pxa2xx_spi: fix for SPI_CS_HIGH
---------- Forwarded Message ----------
Subject: Re: pxa2xx_spi: fix for SPI_CS_HIGH
Date: Friday 08 May 2009
From: Daniel Ribeiro <[email protected]>
To: David Brownell <david-b-yBeKhBN/[email protected]>
Em Sex, 2009-05-08 às 09:33 -0700, David Brownell escreveu:
Quoted 3 lines
This doesn't need to merge before 2.6.31, right? (That is, is is true that nothing in mainline is yet *relyings* on
CS_HIGHworking with this driver?)
2.6.31 is ok! :)
Quoted 2 lines
Assuming that's true, this patch needs to be updated to apply properly against modebits changes in the MM tree.
Done. Applies after spi-move-more-spi_setup-functionality-into-core.patch.
--
Commit a7bb3909b3293d503211d7f6af8ed62c1644b686 introduces chipselect GPIO, and configures the CS polarity using SPI_CS_HIGH spi->mode flag. Add SPI_CS_HIGH to the allowed modes.
drivers/spi/pxa2xx_spi.c +1 -1
@@ -1482,7 +1482,7 @@ drv_data->ssp = ssp;/* the spi->mode bits understood by this driver: */ - master->mode_bits =SPI_CPOL |SPI_CPHA ; + master->mode_bits =SPI_CPOL |SPI_CPHA |SPI_CS_HIGH ; master->bus_num = pdev->id; master->num_chipselect = platform_info->num_chipselect;
Signature · 11 lines
Daniel Ribeiro ------------------------------------------------------- ------------------------------------------------------------------------------ The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com