Skip to contentSkip to conversation

: IEEE1275 path name escaping...

PATCH New David Miller 1 participant 1 message May 4, 2009

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 : IEEE1275 path name escaping...

Ok, finally GRUB works also on my workstation.

These are the changes that allow GRUB to properly handle "," characters in OF path names.

As we discussed about a month ago, when a "," appears in an OF path name we escape it with "\".

So all of the real work is escaping OF paths as they are given to GRUB, and then un-escaping them when ofdisk tries to open them.

Committed.

PS: I plan to spend the next few days testing what we have now on
a variety of sparc64 systems to make sure all of the most obvious problems get shaken out.

2009-05-04 David S. Miller <[email protected]>

* disk/ieee1275/ofdisk.c (compute_dev_path): New. (grub_ofdisk_open): Use it to un-escape "," characters.
* kern/disk.c (find_part_sep): New. (grub_disk_open): Use it to find the first non-escaped ',' character in the disk name.
* util/ieee1275/devicemap.c (escape_of_path): New. (grub_util_emit_devicemap_entry): Use it.
* util/sparc64/ieee1275/grub-install.in: Update script to strip partition specifiers properly by not triggering on '\' escaped ',' characters.

ieee1275/ofdisk.c +33 -5
Index: disk/ieee1275/ofdisk.c
===================================================================
@@ -115,6 +115,38 @@
   return grub_devalias_iterate (dev_iterate);
 }
 
+static char *
+compute_dev_path (const char *name)
+{
+  char *devpath = grub_malloc (grub_strlen (name) + 2);
+  char *p, c;
+
+  if (!devpath)
+    return NULL;
+
+  /* Un-escape commas. */
+  p = devpath;
+  while ((c = *name++) != '\0')
+    {
+      if (c == '\\' && *name == ',')
+	{
+	  *p++ = ',';
+	  name++;
+	}
+      else
+	*p++ = c;
+    }
+
+  if (! grub_ieee1275_test_flag (GRUB_IEEE1275_FLAG_NO_PARTITION_0))
+    {
+      *p++ = ':';
+      *p++ = '0';
+    }
+  *p++ = '\0';
+
+  return devpath;
+}
+
 static grub_err_t
 grub_ofdisk_open (const char *name, grub_disk_t disk)
 {
@@ -126,14 +158,10 @@
   char prop[64];
   grub_ssize_t actual;
 
-  devpath = grub_strndup (name, grub_strlen (name) + 2);
+  devpath = compute_dev_path (name);
   if (! devpath)
     return grub_errno;
 
-  /* To access the complete disk add `:0'.  */
-  if (! grub_ieee1275_test_flag (GRUB_IEEE1275_FLAG_NO_PARTITION_0))
-    grub_strcat (devpath, ":0");
-
   op = ofdisk_hash_find (devpath);
   if (!op)
     op = ofdisk_hash_add (devpath);
disk.c +20 -2
Index: kern/disk.c
===================================================================
@@ -215,10 +215,28 @@
   return 0;
 }
 
+/* Return the location of the first ',', if any, which is not
+   escaped by a '\'.  */
+static const char *
+find_part_sep (const char *name)
+{
+  const char *p = name;
+  char c;
+
+  while ((c = *p++) != '\0')
+    {
+      if (c == '\\' && *p == ',')
+	p++;
+      else if (c == ',')
+	return p - 1;
+    }
+  return NULL;
+}
+
 grub_disk_t
 grub_disk_open (const char *name)
 {
-  char *p;
+  const char *p;
   grub_disk_t disk;
   grub_disk_dev_t dev;
   char *raw = (char *) name;
@@ -238,7 +256,7 @@
   if (! disk->name)
     goto fail;
   
-  p = grub_strchr (name, ',');
+  p = find_part_sep (name);
   if (p)
     {
       grub_size_t len = p - name;
sparc64/ieee1275/grub-install.in +2 -2
Index: util/sparc64/ieee1275/grub-install.in
===================================================================
@@ -237,8 +237,8 @@
     grub_drive="`$grub_probe --target=drive --device ${grub_device}`"
 
     # Strip partition number
-    install_drive="`echo ${install_drive} | sed -e s/,[0-9]*//g`"
-    grub_drive="`echo ${grub_drive} | sed -e s/,[0-9]*//g`"
+    install_drive="`echo ${install_drive} | sed -e s/\([^\]\),[0-9]*/\1/g`"
+    grub_drive="`echo ${grub_drive} | sed -e s/\([^\]\),[0-9]*/\1/g`"
     if [ "x${grub_drive}" != "x${install_drive}" ] ; then
         uuid="`$grub_probe --target=fs_uuid --device ${grub_device}`"
         if [ "x${uuid}" = "x" ] ; then
sparc64/ieee1275/grub-setup.c +29 -4
Index: util/sparc64/ieee1275/grub-setup.c
===================================================================
@@ -56,7 +56,7 @@
  * device.  It also needs to know the initial block number of
  * 'core' (which is 'diskboot' concatenated with 'kernel' and
  * all the modules, this is created by grub-mkimage).  This resulting
- * 'boot' image is 512 bytes in size and is placed in the first block
+ * 'boot' image is 512 bytes in size and is placed in the second block
  * of a partition.
  *
  * The initial 'diskboot' block acts as a loader for the actual GRUB
@@ -100,6 +100,28 @@
   fflush (stdout);
 }
 
+static char *compute_dest_ofpath (const char *dest)
+{
+  int len = strlen (dest);
+  char *res, *p, c;
+
+  res = xmalloc (len);
+  p = res;
+  while ((c = *dest++) != '\0')
+    {
+      if (c == '\\' && *dest == ',')
+	{
+	  *p++ = ',';
+	  dest++;
+	}
+      else
+	*p++ = c;
+    }
+  *p++ = '\0';
+
+  return res;
+}
+
 static void
 setup (const char *prefix, const char *dir,
        const char *boot_file, const char *core_file,
@@ -110,7 +132,7 @@
   size_t boot_size, core_size;
   grub_uint16_t core_sectors;
   grub_device_t root_dev, dest_dev;
-  char *boot_devpath;
+  char *boot_devpath, *dest_ofpath;
   grub_disk_addr_t *kernel_sector;
   struct boot_blocklist *first_block, *block;
   char *tmp_img;
@@ -170,6 +192,8 @@
       last_length = length;
     }
 
+  dest_ofpath = compute_dest_ofpath (dest);
+
   /* Read the boot image by the OS service.  */
   boot_path = grub_util_get_path (dir, boot_file);
   boot_size = grub_util_get_image_size (boot_path);
@@ -202,7 +226,8 @@
 					   + GRUB_DISK_SECTOR_SIZE
 					   - sizeof (*block));
 
-  grub_util_info ("root is '%s' and dest is '%s'", root, dest);
+  grub_util_info ("root is '%s', dest is '%s', and dest_ofpath is '%s'",
+		  root, dest, dest_ofpath);
 
   /* Open the root device and the destination device.  */
   grub_util_info ("Opening root");
@@ -330,7 +355,7 @@
 
   *kernel_sector = grub_cpu_to_be64 (first_sector);
 
-  strcpy(boot_devpath, dest);
+  strcpy(boot_devpath, dest_ofpath);
 
   grub_util_info ("boot device path %s, prefix is %s, dest is %s",
 		  boot_devpath, prefix, dest);
ieee1275/devicemap.c +35 -1
Index: util/ieee1275/devicemap.c
===================================================================
@@ -1,13 +1,47 @@
 #include <stdio.h>
+#include <string.h>
 #include <grub/types.h>
 #include <grub/util/deviceiter.h>
 #include <grub/util/ofpath.h>
+#include <grub/util/misc.h>
 
+/* Since OF path names can have "," characters in them, and GRUB
+   internally uses "," to indicate partitions (unlike OF which uses
+   ":" for this purpose) we escape such commas.  */
+
+static char *
+escape_of_path (const char *orig_path)
+{
+  char *new_path, *d, c;
+  const char *p;
+
+  if (!strchr (orig_path, ','))
+    return (char *) orig_path;
+
+  new_path = xmalloc (strlen (orig_path) * 2);
+
+  p = orig_path;
+  d = new_path;
+  while ((c = *p++) != '\0')
+    {
+      if (c == ',')
+	*d++ = '\\';
+      *d++ = c;
+    }
+
+  free ((char *) orig_path);
+
+  return new_path;
+}
+
 void
 grub_util_emit_devicemap_entry (FILE *fp, char *name, int is_floppy UNUSED,
 				int *num_fd UNUSED, int *num_hd UNUSED)
 {
-  const char *ofpath = grub_util_devname_to_ofpath (name);
+  const char *orig_path = grub_util_devname_to_ofpath (name);
+  char *ofpath = escape_of_path (orig_path);
 
   fprintf(fp, "(%s)\t%s\n", ofpath, name);
+
+  free (ofpath);
 }