adb trackpad disappears after suspend to ram
Subsystems (3)
Hi,
On my PowerBook6,5 (iBook G4) the trackpad does not show up on the adb-bus after resuming from suspend to ram. This happens in roughly 50% of the resume cycles.
Affected kernel versions: v2.6.30_rc1 through _rc7
Here is a diff of the output of lshal before and after the trackpad vanished:
lshal-notouchpad.out renamed from lshal-ok.out +2 -17
@@ -1,5 +1,5 @@ -Dumping 81 device(s) from the Global Device List: +Dumping 80 device(s) from the Global Device List: ------------------------------------------------- udi = '/org/freedesktop/Hal/devices/computer' info.addons = {'hald-addon-cpufreq'} (string list)
@@ -95,21 +95,6 @@ linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/virtual/input/input4/event4' (string) -udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' - info.capabilities = {'input', 'input.mouse'} (string list) - info.category = 'input' (string) - info.parent = '/org/freedesktop/Hal/devices/computer' (string) - info.product = 'ADB mouse' (string) - info.subsystem = 'input' (string) - info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' (string) - input.device = '/dev/input/event3' (string) - input.product = 'ADB mouse' (string) - input.x11_driver = 'evdev' (string) - linux.device_file = '/dev/input/event3' (string) - linux.hotplug_type = 2 (0x2) (int) - linux.subsystem = 'input' (string) - linux.sysfs_path = '/sys/devices/virtual/input/input3/event3' (string) - udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'input.keys', 'button'} (string list)
@@ -1820,6 +1805,6 @@ pci.vendor_id = 4203 (0x106b) (int) -Dumped 81 device(s) from the Global Device List. +Dumped 80 device(s) from the Global Device List. ------------------------------------------------
Please let me know if you need more info.
Regards,
Jan Scholz
Quoted 6 lines · Jan Scholz
Hi,
On my PowerBook6,5 (iBook G4) the trackpad does not show up on the adb-bus after resuming from suspend to ram. This happens in roughly 50% of the resume cycles.
Affected kernel versions: v2.6.30_rc1 through_rc7
I bisected the regression and found the first bad commit to be:2ed8d2b3a81bdbb0418301628ccdb008ac9f40b7
"PM: Rework handling of interrupts during suspend-resume"
To those of you I cc'ed: sorry for the noise, but you were the ones that get_maintainers.pl spit out when asking for *adb*-files.
In addition to the diff of the lshal output I posted before, here is the diff in the output of lsadb:
lsadb-notouchpad.out renamed from lsadb-ok.out +0 -11
@@ -1,35 +1,24 @@ Devices connected to the ADB-Bus: (PMU: 12) D R raw data decoded data ------------------------------------------------------------------------------------- 2.3: [62 c4] Encode Device Apple Macintosh PowerBook G3 Keyboard (ISO layout) Exceptional Event enabled Service Request enabled 2: [ff ff] Qualifier: (not all must be supported) Fn-key Delete Caps-Lock Reset Control Shift Option Apple Num-Lock Scroll-Lock Scroll-Lock-LED Caps-Lock-LED Num-Lock-LED 1: [05 01] Special keys need Fn Key 0: - 3.3: [23 04] Relative-Position Device - Extended Mouse Protokoll - Exceptional Event disabled - Service Request enabled - 2: [08 48 03 00 00 00 00 00] - 1: [74 70 61 64 01 90 03 04] Mouse type: tpad - resolution: 400 dpi - Device class: Trackpad - buttons: 4 - 0: - 7.3: [67 1f] Misc. Device Powerbook G3 (Pismo) Button Device Exceptional Event enabled Service Request enabled 2: 1: 0:
Quoted 51 lines
Here is a diff of the output of lshal before and after the trackpad vanished:
lshal-notouchpad.out renamed from lshal-ok.out +2
-17@@ -1,5 +1,5 @@ -Dumping 81 device(s) from the Global Device List: +Dumping 80 device(s) from the Global Device List: ------------------------------------------------- udi = '/org/freedesktop/Hal/devices/computer' info.addons = {'hald-addon-cpufreq'} (string list)@@ -95,21 +95,6 @@ linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/virtual/input/input4/event4' (string) -udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' - info.capabilities = {'input', 'input.mouse'} (string list) - info.category = 'input' (string) - info.parent = '/org/freedesktop/Hal/devices/computer' (string) - info.product = 'ADB mouse' (string) - info.subsystem = 'input' (string) - info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' (string) - input.device = '/dev/input/event3' (string) - input.product = 'ADB mouse' (string) - input.x11_driver = 'evdev' (string) - linux.device_file = '/dev/input/event3' (string) - linux.hotplug_type = 2 (0x2) (int) - linux.subsystem = 'input' (string) - linux.sysfs_path = '/sys/devices/virtual/input/input3/event3' (string) - udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'input.keys', 'button'} (string list)@@ -1820,6 +1805,6 @@ pci.vendor_id = 4203 (0x106b) (int) -Dumped 81 device(s) from the Global Device List. +Dumped 80 device(s) from the Global Device List. ------------------------------------------------Please let me know if you need more info.
Regards,
Jan Scholz
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Signature · 7 lines
Jan Scholz ____ ____ __ ___
( ___)(_ _) /__\ / __)
Frankfurt Institute for Advanced Studies )__) _)(_ /(__)\ \__ \
(__) (____)(__)(__)(___/
Goethe Universitaet Frankfurt
Ruth-Moufang-Str. 1 Tel. 069-798-47534
60438 Frankfurt am MainQuoted 4 lines · Jan Scholz
Quoted 2 lines · Jan Scholz
Hi,
Quoted 8 lines
Quoted 4 lines
On my PowerBook6,5 (iBook G4) the trackpad does not show up on the adb-bus after resuming from suspend to ram. This happens in roughly 50% of the resume cycles.
Affected kernel versions: v2.6.30_rc1 through_rc7I bisected the regression and found the first bad commit to be:
2ed8d2b3a81bdbb0418301628ccdb008ac9f40b7
"PM: Rework handling of interrupts during suspend-resume"
Thanks for bisecting.
We are too late in the cycle to revert this commit and it really is needed to fix a more serious issue. Nevertheless knowing that it caused the problem to appear on your system is also important.
Ben, do you have an idea what may be going on here? Does __disable_irq() mask the interrupt on this platform?
Quoted 82 lines
To those of you I cc'ed: sorry for the noise, but you were the ones that get_maintainers.pl spit out when asking for *adb*-files.
In addition to the diff of the lshal output I posted before, here is the diff in the output of lsadb:
lsadb-notouchpad.out renamed from lsadb-ok.out +0
-11@@ -1,35 +1,24 @@ Devices connected to the ADB-Bus: (PMU: 12) D R raw data decoded data ------------------------------------------------------------------------------------- 2.3: [62 c4] Encode Device Apple Macintosh PowerBook G3 Keyboard (ISO layout) Exceptional Event enabled Service Request enabled 2: [ff ff] Qualifier: (not all must be supported) Fn-key Delete Caps-Lock Reset Control Shift Option Apple Num-Lock Scroll-Lock Scroll-Lock-LED Caps-Lock-LED Num-Lock-LED 1: [05 01] Special keys need Fn Key 0: - 3.3: [23 04] Relative-Position Device - Extended Mouse Protokoll - Exceptional Event disabled - Service Request enabled - 2: [08 48 03 00 00 00 00 00] - 1: [74 70 61 64 01 90 03 04] Mouse type: tpad - resolution: 400 dpi - Device class: Trackpad - buttons: 4 - 0: - 7.3: [67 1f] Misc. Device Powerbook G3 (Pismo) Button Device Exceptional Event enabled Service Request enabled 2: 1: 0:Quoted 38 lines
Here is a diff of the output of lshal before and after the trackpad vanished:
lshal-notouchpad.out renamed from lshal-ok.out +1
-16@@ -1,5 +1,5 @@ -Dumping 81 device(s) from the Global Device List: +Dumping 80 device(s) from the Global Device List: ------------------------------------------------- udi = '/org/freedesktop/Hal/devices/computer' info.addons = {'hald-addon-cpufreq'} (string list)@@ -95,21 +95,6 @@ linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/virtual/input/input4/event4' (string) -udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' - info.capabilities = {'input', 'input.mouse'} (string list) - info.category = 'input' (string) - info.parent = '/org/freedesktop/Hal/devices/computer' (string) - info.product = 'ADB mouse' (string) - info.subsystem = 'input' (string) - info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' (string) - input.device = '/dev/input/event3' (string) - input.product = 'ADB mouse' (string) - input.x11_driver = 'evdev' (string) - linux.device_file = '/dev/input/event3' (string) - linux.hotplug_type = 2 (0x2) (int) - linux.subsystem = 'input' (string) - linux.sysfs_path = '/sys/devices/virtual/input/input3/event3' (string) - udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'input.keys', 'button'} (string list)@@ -1820,6 +1805,6 @@ pci.vendor_id = 4203 (0x106b) (int)
Quoted 5 lines
Quoted 5 lines
lshal-notouchpad.out renamed from lshal-ok.out +1
-1-Dumped 81 device(s) from the Global Device List. +Dumped 80 device(s) from the Global Device List. ------------------------------------------------Please let me know if you need more info.
I'd like to see a boot log, preferably containing a suspend-resume in which the problem was reproduced.
Best,
Rafael
Quoted 4 lines · Jan Scholz
Quoted 2 lines · Jan Scholz
Hi,
Quoted 8 lines
Quoted 4 lines
On my PowerBook6,5 (iBook G4) the trackpad does not show up on the adb-bus after resuming from suspend to ram. This happens in roughly 50% of the resume cycles.
Affected kernel versions: v2.6.30_rc1 through_rc7I bisected the regression and found the first bad commit to be:
2ed8d2b3a81bdbb0418301628ccdb008ac9f40b7
"PM: Rework handling of interrupts during suspend-resume"
Thanks for bisecting.
We are too late in the cycle to revert this commit and it really is needed to fix a more serious issue. Nevertheless knowing that it caused the problem to appear on your system is also important.
Ben, do you have an idea what may be going on here? Does __disable_irq() mask the interrupt on this platform?
Quoted 82 lines
To those of you I cc'ed: sorry for the noise, but you were the ones that get_maintainers.pl spit out when asking for *adb*-files.
In addition to the diff of the lshal output I posted before, here is the diff in the output of lsadb:
lsadb-notouchpad.out renamed from lsadb-ok.out +0
-11@@ -1,35 +1,24 @@ Devices connected to the ADB-Bus: (PMU: 12) D R raw data decoded data ------------------------------------------------------------------------------------- 2.3: [62 c4] Encode Device Apple Macintosh PowerBook G3 Keyboard (ISO layout) Exceptional Event enabled Service Request enabled 2: [ff ff] Qualifier: (not all must be supported) Fn-key Delete Caps-Lock Reset Control Shift Option Apple Num-Lock Scroll-Lock Scroll-Lock-LED Caps-Lock-LED Num-Lock-LED 1: [05 01] Special keys need Fn Key 0: - 3.3: [23 04] Relative-Position Device - Extended Mouse Protokoll - Exceptional Event disabled - Service Request enabled - 2: [08 48 03 00 00 00 00 00] - 1: [74 70 61 64 01 90 03 04] Mouse type: tpad - resolution: 400 dpi - Device class: Trackpad - buttons: 4 - 0: - 7.3: [67 1f] Misc. Device Powerbook G3 (Pismo) Button Device Exceptional Event enabled Service Request enabled 2: 1: 0:Quoted 38 lines
Here is a diff of the output of lshal before and after the trackpad vanished:
lshal-notouchpad.out renamed from lshal-ok.out +1
-16@@ -1,5 +1,5 @@ -Dumping 81 device(s) from the Global Device List: +Dumping 80 device(s) from the Global Device List: ------------------------------------------------- udi = '/org/freedesktop/Hal/devices/computer' info.addons = {'hald-addon-cpufreq'} (string list)@@ -95,21 +95,6 @@ linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/virtual/input/input4/event4' (string) -udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' - info.capabilities = {'input', 'input.mouse'} (string list) - info.category = 'input' (string) - info.parent = '/org/freedesktop/Hal/devices/computer' (string) - info.product = 'ADB mouse' (string) - info.subsystem = 'input' (string) - info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' (string) - input.device = '/dev/input/event3' (string) - input.product = 'ADB mouse' (string) - input.x11_driver = 'evdev' (string) - linux.device_file = '/dev/input/event3' (string) - linux.hotplug_type = 2 (0x2) (int) - linux.subsystem = 'input' (string) - linux.sysfs_path = '/sys/devices/virtual/input/input3/event3' (string) - udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'input.keys', 'button'} (string list)@@ -1820,6 +1805,6 @@ pci.vendor_id = 4203 (0x106b) (int)
Quoted 5 lines
Quoted 5 lines
lshal-notouchpad.out renamed from lshal-ok.out +1
-1-Dumped 81 device(s) from the Global Device List. +Dumped 80 device(s) from the Global Device List. ------------------------------------------------Please let me know if you need more info.
I'd like to see a boot log, preferably containing a suspend-resume in which the problem was reproduced.
Best,
Rafael
Quoted 7 lines
We are too late in the cycle to revert this commit and it really is needed to fix a more serious issue. Nevertheless knowing that it caused the problem to appear on your system is also important.
Ben, do you have an idea what may be going on here? Does
__disable_irq()mask the interrupt on this platform?
I suppose so :-) I'll have to check what's going on, it's not immediately clear to me.
Cheers,
Ben.
Quoted 93 lines
Quoted 82 lines
To those of you I cc'ed: sorry for the noise, but you were the ones that get_maintainers.pl spit out when asking for *adb*-files.
In addition to the diff of the lshal output I posted before, here is the diff in the output of lsadb:
lsadb-notouchpad.out renamed from lsadb-ok.out +0
-11@@ -1,35 +1,24 @@ Devices connected to the ADB-Bus: (PMU: 12) D R raw data decoded data ------------------------------------------------------------------------------------- 2.3: [62 c4] Encode Device Apple Macintosh PowerBook G3 Keyboard (ISO layout) Exceptional Event enabled Service Request enabled 2: [ff ff] Qualifier: (not all must be supported) Fn-key Delete Caps-Lock Reset Control Shift Option Apple Num-Lock Scroll-Lock Scroll-Lock-LED Caps-Lock-LED Num-Lock-LED 1: [05 01] Special keys need Fn Key 0: - 3.3: [23 04] Relative-Position Device - Extended Mouse Protokoll - Exceptional Event disabled - Service Request enabled - 2: [08 48 03 00 00 00 00 00] - 1: [74 70 61 64 01 90 03 04] Mouse type: tpad - resolution: 400 dpi - Device class: Trackpad - buttons: 4 - 0: - 7.3: [67 1f] Misc. Device Powerbook G3 (Pismo) Button Device Exceptional Event enabled Service Request enabled 2: 1: 0:Quoted 38 lines
Here is a diff of the output of lshal before and after the trackpad vanished:
lshal-notouchpad.out renamed from lshal-ok.out +1
-16@@ -1,5 +1,5 @@ -Dumping 81 device(s) from the Global Device List: +Dumping 80 device(s) from the Global Device List: ------------------------------------------------- udi = '/org/freedesktop/Hal/devices/computer' info.addons = {'hald-addon-cpufreq'} (string list)@@ -95,21 +95,6 @@ linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/virtual/input/input4/event4' (string) -udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' - info.capabilities = {'input', 'input.mouse'} (string list) - info.category = 'input' (string) - info.parent = '/org/freedesktop/Hal/devices/computer' (string) - info.product = 'ADB mouse' (string) - info.subsystem = 'input' (string) - info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' (string) - input.device = '/dev/input/event3' (string) - input.product = 'ADB mouse' (string) - input.x11_driver = 'evdev' (string) - linux.device_file = '/dev/input/event3' (string) - linux.hotplug_type = 2 (0x2) (int) - linux.subsystem = 'input' (string) - linux.sysfs_path = '/sys/devices/virtual/input/input3/event3' (string) - udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'input.keys', 'button'} (string list)@@ -1820,6 +1805,6 @@ pci.vendor_id = 4203 (0x106b) (int)Quoted 5 lines
Quoted 5 lines
lshal-notouchpad.out renamed from lshal-ok.out +1
-1-Dumped 81 device(s) from the Global Device List. +Dumped 80 device(s) from the Global Device List. ------------------------------------------------Please let me know if you need more info.
I'd like to see a boot log, preferably containing a suspend-resume in which the problem was reproduced.
Best,
Rafael
Quoted 7 lines
We are too late in the cycle to revert this commit and it really is needed to fix a more serious issue. Nevertheless knowing that it caused the problem to appear on your system is also important.
Ben, do you have an idea what may be going on here? Does
__disable_irq()mask the interrupt on this platform?
I suppose so :-) I'll have to check what's going on, it's not immediately clear to me.
Cheers,
Ben.
Quoted 93 lines
Quoted 82 lines
To those of you I cc'ed: sorry for the noise, but you were the ones that get_maintainers.pl spit out when asking for *adb*-files.
In addition to the diff of the lshal output I posted before, here is the diff in the output of lsadb:
lsadb-notouchpad.out renamed from lsadb-ok.out +0
-11@@ -1,35 +1,24 @@ Devices connected to the ADB-Bus: (PMU: 12) D R raw data decoded data ------------------------------------------------------------------------------------- 2.3: [62 c4] Encode Device Apple Macintosh PowerBook G3 Keyboard (ISO layout) Exceptional Event enabled Service Request enabled 2: [ff ff] Qualifier: (not all must be supported) Fn-key Delete Caps-Lock Reset Control Shift Option Apple Num-Lock Scroll-Lock Scroll-Lock-LED Caps-Lock-LED Num-Lock-LED 1: [05 01] Special keys need Fn Key 0: - 3.3: [23 04] Relative-Position Device - Extended Mouse Protokoll - Exceptional Event disabled - Service Request enabled - 2: [08 48 03 00 00 00 00 00] - 1: [74 70 61 64 01 90 03 04] Mouse type: tpad - resolution: 400 dpi - Device class: Trackpad - buttons: 4 - 0: - 7.3: [67 1f] Misc. Device Powerbook G3 (Pismo) Button Device Exceptional Event enabled Service Request enabled 2: 1: 0:Quoted 38 lines
Here is a diff of the output of lshal before and after the trackpad vanished:
lshal-notouchpad.out renamed from lshal-ok.out +1
-16@@ -1,5 +1,5 @@ -Dumping 81 device(s) from the Global Device List: +Dumping 80 device(s) from the Global Device List: ------------------------------------------------- udi = '/org/freedesktop/Hal/devices/computer' info.addons = {'hald-addon-cpufreq'} (string list)@@ -95,21 +95,6 @@ linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/virtual/input/input4/event4' (string) -udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' - info.capabilities = {'input', 'input.mouse'} (string list) - info.category = 'input' (string) - info.parent = '/org/freedesktop/Hal/devices/computer' (string) - info.product = 'ADB mouse' (string) - info.subsystem = 'input' (string) - info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' (string) - input.device = '/dev/input/event3' (string) - input.product = 'ADB mouse' (string) - input.x11_driver = 'evdev' (string) - linux.device_file = '/dev/input/event3' (string) - linux.hotplug_type = 2 (0x2) (int) - linux.subsystem = 'input' (string) - linux.sysfs_path = '/sys/devices/virtual/input/input3/event3' (string) - udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'input.keys', 'button'} (string list)@@ -1820,6 +1805,6 @@ pci.vendor_id = 4203 (0x106b) (int)Quoted 5 lines
Quoted 5 lines
lshal-notouchpad.out renamed from lshal-ok.out +1
-1-Dumped 81 device(s) from the Global Device List. +Dumped 80 device(s) from the Global Device List. ------------------------------------------------Please let me know if you need more info.
I'd like to see a boot log, preferably containing a suspend-resume in which the problem was reproduced.
Best,
Rafael
Quoted 4 lines · Benjamin Herrenschmidt
Quoted 4 lines
We are too late in the cycle to revert this commit and it really is needed to fix a more serious issue. Nevertheless knowing that it caused the problem to appear on your system is also important.
Quoted 12 lines
Quoted 2 lines
Ben, do you have an idea what may be going on here? Does
__disable_irq()mask the interrupt on this platform?I suppose so :-) I'll have to check what's going on, it's not immediately clear to me.
Cheers,
Ben.Quoted 3 lines
I'd like to see a boot log, preferably containing a suspend-resume in which the problem was reproduced.
Here is a log from booting, through several suspend cycles, until the trackpad disappeared. The first few suspends were done while X was running but from the console. As you can tell from lines like
May 28 23:51:26 [kernel] adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f the trackpad was still present. The last suspend was done from within X, here the trackpad did not make it. May 28 23:58:09 [kernel] adb devices: [2]: 2 c4 [7]: 7 1f
However, there have been cases, although not in this log, were the trackpad has been alive even when suspending from within X.
Here's the log:
May 28 23:51:25 [kernel] nvram: XP partition at 0x1020
May 28 23:51:26 [kernel] nvram: NR partition at 0x1120
May 28 23:51:26 [kernel] Top of RAM: 0x50000000, Total RAM: 0x50000000
May 28 23:51:26 [kernel] Memory hole size: 0MB
May 28 23:51:26 [kernel] Zone PFN ranges:
May 28 23:51:26 [kernel] DMA 0x00000000 -> 0x00030000
May 28 23:51:26 [kernel] Normal 0x00030000 -> 0x00030000
May 28 23:51:26 [kernel] HighMem 0x00030000 -> 0x00050000
May 28 23:51:26 [kernel] Movable zone start PFN for each node
May 28 23:51:26 [kernel] early_node_map[1] active PFN ranges
May 28 23:51:26 [kernel] 0: 0x00000000 -> 0x00050000
May 28 23:51:26 [kernel] On node 0 totalpages: 327680
May 28 23:51:26 [kernel] free_area_init_node: node 0, pgdat c03eb2e8, node_mem_map c0425000
May 28 23:51:26 [kernel] DMA zone: 1536 pages used for memmap
May 28 23:51:26 [kernel] DMA zone: 0 pages reserved
May 28 23:51:26 [kernel] DMA zone: 195072 pages, LIFO batch:31
May 28 23:51:26 [kernel] HighMem zone: 1024 pages used for memmap
May 28 23:51:26 [kernel] HighMem zone: 130048 pages, LIFO batch:31
May 28 23:51:26 [kernel] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 325120
May 28 23:51:26 [kernel] Kernel command line: root=/dev/hda7 ro idebus=66
May 28 23:51:26 [kernel] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs
May 28 23:51:26 [kernel] mpic: ISU size: 64, shift: 6, mask: 3f
May 28 23:51:26 [kernel] mpic: Initializing for 64 sources
May 28 23:51:26 [kernel] PID hash table entries: 4096 (order: 12, 16384 bytes)
May 28 23:51:26 [kernel] GMT Delta read from XPRAM: 0 minutes, DST: off
May 28 23:51:26 [kernel] time_init: decrementer frequency = 18.432000 MHz
May 28 23:51:26 [kernel] time_init: processor frequency = 1199.999997 MHz
May 28 23:51:26 [kernel] clocksource: timebase mult[d9038e4] shift[22] registered
May 28 23:51:26 [kernel] clockevent: decrementer mult[4b7] shift[16] cpu[0]
May 28 23:51:26 [kernel] Console: colour dummy device 80x25
May 28 23:51:26 [kernel] console handover: boot [udbg0] -> real [tty0]
May 28 23:51:26 [kernel] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
May 28 23:51:26 [kernel] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
May 28 23:51:26 [kernel] High memory: 524288k
May 28 23:51:26 [kernel] Memory: 1289860k/1310720k available (3860k kernel code, 19728k reserved, 160k data, 135k bss, 188k init)
May 28 23:51:26 [kernel] Calibrating delay loop... 36.32 BogoMIPS (lpj=61312)
May 28 23:51:26 [kernel] Mount-cache hash table entries: 512
May 28 23:51:26 [kernel] device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1"
May 28 23:51:26 [kernel] net_namespace: 936 bytes
May 28 23:51:26 [kernel] NET: Registered protocol family 16
May 28 23:51:26 [kernel] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
May 28 23:51:26 [kernel] channel 0 bus <multibus>
May 28 23:51:26 [kernel] channel 1 bus <multibus>
May 28 23:51:26 [kernel] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
May 28 23:51:26 [kernel] channel 0 bus <multibus>
May 28 23:51:26 [kernel] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c
May 28 23:51:26 [kernel] channel 1 bus <multibus>
May 28 23:51:26 [kernel] channel 2 bus <multibus>
May 28 23:51:26 [kernel] PCI: Probing PCI hardware
May 28 23:51:26 [kernel] pci 0000:00:10.0: reg 10 32bit mmio: [0x98000000-0x9fffffff]
May 28 23:51:26 [kernel] pci 0000:00:10.0: reg 14 io port: [0x400-0x4ff]
May 28 23:51:26 [kernel] pci 0000:00:10.0: reg 18 32bit mmio: [0x90000000-0x9000ffff]
May 28 23:51:26 [kernel] pci 0000:00:10.0: reg 30 32bit mmio: [0x90020000-0x9003ffff]
May 28 23:51:26 [kernel] pci 0000:00:10.0: supports D1 D2
May 28 23:51:26 [kernel] pci 0001:10:12.0: reg 10 32bit mmio: [0x80084000-0x80085fff]
May 28 23:51:26 [kernel] pci 0001:10:12.0: supports D1 D2
May 28 23:51:26 [kernel] pci 0001:10:12.0: PME# supported from D0 D1 D2 D3hot D3cold
May 28 23:51:26 [kernel] pci 0001:10:12.0: PME# disabled
May 28 23:51:26 [kernel] pci 0001:10:17.0: reg 10 32bit mmio: [0x80000000-0x8007ffff]
May 28 23:51:26 [kernel] pci 0001:10:18.0: reg 10 32bit mmio: [0x000000-0x000fff]
May 28 23:51:26 [kernel] pci 0001:10:19.0: reg 10 32bit mmio: [0x000000-0x000fff]
May 28 23:51:26 [kernel] pci 0001:10:1a.0: reg 10 32bit mmio: [0x80083000-0x80083fff]
May 28 23:51:26 [kernel] pci 0001:10:1b.0: reg 10 32bit mmio: [0x80082000-0x80082fff]
May 28 23:51:26 [kernel] pci 0001:10:1b.0: supports D1 D2
May 28 23:51:26 [kernel] pci 0001:10:1b.0: PME# supported from D0 D1 D2 D3hot D3cold
May 28 23:51:26 [kernel] pci 0001:10:1b.0: PME# disabled
May 28 23:51:26 [kernel] pci 0001:10:1b.1: reg 10 32bit mmio: [0x80081000-0x80081fff]
May 28 23:51:26 [kernel] pci 0001:10:1b.1: supports D1 D2
May 28 23:51:26 [kernel] pci 0001:10:1b.1: PME# supported from D0 D1 D2 D3hot D3cold
May 28 23:51:26 [kernel] pci 0001:10:1b.1: PME# disabled
May 28 23:51:26 [kernel] pci 0001:10:1b.2: reg 10 32bit mmio: [0x80080000-0x800800ff]
May 28 23:51:26 [kernel] pci 0001:10:1b.2: supports D1 D2
May 28 23:51:26 [kernel] pci 0001:10:1b.2: PME# supported from D0 D1 D2 D3hot D3cold
May 28 23:51:26 [kernel] pci 0001:10:1b.2: PME# disabled
May 28 23:51:26 [kernel] pci 0002:20:0d.0: reg 10 32bit mmio: [0xf5004000-0xf5007fff]
May 28 23:51:26 [kernel] pci 0002:20:0e.0: reg 10 32bit mmio: [0xf5000000-0xf5000fff]
May 28 23:51:26 [kernel] pci 0002:20:0e.0: supports D1 D2
May 28 23:51:26 [kernel] pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot
May 28 23:51:26 [kernel] pci 0002:20:0e.0: PME# disabled
May 28 23:51:26 [kernel] pci 0002:20:0f.0: reg 10 32bit mmio: [0xf5200000-0xf53fffff]
May 28 23:51:26 [kernel] pci 0002:20:0f.0: reg 30 32bit mmio: [0xf5100000-0xf51fffff]
May 28 23:51:26 [kernel] PCI 0000:00 Cannot reserve Legacy IO [0x802000-0x802fff]
May 28 23:51:26 [kernel] pci_bus 0001:10: resource 0 io: [0x00-0x7fffff]
May 28 23:51:26 [kernel] pci_bus 0001:10: resource 1 mem: [0xf3000000-0xf3ffffff]
May 28 23:51:26 [kernel] pci_bus 0001:10: resource 2 mem: [0x80000000-0x8fffffff]
May 28 23:51:26 [kernel] pci_bus 0002:20: resource 0 io: [0xff7fe000-0xffffdfff]
May 28 23:51:26 [kernel] pci_bus 0002:20: resource 1 mem: [0xf5000000-0xf5ffffff]
May 28 23:51:26 [kernel] bio: create slab <bio-0> at 0
May 28 23:51:26 [kernel] NET: Registered protocol family 2
May 28 23:51:26 [kernel] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
May 28 23:51:26 [kernel] Switched to NOHz mode on CPU #0
May 28 23:51:26 [kernel] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
May 28 23:51:26 [kernel] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
May 28 23:51:26 [kernel] TCP: Hash tables configured (established 131072 bind 65536)
May 28 23:51:26 [kernel] TCP reno registered
May 28 23:51:26 [kernel] NET: Registered protocol family 1
May 28 23:51:26 [kernel] Thermal assist unit not available
May 28 23:51:26 [kernel] setup_kcore: restrict size=3fffffff
May 28 23:51:26 [kernel] Registering PowerMac CPU frequency driver
May 28 23:51:26 [kernel] Low: 599 Mhz, High: 1199 Mhz, Boot: 599 Mhz
May 28 23:51:26 [kernel] highmem bounce pool size: 64 pages
May 28 23:51:26 [kernel] msgmni has been set to 1497
May 28 23:51:26 [kernel] alg: No test for stdrng (krng)
May 28 23:51:26 [kernel] io scheduler noop registered
May 28 23:51:26 [kernel] io scheduler anticipatory registered (default)
May 28 23:51:26 [kernel] io scheduler deadline registered
May 28 23:51:26 [kernel] io scheduler cfq registered
May 28 23:51:26 [kernel] radeonfb 0000:00:10.0: enabling device (0006 -> 0007)
May 28 23:51:26 [kernel] radeonfb 0000:00:10.0: Invalid ROM contents
May 28 23:51:26 [kernel] radeonfb (0000:00:10.0): Invalid ROM signature 0 should be 0xaa55
May 28 23:51:26 [kernel] radeonfb: Retrieved PLL infos from Open Firmware
May 28 23:51:26 [kernel] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=190.00 Mhz, System=183.00 MHz
May 28 23:51:26 [kernel] radeonfb: PLL min 12000 max 35000
May 28 23:51:26 [kernel] i2c-adapter i2c-2: unable to read EDID block.
- Last output repeated 2 times -
May 28 23:51:26 [kernel] i2c-adapter i2c-3: unable to read EDID block.
- Last output repeated 2 times -
May 28 23:51:26 [kernel] radeonfb: Monitor 1 type LCD found
May 28 23:51:26 [kernel] radeonfb: EDID probed
May 28 23:51:26 [kernel] radeonfb: Monitor 2 type no found
May 28 23:51:26 [kernel] radeonfb: Using Firmware dividers 0x000600ad from PPLL 0
May 28 23:51:26 [kernel] radeonfb: Dynamic Clock Power Management enabled
May 28 23:51:26 [kernel] Console: switching to colour frame buffer device 128x48
May 28 23:51:26 [kernel] radeonfb: Backlight initialized (radeonbl0)
May 28 23:51:26 [kernel] radeonfb (0000:00:10.0): ATI Radeon 5c63 "\c"
May 28 23:51:26 [kernel] Generic non-volatile memory driver v1.1
May 28 23:51:26 [kernel] Linux agpgart interface v0.103
May 28 23:51:26 [kernel] agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset
May 28 23:51:26 [kernel] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 8
May 28 23:51:26 [kernel] agpgart-uninorth 0000:00:0b.0: AGP aperture is 32M @ 0x0
May 28 23:51:26 [kernel] [drm] Initialized drm 1.1.0 20060810
May 28 23:51:26 [kernel] [drm] Initialized radeon 1.29.0 20080528 on minor 0
May 28 23:51:26 [kernel] loop: module loaded
May 28 23:51:26 [kernel] sungem.c:v0.98 8/24/03 David S. Miller ([email protected])
May 28 23:51:26 [kernel] PHY ID: 4061e4, addr: 0
May 28 23:51:26 [kernel] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0d:93:4b:d6:8c
May 28 23:51:26 [kernel] eth0: Found BCM5221 PHY
May 28 23:51:26 [kernel] MacIO PCI driver attached to Intrepid chipset
May 28 23:51:26 [kernel] input: Macintosh mouse button emulation as /devices/virtual/input/input0
May 28 23:51:26 [kernel] Uniform Multi-Platform E-IDE driver
May 28 23:51:26 [kernel] adb: starting probe task...
May 28 23:51:26 [kernel] ide-pmac 0002:20:0d.0: enabling device (0000 -> 0002)
May 28 23:51:26 [kernel] adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f
May 28 23:51:26 [kernel] ADB keyboard at 2, handler 1
May 28 23:51:26 [kernel] Detected ADB keyboard, type ISO, swapping keys.
May 28 23:51:26 [kernel] input: ADB keyboard as /devices/virtual/input/input1
May 28 23:51:26 [kernel] input: ADB Powerbook buttons as /devices/virtual/input/input2
May 28 23:51:26 [kernel] ADB mouse at 3, handler set to 4 (trackpad)
May 28 23:51:26 [kernel] input: ADB mouse as /devices/virtual/input/input3
May 28 23:51:26 [kernel] adb: finished probe task...
May 28 23:51:26 [kernel] ide-pmac: Found Apple UniNorth ATA-6 controller (PCI), bus ID 3, irq 39
May 28 23:51:26 [kernel] Probing IDE interface ide0...
May 28 23:51:26 [kernel] hda: FUJITSU MHT2030AT, ATA DISK drive
May 28 23:51:26 [kernel] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
May 28 23:51:26 [kernel] hda: UDMA/100 mode selected
May 28 23:51:26 [kernel] ide0 at 0xf103a000-0xf103a070,0xf103a160 on irq 39
May 28 23:51:26 [kernel] ide-pmac: Found Apple KeyLargo ATA-3 controller (macio), bus ID 0, irq 24
May 28 23:51:26 [kernel] Probing IDE interface ide1...
May 28 23:51:26 [kernel] hdc: MATSHITACD-RW CW-8123, ATAPI CD/DVD-ROM drive
May 28 23:51:26 [kernel] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
May 28 23:51:26 [kernel] hdc: MWDMA2 mode selected
May 28 23:51:26 [kernel] ide1 at 0xf101a000-0xf101a070,0xf101a160 on irq 24
May 28 23:51:26 [kernel] ide-gd driver 1.18
May 28 23:51:26 [kernel] hda: max request size: 512KiB
May 28 23:51:26 [kernel] hda: 58605120 sectors (30005 MB) w/2048KiB Cache, CHS=16383/255/63
May 28 23:51:26 [kernel] ide-cd driver 5.00
May 28 23:51:26 [kernel] ide-cd: hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
May 28 23:51:26 [kernel] Uniform CD-ROM driver Revision: 3.20
May 28 23:51:26 [kernel] mice: PS/2 mouse device common for all mice
May 28 23:51:26 [kernel] i2c /dev entries driver
May 28 23:51:26 [kernel] TCP cubic registered
May 28 23:51:26 [kernel] NET: Registered protocol family 17
May 28 23:51:26 [kernel] input: PMU as /devices/virtual/input/input4
May 28 23:51:26 [kernel] Registered led device: pmu-front-led
May 28 23:51:26 [kernel] ReiserFS: hda7: found reiserfs format "3.6" with standard journal
May 28 23:51:26 [kernel] ReiserFS: hda7: using ordered data mode
May 28 23:51:26 [kernel] ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
May 28 23:51:26 [kernel] ReiserFS: hda7: checking transaction log (hda7)
May 28 23:51:26 [kernel] ReiserFS: hda7: Using r5 hash to sort names
May 28 23:51:26 [kernel] VFS: Mounted root (reiserfs filesystem) readonly on device 3:7.
May 28 23:51:26 [kernel] Freeing unused kernel memory: 188k init
May 28 23:51:26 [kernel] b43-pci-bridge 0001:10:12.0: enabling device (0004 -> 0006)
May 28 23:51:26 [kernel] ssb: Sonics Silicon Backplane found on PCI device 0001:10:12.0
May 28 23:51:26 [kernel] usbcore: registered new interface driver usbfs
May 28 23:51:26 [kernel] usbcore: registered new interface driver hub
May 28 23:51:26 [kernel] usbcore: registered new device driver usb
May 28 23:51:26 [kernel] PowerMac i2c bus pmu 2 registered
May 28 23:51:26 [kernel] PowerMac i2c bus pmu 1 registered
May 28 23:51:26 [kernel] PowerMac i2c bus mac-io 0 registered
May 28 23:51:26 [kernel] PowerMac i2c bus uni-n 1 registered
May 28 23:51:26 [kernel] PowerMac i2c bus uni-n 0 registered
May 28 23:51:26 [kernel] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
May 28 23:51:26 [kernel] Apple USB OHCI 0001:10:18.0 disabled by firmware
May 28 23:51:26 [kernel] Apple USB OHCI 0001:10:19.0 disabled by firmware
May 28 23:51:26 [kernel] ohci_hcd 0001:10:1a.0: enabling device (0000 -> 0002)
May 28 23:51:26 [kernel] ohci_hcd 0001:10:1a.0: OHCI Host Controller
May 28 23:51:26 [kernel] ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 1
May 28 23:51:26 [kernel] ohci_hcd 0001:10:1a.0: irq 29, io mem 0x80083000
May 28 23:51:26 [kernel] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
May 28 23:51:26 [kernel] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
May 28 23:51:26 [kernel] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
May 28 23:51:26 [kernel] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 28 23:51:26 [kernel] usb usb1: Product: OHCI Host Controller
May 28 23:51:26 [kernel] usb usb1: Manufacturer: Linux 2.6.29.4-00028-g6575141 ohci_hcd
May 28 23:51:26 [kernel] usb usb1: SerialNumber: 0001:10:1a.0
May 28 23:51:26 [kernel] usb usb1: configuration #1 chosen from 1 choice
May 28 23:51:26 [kernel] hub 1-0:1.0: USB hub found
May 28 23:51:26 [kernel] hub 1-0:1.0: 2 ports detected
May 28 23:51:26 [kernel] ehci_hcd 0001:10:1b.2: enabling device (0004 -> 0006)
May 28 23:51:26 [kernel] ehci_hcd 0001:10:1b.2: EHCI Host Controller
May 28 23:51:26 [kernel] ehci_hcd 0001:10:1b.2: new USB bus registered, assigned bus number 2
May 28 23:51:26 [kernel] ehci_hcd 0001:10:1b.2: irq 63, io mem 0x80080000
May 28 23:51:26 [kernel] ehci_hcd 0001:10:1b.2: USB 2.0 started, EHCI 1.00
May 28 23:51:26 [kernel] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
May 28 23:51:26 [kernel] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 28 23:51:26 [kernel] usb usb2: Product: EHCI Host Controller
May 28 23:51:26 [kernel] usb usb2: Manufacturer: Linux 2.6.29.4-00028-g6575141 ehci_hcd
May 28 23:51:26 [kernel] usb usb2: SerialNumber: 0001:10:1b.2
May 28 23:51:26 [kernel] usb usb2: configuration #1 chosen from 1 choice
May 28 23:51:26 [kernel] hub 2-0:1.0: USB hub found
May 28 23:51:26 [kernel] hub 2-0:1.0: 5 ports detected
May 28 23:51:26 [kernel] ohci_hcd 0001:10:1b.0: enabling device (0000 -> 0002)
May 28 23:51:26 [kernel] ohci_hcd 0001:10:1b.0: OHCI Host Controller
May 28 23:51:26 [kernel] ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus number 3
May 28 23:51:26 [kernel] ohci_hcd 0001:10:1b.0: irq 63, io mem 0x80082000
May 28 23:51:26 [kernel] ohci1394 0002:20:0e.0: enabling device (0000 -> 0002)
May 28 23:51:26 [kernel] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048] IR/IT contexts=[8/8]
May 28 23:51:26 [kernel] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
May 28 23:51:26 [kernel] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 28 23:51:26 [kernel] usb usb3: Product: OHCI Host Controller
May 28 23:51:26 [kernel] usb usb3: Manufacturer: Linux 2.6.29.4-00028-g6575141 ohci_hcd
May 28 23:51:26 [kernel] usb usb3: SerialNumber: 0001:10:1b.0
May 28 23:51:26 [kernel] usb usb3: configuration #1 chosen from 1 choice
May 28 23:51:26 [kernel] hub 3-0:1.0: USB hub found
May 28 23:51:26 [kernel] hub 3-0:1.0: 3 ports detected
May 28 23:51:26 [kernel] ohci_hcd 0001:10:1b.1: enabling device (0000 -> 0002)
May 28 23:51:26 [kernel] ohci_hcd 0001:10:1b.1: OHCI Host Controller
May 28 23:51:26 [kernel] ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 4
May 28 23:51:26 [kernel] ohci_hcd 0001:10:1b.1: irq 63, io mem 0x80081000
May 28 23:51:26 [kernel] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
May 28 23:51:26 [kernel] usb usb4: Product: OHCI Host Controller
May 28 23:51:26 [kernel] usb usb4: SerialNumber: 0001:10:1b.1
May 28 23:51:26 [kernel] usb usb4: configuration #1 chosen from 1 choice
May 28 23:51:26 [kernel] hub 4-0:1.0: USB hub found
May 28 23:51:26 [kernel] hub 4-0:1.0: 2 ports detected
May 28 23:51:26 [kernel] usb 1-1: new full speed USB device using ohci_hcd and address 2
May 28 23:51:26 [kernel] usb 1-1: New USB device found, idVendor=05ac, idProduct=1000
May 28 23:51:26 [kernel] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
May 28 23:51:26 [kernel] usb 1-1: configuration #1 chosen from 1 choice
May 28 23:51:26 [kernel] usb 2-2: new high speed USB device using ehci_hcd and address 2
May 28 23:51:26 [kernel] usb 2-2: New USB device found, idVendor=04b4, idProduct=6830
May 28 23:51:26 [kernel] usb 2-2: New USB device strings: Mfr=56, Product=58, SerialNumber=60
May 28 23:51:26 [kernel] usb 2-2: Product:
May 28 23:51:26 [kernel] usb 2-2: Manufacturer:
May 28 23:51:26 [kernel] usb 2-2: SerialNumber: D
May 28 23:51:26 [kernel] usb 2-2: configuration #1 chosen from 1 choice
May 28 23:51:26 [kernel] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000d93fffe4bd68c]
May 28 23:51:26 [kernel] cfg80211: Using static regulatory domain info
May 28 23:51:26 [kernel] cfg80211: Regulatory domain: US
May 28 23:51:26 [kernel] _(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
May 28 23:51:26 [kernel] _(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
May 28 23:51:26 [kernel] _(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
May 28 23:51:26 [kernel] _(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
May 28 23:51:26 [kernel] _(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
May 28 23:51:26 [kernel] _(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
May 28 23:51:26 [kernel] _(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
May 28 23:51:26 [kernel] cfg80211: Calling CRDA for country: US
May 28 23:51:26 [kernel] b43-phy0: Broadcom 4306 WLAN found
May 28 23:51:26 [kernel] wmaster0 (b43): not using net_device_ops yet
May 28 23:51:26 [kernel] phy0: Selected rate control algorithm 'minstrel'
May 28 23:51:26 [kernel] wlan0 (b43): not using net_device_ops yet
May 28 23:51:26 [kernel] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ]
May 28 23:51:26 [kernel] udev: renamed network interface wmaster0 to eth1
May 28 23:51:26 [kernel] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb1/1-1/1-1:1.0/input/input5
May 28 23:51:26 [kernel] generic-usb 0003:05AC:1000.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0001:10:1a.0-1/input0
May 28 23:51:26 [kernel] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb1/1-1/1-1:1.1/input/input6
May 28 23:51:26 [kernel] generic-usb 0003:05AC:1000.0002: input,hidraw1: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0001:10:1a.0-1/input1
May 28 23:51:26 [kernel] usbcore: registered new interface driver usbhid
May 28 23:51:26 [kernel] usbhid: v2.6:USB HID core driver
May 28 23:51:26 [kernel] SCSI subsystem initialized
May 28 23:51:26 [kernel] Initializing USB Mass Storage driver...
May 28 23:51:26 [kernel] scsi0 : SCSI emulation for USB Mass Storage devices
May 28 23:51:26 [kernel] usbcore: registered new interface driver usb-storage
May 28 23:51:26 [kernel] USB Mass Storage support registered.
May 28 23:51:26 [kernel] usb-storage: device found at 2
May 28 23:51:26 [kernel] usb-storage: waiting for device to settle before scanning
May 28 23:51:26 [kernel] adt746x: version 1 (supported)
May 28 23:51:26 [kernel] adt746x: Thermostat bus: 1, address: 0x2e, limit_adjust: 0, fan_speed: -1
May 28 23:51:26 [kernel] sensor 0: PWR/MEMORY BOTTOMSIDE
May 28 23:51:26 [kernel] sensor 1: CPU BOTTOMSIDE
May 28 23:51:26 [kernel] sensor 2: GPU BOTTOMSIDE
May 28 23:51:26 [kernel] adt746x: ADT7467 initializing
May 28 23:51:26 [kernel] adt746x: Lowering max temperatures from 69, 92, 101 to 70, 50, 70
May 28 23:51:26 [kernel] platform ppc-rtc.0: rtc core: registered ppc_md as rtc0
May 28 23:51:26 [kernel] input: PowerMac Beep as /devices/pci0001:10/0001:10:17.0/input/input7
May 28 23:51:26 [kernel] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [email protected]
May 28 23:51:26 [kernel] scsi 0:0:0:0: Direct-Access WDC WD16 00BEVE-11UYT0 0000 PQ: 0 ANSI: 0
May 28 23:51:26 [kernel] usb-storage: device scan complete
May 28 23:51:26 [kernel] Driver 'sd' needs updating - please use bus_type methods
May 28 23:51:26 [kernel] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
May 28 23:51:26 [kernel] sd 0:0:0:0: [sda] Write Protect is off
May 28 23:51:26 [kernel] sd 0:0:0:0: [sda] Mode Sense: 27 00 00 00
May 28 23:51:26 [kernel] sd 0:0:0:0: [sda] Assuming drive cache: write through
May 28 23:51:26 [kernel] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
May 28 23:51:26 [kernel] sd 0:0:0:0: [sda] Write Protect is off
May 28 23:51:26 [kernel] sd 0:0:0:0: [sda] Mode Sense: 27 00 00 00
May 28 23:51:26 [kernel] sd 0:0:0:0: [sda] Assuming drive cache: write through
May 28 23:51:26 [kernel] sda: sda1
May 28 23:51:26 [kernel] sd 0:0:0:0: [sda] Attached SCSI disk
May 28 23:51:26 [kernel] sd 0:0:0:0: Attached scsi generic sg0 type 0
May 28 23:51:26 [kernel] Adding 1048568k swap on /dev/hda6. Priority:-1 extents:1 across:1048568k
May 28 23:51:29 [kernel] ip_tables: (C) 2000-2006 Netfilter Core Team
May 28 23:51:31 [kernel] NET: Registered protocol family 10
May 28 23:51:31 [kernel] ADDRCONF(NETDEV_UP): eth0: link is not ready
May 28 23:51:31 [kernel] ip6_tables: (C) 2000-2006 Netfilter Core Team
May 28 23:51:33 [kernel] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
May 28 23:51:34 [kernel] Bluetooth: Core ver 2.14
May 28 23:51:34 [kernel] NET: Registered protocol family 31
May 28 23:51:34 [kernel] Bluetooth: HCI device and connection manager initialized
May 28 23:51:34 [kernel] Bluetooth: HCI socket layer initialized
May 28 23:51:35 [kernel] usb 1-1: USB disconnect, address 2
May 28 23:51:35 [kernel] usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -108
May 28 23:51:35 [kernel] usb 1-1: new full speed USB device using ohci_hcd and address 3
May 28 23:51:36 [kernel] usb 1-1: New USB device found, idVendor=05ac, idProduct=8203
May 28 23:51:36 [kernel] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
May 28 23:51:36 [kernel] usb 1-1: configuration #1 chosen from 1 choice
May 28 23:51:36 [kernel] Bluetooth: Generic Bluetooth USB driver ver 0.4
May 28 23:51:36 [kernel] usbcore: registered new interface driver btusb
May 28 23:51:37 [kernel] Bluetooth: L2CAP ver 2.11
May 28 23:51:37 [kernel] Bluetooth: L2CAP socket layer initialized
May 28 23:51:37 [kernel] Bluetooth: RFCOMM socket layer initialized
May 28 23:51:37 [kernel] Bluetooth: RFCOMM TTY layer initialized
May 28 23:51:37 [kernel] Bluetooth: RFCOMM ver 1.10
May 28 23:51:40 [kernel] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
May 28 23:51:40 [kernel] Bluetooth: BNEP filters: protocol multicast
May 28 23:51:58 [kernel] b43 ssb0:0: firmware: requesting b43/ucode5.fw
May 28 23:51:58 [kernel] b43 ssb0:0: firmware: requesting b43/pcm5.fw
May 28 23:51:59 [kernel] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
May 28 23:51:59 [kernel] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
May 28 23:51:59 [kernel] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
May 28 23:51:59 [kernel] Registered led device: b43-phy0::tx
May 28 23:51:59 [kernel] Registered led device: b43-phy0::rx
May 28 23:51:59 [kernel] b43-phy0: Radio turned on by software
May 28 23:51:59 [kernel] ADDRCONF(NETDEV_UP): wlan0: link is not ready
May 28 23:52:11 [kernel] radeonfb 0000:00:10.0: Invalid ROM contents
- Last output repeated twice -
May 28 23:52:11 [kernel] agpgart-uninorth 0000:00:0b.0: putting AGP V2 device into 4x mode
May 28 23:52:11 [kernel] radeonfb 0000:00:10.0: putting AGP V2 device into 4x mode
May 28 23:52:12 [kernel] [drm] Setting GART location based on new memory map
May 28 23:52:12 [kernel] [drm] Loading R200 Microcode
May 28 23:52:12 [kernel] [drm] writeback test succeeded in 1 usecs
May 28 23:52:59 [kernel] ADDRCONF(NETDEV_UP): eth0: link is not ready
May 28 23:54:47 [kernel] GMT Delta read from XPRAM: 0 minutes, DST: off
May 28 23:54:47 [kernel] time_init: decrementer frequency = 18.432000 MHz
May 28 23:54:47 [kernel] time_init: processor frequency = 1199.999997 MHz
May 28 23:54:47 [kernel] clocksource: timebase mult[d9038e4] shift[22] registered
May 28 23:54:47 [kernel] clockevent: decrementer mult[4b7] shift[16] cpu[0]
May 28 23:54:47 [kernel] Console: colour dummy device 80x25
May 28 23:54:47 [kernel] console handover: boot [udbg0] -> real [tty0]
May 28 23:54:47 [kernel] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
May 28 23:54:47 [kernel] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
May 28 23:54:47 [kernel] High memory: 524288k
May 28 23:54:47 [kernel] Memory: 1289604k/1310720k available (4092k kernel code, 19972k reserved, 180k data, 130k bss, 176k init)
May 28 23:54:47 [kernel] Calibrating delay loop... 36.32 BogoMIPS (lpj=61312)
May 28 23:54:47 [kernel] Mount-cache hash table entries: 512
May 28 23:54:47 [kernel] device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1"
May 28 23:54:47 [kernel] net_namespace: 936 bytes
May 28 23:54:47 [kernel] NET: Registered protocol family 16
May 28 23:54:47 [kernel] irq: irq 42 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 42
May 28 23:54:47 [kernel] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
May 28 23:54:47 [kernel] channel 0 bus <multibus>
May 28 23:54:47 [kernel] channel 1 bus <multibus>
May 28 23:54:47 [kernel] irq: irq 26 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 26
May 28 23:54:47 [kernel] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
May 28 23:54:47 [kernel] channel 0 bus <multibus>
May 28 23:54:47 [kernel] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c
May 28 23:54:47 [kernel] channel 1 bus <multibus>
May 28 23:54:47 [kernel] channel 2 bus <multibus>
May 28 23:54:47 [kernel] irq: irq 25 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 25
May 28 23:54:47 [kernel] irq: irq 47 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 47
May 28 23:54:47 [kernel] PCI: Probing PCI hardware
May 28 23:54:47 [kernel] pci 0000:00:10.0: reg 10 32bit mmio: [0x98000000-0x9fffffff]
May 28 23:54:47 [kernel] pci 0000:00:10.0: reg 14 io port: [0x400-0x4ff]
May 28 23:54:47 [kernel] pci 0000:00:10.0: reg 18 32bit mmio: [0x90000000-0x9000ffff]
May 28 23:54:47 [kernel] pci 0000:00:10.0: reg 30 32bit mmio: [0x90020000-0x9003ffff]
May 28 23:54:47 [kernel] pci 0000:00:10.0: supports D1 D2
May 28 23:54:47 [kernel] irq: irq 48 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 48
May 28 23:54:47 [kernel] pci 0001:10:12.0: reg 10 32bit mmio: [0x80084000-0x80085fff]
May 28 23:54:47 [kernel] pci 0001:10:12.0: supports D1 D2
May 28 23:54:47 [kernel] pci 0001:10:12.0: PME# supported from D0 D1 D2 D3hot D3cold
May 28 23:54:47 [kernel] pci 0001:10:12.0: PME# disabled
May 28 23:54:47 [kernel] pci 0001:10:17.0: reg 10 32bit mmio: [0x80000000-0x8007ffff]
May 28 23:54:47 [kernel] pci 0001:10:18.0: reg 10 32bit mmio: [0x000000-0x000fff]
May 28 23:54:47 [kernel] pci 0001:10:19.0: reg 10 32bit mmio: [0x000000-0x000fff]
May 28 23:54:47 [kernel] pci 0001:10:1a.0: reg 10 32bit mmio: [0x80083000-0x80083fff]
May 28 23:54:47 [kernel] pci 0001:10:1b.0: reg 10 32bit mmio: [0x80082000-0x80082fff]
May 28 23:54:47 [kernel] pci 0001:10:1b.0: supports D1 D2
May 28 23:54:47 [kernel] pci 0001:10:1b.0: PME# supported from D0 D1 D2 D3hot D3cold
May 28 23:54:47 [kernel] pci 0001:10:1b.0: PME# disabled
May 28 23:54:47 [kernel] pci 0001:10:1b.1: reg 10 32bit mmio: [0x80081000-0x80081fff]
May 28 23:54:47 [kernel] pci 0001:10:1b.1: supports D1 D2
May 28 23:54:47 [kernel] pci 0001:10:1b.1: PME# supported from D0 D1 D2 D3hot D3cold
May 28 23:54:47 [kernel] pci 0001:10:1b.1: PME# disabled
May 28 23:54:47 [kernel] pci 0001:10:1b.2: reg 10 32bit mmio: [0x80080000-0x800800ff]
May 28 23:54:47 [kernel] pci 0001:10:1b.2: supports D1 D2
May 28 23:54:47 [kernel] pci 0001:10:1b.2: PME# supported from D0 D1 D2 D3hot D3cold
May 28 23:54:47 [kernel] pci 0001:10:1b.2: PME# disabled
May 28 23:54:47 [kernel] irq: irq 52 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 52
May 28 23:54:47 [kernel] irq: irq 27 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 27
May 28 23:54:47 [kernel] irq: irq 28 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 28
May 28 23:54:47 [kernel] irq: irq 29 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 29
May 28 23:54:47 [kernel] irq: irq 63 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 63
May 28 23:54:47 [kernel] pci 0002:20:0d.0: reg 10 32bit mmio: [0xf5004000-0xf5007fff]
May 28 23:54:47 [kernel] pci 0002:20:0e.0: reg 10 32bit mmio: [0xf5000000-0xf5000fff]
May 28 23:54:47 [kernel] pci 0002:20:0e.0: supports D1 D2
May 28 23:54:47 [kernel] pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot
May 28 23:54:47 [kernel] pci 0002:20:0e.0: PME# disabled
May 28 23:54:47 [kernel] pci 0002:20:0f.0: reg 10 32bit mmio: [0xf5200000-0xf53fffff]
May 28 23:54:47 [kernel] pci 0002:20:0f.0: reg 30 32bit mmio: [0xf5100000-0xf51fffff]
May 28 23:54:47 [kernel] irq: irq 39 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 39
May 28 23:54:47 [kernel] PCI 0000:00 Cannot reserve Legacy IO [0x802000-0x802fff]
May 28 23:54:47 [kernel] pci_bus 0000:00: resource 0 io: [0x802000-0x1001fff]
May 28 23:54:47 [kernel] pci_bus 0000:00: resource 1 mem: [0xf1000000-0xf1ffffff]
May 28 23:54:47 [kernel] pci_bus 0000:00: resource 2 mem: [0x90000000-0x9fffffff]
May 28 23:54:47 [kernel] pci_bus 0001:10: resource 0 io: [0x00-0x7fffff]
May 28 23:54:47 [kernel] pci_bus 0001:10: resource 1 mem: [0xf3000000-0xf3ffffff]
May 28 23:54:47 [kernel] pci_bus 0001:10: resource 2 mem: [0x80000000-0x8fffffff]
May 28 23:54:47 [kernel] pci_bus 0002:20: resource 0 io: [0xff7fe000-0xffffdfff]
May 28 23:54:47 [kernel] pci_bus 0002:20: resource 1 mem: [0xf5000000-0xf5ffffff]
May 28 23:54:47 [kernel] bio: create slab <bio-0> at 0
May 28 23:54:47 [kernel] Switched to NOHz mode on CPU #0
May 28 23:54:47 [kernel] NET: Registered protocol family 2
May 28 23:54:47 [kernel] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
May 28 23:54:47 [kernel] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
May 28 23:54:47 [kernel] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
May 28 23:54:47 [kernel] TCP: Hash tables configured (established 131072 bind 65536)
May 28 23:54:47 [kernel] TCP reno registered
May 28 23:54:47 [kernel] NET: Registered protocol family 1
May 28 23:54:47 [kernel] Thermal assist unit not available
May 28 23:54:47 [kernel] setup_kcore: restrict size=3fffffff
May 28 23:54:47 [kernel] Registering PowerMac CPU frequency driver
May 28 23:54:47 [kernel] Low: 599 Mhz, High: 1199 Mhz, Boot: 599 Mhz
May 28 23:54:47 [kernel] highmem bounce pool size: 64 pages
May 28 23:54:47 [kernel] msgmni has been set to 1496
May 28 23:54:47 [kernel] alg: No test for stdrng (krng)
May 28 23:54:47 [kernel] io scheduler noop registered
May 28 23:54:47 [kernel] io scheduler anticipatory registered (default)
May 28 23:54:47 [kernel] io scheduler deadline registered
May 28 23:54:47 [kernel] io scheduler cfq registered
May 28 23:54:47 [kernel] radeonfb 0000:00:10.0: enabling device (0006 -> 0007)
May 28 23:54:47 [kernel] radeonfb 0000:00:10.0: Invalid ROM contents
May 28 23:54:47 [kernel] radeonfb (0000:00:10.0): Invalid ROM signature 0 should be 0xaa55
May 28 23:54:47 [kernel] radeonfb: Retrieved PLL infos from Open Firmware
May 28 23:54:47 [kernel] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=190.00 Mhz, System=183.00 MHz
May 28 23:54:47 [kernel] radeonfb: PLL min 12000 max 35000
May 28 23:54:47 [kernel] i2c-adapter i2c-2: unable to read EDID block.
- Last output repeated 2 times -
May 28 23:54:47 [kernel] i2c-adapter i2c-3: unable to read EDID block.
- Last output repeated 2 times -
May 28 23:54:48 [kernel] radeonfb: Monitor 1 type LCD found
May 28 23:54:48 [kernel] radeonfb: EDID probed
May 28 23:54:48 [kernel] radeonfb: Monitor 2 type no found
May 28 23:54:48 [kernel] radeonfb: Using Firmware dividers 0x000600ad from PPLL 0
May 28 23:54:48 [kernel] radeonfb: Dynamic Clock Power Management enabled
May 28 23:54:48 [kernel] Console: switching to colour frame buffer device 128x48
May 28 23:54:48 [kernel] radeonfb: Backlight initialized (radeonbl0)
May 28 23:54:48 [kernel] radeonfb (0000:00:10.0): ATI Radeon 5c63 "\c"
May 28 23:54:48 [kernel] Generic non-volatile memory driver v1.1
May 28 23:54:48 [kernel] Linux agpgart interface v0.103
May 28 23:54:48 [kernel] agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset
May 28 23:54:48 [kernel] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 8
May 28 23:54:48 [kernel] agpgart-uninorth 0000:00:0b.0: AGP aperture is 32M @ 0x0
May 28 23:54:48 [kernel] [drm] Initialized drm 1.1.0 20060810
May 28 23:54:48 [kernel] [drm] Initialized radeon 1.30.0 20080528 for 0000:00:10.0 on minor 0
May 28 23:54:48 [kernel] loop: module loaded
May 28 23:54:48 [kernel] MacIO PCI driver attached to Intrepid chipset
May 28 23:54:48 [kernel] irq: irq 32 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 32
May 28 23:54:48 [kernel] irq: irq 24 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 24
May 28 23:54:48 [kernel] irq: irq 12 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 16
May 28 23:54:48 [kernel] irq: irq 22 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 22
May 28 23:54:48 [kernel] irq: irq 5 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 17
May 28 23:54:48 [kernel] irq: irq 6 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 18
May 28 23:54:48 [kernel] irq: irq 23 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 23
May 28 23:54:48 [kernel] irq: irq 7 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 19
May 28 23:54:48 [kernel] irq: irq 8 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 20
May 28 23:54:48 [kernel] input: Macintosh mouse button emulation as /devices/virtual/input/input0
May 28 23:54:48 [kernel] Uniform Multi-Platform E-IDE driver
May 28 23:54:48 [kernel] adb: starting probe task...
May 28 23:54:48 [kernel] ide-pmac 0002:20:0d.0: enabling device (0000 -> 0002)
May 28 23:54:48 [kernel] adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f
May 28 23:54:48 [kernel] ADB keyboard at 2, handler 1
May 28 23:54:48 [kernel] Detected ADB keyboard, type ISO, swapping keys.
May 28 23:54:48 [kernel] input: ADB Powerbook buttons as /devices/virtual/input/input2
May 28 23:54:48 [kernel] ADB mouse at 3, handler set to 4 (trackpad)
May 28 23:54:48 [kernel] input: ADB mouse as /devices/virtual/input/input3
May 28 23:54:48 [kernel] adb: finished probe task...
May 28 23:54:48 [kernel] ide-pmac: Found Apple UniNorth ATA-6 controller (PCI), bus ID 3, irq 39
May 28 23:54:48 [kernel] Probing IDE interface ide0...
May 28 23:54:48 [kernel] hda: FUJITSU MHT2030AT, ATA DISK drive
May 28 23:54:48 [kernel] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
May 28 23:54:48 [kernel] hda: UDMA/100 mode selected
May 28 23:54:48 [kernel] ide0 at 0xf103a000-0xf103a070,0xf103a160 on irq 39
May 28 23:54:48 [kernel] ide-pmac: Found Apple KeyLargo ATA-3 controller (macio), bus ID 0, irq 24
May 28 23:54:48 [kernel] Probing IDE interface ide1...
May 28 23:54:48 [kernel] hdc: MATSHITACD-RW CW-8123, ATAPI CD/DVD-ROM drive
May 28 23:54:48 [kernel] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
May 28 23:54:48 [kernel] hdc: MWDMA2 mode selected
May 28 23:54:48 [kernel] ide1 at 0xf101a000-0xf101a070,0xf101a160 on irq 24
May 28 23:54:48 [kernel] ide-gd driver 1.18
May 28 23:54:48 [kernel] hda: max request size: 512KiB
May 28 23:54:48 [kernel] hda: 58605120 sectors (30005 MB) w/2048KiB Cache, CHS=16383/255/63
May 28 23:54:48 [kernel] hda: cache flushes supported
May 28 23:54:48 [kernel] hda: [mac] hda1 hda2 hda3 hda4 hda5 hda6 hda7 hda8 hda9
May 28 23:54:48 [kernel] ide-cd driver 5.00
May 28 23:54:48 [kernel] ide-cd: hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
May 28 23:54:48 [kernel] Uniform CD-ROM driver Revision: 3.20
May 28 23:54:48 [kernel] sungem.c:v0.98 8/24/03 David S. Miller ([email protected])
May 28 23:54:48 [kernel] PHY ID: 4061e4, addr: 0
May 28 23:54:48 [kernel] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0d:93:4b:d6:8c
May 28 23:54:48 [kernel] eth0: Found BCM5221 PHY
May 28 23:54:48 [kernel] mice: PS/2 mouse device common for all mice
May 28 23:54:48 [kernel] i2c /dev entries driver
May 28 23:54:48 [kernel] TCP cubic registered
May 28 23:54:48 [kernel] NET: Registered protocol family 17
May 28 23:54:48 [kernel] input: PMU as /devices/virtual/input/input4
May 28 23:54:48 [kernel] Registered led device: pmu-front-led
May 28 23:54:48 [kernel] REISERFS (device hda7): found reiserfs format "3.6" with standard journal
May 28 23:54:48 [kernel] REISERFS (device hda7): using ordered data mode
May 28 23:54:48 [kernel] REISERFS (device hda7): journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
May 28 23:54:48 [kernel] REISERFS (device hda7): checking transaction log (hda7)
May 28 23:54:48 [kernel] REISERFS (device hda7): Using r5 hash to sort names
May 28 23:54:48 [kernel] VFS: Mounted root (reiserfs filesystem) readonly on device 3:7.
May 28 23:54:48 [kernel] Freeing unused kernel memory: 176k init
May 28 23:54:48 [kernel] b43-pci-bridge 0001:10:12.0: enabling device (0004 -> 0006)
May 28 23:54:48 [kernel] ssb: Sonics Silicon Backplane found on PCI device 0001:10:12.0
May 28 23:54:48 [kernel] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
May 28 23:54:48 [kernel] usbcore: registered new interface driver usbfs
May 28 23:54:48 [kernel] usbcore: registered new interface driver hub
May 28 23:54:48 [kernel] usbcore: registered new device driver usb
May 28 23:54:48 [kernel] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
May 28 23:54:48 [kernel] Apple USB OHCI 0001:10:18.0 disabled by firmware
May 28 23:54:48 [kernel] Apple USB OHCI 0001:10:19.0 disabled by firmware
May 28 23:54:48 [kernel] ohci_hcd 0001:10:1a.0: enabling device (0000 -> 0002)
May 28 23:54:48 [kernel] ohci_hcd 0001:10:1a.0: OHCI Host Controller
May 28 23:54:48 [kernel] ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 1
May 28 23:54:48 [kernel] ohci_hcd 0001:10:1a.0: irq 29, io mem 0x80083000
May 28 23:54:48 [kernel] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
May 28 23:54:48 [kernel] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
May 28 23:54:48 [kernel] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
May 28 23:54:48 [kernel] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 28 23:54:48 [kernel] usb usb1: Product: OHCI Host Controller
May 28 23:54:48 [kernel] usb usb1: Manufacturer: Linux 2.6.30-rc7 ohci_hcd
May 28 23:54:48 [kernel] usb usb1: SerialNumber: 0001:10:1a.0
May 28 23:54:48 [kernel] usb usb1: configuration #1 chosen from 1 choice
May 28 23:54:48 [kernel] hub 1-0:1.0: USB hub found
May 28 23:54:48 [kernel] hub 1-0:1.0: 2 ports detected
May 28 23:54:48 [kernel] ehci_hcd 0001:10:1b.2: enabling device (0004 -> 0006)
May 28 23:54:48 [kernel] ehci_hcd 0001:10:1b.2: EHCI Host Controller
May 28 23:54:48 [kernel] ehci_hcd 0001:10:1b.2: new USB bus registered, assigned bus number 2
May 28 23:54:48 [kernel] ehci_hcd 0001:10:1b.2: irq 63, io mem 0x80080000
May 28 23:54:48 [kernel] ehci_hcd 0001:10:1b.2: USB 2.0 started, EHCI 1.00
May 28 23:54:48 [kernel] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
May 28 23:54:48 [kernel] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 28 23:54:48 [kernel] usb usb2: Product: EHCI Host Controller
May 28 23:54:48 [kernel] usb usb2: Manufacturer: Linux 2.6.30-rc7 ehci_hcd
May 28 23:54:48 [kernel] usb usb2: SerialNumber: 0001:10:1b.2
May 28 23:54:48 [kernel] usb usb2: configuration #1 chosen from 1 choice
May 28 23:54:48 [kernel] hub 2-0:1.0: USB hub found
May 28 23:54:48 [kernel] hub 2-0:1.0: 5 ports detected
May 28 23:54:48 [kernel] ohci_hcd 0001:10:1b.0: OHCI Host Controller
May 28 23:54:48 [kernel] ohci_hcd 0001:10:1b.0: irq 63, io mem 0x80082000
May 28 23:54:48 [kernel] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
May 28 23:54:48 [kernel] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 28 23:54:48 [kernel] usb usb3: Product: OHCI Host Controller
May 28 23:54:48 [kernel] usb usb3: Manufacturer: Linux 2.6.30-rc7 ohci_hcd
May 28 23:54:48 [kernel] usb usb3: SerialNumber: 0001:10:1b.0
May 28 23:54:48 [kernel] usb usb3: configuration #1 chosen from 1 choice
May 28 23:54:48 [kernel] hub 3-0:1.0: USB hub found
May 28 23:54:48 [kernel] hub 3-0:1.0: 3 ports detected
May 28 23:54:48 [kernel] ohci_hcd 0001:10:1b.1: enabling device (0000 -> 0002)
May 28 23:54:48 [kernel] ohci_hcd 0001:10:1b.1: OHCI Host Controller
May 28 23:54:48 [kernel] ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 4
May 28 23:54:48 [kernel] ohci_hcd 0001:10:1b.1: irq 63, io mem 0x80081000
May 28 23:54:48 [kernel] PowerMac i2c bus pmu 2 registered
May 28 23:54:48 [kernel] PowerMac i2c bus pmu 1 registered
May 28 23:54:48 [kernel] PowerMac i2c bus mac-io 0 registered
May 28 23:54:48 [kernel] PowerMac i2c bus uni-n 1 registered
May 28 23:54:48 [kernel] PowerMac i2c bus uni-n 0 registered
May 28 23:54:48 [kernel] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
May 28 23:54:48 [kernel] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 28 23:54:48 [kernel] usb usb4: Product: OHCI Host Controller
May 28 23:54:48 [kernel] usb usb4: Manufacturer: Linux 2.6.30-rc7 ohci_hcd
May 28 23:54:48 [kernel] usb usb4: SerialNumber: 0001:10:1b.1
May 28 23:54:48 [kernel] usb usb4: configuration #1 chosen from 1 choice
May 28 23:54:48 [kernel] hub 4-0:1.0: USB hub found
May 28 23:54:48 [kernel] hub 4-0:1.0: 2 ports detected
May 28 23:54:48 [kernel] usb 1-1: new full speed USB device using ohci_hcd and address 2
May 28 23:54:48 [kernel] ohci1394 0002:20:0e.0: enabling device (0000 -> 0002)
May 28 23:54:48 [kernel] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048] IR/IT contexts=[8/8]
May 28 23:54:48 [kernel] usb 1-1: New USB device found, idVendor=05ac, idProduct=1000
May 28 23:54:48 [kernel] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
May 28 23:54:48 [kernel] usb 1-1: configuration #1 chosen from 1 choice
May 28 23:54:48 [kernel] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000d93fffe4bd68c]
May 28 23:54:48 [kernel] cfg80211: Using static regulatory domain info
May 28 23:54:48 [kernel] cfg80211: Regulatory domain: US
May 28 23:54:48 [kernel] _(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
May 28 23:54:48 [kernel] _(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
May 28 23:54:48 [kernel] _(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
May 28 23:54:48 [kernel] _(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
May 28 23:54:48 [kernel] _(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
May 28 23:54:48 [kernel] _(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
May 28 23:54:48 [kernel] _(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
May 28 23:54:48 [kernel] cfg80211: Calling CRDA for country: US
May 28 23:54:48 [kernel] b43-phy0: Broadcom 4306 WLAN found (core revision 5)
May 28 23:54:48 [kernel] phy0: Selected rate control algorithm 'minstrel'
May 28 23:54:48 [kernel] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ]
May 28 23:54:48 [kernel] udev: renamed network interface wmaster0 to eth1
May 28 23:54:48 [kernel] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb1/1-1/1-1:1.0/input/input5
May 28 23:54:48 [kernel] generic-usb 0003:05AC:1000.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0001:10:1a.0-1/input0
May 28 23:54:48 [kernel] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb1/1-1/1-1:1.1/input/input6
May 28 23:54:48 [kernel] generic-usb 0003:05AC:1000.0002: input,hidraw1: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0001:10:1a.0-1/input1
May 28 23:54:48 [kernel] usbcore: registered new interface driver usbhid
May 28 23:54:48 [kernel] usbhid: v2.6:USB HID core driver
May 28 23:54:48 [kernel] adt746x: version 1 (supported)
May 28 23:54:48 [kernel] adt746x: Thermostat bus: 1, address: 0x2e, limit_adjust: 0, fan_speed: -1
May 28 23:54:48 [kernel] sensor 0: PWR/MEMORY BOTTOMSIDE
May 28 23:54:48 [kernel] sensor 1: CPU BOTTOMSIDE
May 28 23:54:48 [kernel] sensor 2: GPU BOTTOMSIDE
May 28 23:54:48 [kernel] adt746x: ADT7467 initializing
May 28 23:54:48 [kernel] adt746x: Lowering max temperatures from 69, 92, 101 to 70, 50, 70
May 28 23:54:48 [kernel] irq: irq 1 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 21
May 28 23:54:48 [kernel] irq: irq 2 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 30
May 28 23:54:48 [kernel] irq: irq 61 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 61
May 28 23:54:48 [kernel] input: PowerMac Beep as /devices/pci0001:10/0001:10:17.0/input/input7
May 28 23:54:48 [kernel] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [email protected]
May 28 23:54:48 [kernel] Adding 1048568k swap on /dev/hda6. Priority:-1 extents:1 across:1048568k
May 28 23:54:52 [kernel] NET: Registered protocol family 10
May 28 23:54:52 [kernel] ip_tables: (C) 2000-2006 Netfilter Core Team
May 28 23:54:52 [kernel] ADDRCONF(NETDEV_UP): eth0: link is not ready
May 28 23:54:53 [kernel] ip6_tables: (C) 2000-2006 Netfilter Core Team
May 28 23:54:55 [kernel] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
May 28 23:54:56 [kernel] Bluetooth: Core ver 2.15
May 28 23:54:56 [kernel] NET: Registered protocol family 31
May 28 23:54:56 [kernel] Bluetooth: HCI device and connection manager initialized
May 28 23:54:56 [kernel] Bluetooth: HCI socket layer initialized
May 28 23:54:56 [kernel] usb 1-1: USB disconnect, address 2
May 28 23:54:56 [kernel] usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -108
May 28 23:54:57 [kernel] usb 1-1: new full speed USB device using ohci_hcd and address 3
May 28 23:54:57 [kernel] usb 1-1: New USB device found, idVendor=05ac, idProduct=8203
May 28 23:54:57 [kernel] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
May 28 23:54:57 [kernel] usb 1-1: configuration #1 chosen from 1 choice
May 28 23:54:57 [kernel] Bluetooth: Generic Bluetooth USB driver ver 0.5
May 28 23:54:57 [kernel] usbcore: registered new interface driver btusb
May 28 23:54:58 [kernel] Bluetooth: L2CAP ver 2.13
May 28 23:54:58 [kernel] Bluetooth: L2CAP socket layer initialized
May 28 23:54:59 [kernel] Bluetooth: RFCOMM socket layer initialized
May 28 23:54:59 [kernel] Bluetooth: RFCOMM TTY layer initialized
May 28 23:54:59 [kernel] Bluetooth: RFCOMM ver 1.11
May 28 23:55:01 [kernel] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
May 28 23:55:01 [kernel] Bluetooth: BNEP filters: protocol multicast
May 28 23:55:19 [kernel] b43 ssb0:0: firmware: requesting b43/ucode5.fw
May 28 23:55:19 [kernel] b43 ssb0:0: firmware: requesting b43/pcm5.fw
May 28 23:55:19 [kernel] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
May 28 23:55:20 [kernel] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
May 28 23:55:20 [kernel] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
May 28 23:55:20 [kernel] Registered led device: b43-phy0::tx
May 28 23:55:20 [kernel] Registered led device: b43-phy0::rx
May 28 23:55:20 [kernel] b43-phy0: Radio turned on by software
May 28 23:55:20 [kernel] ADDRCONF(NETDEV_UP): wlan0: link is not ready
May 28 23:55:31 [kernel] radeonfb 0000:00:10.0: Invalid ROM contents
- Last output repeated twice -
May 28 23:55:31 [kernel] agpgart-uninorth 0000:00:0b.0: putting AGP V2 device into 4x mode
May 28 23:55:31 [kernel] radeonfb 0000:00:10.0: putting AGP V2 device into 4x mode
May 28 23:55:32 [kernel] [drm] Setting GART location based on new memory map
May 28 23:55:32 [kernel] [drm] Loading R200 Microcode
May 28 23:55:32 [kernel] [drm] writeback test succeeded in 1 usecs
May 28 23:56:30 [kernel] Freezing user space processes ... (elapsed 0.00 seconds) done.
May 28 23:56:30 [kernel] Freezing remaining freezable tasks ... (elapsed 1.12 seconds) done.
May 28 23:56:30 [kernel] Suspending console(s) (use no_console_suspend to debug)
May 28 23:56:30 [kernel] btusb_bulk_complete: hci0 urb ef2d9560 failed to resubmit (1)
May 28 23:56:30 [kernel] btusb_bulk_complete: hci0 urb ef1ef4c0 failed to resubmit (1)
May 28 23:56:30 [kernel] btusb_intr_complete: hci0 urb ef1ef440 failed to resubmit (1)
May 28 23:56:30 [kernel] eth0: suspending, WakeOnLan disabled
May 28 23:56:30 [kernel] ehci_hcd 0001:10:1b.2: PME# disabled
May 28 23:56:30 [kernel] ohci_hcd 0001:10:1b.1: PME# disabled
May 28 23:56:30 [kernel] ohci_hcd 0001:10:1b.0: PME# disabled
May 28 23:56:30 [kernel] radeonfb (0000:00:10.0): suspending for event: 2...
May 28 23:56:30 [kernel] agpgart-uninorth 0000:00:0b.0: disabling AGP on device 0000:00:10.0
May 28 23:56:30 [kernel] agpgart-uninorth 0000:00:0b.0: disabling AGP on bridge
May 28 23:56:30 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0xc (was 0x0, writing 0x90020001)
May 28 23:56:30 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x6 (was 0x0, writing 0x90000000)
May 28 23:56:30 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x5 (was 0x1, writing 0x401)
May 28 23:56:30 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x4 (was 0x8, writing 0x98000008)
May 28 23:56:30 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x3 (was 0x0, writing 0xff08)
May 28 23:56:30 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00007)
May 28 23:56:30 [kernel] b43-pci-bridge 0001:10:12.0: restoring config space at offset 0x4 (was 0x0, writing 0x80084000)
May 28 23:56:30 [kernel] b43-pci-bridge 0001:10:12.0: restoring config space at offset 0x3 (was 0x0, writing 0x1000)
May 28 23:56:30 [kernel] b43-pci-bridge 0001:10:12.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
May 28 23:56:30 [kernel] ohci_hcd 0001:10:1b.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100002)
May 28 23:56:30 [kernel] ohci_hcd 0001:10:1b.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100002)
May 28 23:56:30 [kernel] ehci_hcd 0001:10:1b.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100012)
May 28 23:56:30 [kernel] radeonfb (0000:00:10.0): resuming from state: 2...
May 28 23:56:30 [kernel] agpgart-uninorth 0000:00:0b.0: putting AGP V2 device into 4x mode
May 28 23:56:30 [kernel] radeonfb 0000:00:10.0: putting AGP V2 device into 4x mode
May 28 23:56:30 [kernel] ohci_hcd 0001:10:1b.0: PME# disabled
- Last output repeated twice -
May 28 23:56:30 [kernel] ohci_hcd 0001:10:1b.1: PME# disabled
- Last output repeated twice -
May 28 23:56:30 [kernel] ehci_hcd 0001:10:1b.2: PME# disabled
- Last output repeated twice -
May 28 23:56:30 [kernel] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048] IR/IT contexts=[8/8]
May 28 23:56:30 [kernel] eth0: resuming
May 28 23:56:30 [kernel] PHY ID: 4061e4, addr: 0
May 28 23:56:30 [kernel] adb: starting probe task...
May 28 23:56:30 [kernel] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
May 28 23:56:30 [kernel] hda: UDMA/100 mode selected
May 28 23:56:30 [kernel] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
May 28 23:56:30 [kernel] hdc: MWDMA2 mode selected
May 28 23:56:30 [kernel] adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f
May 28 23:56:30 [kernel] ADB keyboard at 2, handler 1
May 28 23:56:30 [kernel] ADB mouse at 3, handler set to 4 (trackpad)
May 28 23:56:30 [kernel] adb: finished probe task...
May 28 23:56:30 [kernel] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
May 28 23:56:30 [kernel] Registered led device: b43-phy0::tx
May 28 23:56:30 [kernel] Registered led device: b43-phy0::rx
May 28 23:56:51 [kernel] Freezing user space processes ... (elapsed 0.00 seconds) done.
May 28 23:56:51 [kernel] Freezing remaining freezable tasks ... (elapsed 0.25 seconds) done.
May 28 23:56:51 [kernel] Suspending console(s) (use no_console_suspend to debug)
May 28 23:56:51 [kernel] ohci_hcd 0001:10:1a.0: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
May 28 23:56:51 [kernel] btusb_bulk_complete: hci0 urb ef875ae0 failed to resubmit (1)
May 28 23:56:51 [kernel] btusb_bulk_complete: hci0 urb ef875b60 failed to resubmit (1)
May 28 23:56:51 [kernel] btusb_intr_complete: hci0 urb ef875be0 failed to resubmit (1)
May 28 23:56:51 [kernel] eth0: suspending, WakeOnLan disabled
May 28 23:56:51 [kernel] ehci_hcd 0001:10:1b.2: PME# disabled
May 28 23:56:51 [kernel] ohci_hcd 0001:10:1b.1: PME# disabled
May 28 23:56:51 [kernel] ohci_hcd 0001:10:1b.0: PME# disabled
May 28 23:56:51 [kernel] radeonfb (0000:00:10.0): suspending for event: 2...
May 28 23:56:51 [kernel] agpgart-uninorth 0000:00:0b.0: disabling AGP on device 0000:00:10.0
May 28 23:56:51 [kernel] agpgart-uninorth 0000:00:0b.0: disabling AGP on bridge
May 28 23:56:51 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0xc (was 0x0, writing 0x90020001)
May 28 23:56:51 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x6 (was 0x0, writing 0x90000000)
May 28 23:56:51 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x5 (was 0x1, writing 0x401)
May 28 23:56:51 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x4 (was 0x8, writing 0x98000008)
May 28 23:56:51 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x3 (was 0x0, writing 0xff08)
May 28 23:56:51 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00007)
May 28 23:56:51 [kernel] b43-pci-bridge 0001:10:12.0: restoring config space at offset 0x4 (was 0x0, writing 0x80084000)
May 28 23:56:51 [kernel] b43-pci-bridge 0001:10:12.0: restoring config space at offset 0x3 (was 0x0, writing 0x1000)
May 28 23:56:51 [kernel] b43-pci-bridge 0001:10:12.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
May 28 23:56:51 [kernel] ohci_hcd 0001:10:1b.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100002)
May 28 23:56:51 [kernel] ohci_hcd 0001:10:1b.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100002)
May 28 23:56:51 [kernel] ehci_hcd 0001:10:1b.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100012)
May 28 23:56:51 [kernel] radeonfb (0000:00:10.0): resuming from state: 2...
May 28 23:56:51 [kernel] agpgart-uninorth 0000:00:0b.0: putting AGP V2 device into 4x mode
May 28 23:56:51 [kernel] radeonfb 0000:00:10.0: putting AGP V2 device into 4x mode
May 28 23:56:51 [kernel] ohci_hcd 0001:10:1b.0: PME# disabled
- Last output repeated twice -
May 28 23:56:51 [kernel] ohci_hcd 0001:10:1b.1: PME# disabled
- Last output repeated twice -
May 28 23:56:51 [kernel] ehci_hcd 0001:10:1b.2: PME# disabled
- Last output repeated twice -
May 28 23:56:51 [kernel] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048] IR/IT contexts=[8/8]
May 28 23:56:51 [kernel] eth0: resuming
May 28 23:56:51 [kernel] PHY ID: 4061e4, addr: 0
May 28 23:56:51 [kernel] adb: starting probe task...
May 28 23:56:51 [kernel] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
May 28 23:56:51 [kernel] hda: UDMA/100 mode selected
May 28 23:56:51 [kernel] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
May 28 23:56:51 [kernel] hdc: MWDMA2 mode selected
May 28 23:56:51 [kernel] adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f
May 28 23:56:51 [kernel] ADB keyboard at 2, handler 1
May 28 23:56:51 [kernel] ADB mouse at 3, handler set to 4 (trackpad)
May 28 23:56:51 [kernel] adb: finished probe task...
May 28 23:56:51 [kernel] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
May 28 23:56:51 [kernel] Registered led device: b43-phy0::tx
May 28 23:56:51 [kernel] Registered led device: b43-phy0::rx
May 28 23:57:10 [kernel] Freezing user space processes ... (elapsed 0.00 seconds) done.
May 28 23:57:10 [kernel] Freezing remaining freezable tasks ... (elapsed 0.19 seconds) done.
May 28 23:57:10 [kernel] Suspending console(s) (use no_console_suspend to debug)
May 28 23:57:10 [kernel] ohci_hcd 0001:10:1a.0: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
May 28 23:57:10 [kernel] btusb_bulk_complete: hci0 urb ef875860 failed to resubmit (1)
May 28 23:57:10 [kernel] btusb_bulk_complete: hci0 urb ef8758e0 failed to resubmit (1)
May 28 23:57:10 [kernel] btusb_intr_complete: hci0 urb ef875ee0 failed to resubmit (1)
May 28 23:57:10 [kernel] eth0: suspending, WakeOnLan disabled
May 28 23:57:10 [kernel] ehci_hcd 0001:10:1b.2: PME# disabled
May 28 23:57:10 [kernel] ohci_hcd 0001:10:1b.1: PME# disabled
May 28 23:57:10 [kernel] ohci_hcd 0001:10:1b.0: PME# disabled
May 28 23:57:10 [kernel] radeonfb (0000:00:10.0): suspending for event: 2...
May 28 23:57:10 [kernel] agpgart-uninorth 0000:00:0b.0: disabling AGP on device 0000:00:10.0
May 28 23:57:10 [kernel] agpgart-uninorth 0000:00:0b.0: disabling AGP on bridge
May 28 23:57:10 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0xc (was 0x0, writing 0x90020001)
May 28 23:57:10 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x6 (was 0x0, writing 0x90000000)
May 28 23:57:10 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x5 (was 0x1, writing 0x401)
May 28 23:57:10 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x4 (was 0x8, writing 0x98000008)
May 28 23:57:10 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x3 (was 0x0, writing 0xff08)
May 28 23:57:10 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00007)
May 28 23:57:10 [kernel] b43-pci-bridge 0001:10:12.0: restoring config space at offset 0x4 (was 0x0, writing 0x80084000)
May 28 23:57:10 [kernel] b43-pci-bridge 0001:10:12.0: restoring config space at offset 0x3 (was 0x0, writing 0x1000)
May 28 23:57:10 [kernel] b43-pci-bridge 0001:10:12.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
May 28 23:57:10 [kernel] ohci_hcd 0001:10:1b.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100002)
May 28 23:57:10 [kernel] ohci_hcd 0001:10:1b.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100002)
May 28 23:57:10 [kernel] ehci_hcd 0001:10:1b.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100012)
May 28 23:57:10 [kernel] radeonfb (0000:00:10.0): resuming from state: 2...
May 28 23:57:10 [kernel] agpgart-uninorth 0000:00:0b.0: putting AGP V2 device into 4x mode
May 28 23:57:10 [kernel] radeonfb 0000:00:10.0: putting AGP V2 device into 4x mode
May 28 23:57:10 [kernel] ohci_hcd 0001:10:1b.0: PME# disabled
- Last output repeated twice -
May 28 23:57:10 [kernel] ohci_hcd 0001:10:1b.1: PME# disabled
- Last output repeated twice -
May 28 23:57:10 [kernel] ehci_hcd 0001:10:1b.2: PME# disabled
- Last output repeated twice -
May 28 23:57:10 [kernel] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048] IR/IT contexts=[8/8]
May 28 23:57:10 [kernel] eth0: resuming
May 28 23:57:10 [kernel] PHY ID: 4061e4, addr: 0
May 28 23:57:10 [kernel] adb: starting probe task...
May 28 23:57:10 [kernel] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
May 28 23:57:10 [kernel] hda: UDMA/100 mode selected
May 28 23:57:10 [kernel] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
May 28 23:57:10 [kernel] hdc: MWDMA2 mode selected
May 28 23:57:10 [kernel] adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f
May 28 23:57:10 [kernel] ADB keyboard at 2, handler 1
May 28 23:57:10 [kernel] ADB mouse at 3, handler set to 4 (trackpad)
May 28 23:57:10 [kernel] adb: finished probe task...
May 28 23:57:10 [kernel] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
May 28 23:57:10 [kernel] Registered led device: b43-phy0::tx
May 28 23:57:10 [kernel] Registered led device: b43-phy0::rx
May 28 23:57:35 [kernel] Freezing user space processes ... (elapsed 0.00 seconds) done.
May 28 23:57:35 [kernel] Freezing remaining freezable tasks ... (elapsed 1.82 seconds) done.
May 28 23:57:35 [kernel] Suspending console(s) (use no_console_suspend to debug)
May 28 23:57:35 [kernel] ohci_hcd 0001:10:1a.0: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
May 28 23:57:35 [kernel] btusb_bulk_complete: hci0 urb ef875b60 failed to resubmit (1)
May 28 23:57:35 [kernel] btusb_bulk_complete: hci0 urb ef875be0 failed to resubmit (1)
May 28 23:57:35 [kernel] btusb_intr_complete: hci0 urb ef875c60 failed to resubmit (1)
May 28 23:57:35 [kernel] eth0: suspending, WakeOnLan disabled
May 28 23:57:35 [kernel] ehci_hcd 0001:10:1b.2: PME# disabled
May 28 23:57:35 [kernel] ohci_hcd 0001:10:1b.1: PME# disabled
May 28 23:57:35 [kernel] ohci_hcd 0001:10:1b.0: PME# disabled
May 28 23:57:35 [kernel] radeonfb (0000:00:10.0): suspending for event: 2...
May 28 23:57:35 [kernel] agpgart-uninorth 0000:00:0b.0: disabling AGP on device 0000:00:10.0
May 28 23:57:35 [kernel] agpgart-uninorth 0000:00:0b.0: disabling AGP on bridge
May 28 23:57:35 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0xc (was 0x0, writing 0x90020001)
May 28 23:57:35 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x6 (was 0x0, writing 0x90000000)
May 28 23:57:35 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x5 (was 0x1, writing 0x401)
May 28 23:57:35 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x4 (was 0x8, writing 0x98000008)
May 28 23:57:35 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x3 (was 0x0, writing 0xff08)
May 28 23:57:35 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00007)
May 28 23:57:35 [kernel] b43-pci-bridge 0001:10:12.0: restoring config space at offset 0x4 (was 0x0, writing 0x80084000)
May 28 23:57:35 [kernel] b43-pci-bridge 0001:10:12.0: restoring config space at offset 0x3 (was 0x0, writing 0x1000)
May 28 23:57:35 [kernel] b43-pci-bridge 0001:10:12.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
May 28 23:57:35 [kernel] ohci_hcd 0001:10:1b.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100002)
May 28 23:57:35 [kernel] ohci_hcd 0001:10:1b.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100002)
May 28 23:57:35 [kernel] ehci_hcd 0001:10:1b.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100012)
May 28 23:57:35 [kernel] radeonfb (0000:00:10.0): resuming from state: 2...
May 28 23:57:35 [kernel] agpgart-uninorth 0000:00:0b.0: putting AGP V2 device into 4x mode
May 28 23:57:35 [kernel] radeonfb 0000:00:10.0: putting AGP V2 device into 4x mode
May 28 23:57:35 [kernel] ohci_hcd 0001:10:1b.0: PME# disabled
- Last output repeated twice -
May 28 23:57:35 [kernel] ohci_hcd 0001:10:1b.1: PME# disabled
- Last output repeated twice -
May 28 23:57:35 [kernel] ehci_hcd 0001:10:1b.2: PME# disabled
- Last output repeated twice -
May 28 23:57:35 [kernel] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048] IR/IT contexts=[8/8]
May 28 23:57:35 [kernel] eth0: resuming
May 28 23:57:35 [kernel] PHY ID: 4061e4, addr: 0
May 28 23:57:35 [kernel] adb: starting probe task...
May 28 23:57:35 [kernel] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
May 28 23:57:35 [kernel] hda: UDMA/100 mode selected
May 28 23:57:35 [kernel] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
May 28 23:57:35 [kernel] hdc: MWDMA2 mode selected
May 28 23:57:35 [kernel] adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f
May 28 23:57:35 [kernel] ADB keyboard at 2, handler 1
May 28 23:57:35 [kernel] ADB mouse at 3, handler set to 4 (trackpad)
May 28 23:57:35 [kernel] adb: finished probe task...
May 28 23:57:35 [kernel] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
May 28 23:57:35 [kernel] Registered led device: b43-phy0::tx
May 28 23:57:35 [kernel] Registered led device: b43-phy0::rx
May 28 23:57:51 [kernel] agpgart-uninorth 0000:00:0b.0: putting AGP V2 device into 4x mode
May 28 23:57:51 [kernel] radeonfb 0000:00:10.0: putting AGP V2 device into 4x mode
May 28 23:57:51 [kernel] [drm] Loading R200 Microcode
May 28 23:58:09 [kernel] Freezing user space processes ... (elapsed 0.00 seconds) done.
May 28 23:58:09 [kernel] Freezing remaining freezable tasks ... (elapsed 1.84 seconds) done.
May 28 23:58:09 [kernel] Suspending console(s) (use no_console_suspend to debug)
May 28 23:58:09 [kernel] ohci_hcd 0001:10:1a.0: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
May 28 23:58:09 [kernel] btusb_bulk_complete: hci0 urb ef8757e0 failed to resubmit (1)
May 28 23:58:09 [kernel] btusb_bulk_complete: hci0 urb ef875860 failed to resubmit (1)
May 28 23:58:09 [kernel] btusb_intr_complete: hci0 urb ef8758e0 failed to resubmit (1)
May 28 23:58:09 [kernel] eth0: suspending, WakeOnLan disabled
May 28 23:58:09 [kernel] ehci_hcd 0001:10:1b.2: PME# disabled
May 28 23:58:09 [kernel] ohci_hcd 0001:10:1b.1: PME# disabled
May 28 23:58:09 [kernel] ohci_hcd 0001:10:1b.0: PME# disabled
May 28 23:58:09 [kernel] radeonfb (0000:00:10.0): suspending for event: 2...
May 28 23:58:09 [kernel] agpgart-uninorth 0000:00:0b.0: disabling AGP on device 0000:00:10.0
May 28 23:58:09 [kernel] agpgart-uninorth 0000:00:0b.0: disabling AGP on bridge
May 28 23:58:09 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0xc (was 0x0, writing 0x90020001)
May 28 23:58:09 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x6 (was 0x0, writing 0x90000000)
May 28 23:58:09 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x5 (was 0x1, writing 0x401)
May 28 23:58:09 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x4 (was 0x8, writing 0x98000008)
May 28 23:58:09 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x3 (was 0x0, writing 0xff08)
May 28 23:58:09 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00007)
May 28 23:58:09 [kernel] b43-pci-bridge 0001:10:12.0: restoring config space at offset 0x4 (was 0x0, writing 0x80084000)
May 28 23:58:09 [kernel] b43-pci-bridge 0001:10:12.0: restoring config space at offset 0x3 (was 0x0, writing 0x1000)
May 28 23:58:09 [kernel] b43-pci-bridge 0001:10:12.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
May 28 23:58:09 [kernel] ohci_hcd 0001:10:1b.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100002)
May 28 23:58:09 [kernel] ohci_hcd 0001:10:1b.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100002)
May 28 23:58:09 [kernel] ehci_hcd 0001:10:1b.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100012)
May 28 23:58:09 [kernel] radeonfb (0000:00:10.0): resuming from state: 2...
May 28 23:58:09 [kernel] agpgart-uninorth 0000:00:0b.0: putting AGP V2 device into 4x mode
May 28 23:58:09 [kernel] radeonfb 0000:00:10.0: putting AGP V2 device into 4x mode
May 28 23:58:09 [kernel] ohci_hcd 0001:10:1b.0: PME# disabled
- Last output repeated twice -
May 28 23:58:09 [kernel] ohci_hcd 0001:10:1b.1: PME# disabled
- Last output repeated twice -
May 28 23:58:09 [kernel] ehci_hcd 0001:10:1b.2: PME# disabled
- Last output repeated twice -
May 28 23:58:09 [kernel] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048] IR/IT contexts=[8/8]
May 28 23:58:09 [kernel] eth0: resuming
May 28 23:58:09 [kernel] PHY ID: 4061e4, addr: 0
May 28 23:58:09 [kernel] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
May 28 23:58:09 [kernel] adb: starting probe task...
May 28 23:58:09 [kernel] hda: UDMA/100 mode selected
May 28 23:58:09 [kernel] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
May 28 23:58:09 [kernel] hdc: MWDMA2 mode selected
May 28 23:58:09 [kernel] adb devices: [2]: 2 c4 [7]: 7 1f
May 28 23:58:09 [kernel] ADB keyboard at 2, handler 1
May 28 23:58:09 [kernel] adb: finished probe task...
May 28 23:58:09 [kernel] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
May 28 23:58:09 [kernel] Registered led device: b43-phy0::tx
May 28 23:58:09 [kernel] Registered led device: b43-phy0::rx
May 28 23:58:10 [kernel] agpgart-uninorth 0000:00:0b.0: putting AGP V2 device into 4x mode
May 28 23:58:10 [kernel] radeonfb 0000:00:10.0: putting AGP V2 device into 4x mode
May 28 23:58:10 [kernel] [drm] Loading R200 MicrocodeQuoted 4 lines · Benjamin Herrenschmidt
Quoted 4 lines
We are too late in the cycle to revert this commit and it really is needed to fix a more serious issue. Nevertheless knowing that it caused the problem to appear on your system is also important.
Quoted 12 lines
Quoted 2 lines
Ben, do you have an idea what may be going on here? Does
__disable_irq()mask the interrupt on this platform?I suppose so :-) I'll have to check what's going on, it's not immediately clear to me.
Cheers,
Ben.Quoted 3 lines
I'd like to see a boot log, preferably containing a suspend-resume in which the problem was reproduced.
Here is a log from booting, through several suspend cycles, until the trackpad disappeared. The first few suspends were done while X was running but from the console. As you can tell from lines like
May 28 23:51:26 [kernel] adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f the trackpad was still present. The last suspend was done from within X, here the trackpad did not make it. May 28 23:58:09 [kernel] adb devices: [2]: 2 c4 [7]: 7 1f
However, there have been cases, although not in this log, were the trackpad has been alive even when suspending from within X.
Here's the log:
May 28 23:51:25 [kernel] nvram: XP partition at 0x1020
May 28 23:51:26 [kernel] nvram: NR partition at 0x1120
May 28 23:51:26 [kernel] Top of RAM: 0x50000000, Total RAM: 0x50000000
May 28 23:51:26 [kernel] Memory hole size: 0MB
May 28 23:51:26 [kernel] Zone PFN ranges:
May 28 23:51:26 [kernel] DMA 0x00000000 -> 0x00030000
May 28 23:51:26 [kernel] Normal 0x00030000 -> 0x00030000
May 28 23:51:26 [kernel] HighMem 0x00030000 -> 0x00050000
May 28 23:51:26 [kernel] Movable zone start PFN for each node
May 28 23:51:26 [kernel] early_node_map[1] active PFN ranges
May 28 23:51:26 [kernel] 0: 0x00000000 -> 0x00050000
May 28 23:51:26 [kernel] On node 0 totalpages: 327680
May 28 23:51:26 [kernel] free_area_init_node: node 0, pgdat c03eb2e8, node_mem_map c0425000
May 28 23:51:26 [kernel] DMA zone: 1536 pages used for memmap
May 28 23:51:26 [kernel] DMA zone: 0 pages reserved
May 28 23:51:26 [kernel] DMA zone: 195072 pages, LIFO batch:31
May 28 23:51:26 [kernel] HighMem zone: 1024 pages used for memmap
May 28 23:51:26 [kernel] HighMem zone: 130048 pages, LIFO batch:31
May 28 23:51:26 [kernel] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 325120
May 28 23:51:26 [kernel] Kernel command line: root=/dev/hda7 ro idebus=66
May 28 23:51:26 [kernel] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs
May 28 23:51:26 [kernel] mpic: ISU size: 64, shift: 6, mask: 3f
May 28 23:51:26 [kernel] mpic: Initializing for 64 sources
May 28 23:51:26 [kernel] PID hash table entries: 4096 (order: 12, 16384 bytes)
May 28 23:51:26 [kernel] GMT Delta read from XPRAM: 0 minutes, DST: off
May 28 23:51:26 [kernel] time_init: decrementer frequency = 18.432000 MHz
May 28 23:51:26 [kernel] time_init: processor frequency = 1199.999997 MHz
May 28 23:51:26 [kernel] clocksource: timebase mult[d9038e4] shift[22] registered
May 28 23:51:26 [kernel] clockevent: decrementer mult[4b7] shift[16] cpu[0]
May 28 23:51:26 [kernel] Console: colour dummy device 80x25
May 28 23:51:26 [kernel] console handover: boot [udbg0] -> real [tty0]
May 28 23:51:26 [kernel] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
May 28 23:51:26 [kernel] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
May 28 23:51:26 [kernel] High memory: 524288k
May 28 23:51:26 [kernel] Memory: 1289860k/1310720k available (3860k kernel code, 19728k reserved, 160k data, 135k bss, 188k init)
May 28 23:51:26 [kernel] Calibrating delay loop... 36.32 BogoMIPS (lpj=61312)
May 28 23:51:26 [kernel] Mount-cache hash table entries: 512
May 28 23:51:26 [kernel] device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1"
May 28 23:51:26 [kernel] net_namespace: 936 bytes
May 28 23:51:26 [kernel] NET: Registered protocol family 16
May 28 23:51:26 [kernel] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
May 28 23:51:26 [kernel] channel 0 bus <multibus>
May 28 23:51:26 [kernel] channel 1 bus <multibus>
May 28 23:51:26 [kernel] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
May 28 23:51:26 [kernel] channel 0 bus <multibus>
May 28 23:51:26 [kernel] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c
May 28 23:51:26 [kernel] channel 1 bus <multibus>
May 28 23:51:26 [kernel] channel 2 bus <multibus>
May 28 23:51:26 [kernel] PCI: Probing PCI hardware
May 28 23:51:26 [kernel] pci 0000:00:10.0: reg 10 32bit mmio: [0x98000000-0x9fffffff]
May 28 23:51:26 [kernel] pci 0000:00:10.0: reg 14 io port: [0x400-0x4ff]
May 28 23:51:26 [kernel] pci 0000:00:10.0: reg 18 32bit mmio: [0x90000000-0x9000ffff]
May 28 23:51:26 [kernel] pci 0000:00:10.0: reg 30 32bit mmio: [0x90020000-0x9003ffff]
May 28 23:51:26 [kernel] pci 0000:00:10.0: supports D1 D2
May 28 23:51:26 [kernel] pci 0001:10:12.0: reg 10 32bit mmio: [0x80084000-0x80085fff]
May 28 23:51:26 [kernel] pci 0001:10:12.0: supports D1 D2
May 28 23:51:26 [kernel] pci 0001:10:12.0: PME# supported from D0 D1 D2 D3hot D3cold
May 28 23:51:26 [kernel] pci 0001:10:12.0: PME# disabled
May 28 23:51:26 [kernel] pci 0001:10:17.0: reg 10 32bit mmio: [0x80000000-0x8007ffff]
May 28 23:51:26 [kernel] pci 0001:10:18.0: reg 10 32bit mmio: [0x000000-0x000fff]
May 28 23:51:26 [kernel] pci 0001:10:19.0: reg 10 32bit mmio: [0x000000-0x000fff]
May 28 23:51:26 [kernel] pci 0001:10:1a.0: reg 10 32bit mmio: [0x80083000-0x80083fff]
May 28 23:51:26 [kernel] pci 0001:10:1b.0: reg 10 32bit mmio: [0x80082000-0x80082fff]
May 28 23:51:26 [kernel] pci 0001:10:1b.0: supports D1 D2
May 28 23:51:26 [kernel] pci 0001:10:1b.0: PME# supported from D0 D1 D2 D3hot D3cold
May 28 23:51:26 [kernel] pci 0001:10:1b.0: PME# disabled
May 28 23:51:26 [kernel] pci 0001:10:1b.1: reg 10 32bit mmio: [0x80081000-0x80081fff]
May 28 23:51:26 [kernel] pci 0001:10:1b.1: supports D1 D2
May 28 23:51:26 [kernel] pci 0001:10:1b.1: PME# supported from D0 D1 D2 D3hot D3cold
May 28 23:51:26 [kernel] pci 0001:10:1b.1: PME# disabled
May 28 23:51:26 [kernel] pci 0001:10:1b.2: reg 10 32bit mmio: [0x80080000-0x800800ff]
May 28 23:51:26 [kernel] pci 0001:10:1b.2: supports D1 D2
May 28 23:51:26 [kernel] pci 0001:10:1b.2: PME# supported from D0 D1 D2 D3hot D3cold
May 28 23:51:26 [kernel] pci 0001:10:1b.2: PME# disabled
May 28 23:51:26 [kernel] pci 0002:20:0d.0: reg 10 32bit mmio: [0xf5004000-0xf5007fff]
May 28 23:51:26 [kernel] pci 0002:20:0e.0: reg 10 32bit mmio: [0xf5000000-0xf5000fff]
May 28 23:51:26 [kernel] pci 0002:20:0e.0: supports D1 D2
May 28 23:51:26 [kernel] pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot
May 28 23:51:26 [kernel] pci 0002:20:0e.0: PME# disabled
May 28 23:51:26 [kernel] pci 0002:20:0f.0: reg 10 32bit mmio: [0xf5200000-0xf53fffff]
May 28 23:51:26 [kernel] pci 0002:20:0f.0: reg 30 32bit mmio: [0xf5100000-0xf51fffff]
May 28 23:51:26 [kernel] PCI 0000:00 Cannot reserve Legacy IO [0x802000-0x802fff]
May 28 23:51:26 [kernel] pci_bus 0001:10: resource 0 io: [0x00-0x7fffff]
May 28 23:51:26 [kernel] pci_bus 0001:10: resource 1 mem: [0xf3000000-0xf3ffffff]
May 28 23:51:26 [kernel] pci_bus 0001:10: resource 2 mem: [0x80000000-0x8fffffff]
May 28 23:51:26 [kernel] pci_bus 0002:20: resource 0 io: [0xff7fe000-0xffffdfff]
May 28 23:51:26 [kernel] pci_bus 0002:20: resource 1 mem: [0xf5000000-0xf5ffffff]
May 28 23:51:26 [kernel] bio: create slab <bio-0> at 0
May 28 23:51:26 [kernel] NET: Registered protocol family 2
May 28 23:51:26 [kernel] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
May 28 23:51:26 [kernel] Switched to NOHz mode on CPU #0
May 28 23:51:26 [kernel] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
May 28 23:51:26 [kernel] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
May 28 23:51:26 [kernel] TCP: Hash tables configured (established 131072 bind 65536)
May 28 23:51:26 [kernel] TCP reno registered
May 28 23:51:26 [kernel] NET: Registered protocol family 1
May 28 23:51:26 [kernel] Thermal assist unit not available
May 28 23:51:26 [kernel] setup_kcore: restrict size=3fffffff
May 28 23:51:26 [kernel] Registering PowerMac CPU frequency driver
May 28 23:51:26 [kernel] Low: 599 Mhz, High: 1199 Mhz, Boot: 599 Mhz
May 28 23:51:26 [kernel] highmem bounce pool size: 64 pages
May 28 23:51:26 [kernel] msgmni has been set to 1497
May 28 23:51:26 [kernel] alg: No test for stdrng (krng)
May 28 23:51:26 [kernel] io scheduler noop registered
May 28 23:51:26 [kernel] io scheduler anticipatory registered (default)
May 28 23:51:26 [kernel] io scheduler deadline registered
May 28 23:51:26 [kernel] io scheduler cfq registered
May 28 23:51:26 [kernel] radeonfb 0000:00:10.0: enabling device (0006 -> 0007)
May 28 23:51:26 [kernel] radeonfb 0000:00:10.0: Invalid ROM contents
May 28 23:51:26 [kernel] radeonfb (0000:00:10.0): Invalid ROM signature 0 should be 0xaa55
May 28 23:51:26 [kernel] radeonfb: Retrieved PLL infos from Open Firmware
May 28 23:51:26 [kernel] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=190.00 Mhz, System=183.00 MHz
May 28 23:51:26 [kernel] radeonfb: PLL min 12000 max 35000
May 28 23:51:26 [kernel] i2c-adapter i2c-2: unable to read EDID block.
- Last output repeated 2 times -
May 28 23:51:26 [kernel] i2c-adapter i2c-3: unable to read EDID block.
- Last output repeated 2 times -
May 28 23:51:26 [kernel] radeonfb: Monitor 1 type LCD found
May 28 23:51:26 [kernel] radeonfb: EDID probed
May 28 23:51:26 [kernel] radeonfb: Monitor 2 type no found
May 28 23:51:26 [kernel] radeonfb: Using Firmware dividers 0x000600ad from PPLL 0
May 28 23:51:26 [kernel] radeonfb: Dynamic Clock Power Management enabled
May 28 23:51:26 [kernel] Console: switching to colour frame buffer device 128x48
May 28 23:51:26 [kernel] radeonfb: Backlight initialized (radeonbl0)
May 28 23:51:26 [kernel] radeonfb (0000:00:10.0): ATI Radeon 5c63 "\c"
May 28 23:51:26 [kernel] Generic non-volatile memory driver v1.1
May 28 23:51:26 [kernel] Linux agpgart interface v0.103
May 28 23:51:26 [kernel] agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset
May 28 23:51:26 [kernel] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 8
May 28 23:51:26 [kernel] agpgart-uninorth 0000:00:0b.0: AGP aperture is 32M @ 0x0
May 28 23:51:26 [kernel] [drm] Initialized drm 1.1.0 20060810
May 28 23:51:26 [kernel] [drm] Initialized radeon 1.29.0 20080528 on minor 0
May 28 23:51:26 [kernel] loop: module loaded
May 28 23:51:26 [kernel] sungem.c:v0.98 8/24/03 David S. Miller ([email protected])
May 28 23:51:26 [kernel] PHY ID: 4061e4, addr: 0
May 28 23:51:26 [kernel] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0d:93:4b:d6:8c
May 28 23:51:26 [kernel] eth0: Found BCM5221 PHY
May 28 23:51:26 [kernel] MacIO PCI driver attached to Intrepid chipset
May 28 23:51:26 [kernel] input: Macintosh mouse button emulation as /devices/virtual/input/input0
May 28 23:51:26 [kernel] Uniform Multi-Platform E-IDE driver
May 28 23:51:26 [kernel] adb: starting probe task...
May 28 23:51:26 [kernel] ide-pmac 0002:20:0d.0: enabling device (0000 -> 0002)
May 28 23:51:26 [kernel] adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f
May 28 23:51:26 [kernel] ADB keyboard at 2, handler 1
May 28 23:51:26 [kernel] Detected ADB keyboard, type ISO, swapping keys.
May 28 23:51:26 [kernel] input: ADB keyboard as /devices/virtual/input/input1
May 28 23:51:26 [kernel] input: ADB Powerbook buttons as /devices/virtual/input/input2
May 28 23:51:26 [kernel] ADB mouse at 3, handler set to 4 (trackpad)
May 28 23:51:26 [kernel] input: ADB mouse as /devices/virtual/input/input3
May 28 23:51:26 [kernel] adb: finished probe task...
May 28 23:51:26 [kernel] ide-pmac: Found Apple UniNorth ATA-6 controller (PCI), bus ID 3, irq 39
May 28 23:51:26 [kernel] Probing IDE interface ide0...
May 28 23:51:26 [kernel] hda: FUJITSU MHT2030AT, ATA DISK drive
May 28 23:51:26 [kernel] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
May 28 23:51:26 [kernel] hda: UDMA/100 mode selected
May 28 23:51:26 [kernel] ide0 at 0xf103a000-0xf103a070,0xf103a160 on irq 39
May 28 23:51:26 [kernel] ide-pmac: Found Apple KeyLargo ATA-3 controller (macio), bus ID 0, irq 24
May 28 23:51:26 [kernel] Probing IDE interface ide1...
May 28 23:51:26 [kernel] hdc: MATSHITACD-RW CW-8123, ATAPI CD/DVD-ROM drive
May 28 23:51:26 [kernel] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
May 28 23:51:26 [kernel] hdc: MWDMA2 mode selected
May 28 23:51:26 [kernel] ide1 at 0xf101a000-0xf101a070,0xf101a160 on irq 24
May 28 23:51:26 [kernel] ide-gd driver 1.18
May 28 23:51:26 [kernel] hda: max request size: 512KiB
May 28 23:51:26 [kernel] hda: 58605120 sectors (30005 MB) w/2048KiB Cache, CHS=16383/255/63
May 28 23:51:26 [kernel] ide-cd driver 5.00
May 28 23:51:26 [kernel] ide-cd: hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
May 28 23:51:26 [kernel] Uniform CD-ROM driver Revision: 3.20
May 28 23:51:26 [kernel] mice: PS/2 mouse device common for all mice
May 28 23:51:26 [kernel] i2c /dev entries driver
May 28 23:51:26 [kernel] TCP cubic registered
May 28 23:51:26 [kernel] NET: Registered protocol family 17
May 28 23:51:26 [kernel] input: PMU as /devices/virtual/input/input4
May 28 23:51:26 [kernel] Registered led device: pmu-front-led
May 28 23:51:26 [kernel] ReiserFS: hda7: found reiserfs format "3.6" with standard journal
May 28 23:51:26 [kernel] ReiserFS: hda7: using ordered data mode
May 28 23:51:26 [kernel] ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
May 28 23:51:26 [kernel] ReiserFS: hda7: checking transaction log (hda7)
May 28 23:51:26 [kernel] ReiserFS: hda7: Using r5 hash to sort names
May 28 23:51:26 [kernel] VFS: Mounted root (reiserfs filesystem) readonly on device 3:7.
May 28 23:51:26 [kernel] Freeing unused kernel memory: 188k init
May 28 23:51:26 [kernel] b43-pci-bridge 0001:10:12.0: enabling device (0004 -> 0006)
May 28 23:51:26 [kernel] ssb: Sonics Silicon Backplane found on PCI device 0001:10:12.0
May 28 23:51:26 [kernel] usbcore: registered new interface driver usbfs
May 28 23:51:26 [kernel] usbcore: registered new interface driver hub
May 28 23:51:26 [kernel] usbcore: registered new device driver usb
May 28 23:51:26 [kernel] PowerMac i2c bus pmu 2 registered
May 28 23:51:26 [kernel] PowerMac i2c bus pmu 1 registered
May 28 23:51:26 [kernel] PowerMac i2c bus mac-io 0 registered
May 28 23:51:26 [kernel] PowerMac i2c bus uni-n 1 registered
May 28 23:51:26 [kernel] PowerMac i2c bus uni-n 0 registered
May 28 23:51:26 [kernel] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
May 28 23:51:26 [kernel] Apple USB OHCI 0001:10:18.0 disabled by firmware
May 28 23:51:26 [kernel] Apple USB OHCI 0001:10:19.0 disabled by firmware
May 28 23:51:26 [kernel] ohci_hcd 0001:10:1a.0: enabling device (0000 -> 0002)
May 28 23:51:26 [kernel] ohci_hcd 0001:10:1a.0: OHCI Host Controller
May 28 23:51:26 [kernel] ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 1
May 28 23:51:26 [kernel] ohci_hcd 0001:10:1a.0: irq 29, io mem 0x80083000
May 28 23:51:26 [kernel] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
May 28 23:51:26 [kernel] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
May 28 23:51:26 [kernel] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
May 28 23:51:26 [kernel] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 28 23:51:26 [kernel] usb usb1: Product: OHCI Host Controller
May 28 23:51:26 [kernel] usb usb1: Manufacturer: Linux 2.6.29.4-00028-g6575141 ohci_hcd
May 28 23:51:26 [kernel] usb usb1: SerialNumber: 0001:10:1a.0
May 28 23:51:26 [kernel] usb usb1: configuration #1 chosen from 1 choice
May 28 23:51:26 [kernel] hub 1-0:1.0: USB hub found
May 28 23:51:26 [kernel] hub 1-0:1.0: 2 ports detected
May 28 23:51:26 [kernel] ehci_hcd 0001:10:1b.2: enabling device (0004 -> 0006)
May 28 23:51:26 [kernel] ehci_hcd 0001:10:1b.2: EHCI Host Controller
May 28 23:51:26 [kernel] ehci_hcd 0001:10:1b.2: new USB bus registered, assigned bus number 2
May 28 23:51:26 [kernel] ehci_hcd 0001:10:1b.2: irq 63, io mem 0x80080000
May 28 23:51:26 [kernel] ehci_hcd 0001:10:1b.2: USB 2.0 started, EHCI 1.00
May 28 23:51:26 [kernel] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
May 28 23:51:26 [kernel] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 28 23:51:26 [kernel] usb usb2: Product: EHCI Host Controller
May 28 23:51:26 [kernel] usb usb2: Manufacturer: Linux 2.6.29.4-00028-g6575141 ehci_hcd
May 28 23:51:26 [kernel] usb usb2: SerialNumber: 0001:10:1b.2
May 28 23:51:26 [kernel] usb usb2: configuration #1 chosen from 1 choice
May 28 23:51:26 [kernel] hub 2-0:1.0: USB hub found
May 28 23:51:26 [kernel] hub 2-0:1.0: 5 ports detected
May 28 23:51:26 [kernel] ohci_hcd 0001:10:1b.0: enabling device (0000 -> 0002)
May 28 23:51:26 [kernel] ohci_hcd 0001:10:1b.0: OHCI Host Controller
May 28 23:51:26 [kernel] ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus number 3
May 28 23:51:26 [kernel] ohci_hcd 0001:10:1b.0: irq 63, io mem 0x80082000
May 28 23:51:26 [kernel] ohci1394 0002:20:0e.0: enabling device (0000 -> 0002)
May 28 23:51:26 [kernel] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048] IR/IT contexts=[8/8]
May 28 23:51:26 [kernel] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
May 28 23:51:26 [kernel] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 28 23:51:26 [kernel] usb usb3: Product: OHCI Host Controller
May 28 23:51:26 [kernel] usb usb3: Manufacturer: Linux 2.6.29.4-00028-g6575141 ohci_hcd
May 28 23:51:26 [kernel] usb usb3: SerialNumber: 0001:10:1b.0
May 28 23:51:26 [kernel] usb usb3: configuration #1 chosen from 1 choice
May 28 23:51:26 [kernel] hub 3-0:1.0: USB hub found
May 28 23:51:26 [kernel] hub 3-0:1.0: 3 ports detected
May 28 23:51:26 [kernel] ohci_hcd 0001:10:1b.1: enabling device (0000 -> 0002)
May 28 23:51:26 [kernel] ohci_hcd 0001:10:1b.1: OHCI Host Controller
May 28 23:51:26 [kernel] ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 4
May 28 23:51:26 [kernel] ohci_hcd 0001:10:1b.1: irq 63, io mem 0x80081000
May 28 23:51:26 [kernel] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
May 28 23:51:26 [kernel] usb usb4: Product: OHCI Host Controller
May 28 23:51:26 [kernel] usb usb4: SerialNumber: 0001:10:1b.1
May 28 23:51:26 [kernel] usb usb4: configuration #1 chosen from 1 choice
May 28 23:51:26 [kernel] hub 4-0:1.0: USB hub found
May 28 23:51:26 [kernel] hub 4-0:1.0: 2 ports detected
May 28 23:51:26 [kernel] usb 1-1: new full speed USB device using ohci_hcd and address 2
May 28 23:51:26 [kernel] usb 1-1: New USB device found, idVendor=05ac, idProduct=1000
May 28 23:51:26 [kernel] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
May 28 23:51:26 [kernel] usb 1-1: configuration #1 chosen from 1 choice
May 28 23:51:26 [kernel] usb 2-2: new high speed USB device using ehci_hcd and address 2
May 28 23:51:26 [kernel] usb 2-2: New USB device found, idVendor=04b4, idProduct=6830
May 28 23:51:26 [kernel] usb 2-2: New USB device strings: Mfr=56, Product=58, SerialNumber=60
May 28 23:51:26 [kernel] usb 2-2: Product:
May 28 23:51:26 [kernel] usb 2-2: Manufacturer:
May 28 23:51:26 [kernel] usb 2-2: SerialNumber: D
May 28 23:51:26 [kernel] usb 2-2: configuration #1 chosen from 1 choice
May 28 23:51:26 [kernel] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000d93fffe4bd68c]
May 28 23:51:26 [kernel] cfg80211: Using static regulatory domain info
May 28 23:51:26 [kernel] cfg80211: Regulatory domain: US
May 28 23:51:26 [kernel] _(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
May 28 23:51:26 [kernel] _(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
May 28 23:51:26 [kernel] _(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
May 28 23:51:26 [kernel] _(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
May 28 23:51:26 [kernel] _(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
May 28 23:51:26 [kernel] _(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
May 28 23:51:26 [kernel] _(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
May 28 23:51:26 [kernel] cfg80211: Calling CRDA for country: US
May 28 23:51:26 [kernel] b43-phy0: Broadcom 4306 WLAN found
May 28 23:51:26 [kernel] wmaster0 (b43): not using net_device_ops yet
May 28 23:51:26 [kernel] phy0: Selected rate control algorithm 'minstrel'
May 28 23:51:26 [kernel] wlan0 (b43): not using net_device_ops yet
May 28 23:51:26 [kernel] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ]
May 28 23:51:26 [kernel] udev: renamed network interface wmaster0 to eth1
May 28 23:51:26 [kernel] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb1/1-1/1-1:1.0/input/input5
May 28 23:51:26 [kernel] generic-usb 0003:05AC:1000.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0001:10:1a.0-1/input0
May 28 23:51:26 [kernel] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb1/1-1/1-1:1.1/input/input6
May 28 23:51:26 [kernel] generic-usb 0003:05AC:1000.0002: input,hidraw1: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0001:10:1a.0-1/input1
May 28 23:51:26 [kernel] usbcore: registered new interface driver usbhid
May 28 23:51:26 [kernel] usbhid: v2.6:USB HID core driver
May 28 23:51:26 [kernel] SCSI subsystem initialized
May 28 23:51:26 [kernel] Initializing USB Mass Storage driver...
May 28 23:51:26 [kernel] scsi0 : SCSI emulation for USB Mass Storage devices
May 28 23:51:26 [kernel] usbcore: registered new interface driver usb-storage
May 28 23:51:26 [kernel] USB Mass Storage support registered.
May 28 23:51:26 [kernel] usb-storage: device found at 2
May 28 23:51:26 [kernel] usb-storage: waiting for device to settle before scanning
May 28 23:51:26 [kernel] adt746x: version 1 (supported)
May 28 23:51:26 [kernel] adt746x: Thermostat bus: 1, address: 0x2e, limit_adjust: 0, fan_speed: -1
May 28 23:51:26 [kernel] sensor 0: PWR/MEMORY BOTTOMSIDE
May 28 23:51:26 [kernel] sensor 1: CPU BOTTOMSIDE
May 28 23:51:26 [kernel] sensor 2: GPU BOTTOMSIDE
May 28 23:51:26 [kernel] adt746x: ADT7467 initializing
May 28 23:51:26 [kernel] adt746x: Lowering max temperatures from 69, 92, 101 to 70, 50, 70
May 28 23:51:26 [kernel] platform ppc-rtc.0: rtc core: registered ppc_md as rtc0
May 28 23:51:26 [kernel] input: PowerMac Beep as /devices/pci0001:10/0001:10:17.0/input/input7
May 28 23:51:26 [kernel] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [email protected]
May 28 23:51:26 [kernel] scsi 0:0:0:0: Direct-Access WDC WD16 00BEVE-11UYT0 0000 PQ: 0 ANSI: 0
May 28 23:51:26 [kernel] usb-storage: device scan complete
May 28 23:51:26 [kernel] Driver 'sd' needs updating - please use bus_type methods
May 28 23:51:26 [kernel] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
May 28 23:51:26 [kernel] sd 0:0:0:0: [sda] Write Protect is off
May 28 23:51:26 [kernel] sd 0:0:0:0: [sda] Mode Sense: 27 00 00 00
May 28 23:51:26 [kernel] sd 0:0:0:0: [sda] Assuming drive cache: write through
May 28 23:51:26 [kernel] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
May 28 23:51:26 [kernel] sd 0:0:0:0: [sda] Write Protect is off
May 28 23:51:26 [kernel] sd 0:0:0:0: [sda] Mode Sense: 27 00 00 00
May 28 23:51:26 [kernel] sd 0:0:0:0: [sda] Assuming drive cache: write through
May 28 23:51:26 [kernel] sda: sda1
May 28 23:51:26 [kernel] sd 0:0:0:0: [sda] Attached SCSI disk
May 28 23:51:26 [kernel] sd 0:0:0:0: Attached scsi generic sg0 type 0
May 28 23:51:26 [kernel] Adding 1048568k swap on /dev/hda6. Priority:-1 extents:1 across:1048568k
May 28 23:51:29 [kernel] ip_tables: (C) 2000-2006 Netfilter Core Team
May 28 23:51:31 [kernel] NET: Registered protocol family 10
May 28 23:51:31 [kernel] ADDRCONF(NETDEV_UP): eth0: link is not ready
May 28 23:51:31 [kernel] ip6_tables: (C) 2000-2006 Netfilter Core Team
May 28 23:51:33 [kernel] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
May 28 23:51:34 [kernel] Bluetooth: Core ver 2.14
May 28 23:51:34 [kernel] NET: Registered protocol family 31
May 28 23:51:34 [kernel] Bluetooth: HCI device and connection manager initialized
May 28 23:51:34 [kernel] Bluetooth: HCI socket layer initialized
May 28 23:51:35 [kernel] usb 1-1: USB disconnect, address 2
May 28 23:51:35 [kernel] usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -108
May 28 23:51:35 [kernel] usb 1-1: new full speed USB device using ohci_hcd and address 3
May 28 23:51:36 [kernel] usb 1-1: New USB device found, idVendor=05ac, idProduct=8203
May 28 23:51:36 [kernel] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
May 28 23:51:36 [kernel] usb 1-1: configuration #1 chosen from 1 choice
May 28 23:51:36 [kernel] Bluetooth: Generic Bluetooth USB driver ver 0.4
May 28 23:51:36 [kernel] usbcore: registered new interface driver btusb
May 28 23:51:37 [kernel] Bluetooth: L2CAP ver 2.11
May 28 23:51:37 [kernel] Bluetooth: L2CAP socket layer initialized
May 28 23:51:37 [kernel] Bluetooth: RFCOMM socket layer initialized
May 28 23:51:37 [kernel] Bluetooth: RFCOMM TTY layer initialized
May 28 23:51:37 [kernel] Bluetooth: RFCOMM ver 1.10
May 28 23:51:40 [kernel] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
May 28 23:51:40 [kernel] Bluetooth: BNEP filters: protocol multicast
May 28 23:51:58 [kernel] b43 ssb0:0: firmware: requesting b43/ucode5.fw
May 28 23:51:58 [kernel] b43 ssb0:0: firmware: requesting b43/pcm5.fw
May 28 23:51:59 [kernel] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
May 28 23:51:59 [kernel] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
May 28 23:51:59 [kernel] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
May 28 23:51:59 [kernel] Registered led device: b43-phy0::tx
May 28 23:51:59 [kernel] Registered led device: b43-phy0::rx
May 28 23:51:59 [kernel] b43-phy0: Radio turned on by software
May 28 23:51:59 [kernel] ADDRCONF(NETDEV_UP): wlan0: link is not ready
May 28 23:52:11 [kernel] radeonfb 0000:00:10.0: Invalid ROM contents
- Last output repeated twice -
May 28 23:52:11 [kernel] agpgart-uninorth 0000:00:0b.0: putting AGP V2 device into 4x mode
May 28 23:52:11 [kernel] radeonfb 0000:00:10.0: putting AGP V2 device into 4x mode
May 28 23:52:12 [kernel] [drm] Setting GART location based on new memory map
May 28 23:52:12 [kernel] [drm] Loading R200 Microcode
May 28 23:52:12 [kernel] [drm] writeback test succeeded in 1 usecs
May 28 23:52:59 [kernel] ADDRCONF(NETDEV_UP): eth0: link is not ready
May 28 23:54:47 [kernel] GMT Delta read from XPRAM: 0 minutes, DST: off
May 28 23:54:47 [kernel] time_init: decrementer frequency = 18.432000 MHz
May 28 23:54:47 [kernel] time_init: processor frequency = 1199.999997 MHz
May 28 23:54:47 [kernel] clocksource: timebase mult[d9038e4] shift[22] registered
May 28 23:54:47 [kernel] clockevent: decrementer mult[4b7] shift[16] cpu[0]
May 28 23:54:47 [kernel] Console: colour dummy device 80x25
May 28 23:54:47 [kernel] console handover: boot [udbg0] -> real [tty0]
May 28 23:54:47 [kernel] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
May 28 23:54:47 [kernel] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
May 28 23:54:47 [kernel] High memory: 524288k
May 28 23:54:47 [kernel] Memory: 1289604k/1310720k available (4092k kernel code, 19972k reserved, 180k data, 130k bss, 176k init)
May 28 23:54:47 [kernel] Calibrating delay loop... 36.32 BogoMIPS (lpj=61312)
May 28 23:54:47 [kernel] Mount-cache hash table entries: 512
May 28 23:54:47 [kernel] device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1"
May 28 23:54:47 [kernel] net_namespace: 936 bytes
May 28 23:54:47 [kernel] NET: Registered protocol family 16
May 28 23:54:47 [kernel] irq: irq 42 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 42
May 28 23:54:47 [kernel] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
May 28 23:54:47 [kernel] channel 0 bus <multibus>
May 28 23:54:47 [kernel] channel 1 bus <multibus>
May 28 23:54:47 [kernel] irq: irq 26 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 26
May 28 23:54:47 [kernel] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
May 28 23:54:47 [kernel] channel 0 bus <multibus>
May 28 23:54:47 [kernel] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c
May 28 23:54:47 [kernel] channel 1 bus <multibus>
May 28 23:54:47 [kernel] channel 2 bus <multibus>
May 28 23:54:47 [kernel] irq: irq 25 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 25
May 28 23:54:47 [kernel] irq: irq 47 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 47
May 28 23:54:47 [kernel] PCI: Probing PCI hardware
May 28 23:54:47 [kernel] pci 0000:00:10.0: reg 10 32bit mmio: [0x98000000-0x9fffffff]
May 28 23:54:47 [kernel] pci 0000:00:10.0: reg 14 io port: [0x400-0x4ff]
May 28 23:54:47 [kernel] pci 0000:00:10.0: reg 18 32bit mmio: [0x90000000-0x9000ffff]
May 28 23:54:47 [kernel] pci 0000:00:10.0: reg 30 32bit mmio: [0x90020000-0x9003ffff]
May 28 23:54:47 [kernel] pci 0000:00:10.0: supports D1 D2
May 28 23:54:47 [kernel] irq: irq 48 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 48
May 28 23:54:47 [kernel] pci 0001:10:12.0: reg 10 32bit mmio: [0x80084000-0x80085fff]
May 28 23:54:47 [kernel] pci 0001:10:12.0: supports D1 D2
May 28 23:54:47 [kernel] pci 0001:10:12.0: PME# supported from D0 D1 D2 D3hot D3cold
May 28 23:54:47 [kernel] pci 0001:10:12.0: PME# disabled
May 28 23:54:47 [kernel] pci 0001:10:17.0: reg 10 32bit mmio: [0x80000000-0x8007ffff]
May 28 23:54:47 [kernel] pci 0001:10:18.0: reg 10 32bit mmio: [0x000000-0x000fff]
May 28 23:54:47 [kernel] pci 0001:10:19.0: reg 10 32bit mmio: [0x000000-0x000fff]
May 28 23:54:47 [kernel] pci 0001:10:1a.0: reg 10 32bit mmio: [0x80083000-0x80083fff]
May 28 23:54:47 [kernel] pci 0001:10:1b.0: reg 10 32bit mmio: [0x80082000-0x80082fff]
May 28 23:54:47 [kernel] pci 0001:10:1b.0: supports D1 D2
May 28 23:54:47 [kernel] pci 0001:10:1b.0: PME# supported from D0 D1 D2 D3hot D3cold
May 28 23:54:47 [kernel] pci 0001:10:1b.0: PME# disabled
May 28 23:54:47 [kernel] pci 0001:10:1b.1: reg 10 32bit mmio: [0x80081000-0x80081fff]
May 28 23:54:47 [kernel] pci 0001:10:1b.1: supports D1 D2
May 28 23:54:47 [kernel] pci 0001:10:1b.1: PME# supported from D0 D1 D2 D3hot D3cold
May 28 23:54:47 [kernel] pci 0001:10:1b.1: PME# disabled
May 28 23:54:47 [kernel] pci 0001:10:1b.2: reg 10 32bit mmio: [0x80080000-0x800800ff]
May 28 23:54:47 [kernel] pci 0001:10:1b.2: supports D1 D2
May 28 23:54:47 [kernel] pci 0001:10:1b.2: PME# supported from D0 D1 D2 D3hot D3cold
May 28 23:54:47 [kernel] pci 0001:10:1b.2: PME# disabled
May 28 23:54:47 [kernel] irq: irq 52 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 52
May 28 23:54:47 [kernel] irq: irq 27 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 27
May 28 23:54:47 [kernel] irq: irq 28 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 28
May 28 23:54:47 [kernel] irq: irq 29 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 29
May 28 23:54:47 [kernel] irq: irq 63 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 63
May 28 23:54:47 [kernel] pci 0002:20:0d.0: reg 10 32bit mmio: [0xf5004000-0xf5007fff]
May 28 23:54:47 [kernel] pci 0002:20:0e.0: reg 10 32bit mmio: [0xf5000000-0xf5000fff]
May 28 23:54:47 [kernel] pci 0002:20:0e.0: supports D1 D2
May 28 23:54:47 [kernel] pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot
May 28 23:54:47 [kernel] pci 0002:20:0e.0: PME# disabled
May 28 23:54:47 [kernel] pci 0002:20:0f.0: reg 10 32bit mmio: [0xf5200000-0xf53fffff]
May 28 23:54:47 [kernel] pci 0002:20:0f.0: reg 30 32bit mmio: [0xf5100000-0xf51fffff]
May 28 23:54:47 [kernel] irq: irq 39 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 39
May 28 23:54:47 [kernel] PCI 0000:00 Cannot reserve Legacy IO [0x802000-0x802fff]
May 28 23:54:47 [kernel] pci_bus 0000:00: resource 0 io: [0x802000-0x1001fff]
May 28 23:54:47 [kernel] pci_bus 0000:00: resource 1 mem: [0xf1000000-0xf1ffffff]
May 28 23:54:47 [kernel] pci_bus 0000:00: resource 2 mem: [0x90000000-0x9fffffff]
May 28 23:54:47 [kernel] pci_bus 0001:10: resource 0 io: [0x00-0x7fffff]
May 28 23:54:47 [kernel] pci_bus 0001:10: resource 1 mem: [0xf3000000-0xf3ffffff]
May 28 23:54:47 [kernel] pci_bus 0001:10: resource 2 mem: [0x80000000-0x8fffffff]
May 28 23:54:47 [kernel] pci_bus 0002:20: resource 0 io: [0xff7fe000-0xffffdfff]
May 28 23:54:47 [kernel] pci_bus 0002:20: resource 1 mem: [0xf5000000-0xf5ffffff]
May 28 23:54:47 [kernel] bio: create slab <bio-0> at 0
May 28 23:54:47 [kernel] Switched to NOHz mode on CPU #0
May 28 23:54:47 [kernel] NET: Registered protocol family 2
May 28 23:54:47 [kernel] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
May 28 23:54:47 [kernel] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
May 28 23:54:47 [kernel] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
May 28 23:54:47 [kernel] TCP: Hash tables configured (established 131072 bind 65536)
May 28 23:54:47 [kernel] TCP reno registered
May 28 23:54:47 [kernel] NET: Registered protocol family 1
May 28 23:54:47 [kernel] Thermal assist unit not available
May 28 23:54:47 [kernel] setup_kcore: restrict size=3fffffff
May 28 23:54:47 [kernel] Registering PowerMac CPU frequency driver
May 28 23:54:47 [kernel] Low: 599 Mhz, High: 1199 Mhz, Boot: 599 Mhz
May 28 23:54:47 [kernel] highmem bounce pool size: 64 pages
May 28 23:54:47 [kernel] msgmni has been set to 1496
May 28 23:54:47 [kernel] alg: No test for stdrng (krng)
May 28 23:54:47 [kernel] io scheduler noop registered
May 28 23:54:47 [kernel] io scheduler anticipatory registered (default)
May 28 23:54:47 [kernel] io scheduler deadline registered
May 28 23:54:47 [kernel] io scheduler cfq registered
May 28 23:54:47 [kernel] radeonfb 0000:00:10.0: enabling device (0006 -> 0007)
May 28 23:54:47 [kernel] radeonfb 0000:00:10.0: Invalid ROM contents
May 28 23:54:47 [kernel] radeonfb (0000:00:10.0): Invalid ROM signature 0 should be 0xaa55
May 28 23:54:47 [kernel] radeonfb: Retrieved PLL infos from Open Firmware
May 28 23:54:47 [kernel] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=190.00 Mhz, System=183.00 MHz
May 28 23:54:47 [kernel] radeonfb: PLL min 12000 max 35000
May 28 23:54:47 [kernel] i2c-adapter i2c-2: unable to read EDID block.
- Last output repeated 2 times -
May 28 23:54:47 [kernel] i2c-adapter i2c-3: unable to read EDID block.
- Last output repeated 2 times -
May 28 23:54:48 [kernel] radeonfb: Monitor 1 type LCD found
May 28 23:54:48 [kernel] radeonfb: EDID probed
May 28 23:54:48 [kernel] radeonfb: Monitor 2 type no found
May 28 23:54:48 [kernel] radeonfb: Using Firmware dividers 0x000600ad from PPLL 0
May 28 23:54:48 [kernel] radeonfb: Dynamic Clock Power Management enabled
May 28 23:54:48 [kernel] Console: switching to colour frame buffer device 128x48
May 28 23:54:48 [kernel] radeonfb: Backlight initialized (radeonbl0)
May 28 23:54:48 [kernel] radeonfb (0000:00:10.0): ATI Radeon 5c63 "\c"
May 28 23:54:48 [kernel] Generic non-volatile memory driver v1.1
May 28 23:54:48 [kernel] Linux agpgart interface v0.103
May 28 23:54:48 [kernel] agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset
May 28 23:54:48 [kernel] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 8
May 28 23:54:48 [kernel] agpgart-uninorth 0000:00:0b.0: AGP aperture is 32M @ 0x0
May 28 23:54:48 [kernel] [drm] Initialized drm 1.1.0 20060810
May 28 23:54:48 [kernel] [drm] Initialized radeon 1.30.0 20080528 for 0000:00:10.0 on minor 0
May 28 23:54:48 [kernel] loop: module loaded
May 28 23:54:48 [kernel] MacIO PCI driver attached to Intrepid chipset
May 28 23:54:48 [kernel] irq: irq 32 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 32
May 28 23:54:48 [kernel] irq: irq 24 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 24
May 28 23:54:48 [kernel] irq: irq 12 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 16
May 28 23:54:48 [kernel] irq: irq 22 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 22
May 28 23:54:48 [kernel] irq: irq 5 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 17
May 28 23:54:48 [kernel] irq: irq 6 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 18
May 28 23:54:48 [kernel] irq: irq 23 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 23
May 28 23:54:48 [kernel] irq: irq 7 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 19
May 28 23:54:48 [kernel] irq: irq 8 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 20
May 28 23:54:48 [kernel] input: Macintosh mouse button emulation as /devices/virtual/input/input0
May 28 23:54:48 [kernel] Uniform Multi-Platform E-IDE driver
May 28 23:54:48 [kernel] adb: starting probe task...
May 28 23:54:48 [kernel] ide-pmac 0002:20:0d.0: enabling device (0000 -> 0002)
May 28 23:54:48 [kernel] adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f
May 28 23:54:48 [kernel] ADB keyboard at 2, handler 1
May 28 23:54:48 [kernel] Detected ADB keyboard, type ISO, swapping keys.
May 28 23:54:48 [kernel] input: ADB Powerbook buttons as /devices/virtual/input/input2
May 28 23:54:48 [kernel] ADB mouse at 3, handler set to 4 (trackpad)
May 28 23:54:48 [kernel] input: ADB mouse as /devices/virtual/input/input3
May 28 23:54:48 [kernel] adb: finished probe task...
May 28 23:54:48 [kernel] ide-pmac: Found Apple UniNorth ATA-6 controller (PCI), bus ID 3, irq 39
May 28 23:54:48 [kernel] Probing IDE interface ide0...
May 28 23:54:48 [kernel] hda: FUJITSU MHT2030AT, ATA DISK drive
May 28 23:54:48 [kernel] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
May 28 23:54:48 [kernel] hda: UDMA/100 mode selected
May 28 23:54:48 [kernel] ide0 at 0xf103a000-0xf103a070,0xf103a160 on irq 39
May 28 23:54:48 [kernel] ide-pmac: Found Apple KeyLargo ATA-3 controller (macio), bus ID 0, irq 24
May 28 23:54:48 [kernel] Probing IDE interface ide1...
May 28 23:54:48 [kernel] hdc: MATSHITACD-RW CW-8123, ATAPI CD/DVD-ROM drive
May 28 23:54:48 [kernel] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
May 28 23:54:48 [kernel] hdc: MWDMA2 mode selected
May 28 23:54:48 [kernel] ide1 at 0xf101a000-0xf101a070,0xf101a160 on irq 24
May 28 23:54:48 [kernel] ide-gd driver 1.18
May 28 23:54:48 [kernel] hda: max request size: 512KiB
May 28 23:54:48 [kernel] hda: 58605120 sectors (30005 MB) w/2048KiB Cache, CHS=16383/255/63
May 28 23:54:48 [kernel] hda: cache flushes supported
May 28 23:54:48 [kernel] hda: [mac] hda1 hda2 hda3 hda4 hda5 hda6 hda7 hda8 hda9
May 28 23:54:48 [kernel] ide-cd driver 5.00
May 28 23:54:48 [kernel] ide-cd: hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
May 28 23:54:48 [kernel] Uniform CD-ROM driver Revision: 3.20
May 28 23:54:48 [kernel] sungem.c:v0.98 8/24/03 David S. Miller ([email protected])
May 28 23:54:48 [kernel] PHY ID: 4061e4, addr: 0
May 28 23:54:48 [kernel] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0d:93:4b:d6:8c
May 28 23:54:48 [kernel] eth0: Found BCM5221 PHY
May 28 23:54:48 [kernel] mice: PS/2 mouse device common for all mice
May 28 23:54:48 [kernel] i2c /dev entries driver
May 28 23:54:48 [kernel] TCP cubic registered
May 28 23:54:48 [kernel] NET: Registered protocol family 17
May 28 23:54:48 [kernel] input: PMU as /devices/virtual/input/input4
May 28 23:54:48 [kernel] Registered led device: pmu-front-led
May 28 23:54:48 [kernel] REISERFS (device hda7): found reiserfs format "3.6" with standard journal
May 28 23:54:48 [kernel] REISERFS (device hda7): using ordered data mode
May 28 23:54:48 [kernel] REISERFS (device hda7): journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
May 28 23:54:48 [kernel] REISERFS (device hda7): checking transaction log (hda7)
May 28 23:54:48 [kernel] REISERFS (device hda7): Using r5 hash to sort names
May 28 23:54:48 [kernel] VFS: Mounted root (reiserfs filesystem) readonly on device 3:7.
May 28 23:54:48 [kernel] Freeing unused kernel memory: 176k init
May 28 23:54:48 [kernel] b43-pci-bridge 0001:10:12.0: enabling device (0004 -> 0006)
May 28 23:54:48 [kernel] ssb: Sonics Silicon Backplane found on PCI device 0001:10:12.0
May 28 23:54:48 [kernel] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
May 28 23:54:48 [kernel] usbcore: registered new interface driver usbfs
May 28 23:54:48 [kernel] usbcore: registered new interface driver hub
May 28 23:54:48 [kernel] usbcore: registered new device driver usb
May 28 23:54:48 [kernel] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
May 28 23:54:48 [kernel] Apple USB OHCI 0001:10:18.0 disabled by firmware
May 28 23:54:48 [kernel] Apple USB OHCI 0001:10:19.0 disabled by firmware
May 28 23:54:48 [kernel] ohci_hcd 0001:10:1a.0: enabling device (0000 -> 0002)
May 28 23:54:48 [kernel] ohci_hcd 0001:10:1a.0: OHCI Host Controller
May 28 23:54:48 [kernel] ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 1
May 28 23:54:48 [kernel] ohci_hcd 0001:10:1a.0: irq 29, io mem 0x80083000
May 28 23:54:48 [kernel] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
May 28 23:54:48 [kernel] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
May 28 23:54:48 [kernel] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
May 28 23:54:48 [kernel] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 28 23:54:48 [kernel] usb usb1: Product: OHCI Host Controller
May 28 23:54:48 [kernel] usb usb1: Manufacturer: Linux 2.6.30-rc7 ohci_hcd
May 28 23:54:48 [kernel] usb usb1: SerialNumber: 0001:10:1a.0
May 28 23:54:48 [kernel] usb usb1: configuration #1 chosen from 1 choice
May 28 23:54:48 [kernel] hub 1-0:1.0: USB hub found
May 28 23:54:48 [kernel] hub 1-0:1.0: 2 ports detected
May 28 23:54:48 [kernel] ehci_hcd 0001:10:1b.2: enabling device (0004 -> 0006)
May 28 23:54:48 [kernel] ehci_hcd 0001:10:1b.2: EHCI Host Controller
May 28 23:54:48 [kernel] ehci_hcd 0001:10:1b.2: new USB bus registered, assigned bus number 2
May 28 23:54:48 [kernel] ehci_hcd 0001:10:1b.2: irq 63, io mem 0x80080000
May 28 23:54:48 [kernel] ehci_hcd 0001:10:1b.2: USB 2.0 started, EHCI 1.00
May 28 23:54:48 [kernel] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
May 28 23:54:48 [kernel] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 28 23:54:48 [kernel] usb usb2: Product: EHCI Host Controller
May 28 23:54:48 [kernel] usb usb2: Manufacturer: Linux 2.6.30-rc7 ehci_hcd
May 28 23:54:48 [kernel] usb usb2: SerialNumber: 0001:10:1b.2
May 28 23:54:48 [kernel] usb usb2: configuration #1 chosen from 1 choice
May 28 23:54:48 [kernel] hub 2-0:1.0: USB hub found
May 28 23:54:48 [kernel] hub 2-0:1.0: 5 ports detected
May 28 23:54:48 [kernel] ohci_hcd 0001:10:1b.0: OHCI Host Controller
May 28 23:54:48 [kernel] ohci_hcd 0001:10:1b.0: irq 63, io mem 0x80082000
May 28 23:54:48 [kernel] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
May 28 23:54:48 [kernel] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 28 23:54:48 [kernel] usb usb3: Product: OHCI Host Controller
May 28 23:54:48 [kernel] usb usb3: Manufacturer: Linux 2.6.30-rc7 ohci_hcd
May 28 23:54:48 [kernel] usb usb3: SerialNumber: 0001:10:1b.0
May 28 23:54:48 [kernel] usb usb3: configuration #1 chosen from 1 choice
May 28 23:54:48 [kernel] hub 3-0:1.0: USB hub found
May 28 23:54:48 [kernel] hub 3-0:1.0: 3 ports detected
May 28 23:54:48 [kernel] ohci_hcd 0001:10:1b.1: enabling device (0000 -> 0002)
May 28 23:54:48 [kernel] ohci_hcd 0001:10:1b.1: OHCI Host Controller
May 28 23:54:48 [kernel] ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 4
May 28 23:54:48 [kernel] ohci_hcd 0001:10:1b.1: irq 63, io mem 0x80081000
May 28 23:54:48 [kernel] PowerMac i2c bus pmu 2 registered
May 28 23:54:48 [kernel] PowerMac i2c bus pmu 1 registered
May 28 23:54:48 [kernel] PowerMac i2c bus mac-io 0 registered
May 28 23:54:48 [kernel] PowerMac i2c bus uni-n 1 registered
May 28 23:54:48 [kernel] PowerMac i2c bus uni-n 0 registered
May 28 23:54:48 [kernel] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
May 28 23:54:48 [kernel] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 28 23:54:48 [kernel] usb usb4: Product: OHCI Host Controller
May 28 23:54:48 [kernel] usb usb4: Manufacturer: Linux 2.6.30-rc7 ohci_hcd
May 28 23:54:48 [kernel] usb usb4: SerialNumber: 0001:10:1b.1
May 28 23:54:48 [kernel] usb usb4: configuration #1 chosen from 1 choice
May 28 23:54:48 [kernel] hub 4-0:1.0: USB hub found
May 28 23:54:48 [kernel] hub 4-0:1.0: 2 ports detected
May 28 23:54:48 [kernel] usb 1-1: new full speed USB device using ohci_hcd and address 2
May 28 23:54:48 [kernel] ohci1394 0002:20:0e.0: enabling device (0000 -> 0002)
May 28 23:54:48 [kernel] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048] IR/IT contexts=[8/8]
May 28 23:54:48 [kernel] usb 1-1: New USB device found, idVendor=05ac, idProduct=1000
May 28 23:54:48 [kernel] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
May 28 23:54:48 [kernel] usb 1-1: configuration #1 chosen from 1 choice
May 28 23:54:48 [kernel] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000d93fffe4bd68c]
May 28 23:54:48 [kernel] cfg80211: Using static regulatory domain info
May 28 23:54:48 [kernel] cfg80211: Regulatory domain: US
May 28 23:54:48 [kernel] _(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
May 28 23:54:48 [kernel] _(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
May 28 23:54:48 [kernel] _(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
May 28 23:54:48 [kernel] _(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
May 28 23:54:48 [kernel] _(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
May 28 23:54:48 [kernel] _(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
May 28 23:54:48 [kernel] _(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
May 28 23:54:48 [kernel] cfg80211: Calling CRDA for country: US
May 28 23:54:48 [kernel] b43-phy0: Broadcom 4306 WLAN found (core revision 5)
May 28 23:54:48 [kernel] phy0: Selected rate control algorithm 'minstrel'
May 28 23:54:48 [kernel] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ]
May 28 23:54:48 [kernel] udev: renamed network interface wmaster0 to eth1
May 28 23:54:48 [kernel] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb1/1-1/1-1:1.0/input/input5
May 28 23:54:48 [kernel] generic-usb 0003:05AC:1000.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0001:10:1a.0-1/input0
May 28 23:54:48 [kernel] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb1/1-1/1-1:1.1/input/input6
May 28 23:54:48 [kernel] generic-usb 0003:05AC:1000.0002: input,hidraw1: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0001:10:1a.0-1/input1
May 28 23:54:48 [kernel] usbcore: registered new interface driver usbhid
May 28 23:54:48 [kernel] usbhid: v2.6:USB HID core driver
May 28 23:54:48 [kernel] adt746x: version 1 (supported)
May 28 23:54:48 [kernel] adt746x: Thermostat bus: 1, address: 0x2e, limit_adjust: 0, fan_speed: -1
May 28 23:54:48 [kernel] sensor 0: PWR/MEMORY BOTTOMSIDE
May 28 23:54:48 [kernel] sensor 1: CPU BOTTOMSIDE
May 28 23:54:48 [kernel] sensor 2: GPU BOTTOMSIDE
May 28 23:54:48 [kernel] adt746x: ADT7467 initializing
May 28 23:54:48 [kernel] adt746x: Lowering max temperatures from 69, 92, 101 to 70, 50, 70
May 28 23:54:48 [kernel] irq: irq 1 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 21
May 28 23:54:48 [kernel] irq: irq 2 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 30
May 28 23:54:48 [kernel] irq: irq 61 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 61
May 28 23:54:48 [kernel] input: PowerMac Beep as /devices/pci0001:10/0001:10:17.0/input/input7
May 28 23:54:48 [kernel] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [email protected]
May 28 23:54:48 [kernel] Adding 1048568k swap on /dev/hda6. Priority:-1 extents:1 across:1048568k
May 28 23:54:52 [kernel] NET: Registered protocol family 10
May 28 23:54:52 [kernel] ip_tables: (C) 2000-2006 Netfilter Core Team
May 28 23:54:52 [kernel] ADDRCONF(NETDEV_UP): eth0: link is not ready
May 28 23:54:53 [kernel] ip6_tables: (C) 2000-2006 Netfilter Core Team
May 28 23:54:55 [kernel] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
May 28 23:54:56 [kernel] Bluetooth: Core ver 2.15
May 28 23:54:56 [kernel] NET: Registered protocol family 31
May 28 23:54:56 [kernel] Bluetooth: HCI device and connection manager initialized
May 28 23:54:56 [kernel] Bluetooth: HCI socket layer initialized
May 28 23:54:56 [kernel] usb 1-1: USB disconnect, address 2
May 28 23:54:56 [kernel] usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -108
May 28 23:54:57 [kernel] usb 1-1: new full speed USB device using ohci_hcd and address 3
May 28 23:54:57 [kernel] usb 1-1: New USB device found, idVendor=05ac, idProduct=8203
May 28 23:54:57 [kernel] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
May 28 23:54:57 [kernel] usb 1-1: configuration #1 chosen from 1 choice
May 28 23:54:57 [kernel] Bluetooth: Generic Bluetooth USB driver ver 0.5
May 28 23:54:57 [kernel] usbcore: registered new interface driver btusb
May 28 23:54:58 [kernel] Bluetooth: L2CAP ver 2.13
May 28 23:54:58 [kernel] Bluetooth: L2CAP socket layer initialized
May 28 23:54:59 [kernel] Bluetooth: RFCOMM socket layer initialized
May 28 23:54:59 [kernel] Bluetooth: RFCOMM TTY layer initialized
May 28 23:54:59 [kernel] Bluetooth: RFCOMM ver 1.11
May 28 23:55:01 [kernel] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
May 28 23:55:01 [kernel] Bluetooth: BNEP filters: protocol multicast
May 28 23:55:19 [kernel] b43 ssb0:0: firmware: requesting b43/ucode5.fw
May 28 23:55:19 [kernel] b43 ssb0:0: firmware: requesting b43/pcm5.fw
May 28 23:55:19 [kernel] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
May 28 23:55:20 [kernel] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
May 28 23:55:20 [kernel] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
May 28 23:55:20 [kernel] Registered led device: b43-phy0::tx
May 28 23:55:20 [kernel] Registered led device: b43-phy0::rx
May 28 23:55:20 [kernel] b43-phy0: Radio turned on by software
May 28 23:55:20 [kernel] ADDRCONF(NETDEV_UP): wlan0: link is not ready
May 28 23:55:31 [kernel] radeonfb 0000:00:10.0: Invalid ROM contents
- Last output repeated twice -
May 28 23:55:31 [kernel] agpgart-uninorth 0000:00:0b.0: putting AGP V2 device into 4x mode
May 28 23:55:31 [kernel] radeonfb 0000:00:10.0: putting AGP V2 device into 4x mode
May 28 23:55:32 [kernel] [drm] Setting GART location based on new memory map
May 28 23:55:32 [kernel] [drm] Loading R200 Microcode
May 28 23:55:32 [kernel] [drm] writeback test succeeded in 1 usecs
May 28 23:56:30 [kernel] Freezing user space processes ... (elapsed 0.00 seconds) done.
May 28 23:56:30 [kernel] Freezing remaining freezable tasks ... (elapsed 1.12 seconds) done.
May 28 23:56:30 [kernel] Suspending console(s) (use no_console_suspend to debug)
May 28 23:56:30 [kernel] btusb_bulk_complete: hci0 urb ef2d9560 failed to resubmit (1)
May 28 23:56:30 [kernel] btusb_bulk_complete: hci0 urb ef1ef4c0 failed to resubmit (1)
May 28 23:56:30 [kernel] btusb_intr_complete: hci0 urb ef1ef440 failed to resubmit (1)
May 28 23:56:30 [kernel] eth0: suspending, WakeOnLan disabled
May 28 23:56:30 [kernel] ehci_hcd 0001:10:1b.2: PME# disabled
May 28 23:56:30 [kernel] ohci_hcd 0001:10:1b.1: PME# disabled
May 28 23:56:30 [kernel] ohci_hcd 0001:10:1b.0: PME# disabled
May 28 23:56:30 [kernel] radeonfb (0000:00:10.0): suspending for event: 2...
May 28 23:56:30 [kernel] agpgart-uninorth 0000:00:0b.0: disabling AGP on device 0000:00:10.0
May 28 23:56:30 [kernel] agpgart-uninorth 0000:00:0b.0: disabling AGP on bridge
May 28 23:56:30 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0xc (was 0x0, writing 0x90020001)
May 28 23:56:30 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x6 (was 0x0, writing 0x90000000)
May 28 23:56:30 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x5 (was 0x1, writing 0x401)
May 28 23:56:30 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x4 (was 0x8, writing 0x98000008)
May 28 23:56:30 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x3 (was 0x0, writing 0xff08)
May 28 23:56:30 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00007)
May 28 23:56:30 [kernel] b43-pci-bridge 0001:10:12.0: restoring config space at offset 0x4 (was 0x0, writing 0x80084000)
May 28 23:56:30 [kernel] b43-pci-bridge 0001:10:12.0: restoring config space at offset 0x3 (was 0x0, writing 0x1000)
May 28 23:56:30 [kernel] b43-pci-bridge 0001:10:12.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
May 28 23:56:30 [kernel] ohci_hcd 0001:10:1b.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100002)
May 28 23:56:30 [kernel] ohci_hcd 0001:10:1b.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100002)
May 28 23:56:30 [kernel] ehci_hcd 0001:10:1b.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100012)
May 28 23:56:30 [kernel] radeonfb (0000:00:10.0): resuming from state: 2...
May 28 23:56:30 [kernel] agpgart-uninorth 0000:00:0b.0: putting AGP V2 device into 4x mode
May 28 23:56:30 [kernel] radeonfb 0000:00:10.0: putting AGP V2 device into 4x mode
May 28 23:56:30 [kernel] ohci_hcd 0001:10:1b.0: PME# disabled
- Last output repeated twice -
May 28 23:56:30 [kernel] ohci_hcd 0001:10:1b.1: PME# disabled
- Last output repeated twice -
May 28 23:56:30 [kernel] ehci_hcd 0001:10:1b.2: PME# disabled
- Last output repeated twice -
May 28 23:56:30 [kernel] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048] IR/IT contexts=[8/8]
May 28 23:56:30 [kernel] eth0: resuming
May 28 23:56:30 [kernel] PHY ID: 4061e4, addr: 0
May 28 23:56:30 [kernel] adb: starting probe task...
May 28 23:56:30 [kernel] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
May 28 23:56:30 [kernel] hda: UDMA/100 mode selected
May 28 23:56:30 [kernel] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
May 28 23:56:30 [kernel] hdc: MWDMA2 mode selected
May 28 23:56:30 [kernel] adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f
May 28 23:56:30 [kernel] ADB keyboard at 2, handler 1
May 28 23:56:30 [kernel] ADB mouse at 3, handler set to 4 (trackpad)
May 28 23:56:30 [kernel] adb: finished probe task...
May 28 23:56:30 [kernel] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
May 28 23:56:30 [kernel] Registered led device: b43-phy0::tx
May 28 23:56:30 [kernel] Registered led device: b43-phy0::rx
May 28 23:56:51 [kernel] Freezing user space processes ... (elapsed 0.00 seconds) done.
May 28 23:56:51 [kernel] Freezing remaining freezable tasks ... (elapsed 0.25 seconds) done.
May 28 23:56:51 [kernel] Suspending console(s) (use no_console_suspend to debug)
May 28 23:56:51 [kernel] ohci_hcd 0001:10:1a.0: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
May 28 23:56:51 [kernel] btusb_bulk_complete: hci0 urb ef875ae0 failed to resubmit (1)
May 28 23:56:51 [kernel] btusb_bulk_complete: hci0 urb ef875b60 failed to resubmit (1)
May 28 23:56:51 [kernel] btusb_intr_complete: hci0 urb ef875be0 failed to resubmit (1)
May 28 23:56:51 [kernel] eth0: suspending, WakeOnLan disabled
May 28 23:56:51 [kernel] ehci_hcd 0001:10:1b.2: PME# disabled
May 28 23:56:51 [kernel] ohci_hcd 0001:10:1b.1: PME# disabled
May 28 23:56:51 [kernel] ohci_hcd 0001:10:1b.0: PME# disabled
May 28 23:56:51 [kernel] radeonfb (0000:00:10.0): suspending for event: 2...
May 28 23:56:51 [kernel] agpgart-uninorth 0000:00:0b.0: disabling AGP on device 0000:00:10.0
May 28 23:56:51 [kernel] agpgart-uninorth 0000:00:0b.0: disabling AGP on bridge
May 28 23:56:51 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0xc (was 0x0, writing 0x90020001)
May 28 23:56:51 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x6 (was 0x0, writing 0x90000000)
May 28 23:56:51 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x5 (was 0x1, writing 0x401)
May 28 23:56:51 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x4 (was 0x8, writing 0x98000008)
May 28 23:56:51 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x3 (was 0x0, writing 0xff08)
May 28 23:56:51 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00007)
May 28 23:56:51 [kernel] b43-pci-bridge 0001:10:12.0: restoring config space at offset 0x4 (was 0x0, writing 0x80084000)
May 28 23:56:51 [kernel] b43-pci-bridge 0001:10:12.0: restoring config space at offset 0x3 (was 0x0, writing 0x1000)
May 28 23:56:51 [kernel] b43-pci-bridge 0001:10:12.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
May 28 23:56:51 [kernel] ohci_hcd 0001:10:1b.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100002)
May 28 23:56:51 [kernel] ohci_hcd 0001:10:1b.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100002)
May 28 23:56:51 [kernel] ehci_hcd 0001:10:1b.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100012)
May 28 23:56:51 [kernel] radeonfb (0000:00:10.0): resuming from state: 2...
May 28 23:56:51 [kernel] agpgart-uninorth 0000:00:0b.0: putting AGP V2 device into 4x mode
May 28 23:56:51 [kernel] radeonfb 0000:00:10.0: putting AGP V2 device into 4x mode
May 28 23:56:51 [kernel] ohci_hcd 0001:10:1b.0: PME# disabled
- Last output repeated twice -
May 28 23:56:51 [kernel] ohci_hcd 0001:10:1b.1: PME# disabled
- Last output repeated twice -
May 28 23:56:51 [kernel] ehci_hcd 0001:10:1b.2: PME# disabled
- Last output repeated twice -
May 28 23:56:51 [kernel] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048] IR/IT contexts=[8/8]
May 28 23:56:51 [kernel] eth0: resuming
May 28 23:56:51 [kernel] PHY ID: 4061e4, addr: 0
May 28 23:56:51 [kernel] adb: starting probe task...
May 28 23:56:51 [kernel] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
May 28 23:56:51 [kernel] hda: UDMA/100 mode selected
May 28 23:56:51 [kernel] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
May 28 23:56:51 [kernel] hdc: MWDMA2 mode selected
May 28 23:56:51 [kernel] adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f
May 28 23:56:51 [kernel] ADB keyboard at 2, handler 1
May 28 23:56:51 [kernel] ADB mouse at 3, handler set to 4 (trackpad)
May 28 23:56:51 [kernel] adb: finished probe task...
May 28 23:56:51 [kernel] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
May 28 23:56:51 [kernel] Registered led device: b43-phy0::tx
May 28 23:56:51 [kernel] Registered led device: b43-phy0::rx
May 28 23:57:10 [kernel] Freezing user space processes ... (elapsed 0.00 seconds) done.
May 28 23:57:10 [kernel] Freezing remaining freezable tasks ... (elapsed 0.19 seconds) done.
May 28 23:57:10 [kernel] Suspending console(s) (use no_console_suspend to debug)
May 28 23:57:10 [kernel] ohci_hcd 0001:10:1a.0: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
May 28 23:57:10 [kernel] btusb_bulk_complete: hci0 urb ef875860 failed to resubmit (1)
May 28 23:57:10 [kernel] btusb_bulk_complete: hci0 urb ef8758e0 failed to resubmit (1)
May 28 23:57:10 [kernel] btusb_intr_complete: hci0 urb ef875ee0 failed to resubmit (1)
May 28 23:57:10 [kernel] eth0: suspending, WakeOnLan disabled
May 28 23:57:10 [kernel] ehci_hcd 0001:10:1b.2: PME# disabled
May 28 23:57:10 [kernel] ohci_hcd 0001:10:1b.1: PME# disabled
May 28 23:57:10 [kernel] ohci_hcd 0001:10:1b.0: PME# disabled
May 28 23:57:10 [kernel] radeonfb (0000:00:10.0): suspending for event: 2...
May 28 23:57:10 [kernel] agpgart-uninorth 0000:00:0b.0: disabling AGP on device 0000:00:10.0
May 28 23:57:10 [kernel] agpgart-uninorth 0000:00:0b.0: disabling AGP on bridge
May 28 23:57:10 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0xc (was 0x0, writing 0x90020001)
May 28 23:57:10 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x6 (was 0x0, writing 0x90000000)
May 28 23:57:10 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x5 (was 0x1, writing 0x401)
May 28 23:57:10 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x4 (was 0x8, writing 0x98000008)
May 28 23:57:10 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x3 (was 0x0, writing 0xff08)
May 28 23:57:10 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00007)
May 28 23:57:10 [kernel] b43-pci-bridge 0001:10:12.0: restoring config space at offset 0x4 (was 0x0, writing 0x80084000)
May 28 23:57:10 [kernel] b43-pci-bridge 0001:10:12.0: restoring config space at offset 0x3 (was 0x0, writing 0x1000)
May 28 23:57:10 [kernel] b43-pci-bridge 0001:10:12.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
May 28 23:57:10 [kernel] ohci_hcd 0001:10:1b.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100002)
May 28 23:57:10 [kernel] ohci_hcd 0001:10:1b.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100002)
May 28 23:57:10 [kernel] ehci_hcd 0001:10:1b.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100012)
May 28 23:57:10 [kernel] radeonfb (0000:00:10.0): resuming from state: 2...
May 28 23:57:10 [kernel] agpgart-uninorth 0000:00:0b.0: putting AGP V2 device into 4x mode
May 28 23:57:10 [kernel] radeonfb 0000:00:10.0: putting AGP V2 device into 4x mode
May 28 23:57:10 [kernel] ohci_hcd 0001:10:1b.0: PME# disabled
- Last output repeated twice -
May 28 23:57:10 [kernel] ohci_hcd 0001:10:1b.1: PME# disabled
- Last output repeated twice -
May 28 23:57:10 [kernel] ehci_hcd 0001:10:1b.2: PME# disabled
- Last output repeated twice -
May 28 23:57:10 [kernel] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048] IR/IT contexts=[8/8]
May 28 23:57:10 [kernel] eth0: resuming
May 28 23:57:10 [kernel] PHY ID: 4061e4, addr: 0
May 28 23:57:10 [kernel] adb: starting probe task...
May 28 23:57:10 [kernel] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
May 28 23:57:10 [kernel] hda: UDMA/100 mode selected
May 28 23:57:10 [kernel] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
May 28 23:57:10 [kernel] hdc: MWDMA2 mode selected
May 28 23:57:10 [kernel] adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f
May 28 23:57:10 [kernel] ADB keyboard at 2, handler 1
May 28 23:57:10 [kernel] ADB mouse at 3, handler set to 4 (trackpad)
May 28 23:57:10 [kernel] adb: finished probe task...
May 28 23:57:10 [kernel] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
May 28 23:57:10 [kernel] Registered led device: b43-phy0::tx
May 28 23:57:10 [kernel] Registered led device: b43-phy0::rx
May 28 23:57:35 [kernel] Freezing user space processes ... (elapsed 0.00 seconds) done.
May 28 23:57:35 [kernel] Freezing remaining freezable tasks ... (elapsed 1.82 seconds) done.
May 28 23:57:35 [kernel] Suspending console(s) (use no_console_suspend to debug)
May 28 23:57:35 [kernel] ohci_hcd 0001:10:1a.0: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
May 28 23:57:35 [kernel] btusb_bulk_complete: hci0 urb ef875b60 failed to resubmit (1)
May 28 23:57:35 [kernel] btusb_bulk_complete: hci0 urb ef875be0 failed to resubmit (1)
May 28 23:57:35 [kernel] btusb_intr_complete: hci0 urb ef875c60 failed to resubmit (1)
May 28 23:57:35 [kernel] eth0: suspending, WakeOnLan disabled
May 28 23:57:35 [kernel] ehci_hcd 0001:10:1b.2: PME# disabled
May 28 23:57:35 [kernel] ohci_hcd 0001:10:1b.1: PME# disabled
May 28 23:57:35 [kernel] ohci_hcd 0001:10:1b.0: PME# disabled
May 28 23:57:35 [kernel] radeonfb (0000:00:10.0): suspending for event: 2...
May 28 23:57:35 [kernel] agpgart-uninorth 0000:00:0b.0: disabling AGP on device 0000:00:10.0
May 28 23:57:35 [kernel] agpgart-uninorth 0000:00:0b.0: disabling AGP on bridge
May 28 23:57:35 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0xc (was 0x0, writing 0x90020001)
May 28 23:57:35 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x6 (was 0x0, writing 0x90000000)
May 28 23:57:35 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x5 (was 0x1, writing 0x401)
May 28 23:57:35 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x4 (was 0x8, writing 0x98000008)
May 28 23:57:35 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x3 (was 0x0, writing 0xff08)
May 28 23:57:35 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00007)
May 28 23:57:35 [kernel] b43-pci-bridge 0001:10:12.0: restoring config space at offset 0x4 (was 0x0, writing 0x80084000)
May 28 23:57:35 [kernel] b43-pci-bridge 0001:10:12.0: restoring config space at offset 0x3 (was 0x0, writing 0x1000)
May 28 23:57:35 [kernel] b43-pci-bridge 0001:10:12.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
May 28 23:57:35 [kernel] ohci_hcd 0001:10:1b.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100002)
May 28 23:57:35 [kernel] ohci_hcd 0001:10:1b.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100002)
May 28 23:57:35 [kernel] ehci_hcd 0001:10:1b.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100012)
May 28 23:57:35 [kernel] radeonfb (0000:00:10.0): resuming from state: 2...
May 28 23:57:35 [kernel] agpgart-uninorth 0000:00:0b.0: putting AGP V2 device into 4x mode
May 28 23:57:35 [kernel] radeonfb 0000:00:10.0: putting AGP V2 device into 4x mode
May 28 23:57:35 [kernel] ohci_hcd 0001:10:1b.0: PME# disabled
- Last output repeated twice -
May 28 23:57:35 [kernel] ohci_hcd 0001:10:1b.1: PME# disabled
- Last output repeated twice -
May 28 23:57:35 [kernel] ehci_hcd 0001:10:1b.2: PME# disabled
- Last output repeated twice -
May 28 23:57:35 [kernel] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048] IR/IT contexts=[8/8]
May 28 23:57:35 [kernel] eth0: resuming
May 28 23:57:35 [kernel] PHY ID: 4061e4, addr: 0
May 28 23:57:35 [kernel] adb: starting probe task...
May 28 23:57:35 [kernel] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
May 28 23:57:35 [kernel] hda: UDMA/100 mode selected
May 28 23:57:35 [kernel] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
May 28 23:57:35 [kernel] hdc: MWDMA2 mode selected
May 28 23:57:35 [kernel] adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f
May 28 23:57:35 [kernel] ADB keyboard at 2, handler 1
May 28 23:57:35 [kernel] ADB mouse at 3, handler set to 4 (trackpad)
May 28 23:57:35 [kernel] adb: finished probe task...
May 28 23:57:35 [kernel] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
May 28 23:57:35 [kernel] Registered led device: b43-phy0::tx
May 28 23:57:35 [kernel] Registered led device: b43-phy0::rx
May 28 23:57:51 [kernel] agpgart-uninorth 0000:00:0b.0: putting AGP V2 device into 4x mode
May 28 23:57:51 [kernel] radeonfb 0000:00:10.0: putting AGP V2 device into 4x mode
May 28 23:57:51 [kernel] [drm] Loading R200 Microcode
May 28 23:58:09 [kernel] Freezing user space processes ... (elapsed 0.00 seconds) done.
May 28 23:58:09 [kernel] Freezing remaining freezable tasks ... (elapsed 1.84 seconds) done.
May 28 23:58:09 [kernel] Suspending console(s) (use no_console_suspend to debug)
May 28 23:58:09 [kernel] ohci_hcd 0001:10:1a.0: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
May 28 23:58:09 [kernel] btusb_bulk_complete: hci0 urb ef8757e0 failed to resubmit (1)
May 28 23:58:09 [kernel] btusb_bulk_complete: hci0 urb ef875860 failed to resubmit (1)
May 28 23:58:09 [kernel] btusb_intr_complete: hci0 urb ef8758e0 failed to resubmit (1)
May 28 23:58:09 [kernel] eth0: suspending, WakeOnLan disabled
May 28 23:58:09 [kernel] ehci_hcd 0001:10:1b.2: PME# disabled
May 28 23:58:09 [kernel] ohci_hcd 0001:10:1b.1: PME# disabled
May 28 23:58:09 [kernel] ohci_hcd 0001:10:1b.0: PME# disabled
May 28 23:58:09 [kernel] radeonfb (0000:00:10.0): suspending for event: 2...
May 28 23:58:09 [kernel] agpgart-uninorth 0000:00:0b.0: disabling AGP on device 0000:00:10.0
May 28 23:58:09 [kernel] agpgart-uninorth 0000:00:0b.0: disabling AGP on bridge
May 28 23:58:09 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0xc (was 0x0, writing 0x90020001)
May 28 23:58:09 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x6 (was 0x0, writing 0x90000000)
May 28 23:58:09 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x5 (was 0x1, writing 0x401)
May 28 23:58:09 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x4 (was 0x8, writing 0x98000008)
May 28 23:58:09 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x3 (was 0x0, writing 0xff08)
May 28 23:58:09 [kernel] radeonfb 0000:00:10.0: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00007)
May 28 23:58:09 [kernel] b43-pci-bridge 0001:10:12.0: restoring config space at offset 0x4 (was 0x0, writing 0x80084000)
May 28 23:58:09 [kernel] b43-pci-bridge 0001:10:12.0: restoring config space at offset 0x3 (was 0x0, writing 0x1000)
May 28 23:58:09 [kernel] b43-pci-bridge 0001:10:12.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
May 28 23:58:09 [kernel] ohci_hcd 0001:10:1b.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100002)
May 28 23:58:09 [kernel] ohci_hcd 0001:10:1b.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100002)
May 28 23:58:09 [kernel] ehci_hcd 0001:10:1b.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100012)
May 28 23:58:09 [kernel] radeonfb (0000:00:10.0): resuming from state: 2...
May 28 23:58:09 [kernel] agpgart-uninorth 0000:00:0b.0: putting AGP V2 device into 4x mode
May 28 23:58:09 [kernel] radeonfb 0000:00:10.0: putting AGP V2 device into 4x mode
May 28 23:58:09 [kernel] ohci_hcd 0001:10:1b.0: PME# disabled
- Last output repeated twice -
May 28 23:58:09 [kernel] ohci_hcd 0001:10:1b.1: PME# disabled
- Last output repeated twice -
May 28 23:58:09 [kernel] ehci_hcd 0001:10:1b.2: PME# disabled
- Last output repeated twice -
May 28 23:58:09 [kernel] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048] IR/IT contexts=[8/8]
May 28 23:58:09 [kernel] eth0: resuming
May 28 23:58:09 [kernel] PHY ID: 4061e4, addr: 0
May 28 23:58:09 [kernel] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
May 28 23:58:09 [kernel] adb: starting probe task...
May 28 23:58:09 [kernel] hda: UDMA/100 mode selected
May 28 23:58:09 [kernel] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
May 28 23:58:09 [kernel] hdc: MWDMA2 mode selected
May 28 23:58:09 [kernel] adb devices: [2]: 2 c4 [7]: 7 1f
May 28 23:58:09 [kernel] ADB keyboard at 2, handler 1
May 28 23:58:09 [kernel] adb: finished probe task...
May 28 23:58:09 [kernel] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
May 28 23:58:09 [kernel] Registered led device: b43-phy0::tx
May 28 23:58:09 [kernel] Registered led device: b43-phy0::rx
May 28 23:58:10 [kernel] agpgart-uninorth 0000:00:0b.0: putting AGP V2 device into 4x mode
May 28 23:58:10 [kernel] radeonfb 0000:00:10.0: putting AGP V2 device into 4x mode
May 28 23:58:10 [kernel] [drm] Loading R200 MicrocodeQuoted 22 lines · Jan Scholz
Quoted 4 lines · Benjamin Herrenschmidt
Quoted 4 lines
We are too late in the cycle to revert this commit and it really is needed to fix a more serious issue. Nevertheless knowing that it caused the problem to appear on your system is also important.
Quoted 12 lines
Quoted 2 lines
Ben, do you have an idea what may be going on here? Does
__disable_irq()mask the interrupt on this platform?I suppose so :-) I'll have to check what's going on, it's not immediately clear to me.
Cheers,
Ben.Quoted 3 lines
I'd like to see a boot log, preferably containing a suspend-resume in which the problem was reproduced.
Here is a log from booting, through several suspend cycles, until the trackpad disappeared. The first few suspends were done while X was running but from the console. As you can tell from lines like
Quoted 6 lines
May 28 23:51:26 [kernel] adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f the trackpad was still present. The last suspend was done from within X, here the trackpad did not make it. May 28 23:58:09 [kernel] adb devices: [2]: 2 c4 [7]: 7 1fHowever, there have been cases, although not in this log, were the trackpad has been alive even when suspending from within X.
This means the problem is probably timing-related.
Can you please try to comment out suspend_device_irqs() and resume_device_irqs() in drivers/base/power/main.c and see if that changes anything? It's not entirely safe (well, that's why the calls are there after all), but hopefully the box won't hang during this test.
Best,
Rafael
Quoted 22 lines · Jan Scholz
Quoted 4 lines · Benjamin Herrenschmidt
Quoted 4 lines
We are too late in the cycle to revert this commit and it really is needed to fix a more serious issue. Nevertheless knowing that it caused the problem to appear on your system is also important.
Quoted 12 lines
Quoted 2 lines
Ben, do you have an idea what may be going on here? Does
__disable_irq()mask the interrupt on this platform?I suppose so :-) I'll have to check what's going on, it's not immediately clear to me.
Cheers,
Ben.Quoted 3 lines
I'd like to see a boot log, preferably containing a suspend-resume in which the problem was reproduced.
Here is a log from booting, through several suspend cycles, until the trackpad disappeared. The first few suspends were done while X was running but from the console. As you can tell from lines like
Quoted 6 lines
May 28 23:51:26 [kernel] adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f the trackpad was still present. The last suspend was done from within X, here the trackpad did not make it. May 28 23:58:09 [kernel] adb devices: [2]: 2 c4 [7]: 7 1fHowever, there have been cases, although not in this log, were the trackpad has been alive even when suspending from within X.
This means the problem is probably timing-related.
Can you please try to comment out suspend_device_irqs() and resume_device_irqs() in drivers/base/power/main.c and see if that changes anything? It's not entirely safe (well, that's why the calls are there after all), but hopefully the box won't hang during this test.
Best,
Rafael
Quoted 30 lines · Rafael J. Wysocki
Quoted 22 lines · Jan Scholz
Quoted 4 lines · Benjamin Herrenschmidt
Quoted 4 lines
We are too late in the cycle to revert this commit and it really is needed to fix a more serious issue. Nevertheless knowing that it caused the problem to appear on your system is also important.
Quoted 12 lines
Quoted 2 lines
Ben, do you have an idea what may be going on here? Does
__disable_irq()mask the interrupt on this platform?I suppose so :-) I'll have to check what's going on, it's not immediately clear to me.
Cheers,
Ben.Quoted 3 lines
I'd like to see a boot log, preferably containing a suspend-resume in which the problem was reproduced.
Here is a log from booting, through several suspend cycles, until the trackpad disappeared. The first few suspends were done while X was running but from the console. As you can tell from lines like
Quoted 6 lines
May 28 23:51:26 [kernel] adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f the trackpad was still present. The last suspend was done from within X, here the trackpad did not make it. May 28 23:58:09 [kernel] adb devices: [2]: 2 c4 [7]: 7 1fHowever, there have been cases, although not in this log, were the trackpad has been alive even when suspending from within X.
Quoted 7 lines
This means the problem is probably timing-related.
Can you please try to comment out
suspend_device_irqs()andresume_device_irqs()indrivers/base/power/main.cand see if that changes anything? It's not entirely safe (well, that's why the calls are there after all), but hopefully the box won't hang during this test.
Tried that against v2.6.30-rc7 and it seems to fix the issue. I did ~10 suspend-resume cycles from the console (which worked just like before) and ~20 cycles from within X and the trackpad is still alive.
Best,
Jan Scholz
Quoted 30 lines · Rafael J. Wysocki
Quoted 22 lines · Jan Scholz
Quoted 4 lines · Benjamin Herrenschmidt
Quoted 4 lines
We are too late in the cycle to revert this commit and it really is needed to fix a more serious issue. Nevertheless knowing that it caused the problem to appear on your system is also important.
Quoted 12 lines
Quoted 2 lines
Ben, do you have an idea what may be going on here? Does
__disable_irq()mask the interrupt on this platform?I suppose so :-) I'll have to check what's going on, it's not immediately clear to me.
Cheers,
Ben.Quoted 3 lines
I'd like to see a boot log, preferably containing a suspend-resume in which the problem was reproduced.
Here is a log from booting, through several suspend cycles, until the trackpad disappeared. The first few suspends were done while X was running but from the console. As you can tell from lines like
Quoted 6 lines
May 28 23:51:26 [kernel] adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f the trackpad was still present. The last suspend was done from within X, here the trackpad did not make it. May 28 23:58:09 [kernel] adb devices: [2]: 2 c4 [7]: 7 1fHowever, there have been cases, although not in this log, were the trackpad has been alive even when suspending from within X.
Quoted 7 lines
This means the problem is probably timing-related.
Can you please try to comment out
suspend_device_irqs()andresume_device_irqs()indrivers/base/power/main.cand see if that changes anything? It's not entirely safe (well, that's why the calls are there after all), but hopefully the box won't hang during this test.
Tried that against v2.6.30-rc7 and it seems to fix the issue. I did ~10 suspend-resume cycles from the console (which worked just like before) and ~20 cycles from within X and the trackpad is still alive.
Best,
Jan Scholz
Quoted 40 lines · Jan Scholz
Quoted 30 lines · Rafael J. Wysocki
Quoted 22 lines · Jan Scholz
Quoted 4 lines · Benjamin Herrenschmidt
Quoted 4 lines
We are too late in the cycle to revert this commit and it really is needed to fix a more serious issue. Nevertheless knowing that it caused the problem to appear on your system is also important.
Quoted 12 lines
Quoted 2 lines
Ben, do you have an idea what may be going on here? Does
__disable_irq()mask the interrupt on this platform?I suppose so :-) I'll have to check what's going on, it's not immediately clear to me.
Cheers,
Ben.Quoted 3 lines
I'd like to see a boot log, preferably containing a suspend-resume in which the problem was reproduced.
Here is a log from booting, through several suspend cycles, until the trackpad disappeared. The first few suspends were done while X was running but from the console. As you can tell from lines like
Quoted 6 lines
May 28 23:51:26 [kernel] adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f the trackpad was still present. The last suspend was done from within X, here the trackpad did not make it. May 28 23:58:09 [kernel] adb devices: [2]: 2 c4 [7]: 7 1fHowever, there have been cases, although not in this log, were the trackpad has been alive even when suspending from within X.
Quoted 7 lines
This means the problem is probably timing-related.
Can you please try to comment out
suspend_device_irqs()andresume_device_irqs()indrivers/base/power/main.cand see if that changes anything? It's not entirely safe (well, that's why the calls are there after all), but hopefully the box won't hang during this test.
Quoted 3 lines
Tried that against v2.6.30-rc7 and it seems to fix the issue. I did ~10 suspend-resume cycles from the console (which worked just like before) and ~20 cycles from within X and the trackpad is still alive.
So, it seems we lose and interrupt during resume and that confuses the ADB controller driver or something like this. Do you use the keyboard or the trackpad as a wake-up device?
Please additionally try to go back to the original code, put 'sleepy_trackpad = 1' at the beginning of do_adb_reset_bus() in drivers/macintosh/adb.c and see if the problem is reproducible with that.
Best,
Rafael
Quoted 40 lines · Jan Scholz
Quoted 30 lines · Rafael J. Wysocki
Quoted 22 lines · Jan Scholz
Quoted 4 lines · Benjamin Herrenschmidt
Quoted 4 lines
We are too late in the cycle to revert this commit and it really is needed to fix a more serious issue. Nevertheless knowing that it caused the problem to appear on your system is also important.
Quoted 12 lines
Quoted 2 lines
Ben, do you have an idea what may be going on here? Does
__disable_irq()mask the interrupt on this platform?I suppose so :-) I'll have to check what's going on, it's not immediately clear to me.
Cheers,
Ben.Quoted 3 lines
I'd like to see a boot log, preferably containing a suspend-resume in which the problem was reproduced.
Here is a log from booting, through several suspend cycles, until the trackpad disappeared. The first few suspends were done while X was running but from the console. As you can tell from lines like
Quoted 6 lines
May 28 23:51:26 [kernel] adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f the trackpad was still present. The last suspend was done from within X, here the trackpad did not make it. May 28 23:58:09 [kernel] adb devices: [2]: 2 c4 [7]: 7 1fHowever, there have been cases, although not in this log, were the trackpad has been alive even when suspending from within X.
Quoted 7 lines
This means the problem is probably timing-related.
Can you please try to comment out
suspend_device_irqs()andresume_device_irqs()indrivers/base/power/main.cand see if that changes anything? It's not entirely safe (well, that's why the calls are there after all), but hopefully the box won't hang during this test.
Quoted 3 lines
Tried that against v2.6.30-rc7 and it seems to fix the issue. I did ~10 suspend-resume cycles from the console (which worked just like before) and ~20 cycles from within X and the trackpad is still alive.
So, it seems we lose and interrupt during resume and that confuses the ADB controller driver or something like this. Do you use the keyboard or the trackpad as a wake-up device?
Please additionally try to go back to the original code, put 'sleepy_trackpad = 1' at the beginning of do_adb_reset_bus() in drivers/macintosh/adb.c and see if the problem is reproducible with that.
Best,
Rafael
Quoted 41 lines · Rafael J. Wysocki
Quoted 40 lines · Jan Scholz
Quoted 37 lines · Rafael J. Wysocki
Quoted 22 lines · Jan Scholz
Quoted 4 lines · Benjamin Herrenschmidt
Quoted 4 lines
We are too late in the cycle to revert this commit and it really is needed to fix a more serious issue. Nevertheless knowing that it caused the problem to appear on your system is also important.
Quoted 12 lines
Quoted 2 lines
Ben, do you have an idea what may be going on here? Does
__disable_irq()mask the interrupt on this platform?I suppose so :-) I'll have to check what's going on, it's not immediately clear to me.
Cheers,
Ben.Quoted 3 lines
I'd like to see a boot log, preferably containing a suspend-resume in which the problem was reproduced.
Here is a log from booting, through several suspend cycles, until the trackpad disappeared. The first few suspends were done while X was running but from the console. As you can tell from lines like
Quoted 6 lines
May 28 23:51:26 [kernel] adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f the trackpad was still present. The last suspend was done from within X, here the trackpad did not make it. May 28 23:58:09 [kernel] adb devices: [2]: 2 c4 [7]: 7 1fHowever, there have been cases, although not in this log, were the trackpad has been alive even when suspending from within X.
This means the problem is probably timing-related.
Can you please try to comment out
suspend_device_irqs()andresume_device_irqs()indrivers/base/power/main.cand see if that changes anything? It's not entirely safe (well, that's why the calls are there after all), but hopefully the box won't hang during this test.
Quoted 7 lines
Quoted 3 lines
Tried that against v2.6.30-rc7 and it seems to fix the issue. I did ~10 suspend-resume cycles from the console (which worked just like before) and ~20 cycles from within X and the trackpad is still alive.
So, it seems we lose and interrupt during resume and that confuses the ADB controller driver or something like this. Do you use the keyboard or the trackpad as a wake-up device?
I do the wakeup by pressing keys on the keyboard. I'd try wakeup via the trackpad's button, but I have no idea how to activate that.
Quoted 3 lines
Please additionally try to go back to the original code, put '
sleepy_trackpad= 1' at the beginning ofdo_adb_reset_bus()indrivers/macintosh/adb.cand see if the problem is reproducible with that.
Tried this, but it does not help.
What I haven't noticed before is, that even if the trackpad already disappeared, an additional suspend-resume cycle from the console brought it back to life every time. Sometimes this worked from within X as well, just not with such a high probability as from the console. However, this is independent from 'sleepy_trackpad = 1'.
Best,
Jan
Quoted 41 lines · Rafael J. Wysocki
Quoted 40 lines · Jan Scholz
Quoted 37 lines · Rafael J. Wysocki
Quoted 22 lines · Jan Scholz
Quoted 4 lines · Benjamin Herrenschmidt
Quoted 4 lines
We are too late in the cycle to revert this commit and it really is needed to fix a more serious issue. Nevertheless knowing that it caused the problem to appear on your system is also important.
Quoted 12 lines
Quoted 2 lines
Ben, do you have an idea what may be going on here? Does
__disable_irq()mask the interrupt on this platform?I suppose so :-) I'll have to check what's going on, it's not immediately clear to me.
Cheers,
Ben.Quoted 3 lines
I'd like to see a boot log, preferably containing a suspend-resume in which the problem was reproduced.
Here is a log from booting, through several suspend cycles, until the trackpad disappeared. The first few suspends were done while X was running but from the console. As you can tell from lines like
Quoted 6 lines
May 28 23:51:26 [kernel] adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f the trackpad was still present. The last suspend was done from within X, here the trackpad did not make it. May 28 23:58:09 [kernel] adb devices: [2]: 2 c4 [7]: 7 1fHowever, there have been cases, although not in this log, were the trackpad has been alive even when suspending from within X.
This means the problem is probably timing-related.
Can you please try to comment out
suspend_device_irqs()andresume_device_irqs()indrivers/base/power/main.cand see if that changes anything? It's not entirely safe (well, that's why the calls are there after all), but hopefully the box won't hang during this test.
Quoted 7 lines
Quoted 3 lines
Tried that against v2.6.30-rc7 and it seems to fix the issue. I did ~10 suspend-resume cycles from the console (which worked just like before) and ~20 cycles from within X and the trackpad is still alive.
So, it seems we lose and interrupt during resume and that confuses the ADB controller driver or something like this. Do you use the keyboard or the trackpad as a wake-up device?
I do the wakeup by pressing keys on the keyboard. I'd try wakeup via the trackpad's button, but I have no idea how to activate that.
Quoted 3 lines
Please additionally try to go back to the original code, put '
sleepy_trackpad= 1' at the beginning ofdo_adb_reset_bus()indrivers/macintosh/adb.cand see if the problem is reproducible with that.
Tried this, but it does not help.
What I haven't noticed before is, that even if the trackpad already disappeared, an additional suspend-resume cycle from the console brought it back to life every time. Sometimes this worked from within X as well, just not with such a high probability as from the console. However, this is independent from 'sleepy_trackpad = 1'.
Best,
Jan
Quoted 58 lines · Jan Scholz
Quoted 41 lines · Rafael J. Wysocki
Quoted 40 lines · Jan Scholz
Quoted 37 lines · Rafael J. Wysocki
Quoted 22 lines · Jan Scholz
Quoted 4 lines · Benjamin Herrenschmidt
Quoted 4 lines
We are too late in the cycle to revert this commit and it really is needed to fix a more serious issue. Nevertheless knowing that it caused the problem to appear on your system is also important.
Quoted 12 lines
Quoted 2 lines
Ben, do you have an idea what may be going on here? Does
__disable_irq()mask the interrupt on this platform?I suppose so :-) I'll have to check what's going on, it's not immediately clear to me.
Cheers,
Ben.Quoted 3 lines
I'd like to see a boot log, preferably containing a suspend-resume in which the problem was reproduced.
Here is a log from booting, through several suspend cycles, until the trackpad disappeared. The first few suspends were done while X was running but from the console. As you can tell from lines like
Quoted 6 lines
May 28 23:51:26 [kernel] adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f the trackpad was still present. The last suspend was done from within X, here the trackpad did not make it. May 28 23:58:09 [kernel] adb devices: [2]: 2 c4 [7]: 7 1fHowever, there have been cases, although not in this log, were the trackpad has been alive even when suspending from within X.
This means the problem is probably timing-related.
Can you please try to comment out
suspend_device_irqs()andresume_device_irqs()indrivers/base/power/main.cand see if that changes anything? It's not entirely safe (well, that's why the calls are there after all), but hopefully the box won't hang during this test.Quoted 7 lines
Quoted 3 lines
Tried that against v2.6.30-rc7 and it seems to fix the issue. I did ~10 suspend-resume cycles from the console (which worked just like before) and ~20 cycles from within X and the trackpad is still alive.
So, it seems we lose and interrupt during resume and that confuses the ADB controller driver or something like this. Do you use the keyboard or the trackpad as a wake-up device?
I do the wakeup by pressing keys on the keyboard. I'd try wakeup via the trackpad's button, but I have no idea how to activate that.
Quoted 3 lines
Please additionally try to go back to the original code, put '
sleepy_trackpad= 1' at the beginning ofdo_adb_reset_bus()indrivers/macintosh/adb.cand see if the problem is reproducible with that.
Quoted 7 lines
Tried this, but it does not help.
What I haven't noticed before is, that even if the trackpad already disappeared, an additional suspend-resume cycle from the console brought it back to life every time. Sometimes this worked from within X as well, just not with such a high probability as from the console. However, this is independent from '
sleepy_trackpad= 1'.
OK, thanks for testing. I think I know what to do, but I need some time to prepare a patch.
Best,
Rafael
Quoted 58 lines · Jan Scholz
Quoted 41 lines · Rafael J. Wysocki
Quoted 40 lines · Jan Scholz
Quoted 37 lines · Rafael J. Wysocki
Quoted 22 lines · Jan Scholz
Quoted 4 lines · Benjamin Herrenschmidt
Quoted 4 lines
We are too late in the cycle to revert this commit and it really is needed to fix a more serious issue. Nevertheless knowing that it caused the problem to appear on your system is also important.
Quoted 12 lines
Quoted 2 lines
Ben, do you have an idea what may be going on here? Does
__disable_irq()mask the interrupt on this platform?I suppose so :-) I'll have to check what's going on, it's not immediately clear to me.
Cheers,
Ben.Quoted 3 lines
I'd like to see a boot log, preferably containing a suspend-resume in which the problem was reproduced.
Here is a log from booting, through several suspend cycles, until the trackpad disappeared. The first few suspends were done while X was running but from the console. As you can tell from lines like
Quoted 6 lines
May 28 23:51:26 [kernel] adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f the trackpad was still present. The last suspend was done from within X, here the trackpad did not make it. May 28 23:58:09 [kernel] adb devices: [2]: 2 c4 [7]: 7 1fHowever, there have been cases, although not in this log, were the trackpad has been alive even when suspending from within X.
This means the problem is probably timing-related.
Can you please try to comment out
suspend_device_irqs()andresume_device_irqs()indrivers/base/power/main.cand see if that changes anything? It's not entirely safe (well, that's why the calls are there after all), but hopefully the box won't hang during this test.Quoted 7 lines
Quoted 3 lines
Tried that against v2.6.30-rc7 and it seems to fix the issue. I did ~10 suspend-resume cycles from the console (which worked just like before) and ~20 cycles from within X and the trackpad is still alive.
So, it seems we lose and interrupt during resume and that confuses the ADB controller driver or something like this. Do you use the keyboard or the trackpad as a wake-up device?
I do the wakeup by pressing keys on the keyboard. I'd try wakeup via the trackpad's button, but I have no idea how to activate that.
Quoted 3 lines
Please additionally try to go back to the original code, put '
sleepy_trackpad= 1' at the beginning ofdo_adb_reset_bus()indrivers/macintosh/adb.cand see if the problem is reproducible with that.
Quoted 7 lines
Tried this, but it does not help.
What I haven't noticed before is, that even if the trackpad already disappeared, an additional suspend-resume cycle from the console brought it back to life every time. Sometimes this worked from within X as well, just not with such a high probability as from the console. However, this is independent from '
sleepy_trackpad= 1'.
OK, thanks for testing. I think I know what to do, but I need some time to prepare a patch.
Best,
Rafael
Quoted 11 lines
Quoted 8 lines
Tried this, but it does not help.
What I haven't noticed before is, that even if the trackpad already disappeared, an additional suspend-resume cycle from the console brought it back to life every time. Sometimes this worked from within X as well, just not with such a high probability as from the console. However, this is independent from '
sleepy_trackpad= 1'.OK, thanks for testing. I think I know what to do, but I need some time to prepare a patch.
I wonder if the trakpad is timing out at some stage, we don't drain it properly before suspend or something like that. Those ADB things are a bit strange.
Ben.
Quoted 11 lines
Quoted 8 lines
Tried this, but it does not help.
What I haven't noticed before is, that even if the trackpad already disappeared, an additional suspend-resume cycle from the console brought it back to life every time. Sometimes this worked from within X as well, just not with such a high probability as from the console. However, this is independent from '
sleepy_trackpad= 1'.OK, thanks for testing. I think I know what to do, but I need some time to prepare a patch.
I wonder if the trakpad is timing out at some stage, we don't drain it properly before suspend or something like that. Those ADB things are a bit strange.
Ben.
Quoted 58 lines · Jan Scholz
Quoted 41 lines · Rafael J. Wysocki
Quoted 40 lines · Jan Scholz
Quoted 37 lines · Rafael J. Wysocki
Quoted 22 lines · Jan Scholz
Quoted 4 lines · Benjamin Herrenschmidt
Quoted 4 lines
We are too late in the cycle to revert this commit and it really is needed to fix a more serious issue. Nevertheless knowing that it caused the problem to appear on your system is also important.
Quoted 12 lines
Quoted 2 lines
Ben, do you have an idea what may be going on here? Does
__disable_irq()mask the interrupt on this platform?I suppose so :-) I'll have to check what's going on, it's not immediately clear to me.
Cheers,
Ben.Quoted 3 lines
I'd like to see a boot log, preferably containing a suspend-resume in which the problem was reproduced.
Here is a log from booting, through several suspend cycles, until the trackpad disappeared. The first few suspends were done while X was running but from the console. As you can tell from lines like
Quoted 6 lines
May 28 23:51:26 [kernel] adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f the trackpad was still present. The last suspend was done from within X, here the trackpad did not make it. May 28 23:58:09 [kernel] adb devices: [2]: 2 c4 [7]: 7 1fHowever, there have been cases, although not in this log, were the trackpad has been alive even when suspending from within X.
This means the problem is probably timing-related.
Can you please try to comment out
suspend_device_irqs()andresume_device_irqs()indrivers/base/power/main.cand see if that changes anything? It's not entirely safe (well, that's why the calls are there after all), but hopefully the box won't hang during this test.Quoted 7 lines
Quoted 3 lines
Tried that against v2.6.30-rc7 and it seems to fix the issue. I did ~10 suspend-resume cycles from the console (which worked just like before) and ~20 cycles from within X and the trackpad is still alive.
So, it seems we lose and interrupt during resume and that confuses the ADB controller driver or something like this. Do you use the keyboard or the trackpad as a wake-up device?
I do the wakeup by pressing keys on the keyboard. I'd try wakeup via the trackpad's button, but I have no idea how to activate that.
Quoted 3 lines
Please additionally try to go back to the original code, put '
sleepy_trackpad= 1' at the beginning ofdo_adb_reset_bus()indrivers/macintosh/adb.cand see if the problem is reproducible with that.
Quoted 7 lines
Tried this, but it does not help.
What I haven't noticed before is, that even if the trackpad already disappeared, an additional suspend-resume cycle from the console brought it back to life every time. Sometimes this worked from within X as well, just not with such a high probability as from the console. However, this is independent from '
sleepy_trackpad= 1'.
OK, the patch is below, but I haven't had the opportunity to test it yet.
Can you please check if it helps, on top of 2.6.30-rc8?
Best,
Rafael
--- kernel/irq/manage.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)
kernel/irq/manage.c +8 -4
@@ -187,9 +187,9 @@ static inline int setup_affinity(unsignevoid __disable_irq (struct irq_desc *desc,unsigned int irq,bool suspend) {if (suspend) { -if (!desc->action || (desc->action->flags &IRQF_TIMER )) -return ; - desc->status |=IRQ_SUSPENDED ; +if (desc->action && !(desc->action->flags &IRQF_TIMER )) + desc->status |=IRQ_SUSPENDED |IRQ_DISABLED ; +return ; }if (!desc->depth++) {
@@ -250,8 +250,12 @@ EXPORT_SYMBOL(disable_irq);void __enable_irq (struct irq_desc *desc,unsigned int irq,bool resume) { -if (resume) +if (resume) { desc->status &= ~IRQ_SUSPENDED ; +if (!desc->depth) + desc->status &= ~IRQ_DISABLED ; +return ; + }switch (desc->depth) {case 0 :
Quoted 120 lines · Rafael J. Wysocki
Quoted 9 lines · Jan Scholz
Quoted 7 lines · Rafael J. Wysocki
Quoted 6 lines · Jan Scholz
Quoted 4 lines · Rafael J. Wysocki
Quoted 3 lines · Jan Scholz
Quoted 1 line · Benjamin Herrenschmidt
Quoted 1 line
We are too late in the cycle to revert this commit and it
really is needed to
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
fix a more serious issue. Nevertheless knowing that it caused
the problem to
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
appear on your system is also important.
Ben, do you have an idea what may be going on here? Does
__disable_irq()maskQuoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 1 line
the interrupt on this platform?
I suppose so :-) I'll have to check what's going on, it's not immediately clear to me.
Cheers,
Ben.Quoted 2 lines
I'd like to see a boot log, preferably containing a
suspend-resume in which
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 1 line
Quoted 1 line
the problem was reproduced.
Here is a log from booting, through several suspend cycles, until
the
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
trackpad disappeared. The first few suspends were done while X was running but from the console. As you can tell from lines like
May 28 23:51:26 [kernel] adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1fthe trackpad was still present. The last suspend was done from
within X,
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
Quoted 4 lines
here the trackpad did not make it.
May 28 23:58:09 [kernel] adb devices: [2]: 2 c4 [7]: 7 1fHowever, there have been cases, although not in this log, were the trackpad has been alive even when suspending from within X.
This means the problem is probably timing-related.
Can you please try to comment out
suspend_device_irqs()andresume_device_irqs()indrivers/base/power/main.cand see if thatchanges
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
anything? It's not entirely safe (well, that's why the calls are
there after
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 2 lines
all), but hopefully the box won't hang during this test.
Tried that against v2.6.30-rc7 and it seems to fix the issue. I did
~10
Quoted 1 line
Quoted 1 line
Quoted 1 line
suspend-resume cycles from the console (which worked just like
before)
Quoted 4 lines
Quoted 4 lines
Quoted 1 line
and ~20 cycles from within X and the trackpad is still alive.
So, it seems we lose and interrupt during resume and that confuses the ADB controller driver or something like this. Do you use the keyboard
or
Quoted 8 lines
Quoted 1 line
the trackpad as a wake-up device?
I do the wakeup by pressing keys on the keyboard. I'd try wakeup via the trackpad's button, but I have no idea how to activate that.
Quoted 3 lines
Please additionally try to go back to the original code, put '
sleepy_trackpad= 1' at the beginning ofdo_adb_reset_bus()indrivers/macintosh/adb.cand see if the problem is reproducible withthat.
Quoted 8 lines
Tried this, but it does not help.
What I haven't noticed before is, that even if the trackpad already disappeared, an additional suspend-resume cycle from the console brought it back to life every time. Sometimes this worked from within X as well, just not with such a high probability as from the console. However, this is independent from '
sleepy_trackpad= 1'.OK, the patch is below, but I haven't had the opportunity to test it yet.
Can you please check if it helps, on top of 2.6.30-rc8?
Best,
Rafael---
kernel/irq/manage.c| 12 ++++++++----1 file changed, 8 insertions(+), 4 deletions(-)Index:
linux-2.6/kernel/irq/manage.c
===================================================================kernel/irq/manage.c +8
-4@@ -187,9 +187,9 @@ static inline int setup_affinity(unsignevoid __disable_irq (struct irq_desc *desc,unsigned int irq,bool suspend) {if (suspend) { -if (!desc->action || (desc->action->flags &IRQF_TIMER )) -return ; - desc->status |=IRQ_SUSPENDED ; +if (desc->action && !(desc->action->flags &IRQF_TIMER )) + desc->status |=IRQ_SUSPENDED |IRQ_DISABLED ; +return ; }if (!desc->depth++) {@@ -250,8 +250,12 @@ EXPORT_SYMBOL(disable_irq);void __enable_irq (struct irq_desc *desc,unsigned int irq,bool resume) { -if (resume) +if (resume) { desc->status &= ~IRQ_SUSPENDED ; +if (!desc->depth) + desc->status &= ~IRQ_DISABLED ; +return ; + }switch (desc->depth) {
Quoted 1 line
case 0:
Hi Rafael,
I tried your patch, but it makes my box crash on wakeup. It even reset the hwclock which normally only happens with completely empty battery and without AC.
Here are the last few lines of the syslog, and the first after booting again:
Jun 3 13:53:12 [kernel] [drm] writeback test succeeded in 1 usecs
Jun 3 13:53:40 [kernel] radeonfb 0000:00:10.0: Invalid ROM contents
- Last output repeated twice -
Jun 3 13:53:41 [kernel] agpgart-uninorth 0000:00:0b.0: putting AGP V2 device into 4x mode
Jun 3 13:53:41 [kernel] radeonfb 0000:00:10.0: putting AGP V2 device into 4x mode
Jun 3 13:53:41 [kernel] [drm] Setting GART location based on new memory map
Jun 3 13:53:41 [kernel] [drm] Loading R200 Microcode
Jun 3 13:53:41 [kernel] [drm] writeback test succeeded in 1 usecs
Jun 3 13:53:47 [pbbuttonsd] INFO: Script '/etc/power/pmcs-pbbuttonsd suspend ac ram' launched and exited normally_
Jan 1 01:01:52 [kernel] via-pmu: Server Mode is disabledCheers,
Jan
Quoted 120 lines · Rafael J. Wysocki
Quoted 9 lines · Jan Scholz
Quoted 7 lines · Rafael J. Wysocki
Quoted 6 lines · Jan Scholz
Quoted 4 lines · Rafael J. Wysocki
Quoted 3 lines · Jan Scholz
Quoted 1 line · Benjamin Herrenschmidt
Quoted 1 line
We are too late in the cycle to revert this commit and it
really is needed to
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
fix a more serious issue. Nevertheless knowing that it caused
the problem to
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
appear on your system is also important.
Ben, do you have an idea what may be going on here? Does
__disable_irq()maskQuoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 1 line
the interrupt on this platform?
I suppose so :-) I'll have to check what's going on, it's not immediately clear to me.
Cheers,
Ben.Quoted 2 lines
I'd like to see a boot log, preferably containing a
suspend-resume in which
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 1 line
Quoted 1 line
the problem was reproduced.
Here is a log from booting, through several suspend cycles, until
the
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
trackpad disappeared. The first few suspends were done while X was running but from the console. As you can tell from lines like
May 28 23:51:26 [kernel] adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1fthe trackpad was still present. The last suspend was done from
within X,
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
Quoted 4 lines
here the trackpad did not make it.
May 28 23:58:09 [kernel] adb devices: [2]: 2 c4 [7]: 7 1fHowever, there have been cases, although not in this log, were the trackpad has been alive even when suspending from within X.
This means the problem is probably timing-related.
Can you please try to comment out
suspend_device_irqs()andresume_device_irqs()indrivers/base/power/main.cand see if thatchanges
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
anything? It's not entirely safe (well, that's why the calls are
there after
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 2 lines
all), but hopefully the box won't hang during this test.
Tried that against v2.6.30-rc7 and it seems to fix the issue. I did
~10
Quoted 1 line
Quoted 1 line
Quoted 1 line
suspend-resume cycles from the console (which worked just like
before)
Quoted 4 lines
Quoted 4 lines
Quoted 1 line
and ~20 cycles from within X and the trackpad is still alive.
So, it seems we lose and interrupt during resume and that confuses the ADB controller driver or something like this. Do you use the keyboard
or
Quoted 8 lines
Quoted 1 line
the trackpad as a wake-up device?
I do the wakeup by pressing keys on the keyboard. I'd try wakeup via the trackpad's button, but I have no idea how to activate that.
Quoted 3 lines
Please additionally try to go back to the original code, put '
sleepy_trackpad= 1' at the beginning ofdo_adb_reset_bus()indrivers/macintosh/adb.cand see if the problem is reproducible withthat.
Quoted 8 lines
Tried this, but it does not help.
What I haven't noticed before is, that even if the trackpad already disappeared, an additional suspend-resume cycle from the console brought it back to life every time. Sometimes this worked from within X as well, just not with such a high probability as from the console. However, this is independent from '
sleepy_trackpad= 1'.OK, the patch is below, but I haven't had the opportunity to test it yet.
Can you please check if it helps, on top of 2.6.30-rc8?
Best,
Rafael---
kernel/irq/manage.c| 12 ++++++++----1 file changed, 8 insertions(+), 4 deletions(-)Index:
linux-2.6/kernel/irq/manage.c
===================================================================kernel/irq/manage.c +8
-4@@ -187,9 +187,9 @@ static inline int setup_affinity(unsignevoid __disable_irq (struct irq_desc *desc,unsigned int irq,bool suspend) {if (suspend) { -if (!desc->action || (desc->action->flags &IRQF_TIMER )) -return ; - desc->status |=IRQ_SUSPENDED ; +if (desc->action && !(desc->action->flags &IRQF_TIMER )) + desc->status |=IRQ_SUSPENDED |IRQ_DISABLED ; +return ; }if (!desc->depth++) {@@ -250,8 +250,12 @@ EXPORT_SYMBOL(disable_irq);void __enable_irq (struct irq_desc *desc,unsigned int irq,bool resume) { -if (resume) +if (resume) { desc->status &= ~IRQ_SUSPENDED ; +if (!desc->depth) + desc->status &= ~IRQ_DISABLED ; +return ; + }switch (desc->depth) {
Quoted 1 line
case 0:
Hi Rafael,
I tried your patch, but it makes my box crash on wakeup. It even reset the hwclock which normally only happens with completely empty battery and without AC.
Here are the last few lines of the syslog, and the first after booting again:
Jun 3 13:53:12 [kernel] [drm] writeback test succeeded in 1 usecs
Jun 3 13:53:40 [kernel] radeonfb 0000:00:10.0: Invalid ROM contents
- Last output repeated twice -
Jun 3 13:53:41 [kernel] agpgart-uninorth 0000:00:0b.0: putting AGP V2 device into 4x mode
Jun 3 13:53:41 [kernel] radeonfb 0000:00:10.0: putting AGP V2 device into 4x mode
Jun 3 13:53:41 [kernel] [drm] Setting GART location based on new memory map
Jun 3 13:53:41 [kernel] [drm] Loading R200 Microcode
Jun 3 13:53:41 [kernel] [drm] writeback test succeeded in 1 usecs
Jun 3 13:53:47 [pbbuttonsd] INFO: Script '/etc/power/pmcs-pbbuttonsd suspend ac ram' launched and exited normally_
Jan 1 01:01:52 [kernel] via-pmu: Server Mode is disabledCheers,
Jan
Quoted 121 lines · Jan Scholz
Quoted 119 lines · Rafael J. Wysocki
Quoted 9 lines · Jan Scholz
Quoted 7 lines · Rafael J. Wysocki
Quoted 6 lines · Jan Scholz
Quoted 4 lines · Rafael J. Wysocki
Quoted 3 lines · Jan Scholz
Quoted 1 line · Benjamin Herrenschmidt
Quoted 1 line
We are too late in the cycle to revert this commit and it
really is needed to
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
fix a more serious issue. Nevertheless knowing that it caused
the problem to
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
appear on your system is also important.
Ben, do you have an idea what may be going on here? Does
__disable_irq()maskQuoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 1 line
the interrupt on this platform?
I suppose so :-) I'll have to check what's going on, it's not immediately clear to me.
Cheers,
Ben.Quoted 2 lines
I'd like to see a boot log, preferably containing a
suspend-resume in which
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 1 line
Quoted 1 line
the problem was reproduced.
Here is a log from booting, through several suspend cycles, until
the
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
trackpad disappeared. The first few suspends were done while X was running but from the console. As you can tell from lines like
May 28 23:51:26 [kernel] adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1fthe trackpad was still present. The last suspend was done from
within X,
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
Quoted 4 lines
here the trackpad did not make it.
May 28 23:58:09 [kernel] adb devices: [2]: 2 c4 [7]: 7 1fHowever, there have been cases, although not in this log, were the trackpad has been alive even when suspending from within X.
This means the problem is probably timing-related.
Can you please try to comment out
suspend_device_irqs()andresume_device_irqs()indrivers/base/power/main.cand see if thatchanges
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
anything? It's not entirely safe (well, that's why the calls are
there after
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 2 lines
all), but hopefully the box won't hang during this test.
Tried that against v2.6.30-rc7 and it seems to fix the issue. I did
~10
Quoted 1 line
Quoted 1 line
Quoted 1 line
suspend-resume cycles from the console (which worked just like
before)
Quoted 4 lines
Quoted 4 lines
Quoted 1 line
and ~20 cycles from within X and the trackpad is still alive.
So, it seems we lose and interrupt during resume and that confuses the ADB controller driver or something like this. Do you use the keyboard
or
Quoted 8 lines
Quoted 1 line
the trackpad as a wake-up device?
I do the wakeup by pressing keys on the keyboard. I'd try wakeup via the trackpad's button, but I have no idea how to activate that.
Quoted 3 lines
Please additionally try to go back to the original code, put '
sleepy_trackpad= 1' at the beginning ofdo_adb_reset_bus()indrivers/macintosh/adb.cand see if the problem is reproducible withthat.
Quoted 8 lines
Tried this, but it does not help.
What I haven't noticed before is, that even if the trackpad already disappeared, an additional suspend-resume cycle from the console brought it back to life every time. Sometimes this worked from within X as well, just not with such a high probability as from the console. However, this is independent from '
sleepy_trackpad= 1'.OK, the patch is below, but I haven't had the opportunity to test it yet.
Can you please check if it helps, on top of 2.6.30-rc8?
Best,
Rafael---
kernel/irq/manage.c| 12 ++++++++----1 file changed, 8 insertions(+), 4 deletions(-)Index:
linux-2.6/kernel/irq/manage.c
===================================================================kernel/irq/manage.c +8
-4@@ -187,9 +187,9 @@ static inline int setup_affinity(unsignevoid __disable_irq (struct irq_desc *desc,unsigned int irq,bool suspend) {if (suspend) { -if (!desc->action || (desc->action->flags &IRQF_TIMER )) -return ; - desc->status |=IRQ_SUSPENDED ; +if (desc->action && !(desc->action->flags &IRQF_TIMER )) + desc->status |=IRQ_SUSPENDED |IRQ_DISABLED ; +return ; }if (!desc->depth++) {@@ -250,8 +250,12 @@ EXPORT_SYMBOL(disable_irq);void __enable_irq (struct irq_desc *desc,unsigned int irq,bool resume) { -if (resume) +if (resume) { desc->status &= ~IRQ_SUSPENDED ; +if (!desc->depth) + desc->status &= ~IRQ_DISABLED ; +return ; + }
Quoted 8 lines
Quoted 2 lines
kernel/irq/manage.c +0
-0switch (desc->depth) {case 0:
Hi Rafael,
I tried your patch, but it makes my box crash on wakeup. It even reset the hwclock which normally only happens with completely empty battery and without AC.
Ouch, sorry.
In that case I have no idea why it breaks.
Johannes also reported a problem with MacBook that was most probably introduced by the suspend reordering changes, but that one related to hibernation.
Best,
Rafael
On Wednesday 03 June 2009, Rafael J. Wysocki wrote:
[--snip--]
Quoted 2 lines
In that case I have no idea why it breaks.
Well, in fact I think there is an interrupt we shouldn't disable on suspend, but we need to figure out which one it is.
Can you please send me /proc/interrupts from your system?
Rafael
Quoted 10 lines · Rafael J. Wysocki
On Wednesday 03 June 2009, Rafael J. Wysocki wrote:
[--snip--]Quoted 2 lines
In that case I have no idea why it breaks.
Well, in fact I think there is an interrupt we shouldn't disable on suspend,
but we need to figure out which one it is.Can you please send me
/proc/interruptsfrom your system?
Here you are:
CPU0
21: 58 MPIC 1 Edge PMac Output 24: 3146 MPIC 1 Level ide1 25: 145796 MPIC 1 Level VIA-PMU 26: 79 MPIC 1 Level keywest i2c 29: 196 MPIC 1 Level ohci_hcd:usb2 30: 0 MPIC 1 Edge PMac Input 39: 22058 MPIC 1 Level ide0 40: 2 MPIC 1 Level ohci1394 41: 0 MPIC 1 Level eth0 42: 3612 MPIC 1 Level keywest i2c 47: 5551 MPIC 1 Level GPIO1 ADB 48: 18938 MPIC 1 Level radeon@pci:0000:00:10.0 52: 5310 MPIC 1 Level b43 61: 0 MPIC 1 Edge Sound Headphone Detection 63: 0 MPIC 1 Level ehci_hcd:usb1, ohci_hcd:usb3, ohci_hcd:usb4
BAD: 0
Quoted 10 lines · Rafael J. Wysocki
On Wednesday 03 June 2009, Rafael J. Wysocki wrote:
[--snip--]Quoted 2 lines
In that case I have no idea why it breaks.
Well, in fact I think there is an interrupt we shouldn't disable on suspend,
but we need to figure out which one it is.Can you please send me
/proc/interruptsfrom your system?
Here you are:
CPU0
21: 58 MPIC 1 Edge PMac Output 24: 3146 MPIC 1 Level ide1 25: 145796 MPIC 1 Level VIA-PMU 26: 79 MPIC 1 Level keywest i2c 29: 196 MPIC 1 Level ohci_hcd:usb2 30: 0 MPIC 1 Edge PMac Input 39: 22058 MPIC 1 Level ide0 40: 2 MPIC 1 Level ohci1394 41: 0 MPIC 1 Level eth0 42: 3612 MPIC 1 Level keywest i2c 47: 5551 MPIC 1 Level GPIO1 ADB 48: 18938 MPIC 1 Level radeon@pci:0000:00:10.0 52: 5310 MPIC 1 Level b43 61: 0 MPIC 1 Edge Sound Headphone Detection 63: 0 MPIC 1 Level ehci_hcd:usb1, ohci_hcd:usb3, ohci_hcd:usb4
BAD: 0
Allright, I think I nailed it (finally !)
Can everybody try this patch:
[PATCH] powerpc/pmac: Fix issues with sleep on some powerbooks
From: Benjamin Herrenschmidt <[email protected]>
Since the change of how interrupts are disabled during suspend, certain PowerBook models started exhibiting various issues during suspend or resume from sleep.
I finally tracked it down to the code that runs various "platform" functions (kind of little scripts extracted from the device-tree), which uses our i2c and PMU drivers expecting interrutps to work, and at a time where with the new scheme, they have been disabled.
This causes timeouts internally which for some reason results in the PMU being unable to see the trackpad, among other issues, really it depends on the machine. Most of the time, we fail to properly adjust some clocks for suspend/resume so the results are not always predictable.
This patch fixes it by using IRQF_TIMER for both the PMU and the I2C interrupts. I prefer doing it this way than moving the call sites since I really want those platform functions to still be called after all drivers (and before sysdevs).
We also do a slight cleanup to via-pmu.c driver to make sure the ADB autopoll mask is handled correctly when doing bus resets
---
arch/powerpc/platforms/powermac/low_i2c.c +5 -2
@@ -540,8 +540,11 @@ static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np)/* Make sure IRQ is disabled */ kw_write_reg (reg_ier,0 ); -/* Request chip interrupt */ -if (request_irq (host->irq, kw_i2c_irq,0 ,"keywest i2c" , host)) +/* Request chip interrupt. We set IRQF_TIMER because we don't +* want that interrupt disabled between the 2 passes of driver +* suspend or we'll have issues running the pfuncs +*/ +if (request_irq (host->irq, kw_i2c_irq,IRQF_TIMER ,"keywest i2c" , host)) host->irq =NO_IRQ ; printk(KERN_INFO "KeyWest i2c @0x%08x irq %d %s\n",
drivers/macintosh/via-pmu.c +23 -17
@@ -405,7 +405,11 @@ static int __init via_pmu_start(void)printk (KERN_ERR "via-pmu: can't map interrupt\n" );return -ENODEV ; } -if (request_irq (irq, via_pmu_interrupt,0 ,"VIA-PMU" , (void *)0 )) { +/* We set IRQF_TIMER because we don't want the interrupt to be disabled +* between the 2 passes of driver suspend, we control our own disabling +* for that one +*/ +if (request_irq (irq, via_pmu_interrupt,IRQF_TIMER ,"VIA-PMU" , (void *)0 )) {printk (KERN_ERR "via-pmu: can't request irq %d\n" , irq);return -ENODEV ; }
@@ -419,7 +423,7 @@ static int __init via_pmu_start(void) gpio_irq =irq_of_parse_and_map (gpio_node,0 );if (gpio_irq !=NO_IRQ ) { -if (request_irq (gpio_irq, gpio1_interrupt,0 , +if (request_irq (gpio_irq, gpio1_interrupt,IRQF_TIMER ,"GPIO1 ADB" , (void *)0 ))printk (KERN_ERR "pmu: can't get irq %d" " (GPIO1)\n" , gpio_irq);
@@ -925,8 +929,7 @@ proc_write_options(struct file *file, const char __user *buffer,#ifdef CONFIG_ADB /* Send an ADB command */ -static int -pmu_send_request (struct adb_request *req,int sync) +static int pmu_send_request (struct adb_request *req,int sync) {int i, ret;
@@ -1005,16 +1008,11 @@ pmu_send_request(struct adb_request *req, int sync) }/* Enable/disable autopolling */ -static int -pmu_adb_autopoll (int devs) +static int __pmu_adb_autopoll (int devs) {struct adb_request req; -if ((vias ==NULL ) || (!pmu_fully_inited) || !pmu_has_adb) -return -ENXIO ; -if (devs) { - adb_dev_map = devs;pmu_request (&req,NULL ,5 ,PMU_ADB_CMD ,0 ,0x86 , adb_dev_map >>8 , adb_dev_map); pmu_adb_flags =2 ;
@@ -1027,9 +1025,17 @@ pmu_adb_autopoll(int devs)return 0 ; } +static int pmu_adb_autopoll (int devs) +{ +if ((vias ==NULL ) || (!pmu_fully_inited) || !pmu_has_adb) +return -ENXIO ; + + adb_dev_map = devs; +return __pmu_adb_autopoll (devs); +} +/* Reset the ADB bus */ -static int -pmu_adb_reset_bus (void ) +static int pmu_adb_reset_bus (void ) {struct adb_request req;int save_autopoll = adb_dev_map;
@@ -1038,13 +1044,13 @@ pmu_adb_reset_bus(void)return -ENXIO ;/* anyone got a better idea?? */ -pmu_adb_autopoll (0 ); +__pmu_adb_autopoll (0 ); - req.nbytes =5 ; + req.nbytes =4 ; req.done =NULL ; req.data[0 ] =PMU_ADB_CMD ; - req.data[1 ] =0 ; - req.data[2 ] =ADB_BUSRESET ; + req.data[1 ] =ADB_BUSRESET ; + req.data[2 ] =0 ; req.data[3 ] =0 ; req.data[4 ] =0 ; req.reply_len =0 ;
@@ -1056,7 +1062,7 @@ pmu_adb_reset_bus(void)pmu_wait_complete (&req);if (save_autopoll !=0 ) -pmu_adb_autopoll (save_autopoll); +__pmu_adb_autopoll (save_autopoll);return 0 ; }
Quoted 182 lines · Rafael J. Wysocki
Quoted 5 lines · Jan Scholz
Quoted 3 lines · Rafael J. Wysocki
Quoted 2 lines · Jan Scholz
"Rafael J. Wysocki" <[email protected]> writes:
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines · Jan Scholz
Quoted 6 lines
Quoted 4 lines · Rafael J. Wysocki
Quoted 3 lines · Jan Scholz
Quoted 1 line · Benjamin Herrenschmidt
Quoted 1 line
We are too late in the cycle to revert this commit and
it
Quoted 2 lines
Quoted 2 lines
really is needed to
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
fix a more serious issue. Nevertheless knowing that it
caused
Quoted 4 lines
Quoted 4 lines
the problem to
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
appear on your system is also important.
Ben, do you have an idea what may be going on here?
Does
Quoted 4 lines
Quoted 4 lines
__disable_irq()maskQuoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 1 line
the interrupt on this platform?
I suppose so :-) I'll have to check what's going on, it's
not
Quoted 11 lines
Quoted 11 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
immediately clear to me.
Cheers,
Ben.Quoted 2 lines
I'd like to see a boot log, preferably containing a
suspend-resume in which
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 1 line
Quoted 1 line
the problem was reproduced.
Here is a log from booting, through several suspend cycles,
until
Quoted 2 lines
Quoted 2 lines
the
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
trackpad disappeared. The first few suspends were done
while X was
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
running but from the console. As you can tell from lines
like
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
May 28 23:51:26 [kernel] adb devices: [2]: 2 c4 [3]: 3 1[7]: 7 1f
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
the trackpad was still present. The last suspend was done
from
Quoted 4 lines
Quoted 4 lines
within X,
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
here the trackpad did not make it.
May 28 23:58:09 [kernel] adb devices: [2]: 2 c4 [7]: 7 1fHowever, there have been cases, although not in this log,
were the
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
trackpad has been alive even when suspending from within
X.
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
This means the problem is probably timing-related.
Can you please try to comment out
suspend_device_irqs()andresume_device_irqs()indrivers/base/power/main.cand see ifthat
Quoted 2 lines
Quoted 2 lines
changes
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
anything? It's not entirely safe (well, that's why the calls
are
Quoted 5 lines
Quoted 5 lines
there after
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 2 lines
all), but hopefully the box won't hang during this test.
Tried that against v2.6.30-rc7 and it seems to fix the issue.
I did
Quoted 2 lines
Quoted 2 lines
~10
Quoted 1 line
Quoted 1 line
Quoted 1 line
suspend-resume cycles from the console (which worked just
like
Quoted 4 lines
Quoted 4 lines
before)
Quoted 3 lines
Quoted 3 lines
Quoted 1 line
and ~20 cycles from within X and the trackpad is still alive.
So, it seems we lose and interrupt during resume and that
confuses the
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
ADB controller driver or something like this. Do you use the
keyboard
Quoted 4 lines
Quoted 4 lines
or
Quoted 3 lines
Quoted 1 line
the trackpad as a wake-up device?
I do the wakeup by pressing keys on the keyboard. I'd try wakeup
via the
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
trackpad's button, but I have no idea how to activate that.
Quoted 2 lines
Please additionally try to go back to the original code, put '
sleepy_trackpad= 1' at the beginning ofdo_adb_reset_bus()in
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
drivers/macintosh/adb.cand see if the problem is reproduciblewith
Quoted 5 lines
Quoted 5 lines
that.
Quoted 4 lines
Tried this, but it does not help.
What I haven't noticed before is, that even if the trackpad
already
Quoted 1 line
Quoted 1 line
Quoted 1 line
disappeared, an additional suspend-resume cycle from the console
brought
Quoted 1 line
Quoted 1 line
Quoted 1 line
it back to life every time. Sometimes this worked from within X
as well,
Quoted 4 lines
Quoted 4 lines
Quoted 2 lines
just not with such a high probability as from the console. However, this is independent from '
sleepy_trackpad= 1'.OK, the patch is below, but I haven't had the opportunity to test
it yet.
Quoted 6 lines
Quoted 6 lines
Can you please check if it helps, on top of 2.6.30-rc8?
Best,
RafaelQuoted 6 lines
Quoted 6 lines
---
kernel/irq/manage.c| 12 ++++++++----1 file changed, 8 insertions(+), 4 deletions(-)Index:
linux-2.6/kernel/irq/manage.c===================================================================
Quoted 4 lines
Quoted 4 lines
kernel/irq/manage.c +0
-0@@ -187,9 +187,9 @@ static inline int setup_affinity(unsignevoid __disable_irq(struct
irq_desc*desc, unsigned int irq, boolsuspend)
Quoted 10 lines
Quoted 10 lines
{
if (suspend) {
- if (!desc->action || (desc->action->flags&IRQF_TIMER))
- return;
-desc->status|=IRQ_SUSPENDED;
+ if (desc->action&& !(desc->action->flags &IRQF_TIMER))
+desc->status|=IRQ_SUSPENDED|IRQ_DISABLED;
+ return;
}Quoted 4 lines
Quoted 4 lines
if (!desc->depth++) {
kernel/irq/manage.c +0
-0@@ -250,8 +250,12 @@ EXPORT_SYMBOL(disable_irq);void __enable_irq(struct
irq_desc*desc, unsigned int irq, boolresume)
Quoted 9 lines
Quoted 9 lines
{
- if (resume)
+ if (resume) {desc->status&= ~IRQ_SUSPENDED;
+ if (!desc->depth)
+desc->status&= ~IRQ_DISABLED;
+ return;
+ }Quoted 6 lines
Quoted 2 lines
switch (
desc->depth) {
case 0:Hi Rafael,
I tried your patch, but it makes my box crash on wakeup. It even
reset
Quoted 1 line
the hwclock which normally only happens with completely empty
battery
Quoted 1 line
and without AC.
Ouch, sorry.
In that case I have no idea why it breaks.
Johannes also reported a problem with MacBook that was most probably introduced
by the suspend reordering changes, but that one related to hibernation.Best,
Rafael
Quoted 1 line · Benjamin Herrenschmidt
Allright, I think I nailed it (finally !)
Great, thanks a lot for taking care of this!
Quoted 21 lines
Can everybody try this patch:
[PATCH] powerpc/pmac: Fix issues with sleep on some powerbooks
From: Benjamin Herrenschmidt <[email protected]>
Since the change of how interrupts are disabled during suspend, certain PowerBook models started exhibiting various issues during suspend or resume from sleep.
I finally tracked it down to the code that runs various "platform" functions (kind of little scripts extracted from the device-tree), which uses our i2c and PMU drivers expecting interrutps to work, and at a time where with the new scheme, they have been disabled.
This causes timeouts internally which for some reason results in the PMU being unable to see the trackpad, among other issues, really it depends on the machine. Most of the time, we fail to properly adjust some clocks for suspend/resume so the results are not always predictable.
Quoted 4 lines
This patch fixes it by using
IRQF_TIMERfor both the PMU and the I2C interrupts. I prefer doing it this way than moving the call sites since I really want those platform functions to still be called after all drivers (and before sysdevs).
Alternatively, you could introduce a new flag IRQF_NOSUSPEND and use that instead of IRQF_TIMER. That would be cleaner than using IRQF_TIMER for non-timer interrupts IMHO.
Quoted 126 lines
We also do a slight cleanup to
via-pmu.cdriver to make sure the ADB autopoll mask is handled correctly when doing bus resetsSigned-off-by Benjamin Herrenschmidt <[email protected]>---
arch/powerpc/platforms/powermac/low_i2c.c +5
-2@@ -540,8 +540,11 @@ static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np)/* Make sure IRQ is disabled */ kw_write_reg (reg_ier,0 ); -/* Request chip interrupt */ -if (request_irq (host->irq, kw_i2c_irq,0 ,"keywest i2c" , host)) +/* Request chip interrupt. We set IRQF_TIMER because we don't +* want that interrupt disabled between the 2 passes of driver +* suspend or we'll have issues running the pfuncs +*/ +if (request_irq (host->irq, kw_i2c_irq,IRQF_TIMER ,"keywest i2c" , host)) host->irq =NO_IRQ ; printk(KERN_INFO "KeyWest i2c @0x%08x irq %d %s\n",drivers/macintosh/via-pmu.c +23
-17@@ -405,7 +405,11 @@ static int __init via_pmu_start(void)printk (KERN_ERR "via-pmu: can't map interrupt\n" );return -ENODEV ; } -if (request_irq (irq, via_pmu_interrupt,0 ,"VIA-PMU" , (void *)0 )) { +/* We set IRQF_TIMER because we don't want the interrupt to be disabled +* between the 2 passes of driver suspend, we control our own disabling +* for that one +*/ +if (request_irq (irq, via_pmu_interrupt,IRQF_TIMER ,"VIA-PMU" , (void *)0 )) {printk (KERN_ERR "via-pmu: can't request irq %d\n" , irq);return -ENODEV ; }@@ -419,7 +423,7 @@ static int __init via_pmu_start(void) gpio_irq =irq_of_parse_and_map (gpio_node,0 );if (gpio_irq !=NO_IRQ ) { -if (request_irq (gpio_irq, gpio1_interrupt,0 , +if (request_irq (gpio_irq, gpio1_interrupt,IRQF_TIMER ,"GPIO1 ADB" , (void *)0 ))printk (KERN_ERR "pmu: can't get irq %d" " (GPIO1)\n" , gpio_irq);@@ -925,8 +929,7 @@ proc_write_options(struct file *file, const char __user *buffer,#ifdef CONFIG_ADB /* Send an ADB command */ -static int -pmu_send_request (struct adb_request *req,int sync) +static int pmu_send_request (struct adb_request *req,int sync) {int i, ret;@@ -1005,16 +1008,11 @@ pmu_send_request(struct adb_request *req, int sync) }/* Enable/disable autopolling */ -static int -pmu_adb_autopoll (int devs) +static int __pmu_adb_autopoll (int devs) {struct adb_request req; -if ((vias ==NULL ) || (!pmu_fully_inited) || !pmu_has_adb) -return -ENXIO ; -if (devs) { - adb_dev_map = devs;pmu_request (&req,NULL ,5 ,PMU_ADB_CMD ,0 ,0x86 , adb_dev_map >>8 , adb_dev_map); pmu_adb_flags =2 ;@@ -1027,9 +1025,17 @@ pmu_adb_autopoll(int devs)return 0 ; } +static int pmu_adb_autopoll (int devs) +{ +if ((vias ==NULL ) || (!pmu_fully_inited) || !pmu_has_adb) +return -ENXIO ; + + adb_dev_map = devs; +return __pmu_adb_autopoll (devs); +} +/* Reset the ADB bus */ -static int -pmu_adb_reset_bus (void ) +static int pmu_adb_reset_bus (void ) {struct adb_request req;int save_autopoll = adb_dev_map;@@ -1038,13 +1044,13 @@ pmu_adb_reset_bus(void)return -ENXIO ;/* anyone got a better idea?? */ -pmu_adb_autopoll (0 ); +__pmu_adb_autopoll (0 ); - req.nbytes =5 ; + req.nbytes =4 ; req.done =NULL ; req.data[0 ] =PMU_ADB_CMD ; - req.data[1 ] =0 ; - req.data[2 ] =ADB_BUSRESET ; + req.data[1 ] =ADB_BUSRESET ; + req.data[2 ] =0 ; req.data[3 ] =0 ; req.data[4 ] =0 ; req.reply_len =0 ;@@ -1056,7 +1062,7 @@ pmu_adb_reset_bus(void)pmu_wait_complete (&req);if (save_autopoll !=0 ) -pmu_adb_autopoll (save_autopoll); +__pmu_adb_autopoll (save_autopoll);return 0 ; }
Quoted 8 lines · Rafael J. Wysocki
Quoted 4 lines
This patch fixes it by using
IRQF_TIMERfor both the PMU and the I2C interrupts. I prefer doing it this way than moving the call sites since I really want those platform functions to still be called after all drivers (and before sysdevs).Alternatively, you could introduce a new flag
IRQF_NOSUSPENDand use that instead ofIRQF_TIMER. That would be cleaner than usingIRQF_TIMERfor non-timer interrupts IMHO.
I totally agree. The current patch is still good for stable though.
I'll send it to Greg after I've upstreamed it, we can introduce IRQF_NOSUSPEND in a second patch.
Ben.
Quoted 8 lines · Rafael J. Wysocki
Quoted 4 lines
This patch fixes it by using
IRQF_TIMERfor both the PMU and the I2C interrupts. I prefer doing it this way than moving the call sites since I really want those platform functions to still be called after all drivers (and before sysdevs).Alternatively, you could introduce a new flag
IRQF_NOSUSPENDand use that instead ofIRQF_TIMER. That would be cleaner than usingIRQF_TIMERfor non-timer interrupts IMHO.
I totally agree. The current patch is still good for stable though.
I'll send it to Greg after I've upstreamed it, we can introduce IRQF_NOSUSPEND in a second patch.
Ben.
Quoted 8 lines · Benjamin Herrenschmidt
Quoted 3 lines
Alternatively, you could introduce a new flag
IRQF_NOSUSPENDand use that instead ofIRQF_TIMER. That would be cleaner than usingIRQF_TIMERfor non-timer interrupts IMHO.I totally agree. The current patch is still good for stable though.
I'll send it to Greg after I've upstreamed it, we can introduce
IRQF_NOSUSPENDin a second patch.
How's upstreaming going? I can neither find the patch in Linus branch, nor in linux-next. Could it be that it got lost?
Cheers,
Jan
Quoted 6 lines · Jan Scholz
Quoted 4 lines · Benjamin Herrenschmidt
Quoted 3 lines
Alternatively, you could introduce a new flag
IRQF_NOSUSPENDand use that instead ofIRQF_TIMER. That would be cleaner than usingIRQF_TIMERfor non-timer interrupts IMHO.
Quoted 7 lines
Quoted 4 lines
I totally agree. The current patch is still good for stable though.
I'll send it to Greg after I've upstreamed it, we can introduce
IRQF_NOSUSPENDin a second patch.How's upstreaming going? I can neither find the patch in Linus branch, nor in linux-next. Could it be that it got lost?
More likely Ben didn't have the time to work on it.
Best,
Rafael
I have tested the patch against v2.6.30 and v2.6.31 and in both cases the bug is fixed.
Thanks,
Jan
Quoted 166 lines · Rafael J. Wysocki
Quoted 1 line · Benjamin Herrenschmidt
Allright, I think I nailed it (finally !)
Great, thanks a lot for taking care of this!
Quoted 21 lines
Can everybody try this patch:
[PATCH] powerpc/pmac: Fix issues with sleep on some powerbooks
From: Benjamin Herrenschmidt <[email protected]>
Since the change of how interrupts are disabled during suspend, certain PowerBook models started exhibiting various issues during suspend or resume from sleep.
I finally tracked it down to the code that runs various "platform" functions (kind of little scripts extracted from the device-tree), which uses our i2c and PMU drivers expecting interrutps to work, and at a time where with the new scheme, they have been disabled.
This causes timeouts internally which for some reason results in the PMU being unable to see the trackpad, among other issues, really it depends on the machine. Most of the time, we fail to properly adjust some clocks for suspend/resume so the results are not always predictable.
Quoted 4 lines
This patch fixes it by using
IRQF_TIMERfor both the PMU and the I2C interrupts. I prefer doing it this way than moving the call sites since I really want those platform functions to still be called after all drivers (and before sysdevs).Alternatively, you could introduce a new flag
IRQF_NOSUSPENDand use that instead ofIRQF_TIMER. That would be cleaner than usingIRQF_TIMERfor non-timer interrupts IMHO.Quoted 118 lines
We also do a slight cleanup to
via-pmu.cdriver to make sure the ADB autopoll mask is handled correctly when doing bus resetsSigned-off-by Benjamin Herrenschmidt <[email protected]>---
arch/powerpc/platforms/powermac/low_i2c.c +5
-2@@ -540,8 +540,11 @@ static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np)/* Make sure IRQ is disabled */ kw_write_reg (reg_ier,0 ); -/* Request chip interrupt */ -if (request_irq (host->irq, kw_i2c_irq,0 ,"keywest i2c" , host)) +/* Request chip interrupt. We set IRQF_TIMER because we don't +* want that interrupt disabled between the 2 passes of driver +* suspend or we'll have issues running the pfuncs +*/ +if (request_irq (host->irq, kw_i2c_irq,IRQF_TIMER ,"keywest i2c" , host)) host->irq =NO_IRQ ; printk(KERN_INFO "KeyWest i2c @0x%08x irq %d %s\n",drivers/macintosh/via-pmu.c +22
-16@@ -405,7 +405,11 @@ static int __init via_pmu_start(void)printk (KERN_ERR "via-pmu: can't map interrupt\n" );return -ENODEV ; } -if (request_irq (irq, via_pmu_interrupt,0 ,"VIA-PMU" , (void *)0 )) { +/* We set IRQF_TIMER because we don't want the interrupt to be disabled +* between the 2 passes of driver suspend, we control our own disabling +* for that one +*/ +if (request_irq (irq, via_pmu_interrupt,IRQF_TIMER ,"VIA-PMU" , (void *)0 )) {printk (KERN_ERR "via-pmu: can't request irq %d\n" , irq);return -ENODEV ; }@@ -419,7 +423,7 @@ static int __init via_pmu_start(void) gpio_irq =irq_of_parse_and_map (gpio_node,0 );if (gpio_irq !=NO_IRQ ) { -if (request_irq (gpio_irq, gpio1_interrupt,0 , +if (request_irq (gpio_irq, gpio1_interrupt,IRQF_TIMER ,"GPIO1 ADB" , (void *)0 ))printk (KERN_ERR "pmu: can't get irq %d" " (GPIO1)\n" , gpio_irq);@@ -925,8 +929,7 @@ proc_write_options(struct file *file, const char __user *buffer,#ifdef CONFIG_ADB /* Send an ADB command */ -static int -pmu_send_request (struct adb_request *req,int sync) +static int pmu_send_request (struct adb_request *req,int sync) {int i, ret;@@ -1005,16 +1008,11 @@ pmu_send_request(struct adb_request *req, int sync) }/* Enable/disable autopolling */ -static int -pmu_adb_autopoll (int devs) +static int __pmu_adb_autopoll (int devs) {struct adb_request req; -if ((vias ==NULL ) || (!pmu_fully_inited) || !pmu_has_adb) -return -ENXIO ; -if (devs) { - adb_dev_map = devs;pmu_request (&req,NULL ,5 ,PMU_ADB_CMD ,0 ,0x86 , adb_dev_map >>8 , adb_dev_map); pmu_adb_flags =2 ;@@ -1027,9 +1025,17 @@ pmu_adb_autopoll(int devs)return 0 ; } +static int pmu_adb_autopoll (int devs) +{ +if ((vias ==NULL ) || (!pmu_fully_inited) || !pmu_has_adb) +return -ENXIO ; + + adb_dev_map = devs; +return __pmu_adb_autopoll (devs); +} +/* Reset the ADB bus */ -static int -pmu_adb_reset_bus (void ) +static int pmu_adb_reset_bus (void ) {struct adb_request req;int save_autopoll = adb_dev_map;@@ -1038,13 +1044,13 @@ pmu_adb_reset_bus(void)return -ENXIO ;/* anyone got a better idea?? */ -pmu_adb_autopoll (0 ); +__pmu_adb_autopoll (0 ); - req.nbytes =5 ; + req.nbytes =4 ; req.done =NULL ; req.data[0 ] =PMU_ADB_CMD ; - req.data[1 ] =0 ; - req.data[2 ] =ADB_BUSRESET ; + req.data[1 ] =ADB_BUSRESET ; + req.data[2 ] =0 ; req.data[3 ] =0 ; req.data[4 ] =0 ; req.reply_len =0 ;drivers/macintosh/via-pmu.c pmu_adb_reset_bus(void) · line 1068
Quoted 8 lines
drivers/macintosh/via-pmu.c +1
-1@@ -1056,7 +1062,7 @@ pmu_adb_reset_bus(void)pmu_wait_complete (&req);if (save_autopoll !=0 ) -pmu_adb_autopoll (save_autopoll); +__pmu_adb_autopoll (save_autopoll);return 0 ; }--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Signature · 7 lines
Jan Scholz ____ ____ __ ___
( ___)(_ _) /__\ / __)
Frankfurt Institute for Advanced Studies )__) _)(_ /(__)\ \__ \
(__) (____)(__)(__)(___/
Goethe Universitaet Frankfurt
Ruth-Moufang-Str. 1 Tel. 069-798-47534
60438 Frankfurt am MainI have tested the patch against v2.6.30 and v2.6.31 and in both cases the bug is fixed.
Thanks,
Jan
Quoted 166 lines · Rafael J. Wysocki
Quoted 1 line · Benjamin Herrenschmidt
Allright, I think I nailed it (finally !)
Great, thanks a lot for taking care of this!
Quoted 21 lines
Can everybody try this patch:
[PATCH] powerpc/pmac: Fix issues with sleep on some powerbooks
From: Benjamin Herrenschmidt <[email protected]>
Since the change of how interrupts are disabled during suspend, certain PowerBook models started exhibiting various issues during suspend or resume from sleep.
I finally tracked it down to the code that runs various "platform" functions (kind of little scripts extracted from the device-tree), which uses our i2c and PMU drivers expecting interrutps to work, and at a time where with the new scheme, they have been disabled.
This causes timeouts internally which for some reason results in the PMU being unable to see the trackpad, among other issues, really it depends on the machine. Most of the time, we fail to properly adjust some clocks for suspend/resume so the results are not always predictable.
Quoted 4 lines
This patch fixes it by using
IRQF_TIMERfor both the PMU and the I2C interrupts. I prefer doing it this way than moving the call sites since I really want those platform functions to still be called after all drivers (and before sysdevs).Alternatively, you could introduce a new flag
IRQF_NOSUSPENDand use that instead ofIRQF_TIMER. That would be cleaner than usingIRQF_TIMERfor non-timer interrupts IMHO.Quoted 118 lines
We also do a slight cleanup to
via-pmu.cdriver to make sure the ADB autopoll mask is handled correctly when doing bus resetsSigned-off-by Benjamin Herrenschmidt <[email protected]>---
arch/powerpc/platforms/powermac/low_i2c.c +5
-2@@ -540,8 +540,11 @@ static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np)/* Make sure IRQ is disabled */ kw_write_reg (reg_ier,0 ); -/* Request chip interrupt */ -if (request_irq (host->irq, kw_i2c_irq,0 ,"keywest i2c" , host)) +/* Request chip interrupt. We set IRQF_TIMER because we don't +* want that interrupt disabled between the 2 passes of driver +* suspend or we'll have issues running the pfuncs +*/ +if (request_irq (host->irq, kw_i2c_irq,IRQF_TIMER ,"keywest i2c" , host)) host->irq =NO_IRQ ; printk(KERN_INFO "KeyWest i2c @0x%08x irq %d %s\n",drivers/macintosh/via-pmu.c +22
-16@@ -405,7 +405,11 @@ static int __init via_pmu_start(void)printk (KERN_ERR "via-pmu: can't map interrupt\n" );return -ENODEV ; } -if (request_irq (irq, via_pmu_interrupt,0 ,"VIA-PMU" , (void *)0 )) { +/* We set IRQF_TIMER because we don't want the interrupt to be disabled +* between the 2 passes of driver suspend, we control our own disabling +* for that one +*/ +if (request_irq (irq, via_pmu_interrupt,IRQF_TIMER ,"VIA-PMU" , (void *)0 )) {printk (KERN_ERR "via-pmu: can't request irq %d\n" , irq);return -ENODEV ; }@@ -419,7 +423,7 @@ static int __init via_pmu_start(void) gpio_irq =irq_of_parse_and_map (gpio_node,0 );if (gpio_irq !=NO_IRQ ) { -if (request_irq (gpio_irq, gpio1_interrupt,0 , +if (request_irq (gpio_irq, gpio1_interrupt,IRQF_TIMER ,"GPIO1 ADB" , (void *)0 ))printk (KERN_ERR "pmu: can't get irq %d" " (GPIO1)\n" , gpio_irq);@@ -925,8 +929,7 @@ proc_write_options(struct file *file, const char __user *buffer,#ifdef CONFIG_ADB /* Send an ADB command */ -static int -pmu_send_request (struct adb_request *req,int sync) +static int pmu_send_request (struct adb_request *req,int sync) {int i, ret;@@ -1005,16 +1008,11 @@ pmu_send_request(struct adb_request *req, int sync) }/* Enable/disable autopolling */ -static int -pmu_adb_autopoll (int devs) +static int __pmu_adb_autopoll (int devs) {struct adb_request req; -if ((vias ==NULL ) || (!pmu_fully_inited) || !pmu_has_adb) -return -ENXIO ; -if (devs) { - adb_dev_map = devs;pmu_request (&req,NULL ,5 ,PMU_ADB_CMD ,0 ,0x86 , adb_dev_map >>8 , adb_dev_map); pmu_adb_flags =2 ;@@ -1027,9 +1025,17 @@ pmu_adb_autopoll(int devs)return 0 ; } +static int pmu_adb_autopoll (int devs) +{ +if ((vias ==NULL ) || (!pmu_fully_inited) || !pmu_has_adb) +return -ENXIO ; + + adb_dev_map = devs; +return __pmu_adb_autopoll (devs); +} +/* Reset the ADB bus */ -static int -pmu_adb_reset_bus (void ) +static int pmu_adb_reset_bus (void ) {struct adb_request req;int save_autopoll = adb_dev_map;@@ -1038,13 +1044,13 @@ pmu_adb_reset_bus(void)return -ENXIO ;/* anyone got a better idea?? */ -pmu_adb_autopoll (0 ); +__pmu_adb_autopoll (0 ); - req.nbytes =5 ; + req.nbytes =4 ; req.done =NULL ; req.data[0 ] =PMU_ADB_CMD ; - req.data[1 ] =0 ; - req.data[2 ] =ADB_BUSRESET ; + req.data[1 ] =ADB_BUSRESET ; + req.data[2 ] =0 ; req.data[3 ] =0 ; req.data[4 ] =0 ; req.reply_len =0 ;drivers/macintosh/via-pmu.c pmu_adb_reset_bus(void) · line 1068
Quoted 8 lines
drivers/macintosh/via-pmu.c +1
-1@@ -1056,7 +1062,7 @@ pmu_adb_reset_bus(void)pmu_wait_complete (&req);if (save_autopoll !=0 ) -pmu_adb_autopoll (save_autopoll); +__pmu_adb_autopoll (save_autopoll);return 0 ; }--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Signature · 7 lines
Jan Scholz ____ ____ __ ___
( ___)(_ _) /__\ / __)
Frankfurt Institute for Advanced Studies )__) _)(_ /(__)\ \__ \
(__) (____)(__)(__)(___/
Goethe Universitaet Frankfurt
Ruth-Moufang-Str. 1 Tel. 069-798-47534
60438 Frankfurt am MainQuoted 1 line · Benjamin Herrenschmidt
Allright, I think I nailed it (finally !)
Great, thanks a lot for taking care of this!
Quoted 21 lines
Can everybody try this patch:
[PATCH] powerpc/pmac: Fix issues with sleep on some powerbooks
From: Benjamin Herrenschmidt <[email protected]>
Since the change of how interrupts are disabled during suspend, certain PowerBook models started exhibiting various issues during suspend or resume from sleep.
I finally tracked it down to the code that runs various "platform" functions (kind of little scripts extracted from the device-tree), which uses our i2c and PMU drivers expecting interrutps to work, and at a time where with the new scheme, they have been disabled.
This causes timeouts internally which for some reason results in the PMU being unable to see the trackpad, among other issues, really it depends on the machine. Most of the time, we fail to properly adjust some clocks for suspend/resume so the results are not always predictable.
Quoted 4 lines
This patch fixes it by using
IRQF_TIMERfor both the PMU and the I2C interrupts. I prefer doing it this way than moving the call sites since I really want those platform functions to still be called after all drivers (and before sysdevs).
Alternatively, you could introduce a new flag IRQF_NOSUSPEND and use that instead of IRQF_TIMER. That would be cleaner than using IRQF_TIMER for non-timer interrupts IMHO.
Quoted 126 lines
We also do a slight cleanup to
via-pmu.cdriver to make sure the ADB autopoll mask is handled correctly when doing bus resetsSigned-off-by Benjamin Herrenschmidt <[email protected]>---
arch/powerpc/platforms/powermac/low_i2c.c +5
-2@@ -540,8 +540,11 @@ static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np)/* Make sure IRQ is disabled */ kw_write_reg (reg_ier,0 ); -/* Request chip interrupt */ -if (request_irq (host->irq, kw_i2c_irq,0 ,"keywest i2c" , host)) +/* Request chip interrupt. We set IRQF_TIMER because we don't +* want that interrupt disabled between the 2 passes of driver +* suspend or we'll have issues running the pfuncs +*/ +if (request_irq (host->irq, kw_i2c_irq,IRQF_TIMER ,"keywest i2c" , host)) host->irq =NO_IRQ ; printk(KERN_INFO "KeyWest i2c @0x%08x irq %d %s\n",drivers/macintosh/via-pmu.c +23
-17@@ -405,7 +405,11 @@ static int __init via_pmu_start(void)printk (KERN_ERR "via-pmu: can't map interrupt\n" );return -ENODEV ; } -if (request_irq (irq, via_pmu_interrupt,0 ,"VIA-PMU" , (void *)0 )) { +/* We set IRQF_TIMER because we don't want the interrupt to be disabled +* between the 2 passes of driver suspend, we control our own disabling +* for that one +*/ +if (request_irq (irq, via_pmu_interrupt,IRQF_TIMER ,"VIA-PMU" , (void *)0 )) {printk (KERN_ERR "via-pmu: can't request irq %d\n" , irq);return -ENODEV ; }@@ -419,7 +423,7 @@ static int __init via_pmu_start(void) gpio_irq =irq_of_parse_and_map (gpio_node,0 );if (gpio_irq !=NO_IRQ ) { -if (request_irq (gpio_irq, gpio1_interrupt,0 , +if (request_irq (gpio_irq, gpio1_interrupt,IRQF_TIMER ,"GPIO1 ADB" , (void *)0 ))printk (KERN_ERR "pmu: can't get irq %d" " (GPIO1)\n" , gpio_irq);@@ -925,8 +929,7 @@ proc_write_options(struct file *file, const char __user *buffer,#ifdef CONFIG_ADB /* Send an ADB command */ -static int -pmu_send_request (struct adb_request *req,int sync) +static int pmu_send_request (struct adb_request *req,int sync) {int i, ret;@@ -1005,16 +1008,11 @@ pmu_send_request(struct adb_request *req, int sync) }/* Enable/disable autopolling */ -static int -pmu_adb_autopoll (int devs) +static int __pmu_adb_autopoll (int devs) {struct adb_request req; -if ((vias ==NULL ) || (!pmu_fully_inited) || !pmu_has_adb) -return -ENXIO ; -if (devs) { - adb_dev_map = devs;pmu_request (&req,NULL ,5 ,PMU_ADB_CMD ,0 ,0x86 , adb_dev_map >>8 , adb_dev_map); pmu_adb_flags =2 ;@@ -1027,9 +1025,17 @@ pmu_adb_autopoll(int devs)return 0 ; } +static int pmu_adb_autopoll (int devs) +{ +if ((vias ==NULL ) || (!pmu_fully_inited) || !pmu_has_adb) +return -ENXIO ; + + adb_dev_map = devs; +return __pmu_adb_autopoll (devs); +} +/* Reset the ADB bus */ -static int -pmu_adb_reset_bus (void ) +static int pmu_adb_reset_bus (void ) {struct adb_request req;int save_autopoll = adb_dev_map;@@ -1038,13 +1044,13 @@ pmu_adb_reset_bus(void)return -ENXIO ;/* anyone got a better idea?? */ -pmu_adb_autopoll (0 ); +__pmu_adb_autopoll (0 ); - req.nbytes =5 ; + req.nbytes =4 ; req.done =NULL ; req.data[0 ] =PMU_ADB_CMD ; - req.data[1 ] =0 ; - req.data[2 ] =ADB_BUSRESET ; + req.data[1 ] =ADB_BUSRESET ; + req.data[2 ] =0 ; req.data[3 ] =0 ; req.data[4 ] =0 ; req.reply_len =0 ;@@ -1056,7 +1062,7 @@ pmu_adb_reset_bus(void)pmu_wait_complete (&req);if (save_autopoll !=0 ) -pmu_adb_autopoll (save_autopoll); +__pmu_adb_autopoll (save_autopoll);return 0 ; }
PATCH 1/1 powerpc/pmac: Fix issues with sleep on some powerbooks
In reply to Rafael J. WysockiSince the change of how interrupts are disabled during suspend, certain PowerBook models started exhibiting various issues during suspend or resume from sleep.
I finally tracked it down to the code that runs various "platform" functions (kind of little scripts extracted from the device-tree), which uses our i2c and PMU drivers expecting interrutps to work, and at a time where with the new scheme, they have been disabled.
This causes timeouts internally which for some reason results in the PMU being unable to see the trackpad, among other issues, really it depends on the machine. Most of the time, we fail to properly adjust some clocks for suspend/resume so the results are not always predictable.
This patch fixes it by using IRQF_TIMER for both the PMU and the I2C interrupts. I prefer doing it this way than moving the call sites since I really want those platform functions to still be called after all drivers (and before sysdevs).
We also do a slight cleanup to via-pmu.c driver to make sure the ADB autopoll mask is handled correctly when doing bus resets
---
arch/powerpc/platforms/powermac/low_i2c.c +5 -2
@@ -540,8 +540,11 @@ static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np)/* Make sure IRQ is disabled */ kw_write_reg (reg_ier,0 ); -/* Request chip interrupt */ -if (request_irq (host->irq, kw_i2c_irq,0 ,"keywest i2c" , host)) +/* Request chip interrupt. We set IRQF_TIMER because we don't +* want that interrupt disabled between the 2 passes of driver +* suspend or we'll have issues running the pfuncs +*/ +if (request_irq (host->irq, kw_i2c_irq,IRQF_TIMER ,"keywest i2c" , host)) host->irq =NO_IRQ ; printk(KERN_INFO "KeyWest i2c @0x%08x irq %d %s\n",
drivers/macintosh/via-pmu.c +23 -17
@@ -405,7 +405,11 @@ static int __init via_pmu_start(void)printk (KERN_ERR "via-pmu: can't map interrupt\n" );return -ENODEV ; } -if (request_irq (irq, via_pmu_interrupt,0 ,"VIA-PMU" , (void *)0 )) { +/* We set IRQF_TIMER because we don't want the interrupt to be disabled +* between the 2 passes of driver suspend, we control our own disabling +* for that one +*/ +if (request_irq (irq, via_pmu_interrupt,IRQF_TIMER ,"VIA-PMU" , (void *)0 )) {printk (KERN_ERR "via-pmu: can't request irq %d\n" , irq);return -ENODEV ; }
@@ -419,7 +423,7 @@ static int __init via_pmu_start(void) gpio_irq =irq_of_parse_and_map (gpio_node,0 );if (gpio_irq !=NO_IRQ ) { -if (request_irq (gpio_irq, gpio1_interrupt,0 , +if (request_irq (gpio_irq, gpio1_interrupt,IRQF_TIMER ,"GPIO1 ADB" , (void *)0 ))printk (KERN_ERR "pmu: can't get irq %d" " (GPIO1)\n" , gpio_irq);
@@ -925,8 +929,7 @@ proc_write_options(struct file *file, const char __user *buffer,#ifdef CONFIG_ADB /* Send an ADB command */ -static int -pmu_send_request (struct adb_request *req,int sync) +static int pmu_send_request (struct adb_request *req,int sync) {int i, ret;
@@ -1005,16 +1008,11 @@ pmu_send_request(struct adb_request *req, int sync) }/* Enable/disable autopolling */ -static int -pmu_adb_autopoll (int devs) +static int __pmu_adb_autopoll (int devs) {struct adb_request req; -if ((vias ==NULL ) || (!pmu_fully_inited) || !pmu_has_adb) -return -ENXIO ; -if (devs) { - adb_dev_map = devs;pmu_request (&req,NULL ,5 ,PMU_ADB_CMD ,0 ,0x86 , adb_dev_map >>8 , adb_dev_map); pmu_adb_flags =2 ;
@@ -1027,9 +1025,17 @@ pmu_adb_autopoll(int devs)return 0 ; } +static int pmu_adb_autopoll (int devs) +{ +if ((vias ==NULL ) || (!pmu_fully_inited) || !pmu_has_adb) +return -ENXIO ; + + adb_dev_map = devs; +return __pmu_adb_autopoll (devs); +} +/* Reset the ADB bus */ -static int -pmu_adb_reset_bus (void ) +static int pmu_adb_reset_bus (void ) {struct adb_request req;int save_autopoll = adb_dev_map;
@@ -1038,13 +1044,13 @@ pmu_adb_reset_bus(void)return -ENXIO ;/* anyone got a better idea?? */ -pmu_adb_autopoll (0 ); +__pmu_adb_autopoll (0 ); - req.nbytes =5 ; + req.nbytes =4 ; req.done =NULL ; req.data[0 ] =PMU_ADB_CMD ; - req.data[1 ] =0 ; - req.data[2 ] =ADB_BUSRESET ; + req.data[1 ] =ADB_BUSRESET ; + req.data[2 ] =0 ; req.data[3 ] =0 ; req.data[4 ] =0 ; req.reply_len =0 ;
@@ -1056,7 +1062,7 @@ pmu_adb_reset_bus(void)pmu_wait_complete (&req);if (save_autopoll !=0 ) -pmu_adb_autopoll (save_autopoll); +__pmu_adb_autopoll (save_autopoll);return 0 ; }
Quoted 8 lines
So, it seems we lose and interrupt during resume and that confuses the ADB controller driver or something like this. Do you use the keyboard or the trackpad as a wake-up device?
Please additionally try to go back to the original code, put '
sleepy_trackpad= 1' at the beginning ofdo_adb_reset_bus()indrivers/macintosh/adb.cand see if the problem is reproducible with that.
Well, the ADB controller is also the PMU (drivers/macintosh/via-pmu.c) which is also the system controller, handles the actual sleep state, etc... :-)
That code is a bit itchy around the edges. I'm not sure it would have lost an interrupt, that sounds more like losing an IRQ would have broken it completely but it's not -impossible- (especially if it's the external GPIO or CB1 interrupt that notifies of an incoming ADB message).
I haven't managed to reproduce the problem yet here though. I'll see if I can with a titanium powerbook I have somewhere in storage that might be a bit closer to your machine than the wallstreet powerbook I've been using to test at work :-) My other powerbook test machine uses a USB trackpad.
Cheers,
Ben.