Skip to contentSkip to conversation

Writing a YAFFS image to NAND

U-Boot Peter Barada 3 participants 4 messages Apr 3, 2009 – May 19, 2009

lore
Share & tools
lore
#0 lore raw

Is there support in the 2009.03 version of U-boot to allow writing a YAFFS image created by mkyaffs2image to NAND, including the meta-data in the OOB?

Looking over the nand write/read commands, they look to ignore the OOB data interleaved in the image (i.e. 2048+16 bytes per page for large-block NAND). I did see a patch from fmandarino on the list, but that doesn't look to be in the 2009.03 codebase.

Thanks in advance!

Signature · 1 line
Peter Barada <[email protected]>
#1 lore raw
Quoted 3 lines · Peter Barada

Is there support in the 2009.03 version of U-boot to allow writing a YAFFS image created by mkyaffs2image to NAND, including the meta-data in the OOB?

Not that I know of (unless something in cmd_yaffs2.c can do it).

Quoted 4 lines

Looking over the nand write/read commands, they look to ignore the OOB data interleaved in the image (i.e. 2048+16 bytes per page for large-block NAND). I did see a patch from fmandarino on the list, but that doesn't look to be in the 2009.03 codebase.

That was several years ago; if someone wants to submit a proper patch against current u-boot (without the pre-2.6.18 support, or at least with the newer format being the default), I'll apply it. Better yet would be a more general mechanism whereby the user specifies how many OOB bytes are interleaved in the supplied image, without any specific knowledege of yaffs.

-Scott

#2 lore raw
Quoted 12 lines · On Friday 03 April 2009 14:54:06 Scott Wood wrote:
Quoted 3 lines · Peter Barada

Is there support in the 2009.03 version of U-boot to allow writing a YAFFS image created by mkyaffs2image to NAND, including the meta-data in the OOB?

Not that I know of (unless something in cmd_yaffs2.c can do it).

Quoted 4 lines

Looking over the nand write/read commands, they look to ignore the OOB data interleaved in the image (i.e. 2048+16 bytes per page for large-block NAND). I did see a patch from fmandarino on the list, but that doesn't look to be in the 2009.03 codebase.

Quoted 6 lines

That was several years ago; if someone wants to submit a proper patch against current u-boot (without the pre-2.6.18 support, or at least with the newer format being the default), I'll apply it. Better yet would be a more general mechanism whereby the user specifies how many OOB bytes are interleaved in the supplied image, without any specific knowledege of yaffs.

i'm in windows atm so i cant post a proper patch, but this link should be useful:
http://blackfin.uclinux.org/git/?p=readonly-mirrors/u-
boot.git;a=commitdiff;h=b71bce9d98776f4b5aeecfae151f8961a6ef8e98 -mike

#3 lore raw
In reply to Scott Wood
Quoted 12 lines · On Friday 03 April 2009 14:54:06 Scott Wood wrote:
Quoted 3 lines · Peter Barada

Is there support in the 2009.03 version of U-boot to allow writing a YAFFS image created by mkyaffs2image to NAND, including the meta-data in the OOB?

Not that I know of (unless something in cmd_yaffs2.c can do it).

Quoted 4 lines

Looking over the nand write/read commands, they look to ignore the OOB data interleaved in the image (i.e. 2048+16 bytes per page for large-block NAND). I did see a patch from fmandarino on the list, but that doesn't look to be in the 2009.03 codebase.

Quoted 6 lines

That was several years ago; if someone wants to submit a proper patch against current u-boot (without the pre-2.6.18 support, or at least with the newer format being the default), I'll apply it. Better yet would be a more general mechanism whereby the user specifies how many OOB bytes are interleaved in the supplied image, without any specific knowledege of yaffs.

here's an updated patch for 2009.03, but i dont think it'll work with latest master due to all the oob stuff being dropped ?
http://git.denx.de/?p=u-boot/u-boot-blackfin.git;a=commitdiff;h=44f07de8cc94836cd3b0fd2fb0cf8b8651461087
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20090519/f87d684a/attachment.pgp