One question about perf_counter on IA
I noticed that the LVT error register is masked and then unmasked during perf_counter initialization on IA in arch/x86/kernel/cpu/perf_counter.c
void perf_counters_lapic_init(int nmi)
{
u32 apic_val;
if (!x86_pmu_initialized())
return;
/*
* Enable the performance counter vector in the APIC LVT:
*/
apic_val = apic_read(APIC_LVTERR);
apic_write(APIC_LVTERR, apic_val | APIC_LVT_MASKED);
if (nmi)
apic_write(APIC_LVTPC, APIC_DM_NMI);
else
apic_write(APIC_LVTPC, LOCAL_PERF_VECTOR);
apic_write(APIC_LVTERR, apic_val);
}Why is this needed? Is this documented somewhere in the spec? I tried commenting out the masking and unmasking operations and I did not any error interrupt generated.
Thanks
-Yong
Quoted 24 lines · Yong Wang
I noticed that the LVT error register is masked and then unmasked during
perf_counterinitialization on IA inarch/x86/kernel/cpu/perf_counter.cvoid
perf_counters_lapic_init(int nmi){ u32 apic_val; if (!x86_pmu_initialized()) return; /* * Enable the performance counter vector in the APIC LVT: */ apic_val = apic_read(APIC_LVTERR); apic_write(APIC_LVTERR, apic_val | APIC_LVT_MASKED); if (nmi) apic_write(APIC_LVTPC, APIC_DM_NMI); else apic_write(APIC_LVTPC, LOCAL_PERF_VECTOR); apic_write(APIC_LVTERR, apic_val); }
Quoted 3 lines
Why is this needed? Is this documented somewhere in the spec? I tried commenting out the masking and unmasking operations and I did not any error interrupt generated.
i think a spurious error irq can be triggered due to APIC_DM_NMI having zero for the vector bit. If we switch between irq and nmi mode frequently then there could be racy situations.
Not that having an error irq would hurt much ...
Note, in the current code we essentially always use NMI mode, the cleanups just have not propagated through fully yet. Feel free to send a patch for this!
Ingo