Skip to contentSkip to conversation

davinci dm6446evm NAND update

PATCH New David Brownell 2 participants 3 messages Apr 29, 2009 – May 1, 2009

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 davinci dm6446evm NAND update

From: David Brownell <[email protected]>

This updates the optional (non-default!) NAND support for the DaVinci DM6446 EVM:

- include MTD partitioning, defaulting to what Linux uses

- use a flash-based BBT, which among other things speeds bootup

This matches code that's now queued for mainline Linux, and might even merge in an upcoming 2.6.30-rc; the MTIDS are set up so that the U-Boot $mtdparts environment variable can be passed as-is on the kernel command line, as a cmdlinepart override.

include/configs/davinci_dvevm.h +5 -0
@@ -119,6 +121,10 @@
 #ifdef CONFIG_SYS_NAND_SMALLPAGE
 #define CONFIG_ENV_SECT_SIZE	512	/* Env sector Size */
 #define CONFIG_ENV_SIZE		SZ_16K
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_MTDPARTS
+#define MTDIDS_DEFAULT		"nand0=davinci_nand.0"
+#define MTDPARTS_DEFAULT	"mtdparts=davinci_nand.0:384k(bootloader)ro,4m(kernel),-(filesystem)"
 #else
 #define CONFIG_ENV_SECT_SIZE	2048	/* Env sector Size */
 #define CONFIG_ENV_SIZE		SZ_128K
@@ -126,6 +132,7 @@
 #define CONFIG_SKIP_LOWLEVEL_INIT	/* U-Boot is loaded by a bootloader */
 #define CONFIG_SKIP_RELOCATE_UBOOT	/* to a proper address, init done */
 #define CONFIG_SYS_NAND_BASE		0x02000000
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
 #define CONFIG_SYS_NAND_HW_ECC
 #define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices */
 #define CONFIG_ENV_OFFSET		0x0	/* Block 0--not used by bootcode */
#1 lore raw

PATCH 1/1 davinci dm6446evm NAND update

Quoted 19 lines · David Brownell

From: David Brownell <[email protected]>

This updates the optional (non-default!) NAND support for the DaVinci DM6446 EVM:

- include MTD partitioning, defaulting to what Linux uses

- use a flash-based BBT, which among other things speeds bootup

This matches code that's now queued for mainline Linux, and might even merge in an upcoming 2.6.30-rc; the MTIDS are set up so that the U-Boot $mtdparts environment variable can be passed as-is on the kernel command line, as a cmdlinepart override.

include/configs/davinci_dvevm.h line 127

Quoted 7 lines
include/configs/davinci_dvevm.h +4 -0
@@ -119,6 +121,10 @@
 #ifdef CONFIG_SYS_NAND_SMALLPAGE
 #define CONFIG_ENV_SECT_SIZE	512	/* Env sector Size */
 #define CONFIG_ENV_SIZE		SZ_16K
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_MTDPARTS
+#define MTDIDS_DEFAULT		"nand0=davinci_nand.0"
+#define MTDPARTS_DEFAULT	"mtdparts=davinci_nand.0:384k(bootloader)ro,4m(kernel),-(filesystem)"

too long please split

Best Regards,
J.

#2 lore raw

PATCH 1/1 davinci dm6446evm NAND update

Quoted 1 line · Jean-Christophe PLAGNIOL-VILLARD

too long please split

Update below.

=== CUT HERE
From: David Brownell <[email protected]>

This updates the optional (non-default!) NAND support for the DaVinci DM6446 EVM:

- include MTD partitioning, defaulting to what Linux uses

- use a flash-based BBT, which among other things speeds bootup

This matches code that's now queued for mainline Linux, and might even merge in an upcoming 2.6.30-rc; and the MTIDS are set up so that the U-Boot $mtdparts environment variable can be passed as-is on the kernel command line as a cmdlinepart override.

---
 include/configs/davinci_dvevm.h |    7 +++++++
 1 file changed, 7 insertions(+)
include/configs/davinci_dvevm.h +7 -0
@@ -119,6 +119,12 @@
 #ifdef CONFIG_SYS_NAND_SMALLPAGE
 #define CONFIG_ENV_SECT_SIZE	512	/* Env sector Size */
 #define CONFIG_ENV_SIZE		SZ_16K
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_MTDPARTS
+#define MTDIDS_DEFAULT		\
+	"nand0=davinci_nand.0"
+#define MTDPARTS_DEFAULT	\
+	"mtdparts=davinci_nand.0:384k(bootloader)ro,4m(kernel),-(filesystem)"
 #else
 #define CONFIG_ENV_SECT_SIZE	2048	/* Env sector Size */
 #define CONFIG_ENV_SIZE		SZ_128K
@@ -126,6 +132,7 @@
 #define CONFIG_SKIP_LOWLEVEL_INIT	/* U-Boot is loaded by a bootloader */
 #define CONFIG_SKIP_RELOCATE_UBOOT	/* to a proper address, init done */
 #define CONFIG_SYS_NAND_BASE		0x02000000
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
 #define CONFIG_SYS_NAND_HW_ECC
 #define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices */
 #define CONFIG_ENV_OFFSET		0x0	/* Block 0--not used by bootcode */