = eth_change_mtu,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
Re: [PATCH] powerpc: convert mace to netdev_ops
Hi, Dave.
Quoted 3 lines · David Miller
You can fix the
mace_set_timeout()function arguments by having a helper function that simply wraps around it and provides the second expection of argument types.
Hummm, this means that I'm not that bad... The wrapper function was the first thing that came to my mind, but I just wanted to be as least disruptive as possible.
Quoted 3 lines
Your patch is also wrong, it's missing a lot of
netdev_opsentries that are implicitly obtained viaalloc_etherdev(), namely:
Thanks for pointing those out. I didn't find the documentation about netdev_ops under Documentation (a simple grep didn't turn any results).
Quoted 3 lines
.ndo_change_mtu =
eth_change_mtu,
.ndo_set_mac_address =eth_mac_addr,
.ndo_validate_addr =eth_validate_addr,
Nice. I will incorporate such things.
Thanks, Rogério Brito.
Signature · 7 lines
Rogério Brito : rbrito@{mackenzie,ime.usp}.br : GPG key 1024D/7C2CAEB8
http://www.ime.usp.br/~rbrito : http://meusite.mackenzie.com.br/rbrito
Projects: algorithms.berlios.de : lame.sf.net : vrms.alioth.debian.org
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-devPATCH 1/1 powerpc: convert mace to netdev_ops
In reply to David MillerHi, Dave.
Quoted 3 lines · David Miller
You can fix the
mace_set_timeout()function arguments by having a helper function that simply wraps around it and provides the second expection of argument types.
I hope that this version is a slightly better fix to convert mace to netdev_ops.
This is against this morning's net-2.6 tree.
---
drivers/net/mace.c +21 -5
@@ -89,6 +89,19 @@ static inline void dbdma_reset(volatile struct dbdma_regs __iomem *dma);static inline void mace_clean_rings (struct mace_data *mp);static void __mace_set_address (struct net_device *dev,void *addr); +/* Conversion to netdev_ops. */ +static const struct net_device_ops mace_netdev_ops = { + .ndo_open = mace_open, + .ndo_stop = mace_close, + .ndo_start_xmit = mace_xmit_start, + .ndo_tx_timeout = mace_tx_timeout, + .ndo_set_multicast_list = mace_set_multicast, + .ndo_set_mac_address = mace_set_address, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; +/* * If we can't get a skbuff when we need it, we use this area for DMA. */
@@ -207,11 +220,7 @@ static int __devinit mace_probe(struct macio_dev *mdev, const struct of_device_i } } - dev->open = mace_open; - dev->stop = mace_close; - dev->hard_start_xmit = mace_xmit_start; - dev->set_multicast_list = mace_set_multicast; - dev->set_mac_address = mace_set_address; + dev->netdev_ops = &mace_netdev_ops;/* * Most of what is below could be moved to mace_open()
@@ -798,6 +807,13 @@ static irqreturn_t mace_interrupt(int irq, void *dev_id)return IRQ_HANDLED ; } +/* +* In the following, the parameter "data" is treated like a pointer, +* which is probably OK for 32 bit arches, but not for 64. +* +* (Are mace's found on any newer machines??) -- rbrito +* +*/ static void mace_tx_timeout (unsigned long data) {struct net_device *dev = (struct net_device *) data;
Signature · 3 lines
Rogério Brito : rbrito@{mackenzie,ime.usp}.br : GPG key 1024D/7C2CAEB8
http://www.ime.usp.br/~rbrito : http://meusite.mackenzie.com.br/rbrito
Projects: algorithms.berlios.de : lame.sf.net : vrms.alioth.debian.orgDavid Miller
maintainerRe: [PATCH] powerpc: convert mace to netdev_ops
From: Rogério Brito <[email protected]>
Date: Sun, 3 May 2009 08:48:20 -0300
Quoted 6 lines
I hope that this version is a slightly better fix to convert mace to
netdev_ops.This is against this morning's net-2.6 tree.
Signed-off-by Rogério Brito <[email protected]>
I'll apply this, thanks! I made one change however.
Quoted 4 lines
drivers/net/mace.c +0
-0@@ -798,6 +807,13 @@ static irqreturn_t mace_interrupt(int irq, void *dev_id)return IRQ_HANDLED ; }
drivers/net/mace.c static irqreturn_t mace_interrupt(int irq, void *dev_id) · line 819
Quoted 10 lines
drivers/net/mace.c +7
-0+/* +* In the following, the parameter "data" is treated like a pointer, +* which is probably OK for 32 bit arches, but not for 64. +* +* (Are mace's found on any newer machines??) -- rbrito +* +*/ static void mace_tx_timeout (unsigned long data) {struct net_device *dev = (struct net_device *) data;
I left this new comment out, as this is a common idiom (passing opaque data as an 'unsigned long' argument to a callback) and casting it to a pointer.
It also works perfectly fine on all 32-bit and 64-bit platforms.
David Miller
maintainerRe: [PATCH] powerpc: convert mace to netdev_ops
From: David Miller <[email protected]>
Date: Sun, 03 May 2009 14:15:24 -0700 (PDT)
Quoted 11 lines
From: Rogério Brito <[email protected]>
Date: Sun, 3 May 2009 08:48:20 -0300Quoted 6 lines
I hope that this version is a slightly better fix to convert mace to
netdev_ops.This is against this morning's net-2.6 tree.
Signed-off-by Rogério Brito <[email protected]>I'll apply this, thanks! I made one change however.
Oh, nevermind, it seems that MACE was already converted to netdev_ops some time ago in the net-next-2.6 tree.