ARM DaVinci: Adding DM357 Support
PATCH v2 1/1 ARM DaVinci: Adding DM357 Support
Patch adds Support for DaVinci DM357. This has been tested on a DM357 EVM. It boots of a small page NAND on the EVM.
This SOC is very similar to the DM644x.
The DM357 EVM has 2 NANDs, one small page NAND and another large page NAND. But the device can only boot of the small page NAND. It does not have NOR support. This patch has been tested on the DM357 EVM.
--- MAKEALL | 1 + Makefile | 3 + board/davinci/dm357_evm/Makefile | 52 +++++++++++ board/davinci/dm357_evm/board_init.S | 29 ++++++ board/davinci/dm357_evm/config.mk | 39 +++++++++ board/davinci/dm357_evm/dm357_evm.c | 80 +++++++++++++++++ board/davinci/dm357_evm/u-boot.lds | 52 +++++++++++ include/asm-arm/mach-types.h | 1 + include/configs/davinci_dm357_evm.h | 157 ++++++++++++++++++++++++++++++++++ 9 files changed, 414 insertions(+), 0 deletions(-) create mode 100644 board/davinci/dm357_evm/Makefile create mode 100644 board/davinci/dm357_evm/board_init.S create mode 100644 board/davinci/dm357_evm/config.mk create mode 100644 board/davinci/dm357_evm/dm357_evm.c create mode 100644 board/davinci/dm357_evm/u-boot.lds create mode 100644 include/configs/davinci_dm357_evm.h
MAKEALL +1 -0
@@ -528,6 +528,7 @@ LIST_ARM9=" \ davinci_sffsdr \ davinci_sonata \ davinci_dm355evm \ + davinci_dm357_evm \ " #########################################################################
Makefile +3 -0
@@ -2793,6 +2793,9 @@ davinci_sonata_config : unconfig davinci_dm355evm_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355evm davinci davinci +davinci_dm357_evm_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs dm357_evm davinci davinci + lpd7a400_config \ lpd7a404_config: unconfig @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x
board/davinci/dm357_evm/Makefile new file +52 -0
52 lines not on this page · raw message
board/davinci/dm357_evm/board_init.S new file +29 -0
@@ -0,0 +1,29 @@ +/* + * Copyright (C) 2007 Sergey Kubushyn <[email protected]> + * + * Board-specific low level initialization code. Called at the very end + * of cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no + * initialization required. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> + +.globl dv_board_init +dv_board_init: + + mov pc, lr
board/davinci/dm357_evm/config.mk new file +39 -0
@@ -0,0 +1,39 @@ +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, <[email protected]> +# David Mueller, ELSOFT AG, <[email protected]> +# +# (C) Copyright 2003 +# Texas Instruments, <www.ti.com> +# Swaminathan <[email protected]> +# +# Davinci EVM board (ARM925EJS) cpu +# see http://www.ti.com/ for more information on Texas Instruments +# +# Davinci EVM has 1 bank of 256 MB DDR RAM +# Physical Address: +# 8000'0000 to 9000'0000 +# +# Copyright (C) 2007 Sergey Kubushyn <[email protected]> +# +# Visioneering Corp. Sonata board (ARM926EJS) cpu +# +# Sonata board has 1 bank of 128 MB DDR RAM +# Physical Address: +# 8000'0000 to 8800'0000 +# +# Razorstream, LLC. SCHMOOGIE board (ARM926EJS) cpu +# +# Schmoogie board has 1 bank of 128 MB DDR RAM +# Physical Address: +# 8000'0000 to 8800'0000 +# +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) +# +# we load ourself to 8108 '0000 +# +# + +#Provide at least 16MB spacing between us and the Linux Kernel image +TEXT_BASE = 0x81080000
board/davinci/dm357_evm/dm357_evm.c new file +80 -0
80 lines not on this page · raw message
board/davinci/dm357_evm/u-boot.lds new file +52 -0
52 lines not on this page · raw message
include/asm-arm/mach-types.h +1 -0
@@ -1990,6 +1990,7 @@ extern unsigned int __machine_arch_type;#define MACH_TYPE_BLAZE 2004#define MACH_TYPE_LINKSTATION_LS_HGL 2005#define MACH_TYPE_HTCVENUS 2006 +#define MACH_TYPE_DAVINCI_DM357_EVM 2064#ifdef CONFIG_ARCH_EBSA110 # ifdef machine_arch_type
include/configs/davinci_dm357_evm.h new file +157 -0
157 lines not on this page · raw message
Signature · 1 line
1.6.0.4
PATCH v2 1/1 ARM DaVinci: Adding DM357 Support
board/davinci/dm357_evm/board_init.S
Quoted 4 lines · s-paulraj at ti.com
+.globl?dv_board_init
board/davinci/dm357_evm/board_init.S new file +3
-0+dv_board_init: + +???????mov?????pc, lr
Surely you can eliminate a file containing only such a useless NOP function...
Quoted 1 line
+#define
CONFIG_SOC_DM644X
Hmm, I'd have expected a CONFIG_SOC_DM357. No DSP (and so why were you checking for DSPLINK?) on these chips, right? Just an HMJCP (resembling DM365).
- Dave
Paulraj
PATCH v2 1/1 ARM DaVinci: Adding DM357 Support
Dave,
Please see inline.
Quoted 7 lines
-----Original Message-----
From: David Brownell [mailto:david-b at pacbell.net]
Sent: Wednesday, April 29, 2009 2:09 PM
To: Paulraj, Sandeep; u-boot at lists.denx.de
Cc: davinci-linux-open-source at linux.davincidsp.com
Subject: Re: [PATCH v2] ARM DaVinci: Adding DM357 Support
Quoted 5 lines
board/davinci/dm357_evm/board_init.S
Quoted 4 lines · s-paulraj at ti.com
+.globl?dv_board_init
board/davinci/dm357_evm/board_init.S new file +3
-0+dv_board_init: + +???????mov?????pc, lr
[Sandeep] OK I will remove this
Quoted 6 lines
Surely you can eliminate a file containing only such a useless NOP function...
Quoted 1 line
+#define
CONFIG_SOC_DM644X
[Sandeep] this is correct. It is a type of DM644x.
Quoted 4 lines
Hmm, I'd have expected a
CONFIG_SOC_DM357. No DSP (and so why were you checking for DSPLINK?) on these chips, right? Just an HMJCP (resembling DM365).
[Sandeep] I will remove this
Any other comments?
Quoted 2 lines
- Dave
Thanks,
Sandeep
PATCH v2 1/1 ARM DaVinci: Adding DM357 Support
Quoted 1 line · Sandeep
Any other comments?
Not for now