Change order for FM tune.
PATCH 1/1 Change order for FM tune.
Hi All.
Change order data of buffer in FM simple_tune function. It is usefull for:
1. Set data of tuner with CP bit UP. 0xCE for MK5 or 0xC6 for MK3
2. When call simple_fm_tune, read this byte from config and overwrite this byte in function simple_radio_bandswitch for set CP bit to OFF.
Of course it can be usefull for other tuner for overwrite default settings of FM.
linux/drivers/media/common/tuners/tuner-simple.c +3 -3
@@ -698,11 +698,11 @@return 0 ; } + buffer[2 ] = (t_params->ranges[0 ].config & ~TUNER_RATIO_MASK ) | +TUNER_RATIO_SELECT_50 ;/* 50 kHz step */ +/* Bandswitch byte */ simple_radio_bandswitch (fe, &buffer[0 ]); - - buffer[2 ] = (t_params->ranges[0 ].config & ~TUNER_RATIO_MASK ) | -TUNER_RATIO_SELECT_50 ;/* 50 kHz step */ /* Convert from 1/16 kHz V4L steps to 1/20 MHz (=50 kHz) PLL steps freq * (1 Mhz / 16000 V4L steps) * (20 PLL steps / 1 MHz) =
Signed-off-by Beholder Intl. Ltd. Dmitry Belimov <[email protected]>
With my best regards, Dmitry.
linux/drivers/media/common/tuners/tuner-simple.c +3 -3
@@ -698,11 +698,11 @@return 0 ; } + buffer[2 ] = (t_params->ranges[0 ].config & ~TUNER_RATIO_MASK ) | +TUNER_RATIO_SELECT_50 ;/* 50 kHz step */ +/* Bandswitch byte */ simple_radio_bandswitch (fe, &buffer[0 ]); - - buffer[2 ] = (t_params->ranges[0 ].config & ~TUNER_RATIO_MASK ) | -TUNER_RATIO_SELECT_50 ;/* 50 kHz step */ /* Convert from 1/16 kHz V4L steps to 1/20 MHz (=50 kHz) PLL steps freq * (1 Mhz / 16000 V4L steps) * (20 PLL steps / 1 MHz) =
Signed-off-by Beholder Intl. Ltd. Dmitry Belimov <[email protected]>