Skip to contentSkip to conversation

Prepare the code for Hardware Breakpoint interfaces

PATCH In review K.Prasad 2 participants 27 messages May 15, 2009 – May 26, 2009 1 message not in the archive

Subsystems (4)
lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): 20090515105133.629980476@prasadkr_t60p.in.ibm.com

K.Prasad

author
#1 lore raw

PATCH 1/12 Prepare the code for Hardware Breakpoint interfaces

This patch introduces header files containing constants, structure definitions and declaration of functions used by the hardware breakpoint interface code.

---
 arch/x86/include/asm/debugreg.h      |   29 +++++++
 arch/x86/include/asm/hw_breakpoint.h |   55 +++++++++++++
 arch/x86/include/asm/processor.h     |    8 +-
 include/asm-generic/hw_breakpoint.h  |  139 +++++++++++++++++++++++++++++++++++
 4 files changed, 227 insertions(+), 4 deletions(-)
asm-generic/hw_breakpoint.h new file +139 -0
Index: include/asm-generic/hw_breakpoint.h
===================================================================
@@ -0,0 +1,139 @@
+#ifndef	_ASM_GENERIC_HW_BREAKPOINT_H
+#define	_ASM_GENERIC_HW_BREAKPOINT_H
+
+#ifndef __ARCH_HW_BREAKPOINT_H
+#error "Please don't include this file directly"
+#endif
+
+#ifdef	__KERNEL__
+#include <linux/list.h>
+#include <linux/types.h>
+#include <linux/kallsyms.h>
+
+/**
+ * struct hw_breakpoint - unified kernel/user-space hardware breakpoint
+ * @triggered: callback invoked after target address access
+ * @info: arch-specific breakpoint info (address, length, and type)
+ *
+ * %hw_breakpoint structures are the kernel's way of representing
+ * hardware breakpoints.  These are data breakpoints
+ * (also known as "watchpoints", triggered on data access), and the breakpoint's
+ * target address can be located in either kernel space or user space.
+ *
+ * The breakpoint's address, length, and type are highly
+ * architecture-specific.  The values are encoded in the @info field; you
+ * specify them when registering the breakpoint.  To examine the encoded
+ * values use hw_breakpoint_get_{kaddress,uaddress,len,type}(), declared
+ * below.
+ *
+ * The address is specified as a regular kernel pointer (for kernel-space
+ * breakponts) or as an %__user pointer (for user-space breakpoints).
+ * With register_user_hw_breakpoint(), the address must refer to a
+ * location in user space.  The breakpoint will be active only while the
+ * requested task is running.  Conversely with
+ * register_kernel_hw_breakpoint(), the address must refer to a location
+ * in kernel space, and the breakpoint will be active on all CPUs
+ * regardless of the current task.
+ *
+ * The length is the breakpoint's extent in bytes, which is subject to
+ * certain limitations.  include/asm/hw_breakpoint.h contains macros
+ * defining the available lengths for a specific architecture.  Note that
+ * the address's alignment must match the length.  The breakpoint will
+ * catch accesses to any byte in the range from address to address +
+ * (length - 1).
+ *
+ * The breakpoint's type indicates the sort of access that will cause it
+ * to trigger.  Possible values may include:
+ *
+ * 	%HW_BREAKPOINT_RW (triggered on read or write access),
+ * 	%HW_BREAKPOINT_WRITE (triggered on write access), and
+ * 	%HW_BREAKPOINT_READ (triggered on read access).
+ *
+ * Appropriate macros are defined in include/asm/hw_breakpoint.h; not all
+ * possibilities are available on all architectures.  Execute breakpoints
+ * must have length equal to the special value %HW_BREAKPOINT_LEN_EXECUTE.
+ *
+ * When a breakpoint gets hit, the @triggered callback is
+ * invoked in_interrupt with a pointer to the %hw_breakpoint structure and the
+ * processor registers.
+ * Data breakpoints occur after the memory access has taken place.
+ * Breakpoints are disabled during execution @triggered, to avoid
+ * recursive traps and allow unhindered access to breakpointed memory.
+ *
+ * This sample code sets a breakpoint on pid_max and registers a callback
+ * function for writes to that variable.  Note that it is not portable
+ * as written, because not all architectures support HW_BREAKPOINT_LEN_4.
+ *
+ * ----------------------------------------------------------------------
+ *
+ * #include <asm/hw_breakpoint.h>
+ *
+ * struct hw_breakpoint my_bp;
+ *
+ * static void my_triggered(struct hw_breakpoint *bp, struct pt_regs *regs)
+ * {
+ * 	printk(KERN_DEBUG "Inside triggered routine of breakpoint exception\n");
+ * 	dump_stack();
+ *  	.......<more debugging output>........
+ * }
+ *
+ * static struct hw_breakpoint my_bp;
+ *
+ * static int init_module(void)
+ * {
+ *	..........<do anything>............
+ *	my_bp.info.type = HW_BREAKPOINT_WRITE;
+ *	my_bp.info.len = HW_BREAKPOINT_LEN_4;
+ *
+ *	my_bp.installed = (void *)my_bp_installed;
+ *
+ *	rc = register_kernel_hw_breakpoint(&my_bp);
+ *	..........<do anything>............
+ * }
+ *
+ * static void cleanup_module(void)
+ * {
+ *	..........<do anything>............
+ *	unregister_kernel_hw_breakpoint(&my_bp);
+ *	..........<do anything>............
+ * }
+ *
+ * ----------------------------------------------------------------------
+ */
+struct hw_breakpoint {
+	void (*triggered)(struct hw_breakpoint *, struct pt_regs *);
+	struct arch_hw_breakpoint info;
+};
+
+/*
+ * len and type values are defined in include/asm/hw_breakpoint.h.
+ * Available values vary according to the architecture.  On i386 the
+ * possibilities are:
+ *
+ *	HW_BREAKPOINT_LEN_1
+ *	HW_BREAKPOINT_LEN_2
+ *	HW_BREAKPOINT_LEN_4
+ *	HW_BREAKPOINT_RW
+ *	HW_BREAKPOINT_READ
+ *
+ * On other architectures HW_BREAKPOINT_LEN_8 may be available, and the
+ * 1-, 2-, and 4-byte lengths may be unavailable.  There also may be
+ * HW_BREAKPOINT_WRITE.  You can use #ifdef to check at compile time.
+ */
+
+extern int register_user_hw_breakpoint(struct task_struct *tsk,
+					struct hw_breakpoint *bp);
+extern int modify_user_hw_breakpoint(struct task_struct *tsk,
+					struct hw_breakpoint *bp);
+extern void unregister_user_hw_breakpoint(struct task_struct *tsk,
+						struct hw_breakpoint *bp);
+/*
+ * Kernel breakpoints are not associated with any particular thread.
+ */
+extern int register_kernel_hw_breakpoint(struct hw_breakpoint *bp);
+extern void unregister_kernel_hw_breakpoint(struct hw_breakpoint *bp);
+
+extern unsigned int hbp_kernel_pos;
+
+#endif	/* __KERNEL__ */
+#endif	/* _ASM_GENERIC_HW_BREAKPOINT_H */
x86/include/asm/hw_breakpoint.h new file +55 -0

55 lines not on this page · raw message

x86/include/asm/debugreg.h renamed from x86/include/asm/debugreg.h.orig +29 -0
Index: arch/x86/include/asm/debugreg.h
===================================================================
@@ -18,6 +18,7 @@
 #define DR_TRAP1	(0x2)		/* db1 */
 #define DR_TRAP2	(0x4)		/* db2 */
 #define DR_TRAP3	(0x8)		/* db3 */
+#define DR_TRAP_BITS	(DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3)
 
 #define DR_STEP		(0x4000)	/* single-step */
 #define DR_SWITCH	(0x8000)	/* task switch */
@@ -49,6 +50,8 @@
 
 #define DR_LOCAL_ENABLE_SHIFT 0    /* Extra shift to the local enable bit */
 #define DR_GLOBAL_ENABLE_SHIFT 1   /* Extra shift to the global enable bit */
+#define DR_LOCAL_ENABLE (0x1)      /* Local enable for reg 0 */
+#define DR_GLOBAL_ENABLE (0x2)     /* Global enable for reg 0 */
 #define DR_ENABLE_SIZE 2           /* 2 enable bits per register */
 
 #define DR_LOCAL_ENABLE_MASK (0x55)  /* Set  local bits for all 4 regs */
@@ -67,4 +70,30 @@
 #define DR_LOCAL_SLOWDOWN (0x100)   /* Local slow the pipeline */
 #define DR_GLOBAL_SLOWDOWN (0x200)  /* Global slow the pipeline */
 
+/*
+ * HW breakpoint additions
+ */
+#ifdef __KERNEL__
+
+/* For process management */
+extern void flush_thread_hw_breakpoint(struct task_struct *tsk);
+extern int copy_thread_hw_breakpoint(struct task_struct *tsk,
+		struct task_struct *child, unsigned long clone_flags);
+
+/* For CPU management */
+extern void load_debug_registers(void);
+static inline void hw_breakpoint_disable(void)
+{
+	/* Zero the control register for HW Breakpoint */
+	set_debugreg(0UL, 7);
+
+	/* Zero-out the individual HW breakpoint address registers */
+	set_debugreg(0UL, 0);
+	set_debugreg(0UL, 1);
+	set_debugreg(0UL, 2);
+	set_debugreg(0UL, 3);
+}
+
+#endif	/* __KERNEL__ */
+
 #endif /* _ASM_X86_DEBUGREG_H */
x86/include/asm/processor.h renamed from x86/include/asm/processor.h.orig +4 -4
Index: arch/x86/include/asm/processor.h
===================================================================
@@ -29,6 +29,7 @@ struct mm_struct;
 #include <linux/threads.h>
 #include <linux/init.h>
 
+#define HBP_NUM 4
 /*
  * Default implementation of macro that returns current
  * instruction pointer ("program counter").
@@ -431,12 +432,11 @@ struct thread_struct {
 	unsigned long		fs;
 	unsigned long		gs;
 	/* Hardware debugging registers: */
-	unsigned long		debugreg0;
-	unsigned long		debugreg1;
-	unsigned long		debugreg2;
-	unsigned long		debugreg3;
+	unsigned long		debugreg[HBP_NUM];
 	unsigned long		debugreg6;
 	unsigned long		debugreg7;
+	/* Hardware breakpoint info */
+	struct hw_breakpoint	*hbp[HBP_NUM];
 	/* Fault info: */
 	unsigned long		cr2;
 	unsigned long		trap_no;
author
#2 lore raw

PATCH 1/12 Prepare the code for Hardware Breakpoint interfaces

In reply to a message not in the archive

This patch introduces header files containing constants, structure definitions and declaration of functions used by the hardware breakpoint interface code.

---
 arch/x86/include/asm/debugreg.h      |   29 +++++++
 arch/x86/include/asm/hw_breakpoint.h |   55 +++++++++++++
 arch/x86/include/asm/processor.h     |    8 +-
 include/asm-generic/hw_breakpoint.h  |  139 +++++++++++++++++++++++++++++++++++
 4 files changed, 227 insertions(+), 4 deletions(-)
asm-generic/hw_breakpoint.h new file +139 -0
Index: include/asm-generic/hw_breakpoint.h
===================================================================
@@ -0,0 +1,139 @@
+#ifndef	_ASM_GENERIC_HW_BREAKPOINT_H
+#define	_ASM_GENERIC_HW_BREAKPOINT_H
+
+#ifndef __ARCH_HW_BREAKPOINT_H
+#error "Please don't include this file directly"
+#endif
+
+#ifdef	__KERNEL__
+#include <linux/list.h>
+#include <linux/types.h>
+#include <linux/kallsyms.h>
+
+/**
+ * struct hw_breakpoint - unified kernel/user-space hardware breakpoint
+ * @triggered: callback invoked after target address access
+ * @info: arch-specific breakpoint info (address, length, and type)
+ *
+ * %hw_breakpoint structures are the kernel's way of representing
+ * hardware breakpoints.  These are data breakpoints
+ * (also known as "watchpoints", triggered on data access), and the breakpoint's
+ * target address can be located in either kernel space or user space.
+ *
+ * The breakpoint's address, length, and type are highly
+ * architecture-specific.  The values are encoded in the @info field; you
+ * specify them when registering the breakpoint.  To examine the encoded
+ * values use hw_breakpoint_get_{kaddress,uaddress,len,type}(), declared
+ * below.
+ *
+ * The address is specified as a regular kernel pointer (for kernel-space
+ * breakponts) or as an %__user pointer (for user-space breakpoints).
+ * With register_user_hw_breakpoint(), the address must refer to a
+ * location in user space.  The breakpoint will be active only while the
+ * requested task is running.  Conversely with
+ * register_kernel_hw_breakpoint(), the address must refer to a location
+ * in kernel space, and the breakpoint will be active on all CPUs
+ * regardless of the current task.
+ *
+ * The length is the breakpoint's extent in bytes, which is subject to
+ * certain limitations.  include/asm/hw_breakpoint.h contains macros
+ * defining the available lengths for a specific architecture.  Note that
+ * the address's alignment must match the length.  The breakpoint will
+ * catch accesses to any byte in the range from address to address +
+ * (length - 1).
+ *
+ * The breakpoint's type indicates the sort of access that will cause it
+ * to trigger.  Possible values may include:
+ *
+ * 	%HW_BREAKPOINT_RW (triggered on read or write access),
+ * 	%HW_BREAKPOINT_WRITE (triggered on write access), and
+ * 	%HW_BREAKPOINT_READ (triggered on read access).
+ *
+ * Appropriate macros are defined in include/asm/hw_breakpoint.h; not all
+ * possibilities are available on all architectures.  Execute breakpoints
+ * must have length equal to the special value %HW_BREAKPOINT_LEN_EXECUTE.
+ *
+ * When a breakpoint gets hit, the @triggered callback is
+ * invoked in_interrupt with a pointer to the %hw_breakpoint structure and the
+ * processor registers.
+ * Data breakpoints occur after the memory access has taken place.
+ * Breakpoints are disabled during execution @triggered, to avoid
+ * recursive traps and allow unhindered access to breakpointed memory.
+ *
+ * This sample code sets a breakpoint on pid_max and registers a callback
+ * function for writes to that variable.  Note that it is not portable
+ * as written, because not all architectures support HW_BREAKPOINT_LEN_4.
+ *
+ * ----------------------------------------------------------------------
+ *
+ * #include <asm/hw_breakpoint.h>
+ *
+ * struct hw_breakpoint my_bp;
+ *
+ * static void my_triggered(struct hw_breakpoint *bp, struct pt_regs *regs)
+ * {
+ * 	printk(KERN_DEBUG "Inside triggered routine of breakpoint exception\n");
+ * 	dump_stack();
+ *  	.......<more debugging output>........
+ * }
+ *
+ * static struct hw_breakpoint my_bp;
+ *
+ * static int init_module(void)
+ * {
+ *	..........<do anything>............
+ *	my_bp.info.type = HW_BREAKPOINT_WRITE;
+ *	my_bp.info.len = HW_BREAKPOINT_LEN_4;
+ *
+ *	my_bp.installed = (void *)my_bp_installed;
+ *
+ *	rc = register_kernel_hw_breakpoint(&my_bp);
+ *	..........<do anything>............
+ * }
+ *
+ * static void cleanup_module(void)
+ * {
+ *	..........<do anything>............
+ *	unregister_kernel_hw_breakpoint(&my_bp);
+ *	..........<do anything>............
+ * }
+ *
+ * ----------------------------------------------------------------------
+ */
+struct hw_breakpoint {
+	void (*triggered)(struct hw_breakpoint *, struct pt_regs *);
+	struct arch_hw_breakpoint info;
+};
+
+/*
+ * len and type values are defined in include/asm/hw_breakpoint.h.
+ * Available values vary according to the architecture.  On i386 the
+ * possibilities are:
+ *
+ *	HW_BREAKPOINT_LEN_1
+ *	HW_BREAKPOINT_LEN_2
+ *	HW_BREAKPOINT_LEN_4
+ *	HW_BREAKPOINT_RW
+ *	HW_BREAKPOINT_READ
+ *
+ * On other architectures HW_BREAKPOINT_LEN_8 may be available, and the
+ * 1-, 2-, and 4-byte lengths may be unavailable.  There also may be
+ * HW_BREAKPOINT_WRITE.  You can use #ifdef to check at compile time.
+ */
+
+extern int register_user_hw_breakpoint(struct task_struct *tsk,
+					struct hw_breakpoint *bp);
+extern int modify_user_hw_breakpoint(struct task_struct *tsk,
+					struct hw_breakpoint *bp);
+extern void unregister_user_hw_breakpoint(struct task_struct *tsk,
+						struct hw_breakpoint *bp);
+/*
+ * Kernel breakpoints are not associated with any particular thread.
+ */
+extern int register_kernel_hw_breakpoint(struct hw_breakpoint *bp);
+extern void unregister_kernel_hw_breakpoint(struct hw_breakpoint *bp);
+
+extern unsigned int hbp_kernel_pos;
+
+#endif	/* __KERNEL__ */
+#endif	/* _ASM_GENERIC_HW_BREAKPOINT_H */
x86/include/asm/hw_breakpoint.h new file +55 -0

55 lines not on this page · raw message

x86/include/asm/debugreg.h renamed from x86/include/asm/debugreg.h.orig +29 -0
Index: arch/x86/include/asm/debugreg.h
===================================================================
@@ -18,6 +18,7 @@
 #define DR_TRAP1	(0x2)		/* db1 */
 #define DR_TRAP2	(0x4)		/* db2 */
 #define DR_TRAP3	(0x8)		/* db3 */
+#define DR_TRAP_BITS	(DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3)
 
 #define DR_STEP		(0x4000)	/* single-step */
 #define DR_SWITCH	(0x8000)	/* task switch */
@@ -49,6 +50,8 @@
 
 #define DR_LOCAL_ENABLE_SHIFT 0    /* Extra shift to the local enable bit */
 #define DR_GLOBAL_ENABLE_SHIFT 1   /* Extra shift to the global enable bit */
+#define DR_LOCAL_ENABLE (0x1)      /* Local enable for reg 0 */
+#define DR_GLOBAL_ENABLE (0x2)     /* Global enable for reg 0 */
 #define DR_ENABLE_SIZE 2           /* 2 enable bits per register */
 
 #define DR_LOCAL_ENABLE_MASK (0x55)  /* Set  local bits for all 4 regs */
@@ -67,4 +70,30 @@
 #define DR_LOCAL_SLOWDOWN (0x100)   /* Local slow the pipeline */
 #define DR_GLOBAL_SLOWDOWN (0x200)  /* Global slow the pipeline */
 
+/*
+ * HW breakpoint additions
+ */
+#ifdef __KERNEL__
+
+/* For process management */
+extern void flush_thread_hw_breakpoint(struct task_struct *tsk);
+extern int copy_thread_hw_breakpoint(struct task_struct *tsk,
+		struct task_struct *child, unsigned long clone_flags);
+
+/* For CPU management */
+extern void load_debug_registers(void);
+static inline void hw_breakpoint_disable(void)
+{
+	/* Zero the control register for HW Breakpoint */
+	set_debugreg(0UL, 7);
+
+	/* Zero-out the individual HW breakpoint address registers */
+	set_debugreg(0UL, 0);
+	set_debugreg(0UL, 1);
+	set_debugreg(0UL, 2);
+	set_debugreg(0UL, 3);
+}
+
+#endif	/* __KERNEL__ */
+
 #endif /* _ASM_X86_DEBUGREG_H */
x86/include/asm/processor.h renamed from x86/include/asm/processor.h.orig +4 -4
Index: arch/x86/include/asm/processor.h
===================================================================
@@ -29,6 +29,7 @@ struct mm_struct;
 #include <linux/threads.h>
 #include <linux/init.h>
 
+#define HBP_NUM 4
 /*
  * Default implementation of macro that returns current
  * instruction pointer ("program counter").
@@ -431,12 +432,11 @@ struct thread_struct {
 	unsigned long		fs;
 	unsigned long		gs;
 	/* Hardware debugging registers: */
-	unsigned long		debugreg0;
-	unsigned long		debugreg1;
-	unsigned long		debugreg2;
-	unsigned long		debugreg3;
+	unsigned long		debugreg[HBP_NUM];
 	unsigned long		debugreg6;
 	unsigned long		debugreg7;
+	/* Hardware breakpoint info */
+	struct hw_breakpoint	*hbp[HBP_NUM];
 	/* Fault info: */
 	unsigned long		cr2;
 	unsigned long		trap_no;
author
#3 lore raw

PATCH 2/12 Introducing generic hardware breakpoint handler interfaces

In reply to a message not in the archive

This patch introduces the generic Hardware Breakpoint interfaces for both user and kernel space requests.

---
 arch/Kconfig           |    4 
 kernel/Makefile        |    1 
 kernel/hw_breakpoint.c |  369 +++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 374 insertions(+)
Kconfig renamed from Kconfig.orig +4 -0
Index: arch/Kconfig
===================================================================
@@ -112,3 +112,7 @@ config HAVE_DMA_API_DEBUG
 
 config HAVE_DEFAULT_NO_SPIN_MUTEXES
 	bool
+
+config HAVE_HW_BREAKPOINT
+	bool
+
Makefile renamed from Makefile.orig +1 -0
Index: kernel/Makefile
===================================================================
@@ -97,6 +97,7 @@ obj-$(CONFIG_X86_DS) += trace/
 obj-$(CONFIG_SMP) += sched_cpupri.o
 obj-$(CONFIG_SLOW_WORK) += slow-work.o
 obj-$(CONFIG_PERF_COUNTERS) += perf_counter.o
+obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
 
 ifneq ($(CONFIG_SCHED_OMIT_FRAME_POINTER),y)
 # According to Alan Modra <[email protected]>, the -fno-omit-frame-pointer is
hw_breakpoint.c new file +369 -0

369 lines not on this page · raw message

author
#4 lore raw

PATCH 2/12 Introducing generic hardware breakpoint handler interfaces

In reply to a message not in the archive

This patch introduces the generic Hardware Breakpoint interfaces for both user and kernel space requests.

---
 arch/Kconfig           |    4 
 kernel/Makefile        |    1 
 kernel/hw_breakpoint.c |  369 +++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 374 insertions(+)
Kconfig renamed from Kconfig.orig +4 -0
Index: arch/Kconfig
===================================================================
@@ -112,3 +112,7 @@ config HAVE_DMA_API_DEBUG
 
 config HAVE_DEFAULT_NO_SPIN_MUTEXES
 	bool
+
+config HAVE_HW_BREAKPOINT
+	bool
+
Makefile renamed from Makefile.orig +1 -0
Index: kernel/Makefile
===================================================================
@@ -97,6 +97,7 @@ obj-$(CONFIG_X86_DS) += trace/
 obj-$(CONFIG_SMP) += sched_cpupri.o
 obj-$(CONFIG_SLOW_WORK) += slow-work.o
 obj-$(CONFIG_PERF_COUNTERS) += perf_counter.o
+obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
 
 ifneq ($(CONFIG_SCHED_OMIT_FRAME_POINTER),y)
 # According to Alan Modra <[email protected]>, the -fno-omit-frame-pointer is
hw_breakpoint.c new file +369 -0

369 lines not on this page · raw message

#5 lore raw

Re: [Patch 02/12] Introducing generic hardware breakpoint handler interfaces

Quoted 339 lines · K.Prasad

This patch introduces the generic Hardware Breakpoint interfaces for both user and kernel space requests.

---
 arch/Kconfig           |    4 
 kernel/Makefile        |    1 
 kernel/hw_breakpoint.c |  369 +++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 374 insertions(+)

Index: arch/Kconfig
===================================================================

Kconfig renamed from Kconfig.orig +4 -0
@@ -112,3 +112,7 @@ config HAVE_DMA_API_DEBUG
 
 config HAVE_DEFAULT_NO_SPIN_MUTEXES
 	bool
+
+config HAVE_HW_BREAKPOINT
+	bool
+

Index: kernel/Makefile
===================================================================

Makefile renamed from Makefile.orig +1 -0
@@ -97,6 +97,7 @@ obj-$(CONFIG_X86_DS) += trace/
 obj-$(CONFIG_SMP) += sched_cpupri.o
 obj-$(CONFIG_SLOW_WORK) += slow-work.o
 obj-$(CONFIG_PERF_COUNTERS) += perf_counter.o
+obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
 
 ifneq ($(CONFIG_SCHED_OMIT_FRAME_POINTER),y)
 # According to Alan Modra <[email protected]>, the -fno-omit-frame-pointer is

Index: kernel/hw_breakpoint.c
===================================================================

hw_breakpoint.c new file +298 -0
@@ -0,0 +1,369 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2007 Alan Stern
+ * Copyright (C) IBM Corporation, 2009
+ */
+
+/*
+ * HW_breakpoint: a unified kernel/user-space hardware breakpoint facility,
+ * using the CPU's debug registers.
+ * This file contains the arch-independent routines.
+ */
+
+#include <linux/irqflags.h>
+#include <linux/kallsyms.h>
+#include <linux/notifier.h>
+#include <linux/kprobes.h>
+#include <linux/kdebug.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/percpu.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+
+#include <asm/hw_breakpoint.h>
+#include <asm/processor.h>
+
+#ifdef CONFIG_X86
+#include <asm/debugreg.h>
+#endif
+/*
+ * Spinlock that protects all (un)register operations over kernel/user-space
+ * breakpoint requests
+ */
+static DEFINE_SPINLOCK(hw_breakpoint_lock);
+
+/* Array of kernel-space breakpoint structures */
+struct hw_breakpoint *hbp_kernel[HBP_NUM];
+
+/*
+ * Per-processor copy of hbp_kernel[]. Used only when hbp_kernel is being
+ * modified but we need the older copy to handle any hbp exceptions. It will
+ * sync with hbp_kernel[] value after updation is done through IPIs.
+ */
+DEFINE_PER_CPU(struct hw_breakpoint*, this_hbp_kernel[HBP_NUM]);
+
+/*
+ * Kernel breakpoints grow downwards, starting from HBP_NUM
+ * 'hbp_kernel_pos' denotes lowest numbered breakpoint register occupied for
+ * kernel-space request. We will initialise it here and not in an __init
+ * routine because load_debug_registers(), which uses this variable can be
+ * called very early during CPU initialisation.
+ */
+unsigned int hbp_kernel_pos = HBP_NUM;
+
+/*
+ * An array containing refcount of threads using a given bkpt register
+ * Accesses are synchronised by acquiring hw_breakpoint_lock
+ */
+unsigned int hbp_user_refcount[HBP_NUM];
+
+/*
+ * Load the debug registers during startup of a CPU.
+ */
+void load_debug_registers(void)
+{
+	unsigned long flags;
+	struct task_struct *tsk = current;
+
+	spin_lock_bh(&hw_breakpoint_lock);
+
+	/* Prevent IPIs for new kernel breakpoint updates */
+	local_irq_save(flags);
+	arch_update_kernel_hw_breakpoint(NULL);
+	local_irq_restore(flags);
+
+	if (test_tsk_thread_flag(tsk, TIF_DEBUG))
+		arch_install_thread_hw_breakpoint(tsk);
+
+	spin_unlock_bh(&hw_breakpoint_lock);
+}
+
+/*
+ * Erase all the hardware breakpoint info associated with a thread.
+ *
+ * If tsk != current then tsk must not be usable (for example, a
+ * child being cleaned up from a failed fork).
+ */
+void flush_thread_hw_breakpoint(struct task_struct *tsk)
+{
+	int i;
+	struct thread_struct *thread = &(tsk->thread);
+
+	spin_lock_bh(&hw_breakpoint_lock);
+
+	/* The thread no longer has any breakpoints associated with it */
+	clear_tsk_thread_flag(tsk, TIF_DEBUG);
+	for (i = 0; i < HBP_NUM; i++) {
+		if (thread->hbp[i]) {
+			hbp_user_refcount[i]--;
+			kfree(thread->hbp[i]);
+			thread->hbp[i] = NULL;
+		}
+	}
+
+	arch_flush_thread_hw_breakpoint(tsk);
+
+	/* Actually uninstall the breakpoints if necessary */
+	if (tsk == current)
+		arch_uninstall_thread_hw_breakpoint();
+	spin_unlock_bh(&hw_breakpoint_lock);
+}
+
+/*
+ * Copy the hardware breakpoint info from a thread to its cloned child.
+ */
+int copy_thread_hw_breakpoint(struct task_struct *tsk,
+		struct task_struct *child, unsigned long clone_flags)
+{
+	/*
+	 * We will assume that breakpoint settings are not inherited
+	 * and the child starts out with no debug registers set.
+	 * But what about CLONE_PTRACE?
+	 */
+	clear_tsk_thread_flag(child, TIF_DEBUG);
+
+	/* We will call flush routine since the debugregs are not inherited */
+	arch_flush_thread_hw_breakpoint(child);
+
+	return 0;
+}
+
+static int __register_user_hw_breakpoint(int pos, struct task_struct *tsk,
+					struct hw_breakpoint *bp)
+{
+	struct thread_struct *thread = &(tsk->thread);
+	int rc;
+
+	/* Do not overcommit. Fail if kernel has used the hbp registers */
+	if (pos >= hbp_kernel_pos)
+		return -ENOSPC;
+
+	rc = arch_validate_hwbkpt_settings(bp, tsk);
+	if (rc)
+		return rc;
+
+	thread->hbp[pos] = bp;
+	hbp_user_refcount[pos]++;
+
+	arch_update_user_hw_breakpoint(pos, tsk);
+	/*
+	 * Does it need to be installed right now?
+	 * Otherwise it will get installed the next time tsk runs
+	 */
+	if (tsk == current)
+		arch_install_thread_hw_breakpoint(tsk);
+
+	return rc;
+}
+
+/*
+ * Modify the address of a hbp register already in use by the task
+ * Do not invoke this in-lieu of a __unregister_user_hw_breakpoint()
+ */
+static int __modify_user_hw_breakpoint(int pos, struct task_struct *tsk,
+					struct hw_breakpoint *bp)
+{
+	struct thread_struct *thread = &(tsk->thread);
+
+	if ((pos >= hbp_kernel_pos) || (arch_validate_hwbkpt_settings(bp, tsk)))
+		return -EINVAL;
+
+	if (thread->hbp[pos] == NULL)
+		return -EINVAL;
+
+	thread->hbp[pos] = bp;
+	/*
+	 * 'pos' must be that of a hbp register already used by 'tsk'
+	 * Otherwise arch_modify_user_hw_breakpoint() will fail
+	 */
+	arch_update_user_hw_breakpoint(pos, tsk);
+
+	if (tsk == current)
+		arch_install_thread_hw_breakpoint(tsk);
+
+	return 0;
+}
+
+static void __unregister_user_hw_breakpoint(int pos, struct task_struct *tsk)
+{
+	hbp_user_refcount[pos]--;
+	tsk->thread.hbp[pos] = NULL;
+
+	arch_update_user_hw_breakpoint(pos, tsk);
+
+	if (tsk == current)
+		arch_install_thread_hw_breakpoint(tsk);
+}
+
+/**
+ * register_user_hw_breakpoint - register a hardware breakpoint for user space
+ * @tsk: pointer to 'task_struct' of the process to which the address belongs
+ * @bp: the breakpoint structure to register
+ *
+ * @bp.info->name or @bp.info->address, @bp.info->len, @bp.info->type and
+ * @bp->triggered must be set properly before invocation
+ *
+ */
+int register_user_hw_breakpoint(struct task_struct *tsk,
+					struct hw_breakpoint *bp)
+{
+	struct thread_struct *thread = &(tsk->thread);
+	int i, rc = -ENOSPC;
+
+	spin_lock_bh(&hw_breakpoint_lock);
+
+	for (i = 0; i < hbp_kernel_pos; i++) {
+		if (!thread->hbp[i]) {
+			rc = __register_user_hw_breakpoint(i, tsk, bp);
+			break;
+		}
+	}
+
+	spin_unlock_bh(&hw_breakpoint_lock);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(register_user_hw_breakpoint);
+
+/**
+ * modify_user_hw_breakpoint - modify a user-space hardware breakpoint
+ * @tsk: pointer to 'task_struct' of the process to which the address belongs
+ * @bp: the breakpoint structure to unregister
+ *
+ */
+int modify_user_hw_breakpoint(struct task_struct *tsk, struct hw_breakpoint *bp)
+{
+	struct thread_struct *thread = &(tsk->thread);
+	int i, ret = -ENOENT;
+
+	spin_lock_bh(&hw_breakpoint_lock);
+	for (i = 0; i < hbp_kernel_pos; i++) {
+		if (bp == thread->hbp[i]) {
+			ret = __modify_user_hw_breakpoint(i, tsk, bp);
+			break;
+		}
+	}
+	spin_unlock_bh(&hw_breakpoint_lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(modify_user_hw_breakpoint);
+
+/**
+ * unregister_user_hw_breakpoint - unregister a user-space hardware breakpoint
+ * @tsk: pointer to 'task_struct' of the process to which the address belongs
+ * @bp: the breakpoint structure to unregister
+ *
+ */
+void unregister_user_hw_breakpoint(struct task_struct *tsk,
+						struct hw_breakpoint *bp)
+{
+	struct thread_struct *thread = &(tsk->thread);
+	int i;
+
+	spin_lock_bh(&hw_breakpoint_lock);
+	for (i = 0; i < hbp_kernel_pos; i++) {
+		if (bp == thread->hbp[i]) {
+			__unregister_user_hw_breakpoint(i, tsk);
+			break;
+		}
+	}
+	spin_unlock_bh(&hw_breakpoint_lock);
+}
+EXPORT_SYMBOL_GPL(unregister_user_hw_breakpoint);
+
+/**
+ * register_kernel_hw_breakpoint - register a hardware breakpoint for kernel space
+ * @bp: the breakpoint structure to register
+ *
+ * @bp.info->name or @bp.info->address, @bp.info->len, @bp.info->type and
+ * @bp->triggered must be set properly before invocation
+ *
+ */
+int register_kernel_hw_breakpoint(struct hw_breakpoint *bp)
+{
+	int rc;

hw_breakpoint.c line 308

Quoted 10 lines
hw_breakpoint.c new file +10 -0
+
+	rc = arch_validate_hwbkpt_settings(bp, NULL);
+	if (rc)
+		return rc;
+
+	spin_lock_bh(&hw_breakpoint_lock);
+
+	rc = -EINVAL;
+	/* Check if we are over-committing */
+	if ((hbp_kernel_pos > 0) && (!hbp_user_refcount[hbp_kernel_pos-1])) {

If hbp_kernel_pos == 0, shouldn't it return -ENOSPC ?
If several kernel users try to register a breakpoint, and there is no more room for one of them, then we know it has failed not because of an error in the breakpoint instance but because of a lack of resources.

Frederic.

Quoted 62 lines
hw_breakpoint.c new file +61 -0
+		hbp_kernel_pos--;
+		hbp_kernel[hbp_kernel_pos] = bp;
+		on_each_cpu(arch_update_kernel_hw_breakpoint, NULL, 1);
+		rc = 0;
+	}
+
+	spin_unlock_bh(&hw_breakpoint_lock);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(register_kernel_hw_breakpoint);
+
+/**
+ * unregister_kernel_hw_breakpoint - unregister a HW breakpoint for kernel space
+ * @bp: the breakpoint structure to unregister
+ *
+ * Uninstalls and unregisters @bp.
+ */
+void unregister_kernel_hw_breakpoint(struct hw_breakpoint *bp)
+{
+	int i, j;
+
+	spin_lock_bh(&hw_breakpoint_lock);
+
+	/* Find the 'bp' in our list of breakpoints for kernel */
+	for (i = hbp_kernel_pos; i < HBP_NUM; i++)
+		if (bp == hbp_kernel[i])
+			break;
+
+	/* Check if we did not find a match for 'bp'. If so return early */
+	if (i == HBP_NUM) {
+		spin_unlock_bh(&hw_breakpoint_lock);
+		return;
+	}
+
+	/*
+	 * We'll shift the breakpoints one-level above to compact if
+	 * unregistration creates a hole
+	 */
+	for (j = i; j > hbp_kernel_pos; j--)
+		hbp_kernel[j] = hbp_kernel[j-1];
+
+	hbp_kernel[hbp_kernel_pos] = NULL;
+	on_each_cpu(arch_update_kernel_hw_breakpoint, NULL, 1);
+	hbp_kernel_pos++;
+
+	spin_unlock_bh(&hw_breakpoint_lock);
+}
+EXPORT_SYMBOL_GPL(unregister_kernel_hw_breakpoint);
+
+static struct notifier_block hw_breakpoint_exceptions_nb = {
+	.notifier_call = hw_breakpoint_exceptions_notify,
+	/* we need to be notified first */
+	.priority = 0x7fffffff
+};
+
+static int __init init_hw_breakpoint(void)
+{
+	return register_die_notifier(&hw_breakpoint_exceptions_nb);
+}
+
+core_initcall(init_hw_breakpoint);
author
#6 lore raw

Re: [Patch 02/12] Introducing generic hardware breakpoint handler interfaces

Quoted 43 lines · Frederic Weisbecker
Quoted 23 lines · K.Prasad

This patch introduces the generic Hardware Breakpoint interfaces for both user and kernel space requests.

---
 arch/Kconfig           |    4 
 kernel/Makefile        |    1 
 kernel/hw_breakpoint.c |  369 +++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 374 insertions(+)
(quoted diff) +11 -0
+/**
+ * register_kernel_hw_breakpoint - register a hardware breakpoint for kernel space
+ * @bp: the breakpoint structure to register
+ *
+ * @bp.info->name or @bp.info->address, @bp.info->len, @bp.info->type and
+ * @bp->triggered must be set properly before invocation
+ *
+ */
+int register_kernel_hw_breakpoint(struct hw_breakpoint *bp)
+{
+	int rc;

Review

Quoted 10 lines
(quoted diff) +10 -0
+
+	rc = arch_validate_hwbkpt_settings(bp, NULL);
+	if (rc)
+		return rc;
+
+	spin_lock_bh(&hw_breakpoint_lock);
+
+	rc = -EINVAL;
+	/* Check if we are over-committing */
+	if ((hbp_kernel_pos > 0) && (!hbp_user_refcount[hbp_kernel_pos-1])) {

If hbp_kernel_pos == 0, shouldn't it return -ENOSPC ?
If several kernel users try to register a breakpoint, and there is no more room for one of them, then we know it has failed not because of an error in the breakpoint instance but because of a lack of resources.

Quoted 2 lines

Frederic.

Agreed. It's done correctly in the case of register_user_hw_breakpoint() but not here. Here's a tiny patch that corrects it.

Modify the return code in register_kernel_hw_breakpoint()

Modify the return code in register_kernel_hw_breakpoint() to return -ENOSPC if we are error-returning due to lack of free HW breakpoint registers.

---
 kernel/hw_breakpoint.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
kernel/hw_breakpoint.c +1 -1
Index: linux-2.6-tip.hbkpt/kernel/hw_breakpoint.c
===================================================================
@@ -312,7 +312,7 @@ int register_kernel_hw_breakpoint(struct
 
 	spin_lock_bh(&hw_breakpoint_lock);
 
-	rc = -EINVAL;
+	rc = -ENOSPC;
 	/* Check if we are over-committing */
 	if ((hbp_kernel_pos > 0) && (!hbp_user_refcount[hbp_kernel_pos-1])) {
 		hbp_kernel_pos--;
#7 lore raw

Re: [Patch 02/12] Introducing generic hardware breakpoint handler interfaces

Quoted 44 lines · K.Prasad
Quoted 43 lines · Frederic Weisbecker
Quoted 23 lines · K.Prasad

This patch introduces the generic Hardware Breakpoint interfaces for both user and kernel space requests.

---
 arch/Kconfig           |    4 
 kernel/Makefile        |    1 
 kernel/hw_breakpoint.c |  369 +++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 374 insertions(+)
(quoted diff) +11 -0
+/**
+ * register_kernel_hw_breakpoint - register a hardware breakpoint for kernel space
+ * @bp: the breakpoint structure to register
+ *
+ * @bp.info->name or @bp.info->address, @bp.info->len, @bp.info->type and
+ * @bp->triggered must be set properly before invocation
+ *
+ */
+int register_kernel_hw_breakpoint(struct hw_breakpoint *bp)
+{
+	int rc;

Review

Quoted 10 lines
(quoted diff) +10 -0
+
+	rc = arch_validate_hwbkpt_settings(bp, NULL);
+	if (rc)
+		return rc;
+
+	spin_lock_bh(&hw_breakpoint_lock);
+
+	rc = -EINVAL;
+	/* Check if we are over-committing */
+	if ((hbp_kernel_pos > 0) && (!hbp_user_refcount[hbp_kernel_pos-1])) {

If hbp_kernel_pos == 0, shouldn't it return -ENOSPC ?
If several kernel users try to register a breakpoint, and there is no more room for one of them, then we know it has failed not because of an error in the breakpoint instance but because of a lack of resources.

Quoted 5 lines
Quoted 2 lines

Frederic.

Agreed. It's done correctly in the case of register_user_hw_breakpoint() but not here. Here's a tiny patch that corrects it.

Thanks. I will apply this one too.

Frederic.

Quoted 25 lines

Modify the return code in register_kernel_hw_breakpoint()

Modify the return code in register_kernel_hw_breakpoint() to return -ENOSPC if we are error-returning due to lack of free HW breakpoint registers.

---
 kernel/hw_breakpoint.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Index: linux-2.6-tip.hbkpt/kernel/hw_breakpoint.c
===================================================================

kernel/hw_breakpoint.c +1 -1
@@ -312,7 +312,7 @@ int register_kernel_hw_breakpoint(struct
 
 	spin_lock_bh(&hw_breakpoint_lock);
 
-	rc = -EINVAL;
+	rc = -ENOSPC;
 	/* Check if we are over-committing */
 	if ((hbp_kernel_pos > 0) && (!hbp_user_refcount[hbp_kernel_pos-1])) {
 		hbp_kernel_pos--;
author
#8 lore raw

PATCH 3/12 x86 architecture implementation of Hardware Breakpoint interfaces

In reply to a message not in the archive

This patch introduces the arch-specific implementation of hw_breakpoint.c inside x86 specific directories. They contain functions which help validate and serve requests for using Hardware Breakpoint registers on x86 processors.

---
 arch/x86/Kconfig                |    1 
 arch/x86/kernel/Makefile        |    2 
 arch/x86/kernel/hw_breakpoint.c |  368 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 370 insertions(+), 1 deletion(-)
x86/Kconfig renamed from x86/Kconfig.orig +1 -0
Index: arch/x86/Kconfig
===================================================================
@@ -47,6 +47,7 @@ config X86
 	select HAVE_KERNEL_BZIP2
 	select HAVE_KERNEL_LZMA
 	select HAVE_ARCH_KMEMCHECK
+	select HAVE_HW_BREAKPOINT
 
 config OUTPUT_FORMAT
 	string
x86/kernel/Makefile renamed from x86/kernel/Makefile.orig +1 -1
Index: arch/x86/kernel/Makefile
===================================================================
@@ -36,7 +36,7 @@ obj-$(CONFIG_X86_64)	+= sys_x86_64.o x86
 obj-$(CONFIG_X86_64)	+= syscall_64.o vsyscall_64.o
 obj-y			+= bootflag.o e820.o
 obj-y			+= pci-dma.o quirks.o i8237.o topology.o kdebugfs.o
-obj-y			+= alternative.o i8253.o pci-nommu.o
+obj-y			+= alternative.o i8253.o pci-nommu.o hw_breakpoint.o
 obj-y			+= tsc.o io_delay.o rtc.o
 
 obj-$(CONFIG_X86_TRAMPOLINE)	+= trampoline.o
x86/kernel/hw_breakpoint.c new file +368 -0

368 lines not on this page · raw message

author
#9 lore raw

PATCH 3/12 x86 architecture implementation of Hardware Breakpoint interfaces

In reply to a message not in the archive

This patch introduces the arch-specific implementation of hw_breakpoint.c inside x86 specific directories. They contain functions which help validate and serve requests for using Hardware Breakpoint registers on x86 processors.

---
 arch/x86/Kconfig                |    1 
 arch/x86/kernel/Makefile        |    2 
 arch/x86/kernel/hw_breakpoint.c |  368 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 370 insertions(+), 1 deletion(-)
x86/Kconfig renamed from x86/Kconfig.orig +1 -0
Index: arch/x86/Kconfig
===================================================================
@@ -47,6 +47,7 @@ config X86
 	select HAVE_KERNEL_BZIP2
 	select HAVE_KERNEL_LZMA
 	select HAVE_ARCH_KMEMCHECK
+	select HAVE_HW_BREAKPOINT
 
 config OUTPUT_FORMAT
 	string
x86/kernel/Makefile renamed from x86/kernel/Makefile.orig +1 -1
Index: arch/x86/kernel/Makefile
===================================================================
@@ -36,7 +36,7 @@ obj-$(CONFIG_X86_64)	+= sys_x86_64.o x86
 obj-$(CONFIG_X86_64)	+= syscall_64.o vsyscall_64.o
 obj-y			+= bootflag.o e820.o
 obj-y			+= pci-dma.o quirks.o i8237.o topology.o kdebugfs.o
-obj-y			+= alternative.o i8253.o pci-nommu.o
+obj-y			+= alternative.o i8253.o pci-nommu.o hw_breakpoint.o
 obj-y			+= tsc.o io_delay.o rtc.o
 
 obj-$(CONFIG_X86_TRAMPOLINE)	+= trampoline.o
x86/kernel/hw_breakpoint.c new file +368 -0

368 lines not on this page · raw message

author
#10 lore raw

PATCH 4/12 Modifying generic debug exception to use thread-specific debug registers

In reply to a message not in the archive

From: Alan Stern <[email protected]>

This patch modifies the breakpoint exception handler code to use the abstract register names.

[K.Prasad: Split-out from the bigger patch and minor changes following
re-basing]

---
 arch/x86/kernel/traps.c |   76 +++++++++++++++++-------------------------------
 1 file changed, 27 insertions(+), 49 deletions(-)
x86/kernel/traps.c renamed from x86/kernel/traps.c.orig +27 -49
Index: arch/x86/kernel/traps.c
===================================================================
@@ -530,76 +530,54 @@ asmlinkage __kprobes struct pt_regs *syn
 dotraplinkage void __kprobes do_debug(struct pt_regs *regs, long error_code)
 {
 	struct task_struct *tsk = current;
-	unsigned long condition;
+	unsigned long dr6;
 	int si_code;
 
-	get_debugreg(condition, 6);
+	get_debugreg(dr6, 6);
 
 	/* Catch kmemcheck conditions first of all! */
-	if (condition & DR_STEP && kmemcheck_trap(regs))
+	if (((dr6 & DR_STEP) && kmemcheck_trap(regs)) &&
+		!(dr6 & DR_TRAP_BITS))
 		return;
-
+	/* DR6 may or may not be cleared by the CPU */
+	set_debugreg(0, 6);
 	/*
 	 * The processor cleared BTF, so don't mark that we need it set.
 	 */
 	clear_tsk_thread_flag(tsk, TIF_DEBUGCTLMSR);
 	tsk->thread.debugctlmsr = 0;
 
-	if (notify_die(DIE_DEBUG, "debug", regs, condition, error_code,
+	/* Store the virtualized DR6 value */
+	tsk->thread.debugreg6 = dr6;
+
+	if (notify_die(DIE_DEBUG, "debug", regs, dr6, error_code,
 						SIGTRAP) == NOTIFY_STOP)
 		return;
 
 	/* It's safe to allow irq's after DR6 has been saved */
 	preempt_conditional_sti(regs);
 
-	/* Mask out spurious debug traps due to lazy DR7 setting */
-	if (condition & (DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3)) {
-		if (!tsk->thread.debugreg7)
-			goto clear_dr7;
-	}
-
-#ifdef CONFIG_X86_32
-	if (regs->flags & X86_VM_MASK)
-		goto debug_vm86;
-#endif
-
-	/* Save debug status register where ptrace can see it */
-	tsk->thread.debugreg6 = condition;
-
-	/*
-	 * Single-stepping through TF: make sure we ignore any events in
-	 * kernel space (but re-enable TF when returning to user mode).
-	 */
-	if (condition & DR_STEP) {
-		if (!user_mode(regs))
-			goto clear_TF_reenable;
+	if (regs->flags & X86_VM_MASK) {
+		handle_vm86_trap((struct kernel_vm86_regs *) regs,
+				error_code, 1);
+		return;
 	}
 
-	si_code = get_si_code(condition);
-	/* Ok, finally something we can handle */
-	send_sigtrap(tsk, regs, error_code, si_code);
-
 	/*
-	 * Disable additional traps. They'll be re-enabled when
-	 * the signal is delivered.
+	 * Single-stepping through system calls: ignore any exceptions in
+	 * kernel space, but re-enable TF when returning to user mode.
+	 *
+	 * We already checked v86 mode above, so we can check for kernel mode
+	 * by just checking the CPL of CS.
 	 */
-clear_dr7:
-	set_debugreg(0, 7);
-	preempt_conditional_cli(regs);
-	return;
-
-#ifdef CONFIG_X86_32
-debug_vm86:
-	/* reenable preemption: handle_vm86_trap() might sleep */
-	dec_preempt_count();
-	handle_vm86_trap((struct kernel_vm86_regs *) regs, error_code, 1);
-	conditional_cli(regs);
-	return;
-#endif
-
-clear_TF_reenable:
-	set_tsk_thread_flag(tsk, TIF_SINGLESTEP);
-	regs->flags &= ~X86_EFLAGS_TF;
+	if ((dr6 & DR_STEP) && !user_mode(regs)) {
+		tsk->thread.debugreg6 &= ~DR_STEP;
+		set_tsk_thread_flag(tsk, TIF_SINGLESTEP);
+		regs->flags &= ~X86_EFLAGS_TF;
+	}
+	si_code = get_si_code(tsk->thread.debugreg6);
+	if (tsk->thread.debugreg6 & (DR_STEP | DR_TRAP_BITS))
+		send_sigtrap(tsk, regs, error_code, si_code);
 	preempt_conditional_cli(regs);
 	return;
 }
author
#11 lore raw

PATCH 4/12 Modifying generic debug exception to use thread-specific debug registers

In reply to a message not in the archive

This patch modifies the breakpoint exception handler code to use the abstract register names.

---
 arch/x86/kernel/traps.c |   76 +++++++++++++++++-------------------------------
 1 file changed, 27 insertions(+), 49 deletions(-)
x86/kernel/traps.c renamed from x86/kernel/traps.c.orig +27 -49
Index: arch/x86/kernel/traps.c
===================================================================
@@ -530,76 +530,54 @@ asmlinkage __kprobes struct pt_regs *syn
 dotraplinkage void __kprobes do_debug(struct pt_regs *regs, long error_code)
 {
 	struct task_struct *tsk = current;
-	unsigned long condition;
+	unsigned long dr6;
 	int si_code;
 
-	get_debugreg(condition, 6);
+	get_debugreg(dr6, 6);
 
 	/* Catch kmemcheck conditions first of all! */
-	if (condition & DR_STEP && kmemcheck_trap(regs))
+	if (((dr6 & DR_STEP) && kmemcheck_trap(regs)) &&
+		!(dr6 & DR_TRAP_BITS))
 		return;
-
+	/* DR6 may or may not be cleared by the CPU */
+	set_debugreg(0, 6);
 	/*
 	 * The processor cleared BTF, so don't mark that we need it set.
 	 */
 	clear_tsk_thread_flag(tsk, TIF_DEBUGCTLMSR);
 	tsk->thread.debugctlmsr = 0;
 
-	if (notify_die(DIE_DEBUG, "debug", regs, condition, error_code,
+	/* Store the virtualized DR6 value */
+	tsk->thread.debugreg6 = dr6;
+
+	if (notify_die(DIE_DEBUG, "debug", regs, dr6, error_code,
 						SIGTRAP) == NOTIFY_STOP)
 		return;
 
 	/* It's safe to allow irq's after DR6 has been saved */
 	preempt_conditional_sti(regs);
 
-	/* Mask out spurious debug traps due to lazy DR7 setting */
-	if (condition & (DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3)) {
-		if (!tsk->thread.debugreg7)
-			goto clear_dr7;
-	}
-
-#ifdef CONFIG_X86_32
-	if (regs->flags & X86_VM_MASK)
-		goto debug_vm86;
-#endif
-
-	/* Save debug status register where ptrace can see it */
-	tsk->thread.debugreg6 = condition;
-
-	/*
-	 * Single-stepping through TF: make sure we ignore any events in
-	 * kernel space (but re-enable TF when returning to user mode).
-	 */
-	if (condition & DR_STEP) {
-		if (!user_mode(regs))
-			goto clear_TF_reenable;
+	if (regs->flags & X86_VM_MASK) {
+		handle_vm86_trap((struct kernel_vm86_regs *) regs,
+				error_code, 1);
+		return;
 	}
 
-	si_code = get_si_code(condition);
-	/* Ok, finally something we can handle */
-	send_sigtrap(tsk, regs, error_code, si_code);
-
 	/*
-	 * Disable additional traps. They'll be re-enabled when
-	 * the signal is delivered.
+	 * Single-stepping through system calls: ignore any exceptions in
+	 * kernel space, but re-enable TF when returning to user mode.
+	 *
+	 * We already checked v86 mode above, so we can check for kernel mode
+	 * by just checking the CPL of CS.
 	 */
-clear_dr7:
-	set_debugreg(0, 7);
-	preempt_conditional_cli(regs);
-	return;
-
-#ifdef CONFIG_X86_32
-debug_vm86:
-	/* reenable preemption: handle_vm86_trap() might sleep */
-	dec_preempt_count();
-	handle_vm86_trap((struct kernel_vm86_regs *) regs, error_code, 1);
-	conditional_cli(regs);
-	return;
-#endif
-
-clear_TF_reenable:
-	set_tsk_thread_flag(tsk, TIF_SINGLESTEP);
-	regs->flags &= ~X86_EFLAGS_TF;
+	if ((dr6 & DR_STEP) && !user_mode(regs)) {
+		tsk->thread.debugreg6 &= ~DR_STEP;
+		set_tsk_thread_flag(tsk, TIF_SINGLESTEP);
+		regs->flags &= ~X86_EFLAGS_TF;
+	}
+	si_code = get_si_code(tsk->thread.debugreg6);
+	if (tsk->thread.debugreg6 & (DR_STEP | DR_TRAP_BITS))
+		send_sigtrap(tsk, regs, error_code, si_code);
 	preempt_conditional_cli(regs);
 	return;
 }
author
#12 lore raw

PATCH 5/12 Use wrapper routines around debug registers in processor related functions

In reply to a message not in the archive

From: Alan Stern <[email protected]>

This patch enables the use of wrapper routines to access the debug/breakpoint registers.

[K.Prasad: Split-out from the bigger patch and minor changes following
re-basing]

---
 arch/x86/kernel/smpboot.c |    3 +++
 arch/x86/power/cpu_32.c   |   16 +++-------------
 arch/x86/power/cpu_64.c   |   15 +++------------
 3 files changed, 9 insertions(+), 25 deletions(-)
x86/kernel/smpboot.c renamed from x86/kernel/smpboot.c.orig +3 -0
Index: arch/x86/kernel/smpboot.c
===================================================================
@@ -63,6 +63,7 @@
 #include <asm/apic.h>
 #include <asm/setup.h>
 #include <asm/uv/uv.h>
+#include <asm/debugreg.h>
 #include <linux/mc146818rtc.h>
 
 #include <asm/smpboot_hooks.h>
@@ -326,6 +327,7 @@ notrace static void __cpuinit start_seco
 	setup_secondary_clock();
 
 	wmb();
+	load_debug_registers();
 	cpu_idle();
 }
 
@@ -1252,6 +1254,7 @@ void cpu_disable_common(void)
 	remove_cpu_from_maps(cpu);
 	unlock_vector_lock();
 	fixup_irqs();
+	hw_breakpoint_disable();
 }
 
 int native_cpu_disable(void)
x86/power/cpu_32.c renamed from x86/power/cpu_32.c.orig +3 -13
Index: arch/x86/power/cpu_32.c
===================================================================
@@ -13,6 +13,7 @@
 #include <asm/mce.h>
 #include <asm/xcr.h>
 #include <asm/suspend.h>
+#include <asm/debugreg.h>
 
 static struct saved_context saved_context;
 
@@ -48,6 +49,7 @@ static void __save_processor_state(struc
 	ctxt->cr2 = read_cr2();
 	ctxt->cr3 = read_cr3();
 	ctxt->cr4 = read_cr4_safe();
+	hw_breakpoint_disable();
 }
 
 /* Needed by apm.c */
@@ -80,19 +82,7 @@ static void fix_processor_context(void)
 	load_TR_desc();				/* This does ltr */
 	load_LDT(&current->active_mm->context);	/* This does lldt */
 
-	/*
-	 * Now maybe reload the debug registers
-	 */
-	if (current->thread.debugreg7) {
-		set_debugreg(current->thread.debugreg0, 0);
-		set_debugreg(current->thread.debugreg1, 1);
-		set_debugreg(current->thread.debugreg2, 2);
-		set_debugreg(current->thread.debugreg3, 3);
-		/* no 4 and 5 */
-		set_debugreg(current->thread.debugreg6, 6);
-		set_debugreg(current->thread.debugreg7, 7);
-	}
-
+	load_debug_registers();
 }
 
 static void __restore_processor_state(struct saved_context *ctxt)
x86/power/cpu_64.c renamed from x86/power/cpu_64.c.orig +3 -12
Index: arch/x86/power/cpu_64.c
===================================================================
@@ -16,6 +16,7 @@
 #include <asm/mtrr.h>
 #include <asm/xcr.h>
 #include <asm/suspend.h>
+#include <asm/debugreg.h>
 
 static void fix_processor_context(void);
 
@@ -71,6 +72,7 @@ static void __save_processor_state(struc
 	ctxt->cr3 = read_cr3();
 	ctxt->cr4 = read_cr4();
 	ctxt->cr8 = read_cr8();
+	hw_breakpoint_disable();
 }
 
 void save_processor_state(void)
@@ -159,16 +161,5 @@ static void fix_processor_context(void)
 	load_TR_desc();				/* This does ltr */
 	load_LDT(&current->active_mm->context);	/* This does lldt */
 
-	/*
-	 * Now maybe reload the debug registers
-	 */
-	if (current->thread.debugreg7){
-                loaddebug(&current->thread, 0);
-                loaddebug(&current->thread, 1);
-                loaddebug(&current->thread, 2);
-                loaddebug(&current->thread, 3);
-                /* no 4 and 5 */
-                loaddebug(&current->thread, 6);
-                loaddebug(&current->thread, 7);
-	}
+	load_debug_registers();
 }
author
#13 lore raw

PATCH 5/12 Use wrapper routines around debug registers in processor related functions

In reply to a message not in the archive

This patch enables the use of wrapper routines to access the debug/breakpoint registers.

---
 arch/x86/kernel/smpboot.c |    3 +++
 arch/x86/power/cpu_32.c   |   16 +++-------------
 arch/x86/power/cpu_64.c   |   15 +++------------
 3 files changed, 9 insertions(+), 25 deletions(-)
x86/kernel/smpboot.c renamed from x86/kernel/smpboot.c.orig +3 -0
Index: arch/x86/kernel/smpboot.c
===================================================================
@@ -63,6 +63,7 @@
 #include <asm/apic.h>
 #include <asm/setup.h>
 #include <asm/uv/uv.h>
+#include <asm/debugreg.h>
 #include <linux/mc146818rtc.h>
 
 #include <asm/smpboot_hooks.h>
@@ -326,6 +327,7 @@ notrace static void __cpuinit start_seco
 	setup_secondary_clock();
 
 	wmb();
+	load_debug_registers();
 	cpu_idle();
 }
 
@@ -1252,6 +1254,7 @@ void cpu_disable_common(void)
 	remove_cpu_from_maps(cpu);
 	unlock_vector_lock();
 	fixup_irqs();
+	hw_breakpoint_disable();
 }
 
 int native_cpu_disable(void)
x86/power/cpu_32.c renamed from x86/power/cpu_32.c.orig +3 -13
Index: arch/x86/power/cpu_32.c
===================================================================
@@ -13,6 +13,7 @@
 #include <asm/mce.h>
 #include <asm/xcr.h>
 #include <asm/suspend.h>
+#include <asm/debugreg.h>
 
 static struct saved_context saved_context;
 
@@ -48,6 +49,7 @@ static void __save_processor_state(struc
 	ctxt->cr2 = read_cr2();
 	ctxt->cr3 = read_cr3();
 	ctxt->cr4 = read_cr4_safe();
+	hw_breakpoint_disable();
 }
 
 /* Needed by apm.c */
@@ -80,19 +82,7 @@ static void fix_processor_context(void)
 	load_TR_desc();				/* This does ltr */
 	load_LDT(&current->active_mm->context);	/* This does lldt */
 
-	/*
-	 * Now maybe reload the debug registers
-	 */
-	if (current->thread.debugreg7) {
-		set_debugreg(current->thread.debugreg0, 0);
-		set_debugreg(current->thread.debugreg1, 1);
-		set_debugreg(current->thread.debugreg2, 2);
-		set_debugreg(current->thread.debugreg3, 3);
-		/* no 4 and 5 */
-		set_debugreg(current->thread.debugreg6, 6);
-		set_debugreg(current->thread.debugreg7, 7);
-	}
-
+	load_debug_registers();
 }
 
 static void __restore_processor_state(struct saved_context *ctxt)
x86/power/cpu_64.c renamed from x86/power/cpu_64.c.orig +3 -12
Index: arch/x86/power/cpu_64.c
===================================================================
@@ -16,6 +16,7 @@
 #include <asm/mtrr.h>
 #include <asm/xcr.h>
 #include <asm/suspend.h>
+#include <asm/debugreg.h>
 
 static void fix_processor_context(void);
 
@@ -71,6 +72,7 @@ static void __save_processor_state(struc
 	ctxt->cr3 = read_cr3();
 	ctxt->cr4 = read_cr4();
 	ctxt->cr8 = read_cr8();
+	hw_breakpoint_disable();
 }
 
 void save_processor_state(void)
@@ -159,16 +161,5 @@ static void fix_processor_context(void)
 	load_TR_desc();				/* This does ltr */
 	load_LDT(&current->active_mm->context);	/* This does lldt */
 
-	/*
-	 * Now maybe reload the debug registers
-	 */
-	if (current->thread.debugreg7){
-                loaddebug(&current->thread, 0);
-                loaddebug(&current->thread, 1);
-                loaddebug(&current->thread, 2);
-                loaddebug(&current->thread, 3);
-                /* no 4 and 5 */
-                loaddebug(&current->thread, 6);
-                loaddebug(&current->thread, 7);
-	}
+	load_debug_registers();
 }
author
#14 lore raw

PATCH 6/12 Use the new wrapper routines to access debug registers in process/thread code

In reply to a message not in the archive

From: Alan Stern <[email protected]>

This patch enables the use of abstract debug registers in process-handling routines.

[K.Prasad: Split-out from the bigger patch and minor changes following
re-basing]

---
 arch/x86/kernel/process.c    |   23 ++++++-----------------
 arch/x86/kernel/process_32.c |   31 +++++++++++++++++++++++++++++++
 arch/x86/kernel/process_64.c |   33 +++++++++++++++++++++++++++++++++
 3 files changed, 70 insertions(+), 17 deletions(-)
x86/kernel/process.c renamed from x86/kernel/process.c.orig +6 -17
Index: arch/x86/kernel/process.c
===================================================================
@@ -16,6 +16,8 @@
 #include <asm/uaccess.h>
 #include <asm/i387.h>
 #include <asm/ds.h>
+#include <asm/debugreg.h>
+#include <asm/hw_breakpoint.h>
 
 unsigned long idle_halt;
 EXPORT_SYMBOL(idle_halt);
@@ -47,6 +49,8 @@ void free_thread_xstate(struct task_stru
 		kmem_cache_free(task_xstate_cachep, tsk->thread.xstate);
 		tsk->thread.xstate = NULL;
 	}
+	if (unlikely(test_tsk_thread_flag(tsk, TIF_DEBUG)))
+		flush_thread_hw_breakpoint(tsk);
 
 	WARN(tsk->thread.ds_ctx, "leaking DS context\n");
 }
@@ -105,14 +109,9 @@ void flush_thread(void)
 	}
 #endif
 
-	clear_tsk_thread_flag(tsk, TIF_DEBUG);
+	if (unlikely(test_tsk_thread_flag(tsk, TIF_DEBUG)))
+		flush_thread_hw_breakpoint(tsk);
 
-	tsk->thread.debugreg0 = 0;
-	tsk->thread.debugreg1 = 0;
-	tsk->thread.debugreg2 = 0;
-	tsk->thread.debugreg3 = 0;
-	tsk->thread.debugreg6 = 0;
-	tsk->thread.debugreg7 = 0;
 	memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array));
 	/*
 	 * Forget coprocessor state..
@@ -194,16 +193,6 @@ void __switch_to_xtra(struct task_struct
 	else if (next->debugctlmsr != prev->debugctlmsr)
 		update_debugctlmsr(next->debugctlmsr);
 
-	if (test_tsk_thread_flag(next_p, TIF_DEBUG)) {
-		set_debugreg(next->debugreg0, 0);
-		set_debugreg(next->debugreg1, 1);
-		set_debugreg(next->debugreg2, 2);
-		set_debugreg(next->debugreg3, 3);
-		/* no 4 and 5 */
-		set_debugreg(next->debugreg6, 6);
-		set_debugreg(next->debugreg7, 7);
-	}
-
 	if (test_tsk_thread_flag(prev_p, TIF_NOTSC) ^
 	    test_tsk_thread_flag(next_p, TIF_NOTSC)) {
 		/* prev and next are different */
x86/kernel/process_32.c renamed from x86/kernel/process_32.c.orig +31 -0
Index: arch/x86/kernel/process_32.c
===================================================================
@@ -61,6 +61,8 @@
 #include <asm/idle.h>
 #include <asm/syscalls.h>
 #include <asm/ds.h>
+#include <asm/debugreg.h>
+#include <asm/hw_breakpoint.h>
 
 asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
 
@@ -265,7 +267,14 @@ int copy_thread(unsigned long clone_flag
 
 	task_user_gs(p) = get_user_gs(regs);
 
+	p->thread.io_bitmap_ptr = NULL;
+
 	tsk = current;
+	err = -ENOMEM;
+	if (unlikely(test_tsk_thread_flag(tsk, TIF_DEBUG)))
+		if (copy_thread_hw_breakpoint(tsk, p, clone_flags))
+			goto out;
+
 	if (unlikely(test_tsk_thread_flag(tsk, TIF_IO_BITMAP))) {
 		p->thread.io_bitmap_ptr = kmemdup(tsk->thread.io_bitmap_ptr,
 						IO_BITMAP_BYTES, GFP_KERNEL);
@@ -285,10 +294,13 @@ int copy_thread(unsigned long clone_flag
 		err = do_set_thread_area(p, -1,
 			(struct user_desc __user *)childregs->si, 0);
 
+out:
 	if (err && p->thread.io_bitmap_ptr) {
 		kfree(p->thread.io_bitmap_ptr);
 		p->thread.io_bitmap_max = 0;
 	}
+	if (err)
+		flush_thread_hw_breakpoint(p);
 
 	clear_tsk_thread_flag(p, TIF_DS_AREA_MSR);
 	p->thread.ds_ctx = NULL;
@@ -427,6 +439,25 @@ __switch_to(struct task_struct *prev_p, 
 		lazy_load_gs(next->gs);
 
 	percpu_write(current_task, next_p);
+	/*
+	 * There's a problem with moving the arch_install_thread_hw_breakpoint()
+	 * call before current is updated.  Suppose a kernel breakpoint is
+	 * triggered in between the two.  The hw-breakpoint handler will see
+	 * that current is different from the task pointer stored in
+	 * last_debugged_task, so it will think the task pointer is leftover
+	 * from an old task (lazy switching) and will erase it. Then until the
+	 * next context switch, no user-breakpoints will be installed.
+	 *
+	 * The real problem is that it's impossible to update both current and
+	 * last_debugged_task at the same instant, so there will always be a
+	 * window in which they disagree and a breakpoint might get triggered.
+	 * Since we use lazy switching, we are forced to assume that a
+	 * disagreement means that current is correct and last_debugged_task is
+	 * old.  But if you move the code above then you'll create a window in
+	 * which current is old and last_debugged_task is correct.
+	 */
+	if (unlikely(test_tsk_thread_flag(next_p, TIF_DEBUG)))
+		arch_install_thread_hw_breakpoint(next_p);
 
 	return prev_p;
 }
x86/kernel/process_64.c renamed from x86/kernel/process_64.c.orig +33 -0
Index: arch/x86/kernel/process_64.c
===================================================================
@@ -55,6 +55,8 @@
 #include <asm/idle.h>
 #include <asm/syscalls.h>
 #include <asm/ds.h>
+#include <asm/debugreg.h>
+#include <asm/hw_breakpoint.h>
 
 asmlinkage extern void ret_from_fork(void);
 
@@ -248,6 +250,8 @@ void release_thread(struct task_struct *
 			BUG();
 		}
 	}
+	if (unlikely(dead_task->thread.debugreg7))
+		flush_thread_hw_breakpoint(dead_task);
 }
 
 static inline void set_32bit_tls(struct task_struct *t, int tls, u32 addr)
@@ -303,12 +307,18 @@ int copy_thread(unsigned long clone_flag
 
 	p->thread.fs = me->thread.fs;
 	p->thread.gs = me->thread.gs;
+	p->thread.io_bitmap_ptr = NULL;
 
 	savesegment(gs, p->thread.gsindex);
 	savesegment(fs, p->thread.fsindex);
 	savesegment(es, p->thread.es);
 	savesegment(ds, p->thread.ds);
 
+	err = -ENOMEM;
+	if (unlikely(test_tsk_thread_flag(me, TIF_DEBUG)))
+		if (copy_thread_hw_breakpoint(me, p, clone_flags))
+			goto out;
+
 	if (unlikely(test_tsk_thread_flag(me, TIF_IO_BITMAP))) {
 		p->thread.io_bitmap_ptr = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL);
 		if (!p->thread.io_bitmap_ptr) {
@@ -347,6 +357,9 @@ out:
 		kfree(p->thread.io_bitmap_ptr);
 		p->thread.io_bitmap_max = 0;
 	}
+	if (err)
+		flush_thread_hw_breakpoint(p);
+
 	return err;
 }
 
@@ -492,6 +505,26 @@ __switch_to(struct task_struct *prev_p, 
 	 */
 	if (tsk_used_math(next_p) && next_p->fpu_counter > 5)
 		math_state_restore();
+	/*
+	 * There's a problem with moving the arch_install_thread_hw_breakpoint()
+	 * call before current is updated.  Suppose a kernel breakpoint is
+	 * triggered in between the two.  The hw-breakpoint handler will see
+	 * that current is different from the task pointer stored in
+	 * last_debugged_task, so it will think the task pointer is leftover
+	 * from an old task (lazy switching) and will erase it. Then until the
+	 * next context switch, no user-breakpoints will be installed.
+	 *
+	 * The real problem is that it's impossible to update both current and
+	 * last_debugged_task at the same instant, so there will always be a
+	 * window in which they disagree and a breakpoint might get triggered.
+	 * Since we use lazy switching, we are forced to assume that a
+	 * disagreement means that current is correct and last_debugged_task is
+	 * old.  But if you move the code above then you'll create a window in
+	 * which current is old and last_debugged_task is correct.
+	 */
+	if (unlikely(test_tsk_thread_flag(next_p, TIF_DEBUG)))
+		arch_install_thread_hw_breakpoint(next_p);
+
 	return prev_p;
 }
 
author
#15 lore raw

PATCH 6/12 Use the new wrapper routines to access debug registers in process/thread code

In reply to a message not in the archive

This patch enables the use of abstract debug registers in process-handling routines.

---
 arch/x86/kernel/process.c    |   23 ++++++-----------------
 arch/x86/kernel/process_32.c |   31 +++++++++++++++++++++++++++++++
 arch/x86/kernel/process_64.c |   33 +++++++++++++++++++++++++++++++++
 3 files changed, 70 insertions(+), 17 deletions(-)
x86/kernel/process.c renamed from x86/kernel/process.c.orig +6 -17
Index: arch/x86/kernel/process.c
===================================================================
@@ -16,6 +16,8 @@
 #include <asm/uaccess.h>
 #include <asm/i387.h>
 #include <asm/ds.h>
+#include <asm/debugreg.h>
+#include <asm/hw_breakpoint.h>
 
 unsigned long idle_halt;
 EXPORT_SYMBOL(idle_halt);
@@ -47,6 +49,8 @@ void free_thread_xstate(struct task_stru
 		kmem_cache_free(task_xstate_cachep, tsk->thread.xstate);
 		tsk->thread.xstate = NULL;
 	}
+	if (unlikely(test_tsk_thread_flag(tsk, TIF_DEBUG)))
+		flush_thread_hw_breakpoint(tsk);
 
 	WARN(tsk->thread.ds_ctx, "leaking DS context\n");
 }
@@ -105,14 +109,9 @@ void flush_thread(void)
 	}
 #endif
 
-	clear_tsk_thread_flag(tsk, TIF_DEBUG);
+	if (unlikely(test_tsk_thread_flag(tsk, TIF_DEBUG)))
+		flush_thread_hw_breakpoint(tsk);
 
-	tsk->thread.debugreg0 = 0;
-	tsk->thread.debugreg1 = 0;
-	tsk->thread.debugreg2 = 0;
-	tsk->thread.debugreg3 = 0;
-	tsk->thread.debugreg6 = 0;
-	tsk->thread.debugreg7 = 0;
 	memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array));
 	/*
 	 * Forget coprocessor state..
@@ -194,16 +193,6 @@ void __switch_to_xtra(struct task_struct
 	else if (next->debugctlmsr != prev->debugctlmsr)
 		update_debugctlmsr(next->debugctlmsr);
 
-	if (test_tsk_thread_flag(next_p, TIF_DEBUG)) {
-		set_debugreg(next->debugreg0, 0);
-		set_debugreg(next->debugreg1, 1);
-		set_debugreg(next->debugreg2, 2);
-		set_debugreg(next->debugreg3, 3);
-		/* no 4 and 5 */
-		set_debugreg(next->debugreg6, 6);
-		set_debugreg(next->debugreg7, 7);
-	}
-
 	if (test_tsk_thread_flag(prev_p, TIF_NOTSC) ^
 	    test_tsk_thread_flag(next_p, TIF_NOTSC)) {
 		/* prev and next are different */
x86/kernel/process_32.c renamed from x86/kernel/process_32.c.orig +31 -0
Index: arch/x86/kernel/process_32.c
===================================================================
@@ -61,6 +61,8 @@
 #include <asm/idle.h>
 #include <asm/syscalls.h>
 #include <asm/ds.h>
+#include <asm/debugreg.h>
+#include <asm/hw_breakpoint.h>
 
 asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
 
@@ -265,7 +267,14 @@ int copy_thread(unsigned long clone_flag
 
 	task_user_gs(p) = get_user_gs(regs);
 
+	p->thread.io_bitmap_ptr = NULL;
+
 	tsk = current;
+	err = -ENOMEM;
+	if (unlikely(test_tsk_thread_flag(tsk, TIF_DEBUG)))
+		if (copy_thread_hw_breakpoint(tsk, p, clone_flags))
+			goto out;
+
 	if (unlikely(test_tsk_thread_flag(tsk, TIF_IO_BITMAP))) {
 		p->thread.io_bitmap_ptr = kmemdup(tsk->thread.io_bitmap_ptr,
 						IO_BITMAP_BYTES, GFP_KERNEL);
@@ -285,10 +294,13 @@ int copy_thread(unsigned long clone_flag
 		err = do_set_thread_area(p, -1,
 			(struct user_desc __user *)childregs->si, 0);
 
+out:
 	if (err && p->thread.io_bitmap_ptr) {
 		kfree(p->thread.io_bitmap_ptr);
 		p->thread.io_bitmap_max = 0;
 	}
+	if (err)
+		flush_thread_hw_breakpoint(p);
 
 	clear_tsk_thread_flag(p, TIF_DS_AREA_MSR);
 	p->thread.ds_ctx = NULL;
@@ -427,6 +439,25 @@ __switch_to(struct task_struct *prev_p, 
 		lazy_load_gs(next->gs);
 
 	percpu_write(current_task, next_p);
+	/*
+	 * There's a problem with moving the arch_install_thread_hw_breakpoint()
+	 * call before current is updated.  Suppose a kernel breakpoint is
+	 * triggered in between the two.  The hw-breakpoint handler will see
+	 * that current is different from the task pointer stored in
+	 * last_debugged_task, so it will think the task pointer is leftover
+	 * from an old task (lazy switching) and will erase it. Then until the
+	 * next context switch, no user-breakpoints will be installed.
+	 *
+	 * The real problem is that it's impossible to update both current and
+	 * last_debugged_task at the same instant, so there will always be a
+	 * window in which they disagree and a breakpoint might get triggered.
+	 * Since we use lazy switching, we are forced to assume that a
+	 * disagreement means that current is correct and last_debugged_task is
+	 * old.  But if you move the code above then you'll create a window in
+	 * which current is old and last_debugged_task is correct.
+	 */
+	if (unlikely(test_tsk_thread_flag(next_p, TIF_DEBUG)))
+		arch_install_thread_hw_breakpoint(next_p);
 
 	return prev_p;
 }
x86/kernel/process_64.c renamed from x86/kernel/process_64.c.orig +33 -0
Index: arch/x86/kernel/process_64.c
===================================================================
@@ -55,6 +55,8 @@
 #include <asm/idle.h>
 #include <asm/syscalls.h>
 #include <asm/ds.h>
+#include <asm/debugreg.h>
+#include <asm/hw_breakpoint.h>
 
 asmlinkage extern void ret_from_fork(void);
 
@@ -248,6 +250,8 @@ void release_thread(struct task_struct *
 			BUG();
 		}
 	}
+	if (unlikely(dead_task->thread.debugreg7))
+		flush_thread_hw_breakpoint(dead_task);
 }
 
 static inline void set_32bit_tls(struct task_struct *t, int tls, u32 addr)
@@ -303,12 +307,18 @@ int copy_thread(unsigned long clone_flag
 
 	p->thread.fs = me->thread.fs;
 	p->thread.gs = me->thread.gs;
+	p->thread.io_bitmap_ptr = NULL;
 
 	savesegment(gs, p->thread.gsindex);
 	savesegment(fs, p->thread.fsindex);
 	savesegment(es, p->thread.es);
 	savesegment(ds, p->thread.ds);
 
+	err = -ENOMEM;
+	if (unlikely(test_tsk_thread_flag(me, TIF_DEBUG)))
+		if (copy_thread_hw_breakpoint(me, p, clone_flags))
+			goto out;
+
 	if (unlikely(test_tsk_thread_flag(me, TIF_IO_BITMAP))) {
 		p->thread.io_bitmap_ptr = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL);
 		if (!p->thread.io_bitmap_ptr) {
@@ -347,6 +357,9 @@ out:
 		kfree(p->thread.io_bitmap_ptr);
 		p->thread.io_bitmap_max = 0;
 	}
+	if (err)
+		flush_thread_hw_breakpoint(p);
+
 	return err;
 }
 
@@ -492,6 +505,26 @@ __switch_to(struct task_struct *prev_p, 
 	 */
 	if (tsk_used_math(next_p) && next_p->fpu_counter > 5)
 		math_state_restore();
+	/*
+	 * There's a problem with moving the arch_install_thread_hw_breakpoint()
+	 * call before current is updated.  Suppose a kernel breakpoint is
+	 * triggered in between the two.  The hw-breakpoint handler will see
+	 * that current is different from the task pointer stored in
+	 * last_debugged_task, so it will think the task pointer is leftover
+	 * from an old task (lazy switching) and will erase it. Then until the
+	 * next context switch, no user-breakpoints will be installed.
+	 *
+	 * The real problem is that it's impossible to update both current and
+	 * last_debugged_task at the same instant, so there will always be a
+	 * window in which they disagree and a breakpoint might get triggered.
+	 * Since we use lazy switching, we are forced to assume that a
+	 * disagreement means that current is correct and last_debugged_task is
+	 * old.  But if you move the code above then you'll create a window in
+	 * which current is old and last_debugged_task is correct.
+	 */
+	if (unlikely(test_tsk_thread_flag(next_p, TIF_DEBUG)))
+		arch_install_thread_hw_breakpoint(next_p);
+
 	return prev_p;
 }
 
author
#16 lore raw

PATCH 7/12 Modify signal handling code to refrain from re-enabling HW Breakpoints

In reply to a message not in the archive

From: Alan Stern <[email protected]>

This patch disables re-enabling of Hardware Breakpoint registers through the signal handling code. This is now done during hw_breakpoint_handler().

---
 arch/x86/kernel/signal.c |    9 ---------
 1 file changed, 9 deletions(-)
x86/kernel/signal.c renamed from x86/kernel/signal.c.orig +0 -9
Index: arch/x86/kernel/signal.c
===================================================================
@@ -799,15 +799,6 @@ static void do_signal(struct pt_regs *re
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
 	if (signr > 0) {
-		/*
-		 * Re-enable any watchpoints before delivering the
-		 * signal to user space. The processor register will
-		 * have been cleared if the watchpoint triggered
-		 * inside the kernel.
-		 */
-		if (current->thread.debugreg7)
-			set_debugreg(current->thread.debugreg7, 7);
-
 		/* Whee! Actually deliver the signal.  */
 		if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
 			/*
author
#17 lore raw

PATCH 7/12 Modify signal handling code to refrain from re-enabling HW Breakpoints

In reply to a message not in the archive

This patch disables re-enabling of Hardware Breakpoint registers through the signal handling code. This is now done during hw_breakpoint_handler().

---
 arch/x86/kernel/signal.c |    9 ---------
 1 file changed, 9 deletions(-)
x86/kernel/signal.c renamed from x86/kernel/signal.c.orig +0 -9
Index: arch/x86/kernel/signal.c
===================================================================
@@ -799,15 +799,6 @@ static void do_signal(struct pt_regs *re
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
 	if (signr > 0) {
-		/*
-		 * Re-enable any watchpoints before delivering the
-		 * signal to user space. The processor register will
-		 * have been cleared if the watchpoint triggered
-		 * inside the kernel.
-		 */
-		if (current->thread.debugreg7)
-			set_debugreg(current->thread.debugreg7, 7);
-
 		/* Whee! Actually deliver the signal.  */
 		if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
 			/*
author
#18 lore raw

PATCH 8/12 Modify Ptrace routines to access breakpoint registers

In reply to a message not in the archive

This patch modifies the ptrace code to use the new wrapper routines around the debug/breakpoint registers.

---
 arch/x86/kernel/ptrace.c |  232 ++++++++++++++++++++++++++++-------------------
 1 file changed, 142 insertions(+), 90 deletions(-)
x86/kernel/ptrace.c renamed from x86/kernel/ptrace.c.orig +142 -90
Index: arch/x86/kernel/ptrace.c
===================================================================
@@ -34,6 +34,7 @@
 #include <asm/prctl.h>
 #include <asm/proto.h>
 #include <asm/ds.h>
+#include <asm/hw_breakpoint.h>
 
 #include <trace/syscall.h>
 
@@ -136,11 +137,6 @@ static int set_segment_reg(struct task_s
 	return 0;
 }
 
-static unsigned long debugreg_addr_limit(struct task_struct *task)
-{
-	return TASK_SIZE - 3;
-}
-
 #else  /* CONFIG_X86_64 */
 
 #define FLAG_MASK		(FLAG_MASK_32 | X86_EFLAGS_NT)
@@ -265,15 +261,6 @@ static int set_segment_reg(struct task_s
 	return 0;
 }
 
-static unsigned long debugreg_addr_limit(struct task_struct *task)
-{
-#ifdef CONFIG_IA32_EMULATION
-	if (test_tsk_thread_flag(task, TIF_IA32))
-		return IA32_PAGE_OFFSET - 3;
-#endif
-	return TASK_SIZE_MAX - 7;
-}
-
 #endif	/* CONFIG_X86_32 */
 
 static unsigned long get_flags(struct task_struct *task)
@@ -464,95 +451,160 @@ static int genregs_set(struct task_struc
 }
 
 /*
- * This function is trivial and will be inlined by the compiler.
- * Having it separates the implementation details of debug
- * registers from the interface details of ptrace.
+ * Decode the length and type bits for a particular breakpoint as
+ * stored in debug register 7.  Return the "enabled" status.
  */
-static unsigned long ptrace_get_debugreg(struct task_struct *child, int n)
+static int decode_dr7(unsigned long dr7, int bpnum, unsigned *len,
+		unsigned *type)
 {
-	switch (n) {
-	case 0:		return child->thread.debugreg0;
-	case 1:		return child->thread.debugreg1;
-	case 2:		return child->thread.debugreg2;
-	case 3:		return child->thread.debugreg3;
-	case 6:		return child->thread.debugreg6;
-	case 7:		return child->thread.debugreg7;
-	}
-	return 0;
+	int temp = dr7 >> (DR_CONTROL_SHIFT + bpnum * DR_CONTROL_SIZE);
+
+	*len = (temp & 0xc) | 0x40;
+	*type = (temp & 0x3) | 0x80;
+	return (dr7 >> (bpnum * DR_ENABLE_SIZE)) & 0x3;
 }
 
-static int ptrace_set_debugreg(struct task_struct *child,
-			       int n, unsigned long data)
+static void ptrace_triggered(struct hw_breakpoint *bp, struct pt_regs *regs)
 {
+	struct thread_struct *thread = &(current->thread);
 	int i;
 
-	if (unlikely(n == 4 || n == 5))
-		return -EIO;
+	/* Store in the virtual DR6 register the fact that the breakpoint
+	 * was hit so the thread's debugger will see it.
+	 */
+	for (i = 0; i < hbp_kernel_pos; i++)
+		/*
+		 * We will check bp->info.address against the address stored in
+		 * thread's hbp structure and not debugreg[i]. This is to ensure
+		 * that the corresponding bit for 'i' in DR7 register is enabled
+		 */
+		if (bp->info.address == thread->hbp[i]->info.address)
+			break;
 
-	if (n < 4 && unlikely(data >= debugreg_addr_limit(child)))
-		return -EIO;
+	thread->debugreg6 |= (DR_TRAP0 << i);
+}
 
-	switch (n) {
-	case 0:		child->thread.debugreg0 = data; break;
-	case 1:		child->thread.debugreg1 = data; break;
-	case 2:		child->thread.debugreg2 = data; break;
-	case 3:		child->thread.debugreg3 = data; break;
+/*
+ * Handle ptrace writes to debug register 7.
+ */
+static int ptrace_write_dr7(struct task_struct *tsk, unsigned long data)
+{
+	struct thread_struct *thread = &(tsk->thread);
+	unsigned long old_dr7 = thread->debugreg7;
+	int i, orig_ret = 0, rc = 0;
+	int enabled, second_pass = 0;
+	unsigned len, type;
+	struct hw_breakpoint *bp;
 
-	case 6:
-		if ((data & ~0xffffffffUL) != 0)
-			return -EIO;
-		child->thread.debugreg6 = data;
-		break;
+	data &= ~DR_CONTROL_RESERVED;
+restore:
+	/*
+	 * Loop through all the hardware breakpoints, making the
+	 * appropriate changes to each.
+	 */
+	for (i = 0; i < HBP_NUM; i++) {
+		enabled = decode_dr7(data, i, &len, &type);
+		bp = thread->hbp[i];
+
+		if (!enabled) {
+			if (bp) {
+				/* Don't unregister the breakpoints right-away,
+				 * unless all register_user_hw_breakpoint()
+				 * requests have succeeded. This prevents
+				 * any window of opportunity for debug
+				 * register grabbing by other users.
+				 */
+				if (!second_pass)
+					continue;
+				unregister_user_hw_breakpoint(tsk, bp);
+				kfree(bp);
+			}
+			continue;
+		}
+		if (!bp) {
+			rc = -ENOMEM;
+			bp = kzalloc(sizeof(struct hw_breakpoint), GFP_KERNEL);
+			if (bp) {
+				bp->info.address = thread->debugreg[i];
+				bp->triggered = ptrace_triggered;
+				bp->info.len = len;
+				bp->info.type = type;
+				rc = register_user_hw_breakpoint(tsk, bp);
+				if (!rc)
+					set_tsk_thread_flag(tsk, TIF_DEBUG);
+				else
+					kfree(bp);
+			}
+		} else
+			rc = modify_user_hw_breakpoint(tsk, bp);
+		if (rc)
+			break;
+	}
+	/*
+	 * Make a second pass to free the remaining unused breakpoints
+	 * or to restore the original breakpoints if an error occurred.
+	 */
+	if (!second_pass) {
+		second_pass = 1;
+		if (rc < 0) {
+			orig_ret = rc;
+			data = old_dr7;
+		}
+		goto restore;
+	}
+	return ((orig_ret < 0) ? orig_ret : rc);
+}
 
-	case 7:
-		/*
-		 * Sanity-check data. Take one half-byte at once with
-		 * check = (val >> (16 + 4*i)) & 0xf. It contains the
-		 * R/Wi and LENi bits; bits 0 and 1 are R/Wi, and bits
-		 * 2 and 3 are LENi. Given a list of invalid values,
-		 * we do mask |= 1 << invalid_value, so that
-		 * (mask >> check) & 1 is a correct test for invalid
-		 * values.
-		 *
-		 * R/Wi contains the type of the breakpoint /
-		 * watchpoint, LENi contains the length of the watched
-		 * data in the watchpoint case.
-		 *
-		 * The invalid values are:
-		 * - LENi == 0x10 (undefined), so mask |= 0x0f00.	[32-bit]
-		 * - R/Wi == 0x10 (break on I/O reads or writes), so
-		 *   mask |= 0x4444.
-		 * - R/Wi == 0x00 && LENi != 0x00, so we have mask |=
-		 *   0x1110.
-		 *
-		 * Finally, mask = 0x0f00 | 0x4444 | 0x1110 == 0x5f54.
-		 *
-		 * See the Intel Manual "System Programming Guide",
-		 * 15.2.4
-		 *
-		 * Note that LENi == 0x10 is defined on x86_64 in long
-		 * mode (i.e. even for 32-bit userspace software, but
-		 * 64-bit kernel), so the x86_64 mask value is 0x5454.
-		 * See the AMD manual no. 24593 (AMD64 System Programming)
-		 */
-#ifdef CONFIG_X86_32
-#define	DR7_MASK	0x5f54
-#else
-#define	DR7_MASK	0x5554
-#endif
-		data &= ~DR_CONTROL_RESERVED;
-		for (i = 0; i < 4; i++)
-			if ((DR7_MASK >> ((data >> (16 + 4*i)) & 0xf)) & 1)
-				return -EIO;
-		child->thread.debugreg7 = data;
-		if (data)
-			set_tsk_thread_flag(child, TIF_DEBUG);
-		else
-			clear_tsk_thread_flag(child, TIF_DEBUG);
-		break;
+/*
+ * Handle PTRACE_PEEKUSR calls for the debug register area.
+ */
+unsigned long ptrace_get_debugreg(struct task_struct *tsk, int n)
+{
+	struct thread_struct *thread = &(tsk->thread);
+	unsigned long val = 0;
+
+	if (n < HBP_NUM)
+		val = thread->debugreg[n];
+	else if (n == 6)
+		val = thread->debugreg6;
+	else if (n == 7)
+		val = thread->debugreg7;
+	return val;
+}
+
+/*
+ * Handle PTRACE_POKEUSR calls for the debug register area.
+ */
+int ptrace_set_debugreg(struct task_struct *tsk, int n, unsigned long val)
+{
+	struct thread_struct *thread = &(tsk->thread);
+	int rc = 0;
+
+	/* There are no DR4 or DR5 registers */
+	if (n == 4 || n == 5)
+		return -EIO;
+
+	if (n == 6) {
+		tsk->thread.debugreg6 = val;
+		goto ret_path;
+	}
+	if (n < HBP_NUM) {
+		if (thread->hbp[n]) {
+			if (arch_check_va_in_userspace(val,
+					thread->hbp[n]->info.len) == 0) {
+				rc = -EIO;
+				goto ret_path;
+			}
+			thread->hbp[n]->info.address = val;
+		}
+		thread->debugreg[n] = val;
 	}
+	/* All that's left is DR7 */
+	if (n == 7)
+		rc = ptrace_write_dr7(tsk, val);
 
-	return 0;
+ret_path:
+	return rc;
 }
 
 /*
author
#19 lore raw

PATCH 8/12 Modify Ptrace routines to access breakpoint registers

In reply to a message not in the archive

This patch modifies the ptrace code to use the new wrapper routines around the debug/breakpoint registers.

---
 arch/x86/kernel/ptrace.c |  232 ++++++++++++++++++++++++++++-------------------
 1 file changed, 142 insertions(+), 90 deletions(-)
x86/kernel/ptrace.c renamed from x86/kernel/ptrace.c.orig +142 -90
Index: arch/x86/kernel/ptrace.c
===================================================================
@@ -34,6 +34,7 @@
 #include <asm/prctl.h>
 #include <asm/proto.h>
 #include <asm/ds.h>
+#include <asm/hw_breakpoint.h>
 
 #include <trace/syscall.h>
 
@@ -136,11 +137,6 @@ static int set_segment_reg(struct task_s
 	return 0;
 }
 
-static unsigned long debugreg_addr_limit(struct task_struct *task)
-{
-	return TASK_SIZE - 3;
-}
-
 #else  /* CONFIG_X86_64 */
 
 #define FLAG_MASK		(FLAG_MASK_32 | X86_EFLAGS_NT)
@@ -265,15 +261,6 @@ static int set_segment_reg(struct task_s
 	return 0;
 }
 
-static unsigned long debugreg_addr_limit(struct task_struct *task)
-{
-#ifdef CONFIG_IA32_EMULATION
-	if (test_tsk_thread_flag(task, TIF_IA32))
-		return IA32_PAGE_OFFSET - 3;
-#endif
-	return TASK_SIZE_MAX - 7;
-}
-
 #endif	/* CONFIG_X86_32 */
 
 static unsigned long get_flags(struct task_struct *task)
@@ -464,95 +451,160 @@ static int genregs_set(struct task_struc
 }
 
 /*
- * This function is trivial and will be inlined by the compiler.
- * Having it separates the implementation details of debug
- * registers from the interface details of ptrace.
+ * Decode the length and type bits for a particular breakpoint as
+ * stored in debug register 7.  Return the "enabled" status.
  */
-static unsigned long ptrace_get_debugreg(struct task_struct *child, int n)
+static int decode_dr7(unsigned long dr7, int bpnum, unsigned *len,
+		unsigned *type)
 {
-	switch (n) {
-	case 0:		return child->thread.debugreg0;
-	case 1:		return child->thread.debugreg1;
-	case 2:		return child->thread.debugreg2;
-	case 3:		return child->thread.debugreg3;
-	case 6:		return child->thread.debugreg6;
-	case 7:		return child->thread.debugreg7;
-	}
-	return 0;
+	int temp = dr7 >> (DR_CONTROL_SHIFT + bpnum * DR_CONTROL_SIZE);
+
+	*len = (temp & 0xc) | 0x40;
+	*type = (temp & 0x3) | 0x80;
+	return (dr7 >> (bpnum * DR_ENABLE_SIZE)) & 0x3;
 }
 
-static int ptrace_set_debugreg(struct task_struct *child,
-			       int n, unsigned long data)
+static void ptrace_triggered(struct hw_breakpoint *bp, struct pt_regs *regs)
 {
+	struct thread_struct *thread = &(current->thread);
 	int i;
 
-	if (unlikely(n == 4 || n == 5))
-		return -EIO;
+	/* Store in the virtual DR6 register the fact that the breakpoint
+	 * was hit so the thread's debugger will see it.
+	 */
+	for (i = 0; i < hbp_kernel_pos; i++)
+		/*
+		 * We will check bp->info.address against the address stored in
+		 * thread's hbp structure and not debugreg[i]. This is to ensure
+		 * that the corresponding bit for 'i' in DR7 register is enabled
+		 */
+		if (bp->info.address == thread->hbp[i]->info.address)
+			break;
 
-	if (n < 4 && unlikely(data >= debugreg_addr_limit(child)))
-		return -EIO;
+	thread->debugreg6 |= (DR_TRAP0 << i);
+}
 
-	switch (n) {
-	case 0:		child->thread.debugreg0 = data; break;
-	case 1:		child->thread.debugreg1 = data; break;
-	case 2:		child->thread.debugreg2 = data; break;
-	case 3:		child->thread.debugreg3 = data; break;
+/*
+ * Handle ptrace writes to debug register 7.
+ */
+static int ptrace_write_dr7(struct task_struct *tsk, unsigned long data)
+{
+	struct thread_struct *thread = &(tsk->thread);
+	unsigned long old_dr7 = thread->debugreg7;
+	int i, orig_ret = 0, rc = 0;
+	int enabled, second_pass = 0;
+	unsigned len, type;
+	struct hw_breakpoint *bp;
 
-	case 6:
-		if ((data & ~0xffffffffUL) != 0)
-			return -EIO;
-		child->thread.debugreg6 = data;
-		break;
+	data &= ~DR_CONTROL_RESERVED;
+restore:
+	/*
+	 * Loop through all the hardware breakpoints, making the
+	 * appropriate changes to each.
+	 */
+	for (i = 0; i < HBP_NUM; i++) {
+		enabled = decode_dr7(data, i, &len, &type);
+		bp = thread->hbp[i];
+
+		if (!enabled) {
+			if (bp) {
+				/* Don't unregister the breakpoints right-away,
+				 * unless all register_user_hw_breakpoint()
+				 * requests have succeeded. This prevents
+				 * any window of opportunity for debug
+				 * register grabbing by other users.
+				 */
+				if (!second_pass)
+					continue;
+				unregister_user_hw_breakpoint(tsk, bp);
+				kfree(bp);
+			}
+			continue;
+		}
+		if (!bp) {
+			rc = -ENOMEM;
+			bp = kzalloc(sizeof(struct hw_breakpoint), GFP_KERNEL);
+			if (bp) {
+				bp->info.address = thread->debugreg[i];
+				bp->triggered = ptrace_triggered;
+				bp->info.len = len;
+				bp->info.type = type;
+				rc = register_user_hw_breakpoint(tsk, bp);
+				if (!rc)
+					set_tsk_thread_flag(tsk, TIF_DEBUG);
+				else
+					kfree(bp);
+			}
+		} else
+			rc = modify_user_hw_breakpoint(tsk, bp);
+		if (rc)
+			break;
+	}
+	/*
+	 * Make a second pass to free the remaining unused breakpoints
+	 * or to restore the original breakpoints if an error occurred.
+	 */
+	if (!second_pass) {
+		second_pass = 1;
+		if (rc < 0) {
+			orig_ret = rc;
+			data = old_dr7;
+		}
+		goto restore;
+	}
+	return ((orig_ret < 0) ? orig_ret : rc);
+}
 
-	case 7:
-		/*
-		 * Sanity-check data. Take one half-byte at once with
-		 * check = (val >> (16 + 4*i)) & 0xf. It contains the
-		 * R/Wi and LENi bits; bits 0 and 1 are R/Wi, and bits
-		 * 2 and 3 are LENi. Given a list of invalid values,
-		 * we do mask |= 1 << invalid_value, so that
-		 * (mask >> check) & 1 is a correct test for invalid
-		 * values.
-		 *
-		 * R/Wi contains the type of the breakpoint /
-		 * watchpoint, LENi contains the length of the watched
-		 * data in the watchpoint case.
-		 *
-		 * The invalid values are:
-		 * - LENi == 0x10 (undefined), so mask |= 0x0f00.	[32-bit]
-		 * - R/Wi == 0x10 (break on I/O reads or writes), so
-		 *   mask |= 0x4444.
-		 * - R/Wi == 0x00 && LENi != 0x00, so we have mask |=
-		 *   0x1110.
-		 *
-		 * Finally, mask = 0x0f00 | 0x4444 | 0x1110 == 0x5f54.
-		 *
-		 * See the Intel Manual "System Programming Guide",
-		 * 15.2.4
-		 *
-		 * Note that LENi == 0x10 is defined on x86_64 in long
-		 * mode (i.e. even for 32-bit userspace software, but
-		 * 64-bit kernel), so the x86_64 mask value is 0x5454.
-		 * See the AMD manual no. 24593 (AMD64 System Programming)
-		 */
-#ifdef CONFIG_X86_32
-#define	DR7_MASK	0x5f54
-#else
-#define	DR7_MASK	0x5554
-#endif
-		data &= ~DR_CONTROL_RESERVED;
-		for (i = 0; i < 4; i++)
-			if ((DR7_MASK >> ((data >> (16 + 4*i)) & 0xf)) & 1)
-				return -EIO;
-		child->thread.debugreg7 = data;
-		if (data)
-			set_tsk_thread_flag(child, TIF_DEBUG);
-		else
-			clear_tsk_thread_flag(child, TIF_DEBUG);
-		break;
+/*
+ * Handle PTRACE_PEEKUSR calls for the debug register area.
+ */
+unsigned long ptrace_get_debugreg(struct task_struct *tsk, int n)
+{
+	struct thread_struct *thread = &(tsk->thread);
+	unsigned long val = 0;
+
+	if (n < HBP_NUM)
+		val = thread->debugreg[n];
+	else if (n == 6)
+		val = thread->debugreg6;
+	else if (n == 7)
+		val = thread->debugreg7;
+	return val;
+}
+
+/*
+ * Handle PTRACE_POKEUSR calls for the debug register area.
+ */
+int ptrace_set_debugreg(struct task_struct *tsk, int n, unsigned long val)
+{
+	struct thread_struct *thread = &(tsk->thread);
+	int rc = 0;
+
+	/* There are no DR4 or DR5 registers */
+	if (n == 4 || n == 5)
+		return -EIO;
+
+	if (n == 6) {
+		tsk->thread.debugreg6 = val;
+		goto ret_path;
+	}
+	if (n < HBP_NUM) {
+		if (thread->hbp[n]) {
+			if (arch_check_va_in_userspace(val,
+					thread->hbp[n]->info.len) == 0) {
+				rc = -EIO;
+				goto ret_path;
+			}
+			thread->hbp[n]->info.address = val;
+		}
+		thread->debugreg[n] = val;
 	}
+	/* All that's left is DR7 */
+	if (n == 7)
+		rc = ptrace_write_dr7(tsk, val);
 
-	return 0;
+ret_path:
+	return rc;
 }
 
 /*
author
#20 lore raw

PATCH 9/12 Cleanup HW Breakpoint registers before kexec

In reply to a message not in the archive

From: Alan Stern <[email protected]>

This patch disables Hardware breakpoints before doing a 'kexec' on the machine.

[K.Prasad: Split-out from the bigger patch and minor changes following
re-basing]

---
 arch/x86/kernel/machine_kexec_32.c |    2 ++
 arch/x86/kernel/machine_kexec_64.c |    2 ++
 2 files changed, 4 insertions(+)
x86/kernel/machine_kexec_32.c renamed from x86/kernel/machine_kexec_32.c.orig +2 -0
Index: arch/x86/kernel/machine_kexec_32.c
===================================================================
@@ -25,6 +25,7 @@
 #include <asm/desc.h>
 #include <asm/system.h>
 #include <asm/cacheflush.h>
+#include <asm/debugreg.h>
 
 static void set_idt(void *newidt, __u16 limit)
 {
@@ -202,6 +203,7 @@ void machine_kexec(struct kimage *image)
 
 	/* Interrupts aren't acceptable while we reboot */
 	local_irq_disable();
+	hw_breakpoint_disable();
 
 	if (image->preserve_context) {
 #ifdef CONFIG_X86_IO_APIC
x86/kernel/machine_kexec_64.c renamed from x86/kernel/machine_kexec_64.c.orig +2 -0
Index: arch/x86/kernel/machine_kexec_64.c
===================================================================
@@ -18,6 +18,7 @@
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
 #include <asm/mmu_context.h>
+#include <asm/debugreg.h>
 
 static int init_one_level2_page(struct kimage *image, pgd_t *pgd,
 				unsigned long addr)
@@ -282,6 +283,7 @@ void machine_kexec(struct kimage *image)
 
 	/* Interrupts aren't acceptable while we reboot */
 	local_irq_disable();
+	hw_breakpoint_disable();
 
 	if (image->preserve_context) {
 #ifdef CONFIG_X86_IO_APIC
author
#21 lore raw

PATCH 9/12 Cleanup HW Breakpoint registers before kexec

In reply to a message not in the archive

This patch disables Hardware breakpoints before doing a 'kexec' on the machine.

---
 arch/x86/kernel/machine_kexec_32.c |    2 ++
 arch/x86/kernel/machine_kexec_64.c |    2 ++
 2 files changed, 4 insertions(+)
x86/kernel/machine_kexec_32.c renamed from x86/kernel/machine_kexec_32.c.orig +2 -0
Index: arch/x86/kernel/machine_kexec_32.c
===================================================================
@@ -25,6 +25,7 @@
 #include <asm/desc.h>
 #include <asm/system.h>
 #include <asm/cacheflush.h>
+#include <asm/debugreg.h>
 
 static void set_idt(void *newidt, __u16 limit)
 {
@@ -202,6 +203,7 @@ void machine_kexec(struct kimage *image)
 
 	/* Interrupts aren't acceptable while we reboot */
 	local_irq_disable();
+	hw_breakpoint_disable();
 
 	if (image->preserve_context) {
 #ifdef CONFIG_X86_IO_APIC
x86/kernel/machine_kexec_64.c renamed from x86/kernel/machine_kexec_64.c.orig +2 -0
Index: arch/x86/kernel/machine_kexec_64.c
===================================================================
@@ -18,6 +18,7 @@
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
 #include <asm/mmu_context.h>
+#include <asm/debugreg.h>
 
 static int init_one_level2_page(struct kimage *image, pgd_t *pgd,
 				unsigned long addr)
@@ -282,6 +283,7 @@ void machine_kexec(struct kimage *image)
 
 	/* Interrupts aren't acceptable while we reboot */
 	local_irq_disable();
+	hw_breakpoint_disable();
 
 	if (image->preserve_context) {
 #ifdef CONFIG_X86_IO_APIC
author
#22 lore raw

PATCH 10/12 Sample HW breakpoint over kernel data address

In reply to a message not in the archive

This patch introduces a sample kernel module to demonstrate the use of Hardware Breakpoint feature. It places a breakpoint over the kernel variable 'pid_max' to monitor all write operations and emits a function-backtrace when done.

---
 samples/Kconfig                         |    6 ++
 samples/Makefile                        |    3 -
 samples/hw_breakpoint/Makefile          |    1 
 samples/hw_breakpoint/data_breakpoint.c |   83 ++++++++++++++++++++++++++++++++
 4 files changed, 92 insertions(+), 1 deletion(-)
Kconfig renamed from Kconfig.orig +6 -0
Index: samples/Kconfig
===================================================================
@@ -45,5 +45,11 @@ config SAMPLE_KRETPROBES
 	default m
 	depends on SAMPLE_KPROBES && KRETPROBES
 
+config SAMPLE_HW_BREAKPOINT
+	tristate "Build kernel hardware breakpoint examples -- loadable modules only"
+	depends on HAVE_HW_BREAKPOINT && m
+	help
+	  This builds kernel hardware breakpoint example modules.
+
 endif # SAMPLES
 
Makefile renamed from Makefile.orig +2 -1
Index: samples/Makefile
===================================================================
@@ -1,3 +1,4 @@
 # Makefile for Linux samples code
 
-obj-$(CONFIG_SAMPLES)	+= markers/ kobject/ kprobes/ tracepoints/ trace_events/
+obj-$(CONFIG_SAMPLES)	+= markers/ kobject/ kprobes/ tracepoints/ \
+			trace_events/ hw_breakpoint/
hw_breakpoint/Makefile new file +1 -0
Index: samples/hw_breakpoint/Makefile
===================================================================
@@ -0,0 +1 @@
+obj-$(CONFIG_SAMPLE_HW_BREAKPOINT) += data_breakpoint.o
hw_breakpoint/data_breakpoint.c new file +83 -0

83 lines not on this page · raw message

author
#23 lore raw

PATCH 10/12 Sample HW breakpoint over kernel data address

In reply to a message not in the archive

This patch introduces a sample kernel module to demonstrate the use of Hardware Breakpoint feature. It places a breakpoint over the kernel variable 'pid_max' to monitor all write operations and emits a function-backtrace when done.

---
 samples/Kconfig                         |    6 ++
 samples/Makefile                        |    3 -
 samples/hw_breakpoint/Makefile          |    1 
 samples/hw_breakpoint/data_breakpoint.c |   83 ++++++++++++++++++++++++++++++++
 4 files changed, 92 insertions(+), 1 deletion(-)
Kconfig renamed from Kconfig.orig +6 -0
Index: samples/Kconfig
===================================================================
@@ -45,5 +45,11 @@ config SAMPLE_KRETPROBES
 	default m
 	depends on SAMPLE_KPROBES && KRETPROBES
 
+config SAMPLE_HW_BREAKPOINT
+	tristate "Build kernel hardware breakpoint examples -- loadable modules only"
+	depends on HAVE_HW_BREAKPOINT && m
+	help
+	  This builds kernel hardware breakpoint example modules.
+
 endif # SAMPLES
 
Makefile renamed from Makefile.orig +2 -1
Index: samples/Makefile
===================================================================
@@ -1,3 +1,4 @@
 # Makefile for Linux samples code
 
-obj-$(CONFIG_SAMPLES)	+= markers/ kobject/ kprobes/ tracepoints/ trace_events/
+obj-$(CONFIG_SAMPLES)	+= markers/ kobject/ kprobes/ tracepoints/ \
+			trace_events/ hw_breakpoint/
hw_breakpoint/Makefile new file +1 -0
Index: samples/hw_breakpoint/Makefile
===================================================================
@@ -0,0 +1 @@
+obj-$(CONFIG_SAMPLE_HW_BREAKPOINT) += data_breakpoint.o
hw_breakpoint/data_breakpoint.c new file +83 -0

83 lines not on this page · raw message

author
#24 lore raw

PATCH 11/12 ftrace plugin for kernel symbol tracing using HW Breakpoint interfaces - v5

In reply to a message not in the archive

This patch adds an ftrace plugin to detect and profile memory access over kernel variables. It uses HW Breakpoint interfaces to 'watch memory addresses.

---
 kernel/trace/Kconfig          |   21 +
 kernel/trace/Makefile         |    1 
 kernel/trace/trace.h          |   22 +
 kernel/trace/trace_ksym.c     |  525 ++++++++++++++++++++++++++++++++++++++++++
 kernel/trace/trace_selftest.c |   54 ++++
 5 files changed, 623 insertions(+)
trace/Kconfig renamed from trace/Kconfig.orig +21 -0
Index: kernel/trace/Kconfig
===================================================================
@@ -309,6 +309,27 @@ config POWER_TRACER
 	  power management decisions, specifically the C-state and P-state
 	  behavior.
 
+config KSYM_TRACER
+	bool "Trace read and write access on kernel memory locations"
+	depends on HAVE_HW_BREAKPOINT
+	select TRACING
+	help
+	  This tracer helps find read and write operations on any given kernel
+	  symbol i.e. /proc/kallsyms.
+
+config PROFILE_KSYM_TRACER
+	bool "Profile all kernel memory accesses on 'watched' variables"
+	depends on KSYM_TRACER
+	help
+	  This tracer profiles kernel accesses on variables watched through the
+	  ksym tracer ftrace plugin. Depending upon the hardware, all read
+	  and write operations on kernel variables can be monitored for
+	  accesses.
+
+	  The results will be displayed in:
+	  /debugfs/tracing/profile_ksym
+
+	  Say N if unsure.
 
 config STACK_TRACER
 	bool "Trace max stack"
trace/Makefile renamed from trace/Makefile.orig +1 -0
Index: kernel/trace/Makefile
===================================================================
@@ -52,5 +52,6 @@ obj-$(CONFIG_FTRACE_SYSCALLS) += trace_s
 obj-$(CONFIG_EVENT_PROFILE) += trace_event_profile.o
 obj-$(CONFIG_EVENT_TRACING) += trace_events_filter.o
 obj-$(CONFIG_EVENT_TRACING) += trace_mm.o
+obj-$(CONFIG_KSYM_TRACER) += trace_ksym.o
 
 libftrace-y := ftrace.o
trace/trace.h renamed from trace/trace.h.orig +22 -0
Index: kernel/trace/trace.h
===================================================================
@@ -15,6 +15,10 @@
 #include <linux/trace_seq.h>
 #include <linux/ftrace_event.h>
 
+#ifdef CONFIG_KSYM_TRACER
+#include <asm/hw_breakpoint.h>
+#endif
+
 enum trace_type {
 	__TRACE_FIRST_TYPE = 0,
 
@@ -40,6 +44,7 @@ enum trace_type {
 	TRACE_KMEM_FREE,
 	TRACE_POWER,
 	TRACE_BLK,
+	TRACE_KSYM,
 
 	__TRACE_LAST_TYPE,
 };
@@ -207,6 +212,20 @@ struct syscall_trace_exit {
 	unsigned long		ret;
 };
 
+#define KSYM_SELFTEST_ENTRY "ksym_selftest_dummy"
+
+struct trace_ksym {
+	struct trace_entry	ent;
+	struct hw_breakpoint	*ksym_hbp;
+	unsigned long		ksym_addr;
+	unsigned long		ip;
+#ifdef CONFIG_PROFILE_KSYM_TRACER
+	unsigned long		counter;
+#endif
+	struct hlist_node	ksym_hlist;
+	char			ksym_name[KSYM_NAME_LEN];
+	char			p_name[TASK_COMM_LEN];
+};
 
 /*
  * trace_flag_type is an enumeration that holds different
@@ -323,6 +342,7 @@ extern void __ftrace_bad_type(void);
 			  TRACE_SYSCALL_ENTER);				\
 		IF_ASSIGN(var, ent, struct syscall_trace_exit,		\
 			  TRACE_SYSCALL_EXIT);				\
+		IF_ASSIGN(var, ent, struct trace_ksym, TRACE_KSYM);	\
 		__ftrace_bad_type();					\
 	} while (0)
 
@@ -540,6 +560,8 @@ extern int trace_selftest_startup_branch
 					 struct trace_array *tr);
 extern int trace_selftest_startup_hw_branches(struct tracer *trace,
 					      struct trace_array *tr);
+extern int trace_selftest_startup_ksym(struct tracer *trace,
+					 struct trace_array *tr);
 #endif /* CONFIG_FTRACE_STARTUP_TEST */
 
 extern void *head_page(struct trace_array_cpu *data);
trace/trace_ksym.c new file +525 -0

525 lines not on this page · raw message

trace/trace_selftest.c renamed from trace/trace_selftest.c.orig +54 -0

63 lines not on this page · raw message

author
#25 lore raw

PATCH 11/12 ftrace plugin for kernel symbol tracing using HW Breakpoint interfaces - v5

In reply to a message not in the archive

This patch adds an ftrace plugin to detect and profile memory access over kernel variables. It uses HW Breakpoint interfaces to 'watch memory addresses.

---
 kernel/trace/Kconfig          |   21 +
 kernel/trace/Makefile         |    1 
 kernel/trace/trace.h          |   22 +
 kernel/trace/trace_ksym.c     |  525 ++++++++++++++++++++++++++++++++++++++++++
 kernel/trace/trace_selftest.c |   54 ++++
 5 files changed, 623 insertions(+)
trace/Kconfig renamed from trace/Kconfig.orig +21 -0
Index: kernel/trace/Kconfig
===================================================================
@@ -309,6 +309,27 @@ config POWER_TRACER
 	  power management decisions, specifically the C-state and P-state
 	  behavior.
 
+config KSYM_TRACER
+	bool "Trace read and write access on kernel memory locations"
+	depends on HAVE_HW_BREAKPOINT
+	select TRACING
+	help
+	  This tracer helps find read and write operations on any given kernel
+	  symbol i.e. /proc/kallsyms.
+
+config PROFILE_KSYM_TRACER
+	bool "Profile all kernel memory accesses on 'watched' variables"
+	depends on KSYM_TRACER
+	help
+	  This tracer profiles kernel accesses on variables watched through the
+	  ksym tracer ftrace plugin. Depending upon the hardware, all read
+	  and write operations on kernel variables can be monitored for
+	  accesses.
+
+	  The results will be displayed in:
+	  /debugfs/tracing/profile_ksym
+
+	  Say N if unsure.
 
 config STACK_TRACER
 	bool "Trace max stack"
trace/Makefile renamed from trace/Makefile.orig +1 -0
Index: kernel/trace/Makefile
===================================================================
@@ -52,5 +52,6 @@ obj-$(CONFIG_FTRACE_SYSCALLS) += trace_s
 obj-$(CONFIG_EVENT_PROFILE) += trace_event_profile.o
 obj-$(CONFIG_EVENT_TRACING) += trace_events_filter.o
 obj-$(CONFIG_EVENT_TRACING) += trace_mm.o
+obj-$(CONFIG_KSYM_TRACER) += trace_ksym.o
 
 libftrace-y := ftrace.o
trace/trace.h renamed from trace/trace.h.orig +22 -0
Index: kernel/trace/trace.h
===================================================================
@@ -15,6 +15,10 @@
 #include <linux/trace_seq.h>
 #include <linux/ftrace_event.h>
 
+#ifdef CONFIG_KSYM_TRACER
+#include <asm/hw_breakpoint.h>
+#endif
+
 enum trace_type {
 	__TRACE_FIRST_TYPE = 0,
 
@@ -40,6 +44,7 @@ enum trace_type {
 	TRACE_KMEM_FREE,
 	TRACE_POWER,
 	TRACE_BLK,
+	TRACE_KSYM,
 
 	__TRACE_LAST_TYPE,
 };
@@ -207,6 +212,20 @@ struct syscall_trace_exit {
 	unsigned long		ret;
 };
 
+#define KSYM_SELFTEST_ENTRY "ksym_selftest_dummy"
+
+struct trace_ksym {
+	struct trace_entry	ent;
+	struct hw_breakpoint	*ksym_hbp;
+	unsigned long		ksym_addr;
+	unsigned long		ip;
+#ifdef CONFIG_PROFILE_KSYM_TRACER
+	unsigned long		counter;
+#endif
+	struct hlist_node	ksym_hlist;
+	char			ksym_name[KSYM_NAME_LEN];
+	char			p_name[TASK_COMM_LEN];
+};
 
 /*
  * trace_flag_type is an enumeration that holds different
@@ -323,6 +342,7 @@ extern void __ftrace_bad_type(void);
 			  TRACE_SYSCALL_ENTER);				\
 		IF_ASSIGN(var, ent, struct syscall_trace_exit,		\
 			  TRACE_SYSCALL_EXIT);				\
+		IF_ASSIGN(var, ent, struct trace_ksym, TRACE_KSYM);	\
 		__ftrace_bad_type();					\
 	} while (0)
 
@@ -540,6 +560,8 @@ extern int trace_selftest_startup_branch
 					 struct trace_array *tr);
 extern int trace_selftest_startup_hw_branches(struct tracer *trace,
 					      struct trace_array *tr);
+extern int trace_selftest_startup_ksym(struct tracer *trace,
+					 struct trace_array *tr);
 #endif /* CONFIG_FTRACE_STARTUP_TEST */
 
 extern void *head_page(struct trace_array_cpu *data);
trace/trace_ksym.c new file +525 -0

525 lines not on this page · raw message

trace/trace_selftest.c renamed from trace/trace_selftest.c.orig +54 -0

63 lines not on this page · raw message

author
#26 lore raw

PATCH 12/12 Reset bits in dr6 after the corresponding exception is handled

In reply to a message not in the archive

This patch resets the bit in dr6 after the corresponding exception is handled in code.

---
 arch/x86/kernel/hw_breakpoint.c |   13 +++++++++++--
 arch/x86/kernel/kgdb.c          |    6 ++++++
 arch/x86/kernel/kprobes.c       |    9 ++++++++-
 arch/x86/kernel/traps.c         |    4 ++--
 arch/x86/mm/kmmio.c             |    8 +++++++-
 5 files changed, 34 insertions(+), 6 deletions(-)
arch/x86/kernel/traps.c +2 -2
Index: linux-2.6-tip.hbkpt/arch/x86/kernel/traps.c
===================================================================
@@ -550,8 +550,8 @@ dotraplinkage void __kprobes do_debug(st
 	/* Store the virtualized DR6 value */
 	tsk->thread.debugreg6 = dr6;
 
-	if (notify_die(DIE_DEBUG, "debug", regs, dr6, error_code,
-						SIGTRAP) == NOTIFY_STOP)
+	if (notify_die(DIE_DEBUG, "debug", regs, PTR_ERR(&dr6), error_code,
+							SIGTRAP) == NOTIFY_STOP)
 		return;
 
 	/* It's safe to allow irq's after DR6 has been saved */
arch/x86/kernel/kgdb.c +6 -0
Index: linux-2.6-tip.hbkpt/arch/x86/kernel/kgdb.c
===================================================================
@@ -43,6 +43,7 @@
 #include <linux/smp.h>
 #include <linux/nmi.h>
 
+#include <asm/debugreg.h>
 #include <asm/apicdef.h>
 #include <asm/system.h>
 
@@ -433,6 +434,11 @@ single_step_cont(struct pt_regs *regs, s
 			"resuming...\n");
 	kgdb_arch_handle_exception(args->trapnr, args->signr,
 				   args->err, "c", "", regs);
+	/*
+	 * Reset the BS bit in dr6 (pointed by args->err) to
+	 * denote completion of processing
+	 */
+	(*(unsigned long *)ERR_PTR(args->err)) &= ~DR_STEP;
 
 	return NOTIFY_STOP;
 }
arch/x86/kernel/kprobes.c +8 -1
Index: linux-2.6-tip.hbkpt/arch/x86/kernel/kprobes.c
===================================================================
@@ -54,6 +54,7 @@
 #include <asm/pgtable.h>
 #include <asm/uaccess.h>
 #include <asm/alternative.h>
+#include <asm/debugreg.h>
 
 void jprobe_return_end(void);
 
@@ -967,8 +968,14 @@ int __kprobes kprobe_exceptions_notify(s
 			ret = NOTIFY_STOP;
 		break;
 	case DIE_DEBUG:
-		if (post_kprobe_handler(args->regs))
+		if (post_kprobe_handler(args->regs)) {
+			/*
+			 * Reset the BS bit in dr6 (pointed by args->err) to
+			 * denote completion of processing
+			 */
+			(*(unsigned long *)ERR_PTR(args->err)) &= ~DR_STEP;
 			ret = NOTIFY_STOP;
+		}
 		break;
 	case DIE_GPF:
 		/*
arch/x86/mm/kmmio.c +7 -1
Index: linux-2.6-tip.hbkpt/arch/x86/mm/kmmio.c
===================================================================
@@ -540,8 +540,14 @@ kmmio_die_notifier(struct notifier_block
 	struct die_args *arg = args;
 
 	if (val == DIE_DEBUG && (arg->err & DR_STEP))
-		if (post_kmmio_handler(arg->err, arg->regs) == 1)
+		if (post_kmmio_handler(arg->err, arg->regs) == 1) {
+			/*
+			 * Reset the BS bit in dr6 (pointed by args->err) to
+			 * denote completion of processing
+			 */
+			(*(unsigned long *)ERR_PTR(arg->err)) &= ~DR_STEP;
 			return NOTIFY_STOP;
+		}
 
 	return NOTIFY_DONE;
 }
arch/x86/kernel/hw_breakpoint.c +11 -2
Index: linux-2.6-tip.hbkpt/arch/x86/kernel/hw_breakpoint.c
===================================================================
@@ -301,8 +301,12 @@ int __kprobes hw_breakpoint_handler(stru
 {
 	int i, cpu, rc = NOTIFY_STOP;
 	struct hw_breakpoint *bp;
-	/* The DR6 value is stored in args->err */
-	unsigned long dr7, dr6 = args->err;
+	unsigned long dr7, dr6;
+	unsigned long *dr6_p;
+
+	/* The DR6 value is pointed by args->err */
+	dr6_p = (unsigned long *)ERR_PTR(args->err);
+	dr6 = *dr6_p;
 
 	/* Do an early return if no trap bits are set in DR6 */
 	if ((dr6 & DR_TRAP_BITS) == 0)
@@ -346,6 +350,11 @@ int __kprobes hw_breakpoint_handler(stru
 			continue;
 
 		(bp->triggered)(bp, args->regs);
+		/*
+		 * Reset the 'i'th TRAP bit in dr6 to denote completion of
+		 * exception handling
+		 */
+		(*dr6_p) &= ~(DR_TRAP0 << i);
 	}
 	if (dr6 & (~DR_TRAP_BITS))
 		rc = NOTIFY_DONE;
author
#27 lore raw

PATCH 12/12 Reset bits in dr6 after the corresponding exception is handled

In reply to a message not in the archive

This patch resets the bit in dr6 after the corresponding exception is handled in code.

---
 arch/x86/kernel/hw_breakpoint.c |   13 +++++++++++--
 arch/x86/kernel/kgdb.c          |    6 ++++++
 arch/x86/kernel/kprobes.c       |    9 ++++++++-
 arch/x86/kernel/traps.c         |    4 ++--
 arch/x86/mm/kmmio.c             |    8 +++++++-
 5 files changed, 34 insertions(+), 6 deletions(-)
arch/x86/kernel/traps.c +2 -2
Index: linux-2.6-tip.hbkpt/arch/x86/kernel/traps.c
===================================================================
@@ -550,8 +550,8 @@ dotraplinkage void __kprobes do_debug(st
 	/* Store the virtualized DR6 value */
 	tsk->thread.debugreg6 = dr6;
 
-	if (notify_die(DIE_DEBUG, "debug", regs, dr6, error_code,
-						SIGTRAP) == NOTIFY_STOP)
+	if (notify_die(DIE_DEBUG, "debug", regs, PTR_ERR(&dr6), error_code,
+							SIGTRAP) == NOTIFY_STOP)
 		return;
 
 	/* It's safe to allow irq's after DR6 has been saved */
arch/x86/kernel/kgdb.c +6 -0
Index: linux-2.6-tip.hbkpt/arch/x86/kernel/kgdb.c
===================================================================
@@ -43,6 +43,7 @@
 #include <linux/smp.h>
 #include <linux/nmi.h>
 
+#include <asm/debugreg.h>
 #include <asm/apicdef.h>
 #include <asm/system.h>
 
@@ -433,6 +434,11 @@ single_step_cont(struct pt_regs *regs, s
 			"resuming...\n");
 	kgdb_arch_handle_exception(args->trapnr, args->signr,
 				   args->err, "c", "", regs);
+	/*
+	 * Reset the BS bit in dr6 (pointed by args->err) to
+	 * denote completion of processing
+	 */
+	(*(unsigned long *)ERR_PTR(args->err)) &= ~DR_STEP;
 
 	return NOTIFY_STOP;
 }
arch/x86/kernel/kprobes.c +8 -1
Index: linux-2.6-tip.hbkpt/arch/x86/kernel/kprobes.c
===================================================================
@@ -54,6 +54,7 @@
 #include <asm/pgtable.h>
 #include <asm/uaccess.h>
 #include <asm/alternative.h>
+#include <asm/debugreg.h>
 
 void jprobe_return_end(void);
 
@@ -967,8 +968,14 @@ int __kprobes kprobe_exceptions_notify(s
 			ret = NOTIFY_STOP;
 		break;
 	case DIE_DEBUG:
-		if (post_kprobe_handler(args->regs))
+		if (post_kprobe_handler(args->regs)) {
+			/*
+			 * Reset the BS bit in dr6 (pointed by args->err) to
+			 * denote completion of processing
+			 */
+			(*(unsigned long *)ERR_PTR(args->err)) &= ~DR_STEP;
 			ret = NOTIFY_STOP;
+		}
 		break;
 	case DIE_GPF:
 		/*
arch/x86/mm/kmmio.c +7 -1
Index: linux-2.6-tip.hbkpt/arch/x86/mm/kmmio.c
===================================================================
@@ -540,8 +540,14 @@ kmmio_die_notifier(struct notifier_block
 	struct die_args *arg = args;
 
 	if (val == DIE_DEBUG && (arg->err & DR_STEP))
-		if (post_kmmio_handler(arg->err, arg->regs) == 1)
+		if (post_kmmio_handler(arg->err, arg->regs) == 1) {
+			/*
+			 * Reset the BS bit in dr6 (pointed by args->err) to
+			 * denote completion of processing
+			 */
+			(*(unsigned long *)ERR_PTR(arg->err)) &= ~DR_STEP;
 			return NOTIFY_STOP;
+		}
 
 	return NOTIFY_DONE;
 }
arch/x86/kernel/hw_breakpoint.c +11 -2
Index: linux-2.6-tip.hbkpt/arch/x86/kernel/hw_breakpoint.c
===================================================================
@@ -301,8 +301,12 @@ int __kprobes hw_breakpoint_handler(stru
 {
 	int i, cpu, rc = NOTIFY_STOP;
 	struct hw_breakpoint *bp;
-	/* The DR6 value is stored in args->err */
-	unsigned long dr7, dr6 = args->err;
+	unsigned long dr7, dr6;
+	unsigned long *dr6_p;
+
+	/* The DR6 value is pointed by args->err */
+	dr6_p = (unsigned long *)ERR_PTR(args->err);
+	dr6 = *dr6_p;
 
 	/* Do an early return if no trap bits are set in DR6 */
 	if ((dr6 & DR_TRAP_BITS) == 0)
@@ -346,6 +350,11 @@ int __kprobes hw_breakpoint_handler(stru
 			continue;
 
 		(bp->triggered)(bp, args->regs);
+		/*
+		 * Reset the 'i'th TRAP bit in dr6 to denote completion of
+		 * exception handling
+		 */
+		(*dr6_p) &= ~(DR_TRAP0 << i);
 	}
 	if (dr6 & (~DR_TRAP_BITS))
 		rc = NOTIFY_DONE;