Skip to contentSkip to conversation

bnx2: Fix panic in bnx2_poll_work().

PATCH In review Michael Chan 2 participants 2 messages May 6, 2009

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 bnx2: Fix panic in bnx2_poll_work().

Add barrier() to bnx2_get_hw_{tx|rx}_cons() to fix this issue:

http://bugzilla.kernel.org/show_bug.cgi?id=12698

This issue was reported by multiple i386 users. Without barrier(), the compiled code looks like the following where %eax contains the address of the tx_cons or rx_cons in the DMA status block. The status block contents can change between the cmpb and the movzwl instruction. The driver would crash if the value was not 0xff during the cmpb instruction, but changed to 0xff during the movzwl instruction.

6828: 80 38 ff cmpb $0xff,(%eax)
682b: 0f b7 10 movzwl (%eax),%edx

With the added barrier(), the compiled code now looks correct:

683d:	0f b7 10             	movzwl (%eax),%edx
6840:	0f b6 c2             	movzbl %dl,%eax
6843:	3d ff 00 00 00       	cmp    $0xff,%eax

Thanks to Pascal de Bruijn <[email protected]> for reporting the problem and Holger Noefer <[email protected]> for patiently testing test patches for us.

Also updated version to 2.0.1.

---
 drivers/net/bnx2.c |    6 ++++--
 1 files changed, 4 insertions(+), 2 deletions(-)
drivers/net/bnx2.c +4 -2
index d478391..b0cb29d 100644
@@ -54,8 +54,8 @@
 
 #define DRV_MODULE_NAME		"bnx2"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"2.0.0"
-#define DRV_MODULE_RELDATE	"April 2, 2009"
+#define DRV_MODULE_VERSION	"2.0.1"
+#define DRV_MODULE_RELDATE	"May 6, 2009"
 #define FW_MIPS_FILE_06		"bnx2/bnx2-mips-06-4.6.16.fw"
 #define FW_RV2P_FILE_06		"bnx2/bnx2-rv2p-06-4.6.16.fw"
 #define FW_MIPS_FILE_09		"bnx2/bnx2-mips-09-4.6.17.fw"
@@ -2600,6 +2600,7 @@ bnx2_get_hw_tx_cons(struct bnx2_napi *bnapi)
 	/* Tell compiler that status block fields can change. */
 	barrier();
 	cons = *bnapi->hw_tx_cons_ptr;
+	barrier();
 	if (unlikely((cons & MAX_TX_DESC_CNT) == MAX_TX_DESC_CNT))
 		cons++;
 	return cons;
@@ -2879,6 +2880,7 @@ bnx2_get_hw_rx_cons(struct bnx2_napi *bnapi)
 	/* Tell compiler that status block fields can change. */
 	barrier();
 	cons = *bnapi->hw_rx_cons_ptr;
+	barrier();
 	if (unlikely((cons & MAX_RX_DESC_CNT) == MAX_RX_DESC_CNT))
 		cons++;
 	return cons;
Signature · 1 line
1.5.6.GIT
maintainer
#1 lore raw

From: "Michael Chan" <[email protected]>
Date: Wed, 6 May 2009 10:23:56 -0700

Quoted 11 lines

Add barrier() to bnx2_get_hw_{tx|rx}_cons() to fix this issue:

http://bugzilla.kernel.org/show_bug.cgi?id=12698

This issue was reported by multiple i386 users. Without barrier(), the compiled code looks like the following where %eax contains the address of the tx_cons or rx_cons in the DMA status block. The status block contents can change between the cmpb and the movzwl instruction. The driver would crash if the value was not 0xff during the cmpb instruction, but changed to 0xff during the movzwl instruction.

...

Quoted 1 line

Fair enough, applied, thanks!