sh: add AP325RXA mode pin configuration
PATCH 1/1 sh: add AP325RXA mode pin configuration
From: Magnus Damm <[email protected]>
This patch adds mode pin configuration to ap325rxa.
Signed-off-by Magnus Damm <[email protected]>
---
arch/sh/boards/board-ap325rxa.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
arch/sh/boards/board-ap325rxa.c +12 -0
@@ -535,6 +535,18 @@ static int __init ap325rxa_devices_setup }device_initcall (ap325rxa_devices_setup); +/* Return the board specific boot mode pin configuration */ +static int ap325rxa_mode_pins (void ) +{ +/* MD0=0, MD1=0, MD2=0: Clock Mode 0 +* MD3=0: 16-bit Area0 Bus Width +* MD5=1: Little Endian +* TSTMD=1, MD8=1: Test Mode Disabled +*/ +return MODE_PIN5 |MODE_PIN8 ; +} + static struct sh_machine_vector mv_ap325rxa __initmv = { .mv_name ="AP-325RXA" , + .mv_mode_pins = ap325rxa_mode_pins, };