ARM DaVinci:Adding DM365 Support
PATCH 1/1 ARM DaVinci:Adding DM365 Support
Patch adds support for DaVinci DM365.
It does not have the DM9000 like the DM355 but has capability for 4 BIT ECC correction just like DM355.
This patch lacks 2 features
1) No 4 BIT ECC correction. We will add support for 4 BIT ECC correction to the NAND driver(davinci_nand.c) soon so that other device like the DM355 can also use this feature. Other TI SOCs like DA830(Primus) not yet part of the U-Boot GIT can also use this once support is added. Some core NAND driver APIs were changed and are being used by TI in our internal releases but those patches were not accepted when posted to the MTD list. So this support will have to wait for some time.
2) I have managed to get EMAC working in my branch but i see that there are patches where the location of the EMAC driver has changed along with a few other changes. The EMAC on all TI SOCs like DM644x, DM6467, DM365 and DA830 is simlar but not the same. So i need to come up with a patch which will enable EMAC to work on all TI SOCs.
Patches for the above features mentioned will be added soon. Patch for 4 BIT ECC correction and EMAC should not take much time to submit but the feature where we change the NAND read APIs to work along with the EMIF 2.3 IP present in latest DaVinci SOCs will take some time.
--- MAKEALL | 1 + Makefile | 3 + board/davinci/dm365_evm/Makefile | 52 ++++++++++ board/davinci/dm365_evm/board_init.S | 29 ++++++ board/davinci/dm365_evm/config.mk | 39 ++++++++ board/davinci/dm365_evm/dm365_evm.c | 97 +++++++++++++++++++ board/davinci/dm365_evm/u-boot.lds | 52 ++++++++++ cpu/arm926ejs/davinci/Makefile | 1 + cpu/arm926ejs/davinci/dm365.c | 39 ++++++++ include/asm-arm/arch-davinci/hardware.h | 3 + include/configs/davinci_dm365_evm.h | 155 +++++++++++++++++++++++++++++++ 11 files changed, 471 insertions(+), 0 deletions(-) create mode 100644 board/davinci/dm365_evm/Makefile create mode 100644 board/davinci/dm365_evm/board_init.S create mode 100644 board/davinci/dm365_evm/config.mk create mode 100755 board/davinci/dm365_evm/dm365_evm.c create mode 100644 board/davinci/dm365_evm/u-boot.lds create mode 100644 cpu/arm926ejs/davinci/dm365.c create mode 100644 include/configs/davinci_dm365_evm.h
MAKEALL +1 -0
@@ -529,6 +529,7 @@ LIST_ARM9=" \ davinci_sonata \ davinci_dm355evm \ davinci_dm357_evm \ + davinci_dm365_evm \ " #########################################################################
Makefile +3 -0
@@ -2796,6 +2796,9 @@ davinci_dm355evm_config : unconfig davinci_dm357_evm_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs dm357_evm davinci davinci +davinci_dm365_evm_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs dm365_evm davinci davinci + lpd7a400_config \ lpd7a404_config: unconfig @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x
board/davinci/dm365_evm/Makefile new file +52 -0
52 lines not on this page · raw message
board/davinci/dm365_evm/board_init.S new file +29 -0
@@ -0,0 +1,29 @@ +/* + * Copyright (C) 2007 Sergey Kubushyn <[email protected]> + * + * Board-specific low level initialization code. Called at the very end + * of cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no + * initialization required. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> + +.globl dv_board_init +dv_board_init: + + mov pc, lr
board/davinci/dm365_evm/config.mk new file +39 -0
@@ -0,0 +1,39 @@ +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, <[email protected]> +# David Mueller, ELSOFT AG, <[email protected]> +# +# (C) Copyright 2003 +# Texas Instruments, <www.ti.com> +# Swaminathan <[email protected]> +# +# Davinci EVM board (ARM925EJS) cpu +# see http://www.ti.com/ for more information on Texas Instruments +# +# Davinci EVM has 1 bank of 256 MB DDR RAM +# Physical Address: +# 8000'0000 to 9000'0000 +# +# Copyright (C) 2007 Sergey Kubushyn <[email protected]> +# +# Visioneering Corp. Sonata board (ARM926EJS) cpu +# +# Sonata board has 1 bank of 128 MB DDR RAM +# Physical Address: +# 8000'0000 to 8800'0000 +# +# Razorstream, LLC. SCHMOOGIE board (ARM926EJS) cpu +# +# Schmoogie board has 1 bank of 128 MB DDR RAM +# Physical Address: +# 8000'0000 to 8800'0000 +# +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) +# +# we load ourself to 8108 '0000 +# +# + +#Provide at least 16MB spacing between us and the Linux Kernel image +TEXT_BASE = 0x81080000
board/davinci/dm365_evm/dm365_evm.c new file +97 -0
97 lines not on this page · raw message
board/davinci/dm365_evm/u-boot.lds new file +52 -0
52 lines not on this page · raw message
cpu/arm926ejs/davinci/Makefile +1 -0
@@ -30,6 +30,7 @@ LIB = $(obj)lib$(SOC).a COBJS-y += timer.o psc.o COBJS-$(CONFIG_SOC_DM355) += dm355.o COBJS-$(CONFIG_SOC_DM644X) += dm644x.o +COBJS-$(CONFIG_SOC_DM365) += dm365.o COBJS-$(CONFIG_DRIVER_TI_EMAC) += ether.o lxt972.o dp83848.o SOBJS = reset.o
cpu/arm926ejs/davinci/dm365.c new file +39 -0
@@ -0,0 +1,39 @@ +/* +* TI DM365 SOC specific code +* +* Copyright (C) 2009 Texas Instruments +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <common.h> +#include <asm/arch/hardware.h> + + +void davinci_enable_uart0 (void ) +{ +lpsc_on (DAVINCI_LPSC_UART0 ); +} + + +#ifdef CONFIG_DRIVER_DAVINCI_I2C +void davinci_enable_i2c (void ) +{ +lpsc_on (DAVINCI_LPSC_I2C ); +} +#endif
include/asm-arm/arch-davinci/hardware.h +3 -0
@@ -99,6 +99,9 @@ typedef volatile unsigned int * dv_reg_p;#define DAVINCI_ASYNC_EMIF_CNTRL_BASE 0x01e10000#define DAVINCI_MMC_SD0_BASE 0x01e11000 +#elif defined(CONFIG_SOC_DM365 ) +#define DAVINCI_ASYNC_EMIF_CNTRL_BASE 0x01d10000 +#endif /* Power and Sleep Controller (PSC) Domains */
include/configs/davinci_dm365_evm.h new file +155 -0
155 lines not on this page · raw message
Signature · 1 line
1.6.0.4
PATCH 1/1 ARM DaVinci:Adding DM365 Support
Quoted 19 lines · s-paulraj at ti.com
Patch adds support for DaVinci DM365.
It does not have the DM9000 like the DM355 but has capability for 4 BIT ECC correction just like DM355.
This patch lacks 2 features1) No 4 BIT ECC correction. We will add support for 4 BIT ECC correction to the NAND
driver(davinci_nand.c)soon so that other device like the DM355 can also use this feature. Other TI SOCs like DA830(Primus) not yet part of the U-Boot GIT can also use this once support is added. Some core NAND driver APIs were changed and are being used by TI in our internal releases but those patches were not accepted when posted to the MTD list. So this support will have to wait for some time.2) I have managed to get EMAC working in my branch but i see that there are patches where the location of the EMAC driver has changed along with a few other changes. The EMAC on all TI SOCs like DM644x, DM6467, DM365 and DA830 is simlar but not the same. So i need to come up with a patch which will enable EMAC to work on all TI SOCs.
Quoted 4 lines
Patches for the above features mentioned will be added soon. Patch for 4 BIT ECC correction and EMAC should not take much time to submit but the feature where we change the NAND read APIs to work along with the EMIF 2.3 IP present in latest DaVinci SOCs will take some time.
I'm not sure you really want all this comment will be in the final commit message
Quoted 220 lines
Signed-off-by Sandeep Paulraj <[email protected]>--- MAKEALL | 1 + Makefile | 3 + board/davinci/dm365_evm/Makefile | 52 ++++++++++ board/davinci/dm365_evm/board_init.S | 29 ++++++ board/davinci/dm365_evm/config.mk | 39 ++++++++ board/davinci/dm365_evm/dm365_evm.c | 97 +++++++++++++++++++ board/davinci/dm365_evm/u-boot.lds | 52 ++++++++++ cpu/arm926ejs/davinci/Makefile | 1 + cpu/arm926ejs/davinci/dm365.c | 39 ++++++++ include/asm-arm/arch-davinci/hardware.h | 3 + include/configs/davinci_dm365_evm.h | 155 +++++++++++++++++++++++++++++++ 11 files changed, 471 insertions(+), 0 deletions(-) create mode 100644 board/davinci/dm365_evm/Makefile create mode 100644 board/davinci/dm365_evm/board_init.S create mode 100644 board/davinci/dm365_evm/config.mk create mode 100755 board/davinci/dm365_evm/dm365_evm.c create mode 100644 board/davinci/dm365_evm/u-boot.lds create mode 100644 cpu/arm926ejs/davinci/dm365.c create mode 100644 include/configs/davinci_dm365_evm.hMAKEALL +1
-0@@ -529,6 +529,7 @@ LIST_ARM9=" \ davinci_sonata \ davinci_dm355evm \ davinci_dm357_evm \ + davinci_dm365_evm \ " #########################################################################Makefile +3
-0@@ -2796,6 +2796,9 @@ davinci_dm355evm_config : unconfig davinci_dm357_evm_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs dm357_evm davinci davinci +davinci_dm365_evm_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs dm365_evm davinci davinci + lpd7a400_config \ lpd7a404_config: unconfig @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40xboard/davinci/dm365_evm/Makefile new file +52
-0@@ -0,0 +1,52 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd at denx.de. +# +# Copyright (C) 2007 Sergey Kubushyn <[email protected]> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := dm365_evm.o +SOBJS := board_init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### +# This is for $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +#########################################################################board/davinci/dm365_evm/board_init.S new file +29
-0@@ -0,0 +1,29 @@ +/* + * Copyright (C) 2007 Sergey Kubushyn <[email protected]> + * + * Board-specific low level initialization code. Called at the very end + * of cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no + * initialization required. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> + +.globl dv_board_init +dv_board_init: + + mov pc, lrboard/davinci/dm365_evm/config.mk new file +39
-0@@ -0,0 +1,39 @@ +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, <[email protected]> +# David Mueller, ELSOFT AG, <[email protected]> +# +# (C) Copyright 2003 +# Texas Instruments, <www.ti.com> +# Swaminathan <[email protected]> +# +# Davinci EVM board (ARM925EJS) cpu +# see http://www.ti.com/ for more information on Texas Instruments +# +# Davinci EVM has 1 bank of 256 MB DDR RAM +# Physical Address: +# 8000'0000 to 9000'0000 +# +# Copyright (C) 2007 Sergey Kubushyn <[email protected]> +# +# Visioneering Corp. Sonata board (ARM926EJS) cpu +# +# Sonata board has 1 bank of 128 MB DDR RAM +# Physical Address: +# 8000'0000 to 8800'0000 +# +# Razorstream, LLC. SCHMOOGIE board (ARM926EJS) cpu +# +# Schmoogie board has 1 bank of 128 MB DDR RAM +# Physical Address: +# 8000'0000 to 8800'0000 +# +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) +# +# we load ourself to 8108 '0000 +# +# + +#Provide at least 16MB spacing between us and the Linux Kernel image +TEXT_BASE = 0x81080000board/davinci/dm365_evm/dm365_evm.c new file +27
-0@@ -0,0 +1,97 @@ +/* +* +* Copyright (C) 2009 Texas Instruments. +* +* ---------------------------------------------------------------------------- +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +* ---------------------------------------------------------------------------- +* +*/ +#include <common.h> +#include <i2c.h> +#include <asm/arch/hardware.h> +#include <asm/arch/i2c_defs.h> +
board/davinci/dm365_evm/dm365_evm.c line 37
Quoted 10 lines
board/davinci/dm365_evm/dm365_evm.c new file +10
-0+/******************************************* +Routine: board_init +Description: Board Initialization routine +*******************************************/ +int board_init (void ) +{ +DECLARE_GLOBAL_DATA_PTR ; + +/* arch number of DaVinci DM365 */ + gd->bd->bi_arch_number =1939 ;
please use match type
board/davinci/dm365_evm/dm365_evm.c line 40
Quoted 3 lines
board/davinci/dm365_evm/dm365_evm.c new file +3
-0+ +/* adress of boot parameters */ + gd->bd->bi_boot_params =LINUX_BOOT_PARAM_ADDR ;
please use RAM_BASE + 0x100 style as the other arm boards
board/davinci/dm365_evm/dm365_evm.c line 45
Quoted 5 lines
board/davinci/dm365_evm/dm365_evm.c new file +5
-0+ +/* Set the Bus Priority Register to appropriate value */ +REG (VBPR ) =0x20 ; + +timer_init ();
no need please remove
Quoted 21 lines
board/davinci/dm365_evm/dm365_evm.c new file +21
-0+ +return 0 ; +} + + +/****************************** +Routine: misc_init_r +Description: Misc. init +******************************/ +int misc_init_r (void ) +{ +int i; +u_int8_t tmp[20 ], buf[10 ]; + +/* Set Ethernet MAC address from EEPROM */ +if (i2c_read (CONFIG_SYS_I2C_EEPROM_ADDR ,0x7f00 , +CONFIG_SYS_I2C_EEPROM_ADDR_LEN , buf,6 )) { +printf ("\nEEPROM @ 0x%02x read FAILED!!!\n" , +CONFIG_SYS_I2C_EEPROM_ADDR ); + }else { + tmp[0 ] =0xff ;
board/davinci/dm365_evm/dm365_evm.c line 76
Quoted 10 lines
board/davinci/dm365_evm/dm365_evm.c new file +10
-0+for (i =0 ; i <6 ; i++) + tmp[0 ] &= buf[i]; + +if ((tmp[0 ] !=0xff ) && (getenv ("ethaddr" ) ==NULL )) { +sprintf ((char *)&tmp[0 ], +"%02x:%02x:%02x:%02x:%02x:%02x" , buf[0 ], + buf[1 ], buf[2 ], buf[3 ], buf[4 ], buf[5 ]); +setenv ("ethaddr" , (char *)&tmp[0 ]); + } + }
Mike up the ethaddr api please took a look
doc/README.enetaddr
board/davinci/dm365_evm/dm365_evm.c line 79
Quoted 3 lines
board/davinci/dm365_evm/dm365_evm.c new file +3
-0+ +if (!eth_hw_init ()) +printf ("ethernet init failed!\n" );
if it's board specific please implement board_eth_init
otherwise cpu_eth_init and please take a look on the last ben patches about it
board/davinci/dm365_evm/u-boot.lds
Quoted 23 lines
board/davinci/dm365_evm/dm365_evm.c new file +18
-0+ +return 0 ; +} + +/****************************** +Routine: dram_init +Description: Memory Info +******************************/ +int dram_init (void ) +{ +DECLARE_GLOBAL_DATA_PTR ; + + gd->bd->bi_dram[0 ].start =PHYS_SDRAM_1 ; + gd->bd->bi_dram[0 ].size =PHYS_SDRAM_1_SIZE ; + +return 0 ; +} +board/davinci/dm365_evm/u-boot.lds new file +0
-0
as mention on other patch
the davinci seems to use all the same lds
please unify it
Quoted 9 lines
board/davinci/dm365_evm/u-boot.lds new file +8
-0@@ -0,0 +1,52 @@ +/* + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <[email protected]> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or
board/davinci/dm365_evm/u-boot.lds
Quoted 10 lines
board/davinci/dm365_evm/u-boot.lds new file +9
-0+ * modify it under the terms of the GNU General Public License as + +#ifndef __CONFIG_H +#define __CONFIG_H +#include <asm/sizes.h> + +/*=======*/ +/* Board */ +/*=======*/
please use this multiline comment style
/*
*
*/
Quoted 17 lines
board/davinci/dm365_evm/u-boot.lds new file +17
-0+#define CFG_DM365_EVM +#define CONFIG_SYS_USE_NAND +#define CONFIG_SOC_DM365 +/*===================*/ +/* SoC Configuration */ +/*===================*/ +#define CONFIG_ARM926EJS /* arm926ejs CPU core */ +#define CONFIG_SYS_CLK_FREQ 297000000 /* Arm Clock frequency */ +#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ +#define CONFIG_SYS_HZ_CLOCK 24000000 +#define CONFIG_SYS_HZ 1000 +/*====================================================*/ +/* EEPROM definitions for the DM365 EVM */ +/*====================================================*/ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
board/davinci/dm365_evm/u-boot.lds
Quoted 10 lines
board/davinci/dm365_evm/u-boot.lds new file +10
-0+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 +/*=============*/ +/* Memory Info */ +/*=============*/ +#define CONFIG_SYS_MALLOC_LEN (0x40000 + 128*1024) +#define CONFIG_SYS_GBL_DATA_SIZE 128 +#define CONFIG_SYS_MEMTEST_START 0x82000000 +#define CONFIG_SYS_MEMTEST_END 0x90000000 +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define CONFIG_STACKSIZE (256*1024) /* regular stack */
please add a space before and after '*'
board/davinci/dm365_evm/u-boot.lds
Quoted 10 lines
board/davinci/dm365_evm/u-boot.lds new file +10
-0+#define PHYS_SDRAM_1 0x80000000 /* DDR Start */ +#define PHYS_SDRAM_1_SIZE 0x8000000 /* DDR size 128MB */ +/*====================*/ +/* Serial Driver info */ +/*====================*/ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE -4 +#define CONFIG_SYS_NS16550_COM1 0x01c20000 /* Base address of UART0 */ +#define CONFIG_SYS_NS16550_CLK 24000000
CONFIG_SYS_HZ_CLOCK
Quoted 4 lines
board/davinci/dm365_evm/u-boot.lds new file +4
-0+#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ +#define CONFIG_BAUDRATE 115200 /* Default baud rate */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +/*===================*/
board/davinci/dm365_evm/u-boot.lds
Quoted 10 lines
board/davinci/dm365_evm/u-boot.lds new file +10
-0+/* I2C Configuration */ +/*===================*/ +#define CONFIG_HARD_I2C +#define CONFIG_DRIVER_DAVINCI_I2C +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 10 +/*==================================*/ +/* Network & Ethernet Configuration */ +/*==================================*/ +#define CONFIG_DRIVER_TI_EMAC
please take a look on ben patch
Quoted 12 lines
board/davinci/dm365_evm/u-boot.lds new file +12
-0+#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_NET_RETRY_COUNT 10 +/*=====================*/ +/* Flash & Environment */ +/*=====================*/ +#define CONFIG_NAND_DAVINCI +#undef CONFIG_ENV_IS_IN_FLASH +#define CONFIG_SYS_NO_FLASH
board/davinci/dm365_evm/u-boot.lds
Quoted 10 lines
board/davinci/dm365_evm/u-boot.lds new file +10
-0+#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ +#define CONFIG_ENV_SECT_SIZE 0x40000 /* Env sector Size */ +#define CONFIG_ENV_SIZE SZ_256K +#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ +#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ +#define CONFIG_SYS_NAND_BASE 0x02000000 +#define CONFIG_SYS_NAND_HW_ECC +#define CONFIG_SYS_MAX_NAND_DEVICE 2 +#define CONFIG_ENV_OFFSET 0x3C0000 +#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE, \
^^^^^^
whitespace please fix
board/davinci/dm365_evm/u-boot.lds
Quoted 2 lines
board/davinci/dm365_evm/u-boot.lds new file +2
-0+ CONFIG_SYS_NAND_BASE + 0x4000} +#define DEF_BOOTM ""
???
board/davinci/dm365_evm/u-boot.lds
Quoted 3 lines
board/davinci/dm365_evm/u-boot.lds new file +3
-0+/*==============================*/ +/* U-Boot general configuration */ +/*==============================*/
Best Regards,
J.
PATCH 1/1 ARM DaVinci:Adding DM365 Support
Hi J-C,
On Wed, Apr 29, 2009 at 10:54 PM, Jean-Christophe PLAGNIOL-VILLARD < [email protected]> wrote:
<snip>
Quoted 6 lines
include/configs/davinci_dm365_evm.h line 82
Quoted 5 lines
include/configs/davinci_dm365_evm.h new file +4
-0+/*==================================*/ +/* Network & Ethernet Configuration */ +/*==================================*/ +#define CONFIG_DRIVER_TI_EMAC please take a look on ben patch
Quoted 7 lines
include/configs/davinci_dm365_evm.h line 88
Quoted 6 lines
include/configs/davinci_dm365_evm.h new file +6
-0+#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_NET_RETRY_COUNT 10
It has to be this way for now - if he adds CONFIG_NET_MULTI there will be no Ethernet. I think we should take Dave B's advice and use an overall 'next' branch so the ARM and net stuff can be in sync. Maybe Wolfgang will create one if we ask really nicely :)
regards,
Ben
PATCH 1/1 ARM DaVinci:Adding DM365 Support
Quoted 18 lines · Ben Warren
Hi J-C,
On Wed, Apr 29, 2009 at 10:54 PM, Jean-Christophe PLAGNIOL-VILLARD <[email protected]> wrote:
<snip>> +/*==================================*/
> +/* Network & Ethernet Configuration */
> +/*==================================*/
> +#defineCONFIG_DRIVER_TI_EMAC
please take a look on ben patch
> +#defineCONFIG_MII
> +#defineCONFIG_BOOTP_DEFAULT
> +#defineCONFIG_BOOTP_DNS
> +#defineCONFIG_BOOTP_DNS2
> +#defineCONFIG_BOOTP_SEND_HOSTNAME
> +#defineCONFIG_NET_RETRY_COUNT10
Quoted 2 lines
It has to be this way for now - if he adds
CONFIG_NET_MULTIthere will be no Ethernet.
As I've said in your patch thread I've in mind to appy your patch first
Quoted 3 lines
I think we should take Dave B's advice and use an overall
'next' branch so the ARM and net stuff can be in sync. Maybe Wolfgang will create one if we ask really nicely :)
sure
Wolfgang could help us on this?
Best Regards,
J.
PATCH 1/1 ARM DaVinci:Adding DM365 Support
Dear Jean-Christophe PLAGNIOL-VILLARD,
Quoted 7 lines · In message <[email protected]> you wrote:
Quoted 4 lines
I think we should take Dave B's advice and use an overall
'next' branch so the ARM and net stuff can be in sync. Maybe Wolfgang will create one if we ask really nicely :)sure
Wolfgang could help us on this?
You mean like that:
http://git.denx.de/?p=u-boot.git;a=shortlog;h=refs/heads/next
?
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de It is practically impossible to teach good programming style to stu- dents that have had prior exposure to BASIC: as potential programmers they are mentally mutilated beyond hope of regeneration. - Dijkstra
PATCH 1/1 ARM DaVinci:Adding DM365 Support
Hi Wolfgang,
Quoted 10 lines · Wolfgang Denk
Dear Jean-Christophe PLAGNIOL-VILLARD,
Quoted 3 lines · In message <[email protected]> you wrote:
Quoted 3 lines
I think we should take Dave B's advice and use an overall
'next' branch so the ARM and net stuff can be in sync. MaybeWolfgang
Quoted 3 lines
Quoted 1 line
will create one if we ask really nicely :)
sure
Quoted 8 lines
Quoted 1 line
Wolfgang could help us on this?
You mean like that:
http://git.denx.de/?p=u-boot.git;a=shortlog;h=refs/heads/next
?
I'm sorry, I looked before sending this e-mail, but must have been looking in the wrong place. Of course this is exactly what we need and I apologize for the noise.
Quoted 5 lines
Best regards,
Wolfgang Denk
regards,
Ben
Quoted 9 lines
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de It is practically impossible to teach good programming style to stu- dents that have had prior exposure to BASIC: as potential programmers
they are mentally mutilated beyond hope of regeneration. - Dijkstra
PATCH 1/1 ARM DaVinci:Adding DM365 Support
Dear Ben Warren,
Quoted 5 lines · In message <[email protected]> you…
Quoted 5 lines
Quoted 2 lines
Wolfgang could help us on this?
You mean like that:
Quoted 7 lines
I'm sorry, I looked before sending this e-mail, but must have been looking in the wrong place. Of course this is exactly what we need and I apologize for the noise.
You have not been looking at the wrong place. I created the branch upon your request. Maybe my words to inform you about this were ill chosen. Sorry.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Unix: Some say the learning curve is steep, but you only have to climb it once. - Karl Lehenbauer
PATCH 1/1 ARM DaVinci:Adding DM365 Support
Hi Wolfgang,
Quoted 14 lines · Wolfgang Denk
Dear Ben Warren,
In message <[email protected]>
Quoted 10 lines · you
Quoted 9 lines
Quoted 2 lines
Wolfgang could help us on this?
You mean like that:
http://git.denx.de/?p=u-boot.git;a=shortlog;h=refs/heads/next
?
I'm sorry, I looked before sending this e-mail, but must have been
Quoted 9 lines
looking
Quoted 1 line
in the wrong place. Of course this is exactly what we need and I
apologize
Quoted 1 line
for the noise.
You have not been looking at the wrong place. I created the branch upon your request. Maybe my words to inform you about this were ill chosen. Sorry.
No worries. Thanks for doing this!
Quoted 5 lines
Best regards,
Wolfgang Denk
regards,
Ben