Skip to contentSkip to conversation

Typo: ETIMEOUT -> ETIMEDOUT

PATCH Applied Jean Delvare 2 participants 2 messages Jun 4, 2009

Subsystems (6)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Typo: ETIMEOUT -> ETIMEDOUT

---
 arch/arm/mach-sa1100/jornada720_ssp.c |    4 ++--
 drivers/net/qlge/qlge_main.c          |    2 +-
 drivers/net/usb/usbnet.c              |    2 +-
 drivers/staging/wlan-ng/hfa384x_usb.c |    2 +-
 kernel/rtmutex.c                      |    2 +-
 5 files changed, 6 insertions(+), 6 deletions(-)
arch/arm/mach-sa1100/jornada720_ssp.c +2 -2
@@ -54,7 +54,7 @@ EXPORT_SYMBOL(jornada_ssp_reverse);
  * timeout after <timeout> rounds. Needs mcu running before its called.
  *
  * returns : %mcu output on success
- *	   : %-ETIMEOUT on timeout
+ *	   : %-ETIMEDOUT on timeout
  */
 int jornada_ssp_byte(u8 byte)
 {
@@ -82,7 +82,7 @@ EXPORT_SYMBOL(jornada_ssp_byte);
  * jornada_ssp_inout - decide if input is command or trading byte
  *
  * returns : (jornada_ssp_byte(byte)) on success
- *         : %-ETIMEOUT on timeout failure
+ *         : %-ETIMEDOUT on timeout failure
  */
 int jornada_ssp_inout(u8 byte)
 {
drivers/net/qlge/qlge_main.c +1 -1
@@ -3174,7 +3174,7 @@ static int ql_adapter_reset(struct ql_ad
 
 	if (value & RST_FO_FR) {
 		QPRINTK(qdev, IFDOWN, ERR,
-			"ETIMEOUT!!! errored out of resetting the chip!\n");
+			"ETIMEDOUT!!! errored out of resetting the chip!\n");
 		status = -ETIMEDOUT;
 	}
 
drivers/net/usb/usbnet.c +1 -1
@@ -398,7 +398,7 @@ static void rx_complete (struct urb *urb
 
 	/* stalls need manual reset. this is rare ... except that
 	 * when going through USB 2.0 TTs, unplug appears this way.
-	 * we avoid the highspeed version of the ETIMEOUT/EILSEQ
+	 * we avoid the highspeed version of the ETIMEDOUT/EILSEQ
 	 * storm, recovering as needed.
 	 */
 	case -EPIPE:
drivers/staging/wlan-ng/hfa384x_usb.c +1 -1
@@ -2424,7 +2424,7 @@ int hfa384x_drvr_ramdl_write(hfa384x_t *
 *	0		success
 *	>0		f/w reported error - f/w status code
 *	<0		driver reported error
-*	-ETIMEOUT	timout waiting for the cmd regs to become
+*	-ETIMEDOUT	timout waiting for the cmd regs to become
 *			available, or waiting for the control reg
 *			to indicate the Aux port is enabled.
 *	-ENODATA	the buffer does NOT contain a valid PDA.
kernel/rtmutex.c +1 -1
@@ -875,7 +875,7 @@ EXPORT_SYMBOL_GPL(rt_mutex_lock_interrup
  * Returns:
  *  0 		on success
  * -EINTR 	when interrupted by a signal
- * -ETIMEOUT	when the timeout expired
+ * -ETIMEDOUT	when the timeout expired
  * -EDEADLK	when the lock would deadlock (when deadlock detection is on)
  */
 int
Signature · 1 line
Jean Delvare
Applied
#1 lore raw
Quoted 8 lines · Jean Delvare
---
 arch/arm/mach-sa1100/jornada720_ssp.c |    4 ++--
 drivers/net/qlge/qlge_main.c          |    2 +-
 drivers/net/usb/usbnet.c              |    2 +-
 drivers/staging/wlan-ng/hfa384x_usb.c |    2 +-
 kernel/rtmutex.c                      |    2 +-
 5 files changed, 6 insertions(+), 6 deletions(-)

Applied, thanks a lot Jean.

Signature · 1 line
Jiri Kosina