Skip to contentSkip to conversation

Linux ATA Trim support

DISCUSSION Clive Wagenaar 2 participants 2 messages May 7, 2009

lore
Share & tools
lore
#0 lore raw

Hi Ubuntu kernel Devs

Could you please advise your thoughts on ATA Trim support in the 9.10, Karmic, kernel for SSD drives.
I am not very clued in as to how far the patches have gotten in the mainline kernel of Linus, but I do believe people are working on it and it is close now.

I recently bought a OCZ Vertex 120G SSD drive, as they are the first SSD manufacturer to be publicly building tools for ATA trim and have indicated that they will have experimental ATA trim support for Linux in their next firmware update expected with 2 weeks.
(Bootchart has 9.04 Juanty booting in 10 seconds off the single ssd of OCZ)

As Windows Vista and 7 do not have ATA trim support yet, they have built a exe tool that can be run by Windows uses that trims the SSD, so far it works reliably on 32 bit versions of windows. linux uses cant use this tool on EXT2/3/4 etc FS from within windows, so a native solution in the kernel is the best way to go for Linux.

OCZ appear to be very proactive with support for ATA Trim, as this is VERY important on SSD drives if one does not periodically want to re-flash ones drive and then restore a image/re-install.

Some info on trim:
http://www.anandtech.com/storage/showdoc.aspx?i=3531&p=10

Please note that this Trim issue affects all SDD including that ones used by Theodore Ts'o and Linus himself. (Intel X25-M)
Once the drive has had data written to most its 'sectors', write speed will drop off drastically and until we have ata trim the only solution is to re-flash the drive.

I am happy to re-flash my drive periodically, but for our Ubuntu for humans, it will be great to have ATA trim in Karmic natively.

I do know the standard is still being finalized, but OCZ are being proactive, the mainline kernel guys are too, so I hoping Ubuntu can be too.

If any one has PPA kernels or Linux trim tools that they need me to test on my OCZ drive, please do not hesitate to ask, I am more than willing to beta test this ATA trim under Linux.
(I went for the OCZ vertex vs X25-M of Intel, due to the fact that OCZ are proactive in their forums and incorporating user feedback into their firmware, plus actively working on ATA trim, for both Windows and Linux)

Thanks for your time

Signature · 9 lines
[email protected]

System Powered by:
Ubuntu/Debian/Gnu/Linux
Distro: Jaunty 9.04
Kernel: 2.6.30-rc4-generic
File System: Ext4
Gnu+Linux user #419390
Ubuntu user #1072
#1 lore raw
Quoted 42 lines · Clive Wagenaar

Hi Ubuntu kernel Devs

Could you please advise your thoughts on ATA Trim support in the 9.10, Karmic, kernel for SSD drives.
I am not very clued in as to how far the patches have gotten in the mainline kernel of Linus, but I do believe people are working on it and it is close now.

I recently bought a OCZ Vertex 120G SSD drive, as they are the first SSD manufacturer to be publicly building tools for ATA trim and have indicated that they will have experimental ATA trim support for Linux in their next firmware update expected with 2 weeks.
(Bootchart has 9.04 Juanty booting in 10 seconds off the single ssd of OCZ)

As Windows Vista and 7 do not have ATA trim support yet, they have built a exe tool that can be run by Windows uses that trims the SSD, so far it works reliably on 32 bit versions of windows. linux uses cant use this tool on EXT2/3/4 etc FS from within windows, so a native solution in the kernel is the best way to go for Linux.

OCZ appear to be very proactive with support for ATA Trim, as this is VERY important on SSD drives if one does not periodically want to re-flash ones drive and then restore a image/re-install.

Some info on trim:
http://www.anandtech.com/storage/showdoc.aspx?i=3531&p=10

Please note that this Trim issue affects all SDD including that ones used by Theodore Ts'o and Linus himself. (Intel X25-M)
Once the drive has had data written to most its 'sectors', write speed will drop off drastically and until we have ata trim the only solution is to re-flash the drive.

I am happy to re-flash my drive periodically, but for our Ubuntu for humans, it will be great to have ATA trim in Karmic natively.

I do know the standard is still being finalized, but OCZ are being proactive, the mainline kernel guys are too, so I hoping Ubuntu can be too.

Quoted 6 lines

If any one has PPA kernels or Linux trim tools that they need me to test on my OCZ drive, please do not hesitate to ask, I am more than willing to beta test this ATA trim under Linux.
(I went for the OCZ vertex vs X25-M of Intel, due to the fact that OCZ are proactive in their forums and incorporating user feedback into their firmware, plus actively working on ATA trim, for both Windows and Linux)

As I understand the current state of play TRIM needs to be supported at both the filesystem level and at the block levels. I believe that ext4 is already meant to support trim, and the block layers beneath. There is just no support for the actual commands at the physical level. Though I thought that that was simply because it was not yet actually standardised. Given the people affected you can be sure the support will appear as soon as any devices which have it appear in the hands of Ted and the like.

As for whether that hits Karmic, that would depend on when it arrives in mainline. If it does not land there soon enough you would probabally be able to test it out using the mainline builds we supply.

-apw