Skip to contentSkip to conversation

iproute2: Support for CAN network devices

PATCH In review Wolfgang Grandegger 1 participant 4 messages May 12, 2009 – May 20, 2009

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

cover iproute2: Support for CAN network devices

Hello,

here are the patches for the "ip" program of the iproute2 utility suite adding support for CAN netlinks.

1/2) iproute2: Fixes an issue with cross-compilation 2/2) iproute2: Support for the CAN netlink

The first patch is required to get it cross-compiled.

The patches are based on v2 of the patch series for the Linux kernel with the subject:

[PATCH v2 0/7] can: CAN network device driver interface and drivers

posted a few minutes ago:

http://marc.info/?l=linux-netdev&m=124212048701347&w=2

Please consider these patches for inclusion when the Linux kernel patches have been accepted.

Thanks,

Wolfgang.

#1 lore raw

PATCH 1/2 iproute2: Fixes an issue with cross-compilation

---
 Makefile |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
Makefile +2 -1
Index: iproute2/Makefile
===================================================================
@@ -1,4 +1,5 @@
 DESTDIR=/usr/
+ROOTDIR=$(DESTDIR)
 LIBDIR=/usr/lib/
 SBINDIR=/sbin
 CONFDIR=/etc/iproute2
@@ -7,7 +8,7 @@ MANDIR=/share/man
 ARPDDIR=/var/lib/arpd
 
 # Path to db_185.h include
-DBM_INCLUDE:=/usr/include
+DBM_INCLUDE:=$(ROOTDIR)/usr/include
 
 DEFINES= -DRESOLVE_HOSTNAMES -DLIBDIR=\"$(LIBDIR)\"
 
#2 lore raw

PATCH 2/2 iproute2: Support for the CAN netlink

In reply to Wolfgang Grandegger
---
 include/linux/can/netlink.h |  113 ++++++++++++++++++
 ip/Makefile                 |    2 
 ip/iplink.c                 |    2 
 ip/iplink_can.c             |  264 ++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 379 insertions(+), 2 deletions(-)
ip/Makefile +1 -1
Index: iproute2/ip/Makefile
===================================================================
@@ -2,7 +2,7 @@ IPOBJ=ip.o ipaddress.o ipaddrlabel.o ipr
     rtm_map.o iptunnel.o ip6tunnel.o tunnel.o ipneigh.o ipntable.o iplink.o \
     ipmaddr.o ipmonitor.o ipmroute.o ipprefix.o \
     ipxfrm.o xfrm_state.o xfrm_policy.o xfrm_monitor.o \
-    iplink_vlan.o link_veth.o link_gre.o
+    iplink_vlan.o link_veth.o link_gre.o iplink_can.o
 
 RTMONOBJ=rtmon.o
 
ip/iplink_can.c new file +264 -0

264 lines not on this page · raw message

ip/iplink.c +1 -1
Index: iproute2/ip/iplink.c
===================================================================
@@ -72,7 +72,7 @@ void iplink_usage(void)
 
 	if (iplink_have_newlink()) {
 		fprintf(stderr, "\n");
-		fprintf(stderr, "TYPE := { vlan | veth | vcan | dummy | ifb | macvlan }\n");
+		fprintf(stderr, "TYPE := { vlan | veth | vcan | dummy | ifb | macvlan | can }\n");
 	}
 	exit(-1);
 }
include/linux/can/netlink.h new file +113 -0

113 lines not on this page · raw message

#3 lore raw
In reply to Wolfgang Grandegger
Quoted 13 lines · Wolfgang Grandegger

Hello,

here are the patches for the "ip" program of the iproute2 utility suite adding support for CAN netlinks.

1/2) iproute2: Fixes an issue with cross-compilation 2/2) iproute2: Support for the CAN netlink

The first patch is required to get it cross-compiled.

The patches are based on v2 of the patch series for the Linux kernel with the subject:

Quoted 8 lines

[PATCH v2 0/7] can: CAN network device driver interface and drivers

posted a few minutes ago:

http://marc.info/?l=linux-netdev&m=124212048701347&w=2

Please consider these patches for inclusion when the Linux kernel patches have been accepted.

The mentioned Socket-CAN kernel patches including netlink support have been accepted in the meantime, see:
http://marc.info/?l=linux-netdev&m=124268656617653&w=2

Thanks,

Wolfgang.