Skip to contentSkip to conversation

OMAP4: Create board support for OMAP_4430SDP.

PATCH New Santosh Shilimkar 2 participants 5 messages May 19, 2009 – May 20, 2009

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

(patch is rebased on 2.6.30-rc6. The older version was based on 2.6.30-rc2)

This patch creates the bare minimal board files to support OMAP_4430SDP. Additinaly new omap44xx.h is created which contains the base addresses for OMAP4430. File omap34xx.h is adapted to avoid multiple definitions of common omap base address definitions.

---
 arch/arm/mach-omap2/board-4430sdp.c        |   94 ++++++++++++++++++++++++++++
 arch/arm/plat-omap/include/mach/hardware.h |    1 +
 arch/arm/plat-omap/include/mach/omap34xx.h |   10 ++--
 arch/arm/plat-omap/include/mach/omap44xx.h |   61 ++++++++++++++++++
 4 files changed, 161 insertions(+), 5 deletions(-)
 create mode 100644 arch/arm/mach-omap2/board-4430sdp.c
 create mode 100644 arch/arm/plat-omap/include/mach/omap44xx.h
arch/arm/mach-omap2/board-4430sdp.c new file +94 -0
new file mode 100644
index 0000000..57e477b
@@ -0,0 +1,94 @@
+/*
+ * Board support file for OMAP4430 SDP.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * Author: Santosh Shilimkar <[email protected]>
+ *
+ * Based on mach-omap2/board-3430sdp.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/control.h>
+#include <mach/timer-gp.h>
+#include <asm/hardware/gic.h>
+
+static struct platform_device sdp4430_lcd_device = {
+	.name		= "sdp4430_lcd",
+	.id		= -1,
+};
+
+static struct platform_device *sdp4430_devices[] __initdata = {
+	&sdp4430_lcd_device,
+};
+
+static struct omap_uart_config sdp4430_uart_config __initdata = {
+	.enabled_uarts	= (1 << 0) | (1 << 1) | (1 << 2),
+};
+
+static struct omap_lcd_config sdp4430_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static struct omap_board_config_kernel sdp4430_config[] __initdata = {
+	{ OMAP_TAG_UART,	&sdp4430_uart_config },
+	{ OMAP_TAG_LCD,		&sdp4430_lcd_config },
+};
+
+static void __init gic_init_irq(void)
+{
+	gic_dist_init(0, IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29);
+	gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
+}
+
+static void __init omap_4430sdp_init_irq(void)
+{
+	omap2_init_common_hw(NULL);
+#ifdef CONFIG_OMAP_32K_TIMER
+	omap2_gp_clockevent_set_gptimer(1);
+#endif
+	gic_init_irq();
+	omap_gpio_init();
+}
+
+
+static void __init omap_4430sdp_init(void)
+{
+	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
+	omap_board_config = sdp4430_config;
+	omap_board_config_size = ARRAY_SIZE(sdp4430_config);
+	omap_serial_init();
+}
+
+static void __init omap_4430sdp_map_io(void)
+{
+	omap2_set_globals_443x();
+	omap2_map_common_io();
+}
+
+MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
+	/* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap_4430sdp_map_io,
+	.init_irq	= omap_4430sdp_init_irq,
+	.init_machine	= omap_4430sdp_init,
+	.timer		= &omap_timer,
+MACHINE_END
arch/arm/plat-omap/include/mach/hardware.h +1 -0
index 3dc423e..26c1fbf 100644
@@ -285,5 +285,6 @@
 #include "omap16xx.h"
 #include "omap24xx.h"
 #include "omap34xx.h"
+#include "omap44xx.h"
 
 #endif	/* __ASM_ARCH_OMAP_HARDWARE_H */
arch/arm/plat-omap/include/mach/omap34xx.h +5 -5
index ab64015..4cf9859 100644
@@ -3,7 +3,7 @@
  *
  * This file contains the processor specific definitions of the TI OMAP34XX.
  *
- * Copyright (C) 2007 Texas Instruments.
+ * Copyright (C) 2007-2009 Texas Instruments.
  * Copyright (C) 2007 Nokia Corporation.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -31,13 +31,9 @@
 
 #define L4_34XX_BASE		0x48000000
 #define L4_WK_34XX_BASE		0x48300000
-#define L4_WK_OMAP_BASE		L4_WK_34XX_BASE
 #define L4_PER_34XX_BASE	0x49000000
-#define L4_PER_OMAP_BASE	L4_PER_34XX_BASE
 #define L4_EMU_34XX_BASE	0x54000000
-#define L4_EMU_BASE		L4_EMU_34XX_BASE
 #define L3_34XX_BASE		0x68000000
-#define L3_OMAP_BASE		L3_34XX_BASE
 
 #define OMAP3430_32KSYNCT_BASE	0x48320000
 #define OMAP3430_CM_BASE	0x48004800
@@ -85,6 +81,10 @@
 
 #if defined(CONFIG_ARCH_OMAP3430)
 
+#define L4_WK_OMAP_BASE			L4_WK_34XX_BASE
+#define L4_PER_OMAP_BASE		L4_PER_34XX_BASE
+#define L4_EMU_BASE			L4_EMU_34XX_BASE
+#define L3_OMAP_BASE			L3_34XX_BASE
 #define OMAP2_32KSYNCT_BASE		OMAP3430_32KSYNCT_BASE
 #define OMAP2_CM_BASE			OMAP3430_CM_BASE
 #define OMAP2_PRM_BASE			OMAP3430_PRM_BASE
arch/arm/plat-omap/include/mach/omap44xx.h new file +61 -0

61 lines not on this page · raw message

Signature · 1 line
1.5.4.7
maintainer
#1 lore raw

Re: [PATCH 2/7] OMAP4: Create board support for OMAP_4430SDP, v3

Hi,

I rebased these patches on top of the for-next branch in linux-omap tree, some comments and the updated patch below.

Quoted 8 lines · Santosh Shilimkar

(patch is rebased on 2.6.30-rc6. The older version was based on 2.6.30-rc2)

This patch creates the bare minimal board files to support OMAP_4430SDP. Additinaly new omap44xx.h is created which contains the base addresses for OMAP4430. File omap34xx.h is adapted to avoid multiple definitions of common omap base address definitions.

Quoted 8 lines
---
 arch/arm/mach-omap2/board-4430sdp.c        |   94 ++++++++++++++++++++++++++++
 arch/arm/plat-omap/include/mach/hardware.h |    1 +
 arch/arm/plat-omap/include/mach/omap34xx.h |   10 ++--
 arch/arm/plat-omap/include/mach/omap44xx.h |   61 ++++++++++++++++++
 4 files changed, 161 insertions(+), 5 deletions(-)
 create mode 100644 arch/arm/mach-omap2/board-4430sdp.c
 create mode 100644 arch/arm/plat-omap/include/mach/omap44xx.h

In general, considering this whole series is less than 750 lines of changes, I suggest collapsing them into following three patches:

1. Add minimal support for omap4

This patch would be everything in your series, except what's in patches two and three below.

2. Add support for 4430 SDP

This patch would be just the board-4430sdp.c the changes to mach-omap2/Makefile and mach-omap2/Kconfig.

3. Add defconfig for 4430 SDP

This patch would just contain the defconfig.

To make things easy, I rebased two of your patches on top of the for-next branch in the linux-omap tree. Some comments and the updated patch below.

Please do any more changes on top of this version so we can get things queued up nicely for Russell.

Quoted 28 lines
arch/arm/plat-omap/include/mach/omap34xx.h +1 -5
index ab64015..4cf9859 100644
@@ -3,7 +3,7 @@
  *
  * This file contains the processor specific definitions of the TI OMAP34XX.
  *
- * Copyright (C) 2007 Texas Instruments.
+ * Copyright (C) 2007-2009 Texas Instruments.
  * Copyright (C) 2007 Nokia Corporation.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -31,13 +31,9 @@
 
 #define L4_34XX_BASE		0x48000000
 #define L4_WK_34XX_BASE		0x48300000
-#define L4_WK_OMAP_BASE		L4_WK_34XX_BASE
 #define L4_PER_34XX_BASE	0x49000000
-#define L4_PER_OMAP_BASE	L4_PER_34XX_BASE
 #define L4_EMU_34XX_BASE	0x54000000
-#define L4_EMU_BASE		L4_EMU_34XX_BASE
 #define L3_34XX_BASE		0x68000000
-#define L3_OMAP_BASE		L3_34XX_BASE
 
 #define OMAP3430_32KSYNCT_BASE	0x48320000
 #define OMAP3430_CM_BASE	0x48004800

arch/arm/plat-omap/include/mach/omap34xx.h line 90

Quoted 10 lines
arch/arm/plat-omap/include/mach/omap34xx.h +4 -0
@@ -85,6 +81,10 @@
 
 #if defined(CONFIG_ARCH_OMAP3430)
 
+#define L4_WK_OMAP_BASE			L4_WK_34XX_BASE
+#define L4_PER_OMAP_BASE		L4_PER_34XX_BASE
+#define L4_EMU_BASE			L4_EMU_34XX_BASE
+#define L3_OMAP_BASE			L3_34XX_BASE
 #define OMAP2_32KSYNCT_BASE		OMAP3430_32KSYNCT_BASE
 #define OMAP2_CM_BASE			OMAP3430_CM_BASE
 #define OMAP2_PRM_BASE			OMAP3430_PRM_BASE

The part above can be left out now when rebased on top of the earlier header clean-up.

Quoted 12 lines
arch/arm/plat-omap/include/mach/omap44xx.h new file +6 -0
new file mode 100644
index 0000000..fce4126
 
+
+/* Common macros between OMAPs */
+
+#if defined(CONFIG_ARCH_OMAP4)
+
+#define L4_WK_OMAP_BASE			L4_WK_44XX_BASE

arch/arm/plat-omap/include/mach/omap44xx.h

Quoted 10 lines
arch/arm/plat-omap/include/mach/omap44xx.h new file +10 -0
+#define L4_PER_OMAP_BASE		L4_PER_44XX_BASE
+#define L4_EMU_BASE			L4_EMU_44XX_BASE
+#define L3_OMAP_BASE			L3_44XX_BASE
+#define OMAP2_32KSYNCT_BASE		OMAP4430_32KSYNCT_BASE
+#define OMAP2_CM_BASE			OMAP4430_CM_BASE
+#define OMAP2_PRM_BASE			OMAP4430_PRM_BASE
+#define OMAP2_VA_IC_BASE		IO_ADDRESS(OMAP44XX_IC_BASE)
+
+#endif
+

And this part too can now be left out. See the related changes to plat-omap/common.c for the timer, I've only compile tested it :)

Regards,

Tony

Quoted 1 line

From b053e3239892fa088339db2eb0f33dbaa803f61d Mon Sep 17 00:00:00 2001

From: Santosh Shilimkar <[email protected]>
Date: Tue, 19 May 2009 13:51:45 -0700
Subject: [PATCH] ARM: OMAP4: Create board support for OMAP_4430SDP, v3

This patch creates the bare minimal board files to support OMAP_4430SDP. Additinaly new omap44xx.h is created which contains the base addresses for OMAP4430. File omap34xx.h is adapted to avoid multiple definitions of common omap base address definitions.

arch/arm/mach-omap2/board-4430sdp.c new file +94 -0
new file mode 100644
index 0000000..57e477b
@@ -0,0 +1,94 @@
+/*
+ * Board support file for OMAP4430 SDP.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * Author: Santosh Shilimkar <[email protected]>
+ *
+ * Based on mach-omap2/board-3430sdp.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/control.h>
+#include <mach/timer-gp.h>
+#include <asm/hardware/gic.h>
+
+static struct platform_device sdp4430_lcd_device = {
+	.name		= "sdp4430_lcd",
+	.id		= -1,
+};
+
+static struct platform_device *sdp4430_devices[] __initdata = {
+	&sdp4430_lcd_device,
+};
+
+static struct omap_uart_config sdp4430_uart_config __initdata = {
+	.enabled_uarts	= (1 << 0) | (1 << 1) | (1 << 2),
+};
+
+static struct omap_lcd_config sdp4430_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static struct omap_board_config_kernel sdp4430_config[] __initdata = {
+	{ OMAP_TAG_UART,	&sdp4430_uart_config },
+	{ OMAP_TAG_LCD,		&sdp4430_lcd_config },
+};
+
+static void __init gic_init_irq(void)
+{
+	gic_dist_init(0, IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29);
+	gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
+}
+
+static void __init omap_4430sdp_init_irq(void)
+{
+	omap2_init_common_hw(NULL);
+#ifdef CONFIG_OMAP_32K_TIMER
+	omap2_gp_clockevent_set_gptimer(1);
+#endif
+	gic_init_irq();
+	omap_gpio_init();
+}
+
+
+static void __init omap_4430sdp_init(void)
+{
+	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
+	omap_board_config = sdp4430_config;
+	omap_board_config_size = ARRAY_SIZE(sdp4430_config);
+	omap_serial_init();
+}
+
+static void __init omap_4430sdp_map_io(void)
+{
+	omap2_set_globals_443x();
+	omap2_map_common_io();
+}
+
+MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
+	/* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap_4430sdp_map_io,
+	.init_irq	= omap_4430sdp_init_irq,
+	.init_machine	= omap_4430sdp_init,
+	.timer		= &omap_timer,
+MACHINE_END
arch/arm/plat-omap/common.c +11 -0
index 70b68ef..febcacf 100644
@@ -217,6 +217,15 @@ static cycle_t omap34xx_32k_read(struct clocksource *cs)
 #define omap34xx_32k_read	NULL
 #endif
 
+#ifdef CONFIG_ARCH_OMAP4
+static cycle_t omap44xx_32k_read(struct clocksource *cs)
+{
+	return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10);
+}
+#else
+#define omap44xx_32k_read	NULL
+#endif
+
 /*
  * Kernel assumes that sched_clock can be called early but may not have
  * things ready yet.
@@ -264,6 +273,8 @@ static int __init omap_init_clocksource_32k(void)
 			clocksource_32k.read = omap2430_32k_read;
 		else if (cpu_is_omap34xx())
 			clocksource_32k.read = omap34xx_32k_read;
+		else if (cpu_is_omap44xx())
+			clocksource_32k.read = omap44xx_32k_read;
 		else
 			return -ENODEV;
 
arch/arm/plat-omap/include/mach/hardware.h +1 -0
index 3dc423e..26c1fbf 100644
@@ -285,5 +285,6 @@
 #include "omap16xx.h"
 #include "omap24xx.h"
 #include "omap34xx.h"
+#include "omap44xx.h"
 
 #endif	/* __ASM_ARCH_OMAP_HARDWARE_H */
arch/arm/plat-omap/include/mach/omap34xx.h +1 -1
index f8d186a..9bab0a8 100644
@@ -3,7 +3,7 @@
  *
  * This file contains the processor specific definitions of the TI OMAP34XX.
  *
- * Copyright (C) 2007 Texas Instruments.
+ * Copyright (C) 2007-2009 Texas Instruments.
  * Copyright (C) 2007 Nokia Corporation.
  *
  * This program is free software; you can redistribute it and/or modify
arch/arm/plat-omap/include/mach/omap44xx.h new file +46 -0

46 lines not on this page · raw message

maintainer
#2 lore raw

PATCH 1/1 ARM: OMAP2/3: Remove unused L4_WK_OMAP_BASE, L4_PER_OMAP_BASE, L4_EMU_BASE, L3_OMAP_BASE (Re: [PATCH 2/7] OMAP4: Create board support for OMAP_4430SDP, v3)

Quoted 4 lines · Tony Lindgren

Hi,

I rebased these patches on top of the for-next branch in linux-omap tree, some comments and the updated patch below.

We can now get rid of these old defines too BTW.

Tony

Quoted 1 line

From a64bb3a0bf0128ee4ae1d540c7482c186aff326b Mon Sep 17 00:00:00 2001

From: Tony Lindgren <[email protected]>
Date: Tue, 19 May 2009 13:51:44 -0700
Subject: [PATCH] ARM: OMAP2/3: Remove unused L4_WK_OMAP_BASE, L4_PER_OMAP_BASE, L4_EMU_BASE, L3_OMAP_BASE

These are not being used right now, and the processor specific defines should be used instead by any code accessing these registers.

arch/arm/plat-omap/include/mach/omap34xx.h +0 -4
index cc25733..f8d186a 100644
@@ -31,13 +31,9 @@
 
 #define L4_34XX_BASE		0x48000000
 #define L4_WK_34XX_BASE		0x48300000
-#define L4_WK_OMAP_BASE		L4_WK_34XX_BASE
 #define L4_PER_34XX_BASE	0x49000000
-#define L4_PER_OMAP_BASE	L4_PER_34XX_BASE
 #define L4_EMU_34XX_BASE	0x54000000
-#define L4_EMU_BASE		L4_EMU_34XX_BASE
 #define L3_34XX_BASE		0x68000000
-#define L3_OMAP_BASE		L3_34XX_BASE
 
 #define OMAP3430_32KSYNCT_BASE	0x48320000
 #define OMAP3430_CM_BASE	0x48004800
#3 lore raw

RE: [PATCH 2/7] OMAP4: Create board support for OMAP_4430SDP, v3

In reply to Tony Lindgren
Quoted 55 lines

-----Original Message-----
From: Tony Lindgren [mailto:[email protected]]
Sent: Wednesday, May 20, 2009 2:48 AM
To: Shilimkar, Santosh
Cc: [email protected]; [email protected]
Subject: Re: [PATCH 2/7] OMAP4: Create board support for OMAP_4430SDP, v3

Hi,

I rebased these patches on top of the for-next branch in linux-omap tree, some comments and the updated patch below.

Quoted 1 line · Santosh Shilimkar

(patch is rebased on 2.6.30-rc6. The older version was

based on 2.6.30-rc2)

Quoted 9 lines

This patch creates the bare minimal board files to support OMAP_4430SDP. Additinaly new omap44xx.h is created which contains the base addresses for OMAP4430. File omap34xx.h is adapted to avoid multiple definitions of common omap base address definitions.

---
 arch/arm/mach-omap2/board-4430sdp.c        |   94 

++++++++++++++++++++++++++++

Quoted 3 lines
 arch/arm/plat-omap/include/mach/hardware.h |    1 +
 arch/arm/plat-omap/include/mach/omap34xx.h |   10 ++--
 arch/arm/plat-omap/include/mach/omap44xx.h |   61 

++++++++++++++++++

Quoted 3 lines
 4 files changed, 161 insertions(+), 5 deletions(-)
 create mode 100644 arch/arm/mach-omap2/board-4430sdp.c
 create mode 100644 arch/arm/plat-omap/include/mach/omap44xx.h

In general, considering this whole series is less than 750 lines of changes,
I suggest collapsing them into following three patches:

1. Add minimal support for omap4

This patch would be everything in your series, except what's in patches
two and three below.

2. Add support for 4430 SDP

This patch would be just the board-4430sdp.c the changes to mach-omap2/Makefile
and mach-omap2/Kconfig.

3. Add defconfig for 4430 SDP

This patch would just contain the defconfig.

Quoted 7 lines

To make things easy, I rebased two of your patches on top of the for-next
branch in the linux-omap tree. Some comments and the updated patch below.

Please do any more changes on top of this version so we can get things queued up nicely for Russell.

Cool :)
I am fine with merging the patches but the clock stub patch should be kept separate. This patch should be reverted once clkdev is ready and in that case it would be easy to remove it. Series would be like this
1. Add minimal support for omap4
2. Add support for 4430 SDP
3. Clock stubs
4. Add defconfig for 4430 SDP

I will rebase on 'for-next branch' on linux-omap and test it.

maintainer
#4 lore raw

Re: [PATCH 2/7] OMAP4: Create board support for OMAP_4430SDP, v3

Quoted 71 lines · Shilimkar, Santosh
Quoted 55 lines

-----Original Message-----
From: Tony Lindgren [mailto:[email protected]]
Sent: Wednesday, May 20, 2009 2:48 AM
To: Shilimkar, Santosh
Cc: [email protected]; [email protected]
Subject: Re: [PATCH 2/7] OMAP4: Create board support for OMAP_4430SDP, v3

Hi,

I rebased these patches on top of the for-next branch in linux-omap tree, some comments and the updated patch below.

Quoted 1 line · Santosh Shilimkar

(patch is rebased on 2.6.30-rc6. The older version was

based on 2.6.30-rc2)

Quoted 9 lines

This patch creates the bare minimal board files to support OMAP_4430SDP. Additinaly new omap44xx.h is created which contains the base addresses for OMAP4430. File omap34xx.h is adapted to avoid multiple definitions of common omap base address definitions.

---
 arch/arm/mach-omap2/board-4430sdp.c        |   94 

++++++++++++++++++++++++++++

Quoted 3 lines
 arch/arm/plat-omap/include/mach/hardware.h |    1 +
 arch/arm/plat-omap/include/mach/omap34xx.h |   10 ++--
 arch/arm/plat-omap/include/mach/omap44xx.h |   61 

++++++++++++++++++

Quoted 3 lines
 4 files changed, 161 insertions(+), 5 deletions(-)
 create mode 100644 arch/arm/mach-omap2/board-4430sdp.c
 create mode 100644 arch/arm/plat-omap/include/mach/omap44xx.h

In general, considering this whole series is less than 750 lines of changes,
I suggest collapsing them into following three patches:

1. Add minimal support for omap4

This patch would be everything in your series, except what's in patches
two and three below.

2. Add support for 4430 SDP

This patch would be just the board-4430sdp.c the changes to mach-omap2/Makefile
and mach-omap2/Kconfig.

3. Add defconfig for 4430 SDP

This patch would just contain the defconfig.

Quoted 7 lines

To make things easy, I rebased two of your patches on top of the for-next
branch in the linux-omap tree. Some comments and the updated patch below.

Please do any more changes on top of this version so we can get things queued up nicely for Russell.

Cool :)
I am fine with merging the patches but the clock stub patch should be kept separate. This patch should be reverted once clkdev is ready and in that case it would be easy to remove it. Series would be like this
1. Add minimal support for omap4
2. Add support for 4430 SDP
3. Clock stubs
4. Add defconfig for 4430 SDP

Quoted 1 line

I will rebase on 'for-next branch' on linux-omap and test it.

OK, sounds good to me!

Tony