w1: ds2760_battery: cleanups in ds2760_battery_probe()
PATCH 1/3 w1: ds2760_battery: cleanups in ds2760_battery_probe()
Removed struct ds2760_platform_data which wasn't defined anywhere. Indentation cleanups.
--- drivers/power/ds2760_battery.c | 16 +++++++--------- 1 files changed, 7 insertions(+), 9 deletions(-)
drivers/power/ds2760_battery.c +7 -9
@@ -344,7 +344,6 @@ static int ds2760_battery_probe(struct platform_device *pdev) {int retval =0 ;struct ds2760_device_info *di; -struct ds2760_platform_data *pdata; di =kzalloc (sizeof (*di),GFP_KERNEL );if (!di) {
@@ -354,14 +353,13 @@ static int ds2760_battery_probe(struct platform_device *pdev)platform_set_drvdata (pdev, di); - pdata = pdev->dev.platform_data; - di->dev = &pdev->dev; - di->w1_dev = pdev->dev.parent; - di->bat.name =dev_name (&pdev->dev); - di->bat.type =POWER_SUPPLY_TYPE_BATTERY ; - di->bat.properties = ds2760_battery_props; - di->bat.num_properties =ARRAY_SIZE (ds2760_battery_props); - di->bat.get_property = ds2760_battery_get_property; + di->dev = &pdev->dev; + di->w1_dev = pdev->dev.parent; + di->bat.name =dev_name (&pdev->dev); + di->bat.type =POWER_SUPPLY_TYPE_BATTERY ; + di->bat.properties = ds2760_battery_props; + di->bat.num_properties =ARRAY_SIZE (ds2760_battery_props); + di->bat.get_property = ds2760_battery_get_property; di->bat.external_power_changed = ds2760_battery_external_power_changed;
Signature · 1 line
1.6.2.1
PATCH 2/3 w1: ds2760: add support for EEPROM read and write
In order to modify the DS2762's status registers and to add support for sleep mode, there is need for functions to write the internal EEPROM.
--- drivers/w1/slaves/w1_ds2760.c | 28 ++++++++++++++++++++++++++++ drivers/w1/slaves/w1_ds2760.h | 2 ++ 2 files changed, 30 insertions(+), 0 deletions(-)
drivers/w1/slaves/w1_ds2760.c +28 -0
@@ -68,6 +68,34 @@ int w1_ds2760_write(struct device *dev, char *buf, int addr, size_t count)return w1_ds2760_io (dev, buf, addr, count,1 ); } +static int w1_ds2760_eeprom_cmd (struct device *dev,int addr,int cmd) +{ + struct w1_slave *sl = container_of(dev, struct w1_slave, dev); + +if (!dev) +return -EINVAL ; + +mutex_lock (&sl->master->mutex); + +if (w1_reset_select_slave (sl) ==0 ) { +w1_write_8 (sl->master, cmd); +w1_write_8 (sl->master, addr); + } + +mutex_unlock (&sl->master->mutex); +return 0 ; +} + +int w1_ds2760_store_eeprom (struct device *dev,int addr) +{ +return w1_ds2760_eeprom_cmd (dev, addr,W1_DS2760_COPY_DATA ); +} + +int w1_ds2760_recall_eeprom (struct device *dev,int addr) +{ +return w1_ds2760_eeprom_cmd (dev, addr,W1_DS2760_RECALL_DATA ); +} +static ssize_t w1_ds2760_read_bin (struct kobject *kobj,struct bin_attribute *bin_attr,char *buf,loff_t off,size_t count)
drivers/w1/slaves/w1_ds2760.h +2 -0
@@ -46,5 +46,7 @@ extern int w1_ds2760_read(struct device *dev, char *buf, int addr, size_t count);extern int w1_ds2760_write (struct device *dev,char *buf,int addr,size_t count); +extern int w1_ds2760_store_eeprom (struct device *dev,int addr); +extern int w1_ds2760_recall_eeprom (struct device *dev,int addr);#endif /* !__w1_ds2760_h__ */
Signature · 1 line
1.6.2.1
PATCH 2/3 w1: ds2760: add support for EEPROM read and write
In order to modify the DS2762's status registers and to add support for sleep mode, there is need for functions to write the internal EEPROM.
---
Ammended version with EXPORT_SYMBOL() for the two new functions.
drivers/w1/slaves/w1_ds2760.c | 30 ++++++++++++++++++++++++++++++ drivers/w1/slaves/w1_ds2760.h | 2 ++ 2 files changed, 32 insertions(+), 0 deletions(-)
drivers/w1/slaves/w1_ds2760.c +30 -0
@@ -68,6 +68,34 @@ int w1_ds2760_write(struct device *dev, char *buf, int addr, size_t count)return w1_ds2760_io (dev, buf, addr, count,1 ); } +static int w1_ds2760_eeprom_cmd (struct device *dev,int addr,int cmd) +{ + struct w1_slave *sl = container_of(dev, struct w1_slave, dev); + +if (!dev) +return -EINVAL ; + +mutex_lock (&sl->master->mutex); + +if (w1_reset_select_slave (sl) ==0 ) { +w1_write_8 (sl->master, cmd); +w1_write_8 (sl->master, addr); + } + +mutex_unlock (&sl->master->mutex); +return 0 ; +} + +int w1_ds2760_store_eeprom (struct device *dev,int addr) +{ +return w1_ds2760_eeprom_cmd (dev, addr,W1_DS2760_COPY_DATA ); +} + +int w1_ds2760_recall_eeprom (struct device *dev,int addr) +{ +return w1_ds2760_eeprom_cmd (dev, addr,W1_DS2760_RECALL_DATA ); +} +static ssize_t w1_ds2760_read_bin (struct kobject *kobj,struct bin_attribute *bin_attr,char *buf,loff_t off,size_t count)
@@ -200,6 +228,8 @@ static void __exit w1_ds2760_exit(void)EXPORT_SYMBOL (w1_ds2760_read);EXPORT_SYMBOL (w1_ds2760_write); +EXPORT_SYMBOL (w1_ds2760_store_eeprom); +EXPORT_SYMBOL (w1_ds2760_recall_eeprom);module_init (w1_ds2760_init);module_exit (w1_ds2760_exit);
drivers/w1/slaves/w1_ds2760.h +2 -0
@@ -46,5 +46,7 @@ extern int w1_ds2760_read(struct device *dev, char *buf, int addr, size_t count);extern int w1_ds2760_write (struct device *dev,char *buf,int addr,size_t count); +extern int w1_ds2760_store_eeprom (struct device *dev,int addr); +extern int w1_ds2760_recall_eeprom (struct device *dev,int addr);#endif /* !__w1_ds2760_h__ */
Signature · 1 line
1.6.2.1
PATCH 3/3 w1: ds2760_battery: add support for sleep mode feature
In reply to Daniel MackThis adds support for ds2760's sleep mode feature. With this feature enabled, the chip enters a deep sleep mode and disconnects from the battery when the w1 line is held down for more than 2 seconds.
This new behaviour can be switched on and off using a new module parameter.
--- drivers/power/ds2760_battery.c | 26 ++++++++++++++++++++++++++ drivers/w1/slaves/w1_ds2760.h | 5 +++++ 2 files changed, 31 insertions(+), 0 deletions(-)
drivers/power/ds2760_battery.c +26 -0
@@ -62,6 +62,10 @@ static unsigned int cache_time = 1000;module_param (cache_time, uint,0644 );MODULE_PARM_DESC (cache_time,"cache time in milliseconds" ); +static unsigned int pmod_enabled; +module_param (pmod_enabled, bool,0644 ); +MODULE_PARM_DESC (pmod_enabled,"PMOD enable bit" ); +/* Some batteries have their rated capacity stored a N * 10 mAh, while * others use an index into this table. */ static int rated_capacities[] = {
@@ -259,6 +263,17 @@ static void ds2760_battery_update_status(struct ds2760_device_info *di)power_supply_changed (&di->bat); } +static void ds2760_battery_write_status (struct ds2760_device_info *di, +char status) +{ +if (status == di->raw[DS2760_STATUS_REG ]) +return ; + +w1_ds2760_write (di->w1_dev, &status,DS2760_STATUS_WRITE_REG ,1 ); +w1_ds2760_store_eeprom (di->w1_dev,DS2760_EEPROM_BLOCK1 ); +w1_ds2760_recall_eeprom (di->w1_dev,DS2760_EEPROM_BLOCK1 ); +} +static void ds2760_battery_work (struct work_struct *work) { struct ds2760_device_info *di = container_of(work,
@@ -342,6 +357,7 @@ static enum power_supply_property ds2760_battery_props[] = {static int ds2760_battery_probe (struct platform_device *pdev) { +char status;int retval =0 ;struct ds2760_device_info *di;
@@ -371,6 +387,16 @@ static int ds2760_battery_probe(struct platform_device *pdev) goto batt_failed; } +/* enable sleep mode feature */ +ds2760_battery_read_status (di); + status = di->raw[DS2760_STATUS_REG ]; +if (pmod_enabled) + status |=DS2760_STATUS_PMOD ; +else + status &= ~DS2760_STATUS_PMOD ; + +ds2760_battery_write_status (di, status); +INIT_DELAYED_WORK (&di->monitor_work, ds2760_battery_work); di->monitor_wqueue =create_singlethread_workqueue (dev_name (&pdev->dev));if (!di->monitor_wqueue) {
drivers/w1/slaves/w1_ds2760.h +5 -0
@@ -25,6 +25,10 @@#define DS2760_PROTECTION_REG 0x00#define DS2760_STATUS_REG 0x01 +#define DS2760_STATUS_IE (1 << 2) +#define DS2760_STATUS_SWEN (1 << 3) +#define DS2760_STATUS_RNAOP (1 << 4) +#define DS2760_STATUS_PMOD (1 << 5)#define DS2760_EEPROM_REG 0x07#define DS2760_SPECIAL_FEATURE_REG 0x08#define DS2760_VOLTAGE_MSB 0x0c
@@ -38,6 +42,7 @@#define DS2760_EEPROM_BLOCK0 0x20#define DS2760_ACTIVE_FULL 0x20#define DS2760_EEPROM_BLOCK1 0x30 +#define DS2760_STATUS_WRITE_REG 0x31#define DS2760_RATED_CAPACITY 0x32#define DS2760_CURRENT_OFFSET_BIAS 0x33#define DS2760_ACTIVE_EMPTY 0x3b
Signature · 1 line
1.6.2.1
Re: [PATCH 3/3] w1: ds2760_battery: add support for sleep mode feature
Quoted 12 lines · Daniel Mack
This adds support for ds2760's sleep mode feature. With this feature enabled, the chip enters a deep sleep mode and disconnects from the battery when the w1 line is held down for more than 2 seconds.
This new behaviour can be switched on and off using a new module parameter.
Cc Szabolcs Gyurko <[email protected]>Cc Matt Reimer <[email protected]>Cc Anton Vorontsov <[email protected]>Signed-off-by Daniel Mack <[email protected]>---
[...]
Quoted 2 lines
drivers/power/ds2760_battery.c +0
-0
[...]
drivers/w1/slaves/w1_ds2760.h line 31
Quoted 12 lines
drivers/w1/slaves/w1_ds2760.h +4
-0@@ -25,6 +25,10 @@#define DS2760_PROTECTION_REG 0x00#define DS2760_STATUS_REG 0x01 +#define DS2760_STATUS_IE (1 << 2) +#define DS2760_STATUS_SWEN (1 << 3) +#define DS2760_STATUS_RNAOP (1 << 4) +#define DS2760_STATUS_PMOD (1 << 5)
The single patch touch battery and w1 trees.
So, Evgeniy, would you mind if I take this patch?
Thanks!
Quoted 13 lines
drivers/w1/slaves/w1_ds2760.h +1
-0#define DS2760_EEPROM_REG 0x07#define DS2760_SPECIAL_FEATURE_REG 0x08#define DS2760_VOLTAGE_MSB 0x0c@@ -38,6 +42,7 @@#define DS2760_EEPROM_BLOCK0 0x20#define DS2760_ACTIVE_FULL 0x20#define DS2760_EEPROM_BLOCK1 0x30 +#define DS2760_STATUS_WRITE_REG 0x31#define DS2760_RATED_CAPACITY 0x32#define DS2760_CURRENT_OFFSET_BIAS 0x33#define DS2760_ACTIVE_EMPTY 0x3bSignature · 1 line
1.6.2.1
Signature · 3 lines
Anton Vorontsov email: [email protected] irc://irc.freenode.net/bd2
Re: [PATCH 3/3] w1: ds2760_battery: add support for sleep mode feature
In reply to Daniel MackQuoted 4 lines · Daniel Mack
This adds support for ds2760's sleep mode feature. With this feature enabled, the chip enters a deep sleep mode and disconnects from the battery when the w1 line is held down for more than 2 seconds.
Quoted 8 lines
This new behaviour can be switched on and off using a new module parameter.
Cc Szabolcs Gyurko <[email protected]>Cc Matt Reimer <[email protected]>Cc Anton Vorontsov <[email protected]>Signed-off-by Daniel Mack <[email protected]>
Ack.
Matt
Re: [PATCH 2/3] w1: ds2760: add support for EEPROM read and write
In reply to Daniel MackQuoted 8 lines · Daniel Mack
In order to modify the DS2762's status registers and to add support for sleep mode, there is need for functions to write the internal EEPROM.
Cc Szabolcs Gyurko <[email protected]>Cc Matt Reimer <[email protected]>Cc Anton Vorontsov <[email protected]>Signed-off-by Daniel Mack <[email protected]>---
Evgeniy, don't mind if I take it via battery-2.6.git tree?
Quoted 58 lines
drivers/w1/slaves/w1_ds2760.c | 28 ++++++++++++++++++++++++++++ drivers/w1/slaves/w1_ds2760.h | 2 ++ 2 files changed, 30 insertions(+), 0 deletions(-)drivers/w1/slaves/w1_ds2760.c +28
-0@@ -68,6 +68,34 @@ int w1_ds2760_write(struct device *dev, char *buf, int addr, size_t count)return w1_ds2760_io (dev, buf, addr, count,1 ); } +static int w1_ds2760_eeprom_cmd (struct device *dev,int addr,int cmd) +{ + struct w1_slave *sl = container_of(dev, struct w1_slave, dev); + +if (!dev) +return -EINVAL ; + +mutex_lock (&sl->master->mutex); + +if (w1_reset_select_slave (sl) ==0 ) { +w1_write_8 (sl->master, cmd); +w1_write_8 (sl->master, addr); + } + +mutex_unlock (&sl->master->mutex); +return 0 ; +} + +int w1_ds2760_store_eeprom (struct device *dev,int addr) +{ +return w1_ds2760_eeprom_cmd (dev, addr,W1_DS2760_COPY_DATA ); +} + +int w1_ds2760_recall_eeprom (struct device *dev,int addr) +{ +return w1_ds2760_eeprom_cmd (dev, addr,W1_DS2760_RECALL_DATA ); +} +static ssize_t w1_ds2760_read_bin (struct kobject *kobj,struct bin_attribute *bin_attr,char *buf,loff_t off,size_t count)drivers/w1/slaves/w1_ds2760.h +2
-0@@ -46,5 +46,7 @@ extern int w1_ds2760_read(struct device *dev, char *buf, int addr, size_t count);extern int w1_ds2760_write (struct device *dev,char *buf,int addr,size_t count); +extern int w1_ds2760_store_eeprom (struct device *dev,int addr); +extern int w1_ds2760_recall_eeprom (struct device *dev,int addr);#endif /* !__w1_ds2760_h__ */ Signature · 1 line
1.6.2.1
Signature · 3 lines
Anton Vorontsov email: [email protected] irc://irc.freenode.net/bd2
Re: [PATCH 2/3] w1: ds2760: add support for EEPROM read and write
Hi Anton.
Quoted 11 lines · Anton Vorontsov
Quoted 8 lines · Daniel Mack
In order to modify the DS2762's status registers and to add support for sleep mode, there is need for functions to write the internal EEPROM.
Cc Szabolcs Gyurko <[email protected]>Cc Matt Reimer <[email protected]>Cc Anton Vorontsov <[email protected]>Signed-off-by Daniel Mack <[email protected]>---
Evgeniy, don't mind if I take it via battery-2.6.git tree?
Looks good, ack!
Feel free to push both patches via battery tree when needed.
Signature · 1 line
Evgeniy Polyakov
Re: [PATCH 2/3] w1: ds2760: add support for EEPROM read and write
In reply to Daniel MackQuoted 8 lines · Daniel Mack
In order to modify the DS2762's status registers and to add support for sleep mode, there is need for functions to write the internal EEPROM.
Cc Szabolcs Gyurko <[email protected]>Cc Matt Reimer <[email protected]>Cc Anton Vorontsov <[email protected]>Signed-off-by Daniel Mack <[email protected]>
Ack.
Matt
Quoted 8 lines · Daniel Mack
Removed struct
ds2760_platform_datawhich wasn't defined anywhere. Indentation cleanups.Cc Szabolcs Gyurko <[email protected]>Cc Matt Reimer <[email protected]>Cc Anton Vorontsov <[email protected]>Signed-off-by Daniel Mack <[email protected]>
Ack.
Matt