Skip to contentSkip to conversation

powerpc: Enable additional BAT registers in setup_745x_specifics()

PATCH New Gerhard Pircher 1 participant 1 message Jun 6, 2009 PowerPC

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 powerpc: Enable additional BAT registers in setup_745x_specifics()

Currently the kernel expects the additional four IBAT and DBAT registers to be available, but doesn't enable these registers on 745x CPUs, which have them disabled after reset. Thus set the HIGH_BAT_EN bit in HID0 register, if the corresponding MMU feature is defined.

---
 arch/powerpc/kernel/cpu_setup_6xx.S |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)
arch/powerpc/kernel/cpu_setup_6xx.S +3 -0
index 54f767e..1e9949e 100644
@@ -239,6 +239,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_L3CR)
 	ori	r11,r11,HID0_SGE | HID0_FOLD | HID0_BHTE
 	ori	r11,r11,HID0_LRSTK | HID0_BTIC
 	oris	r11,r11,HID0_DPM@h
+BEGIN_MMU_FTR_SECTION
+	oris	r11,r11,HID0_HIGH_BAT@h
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
 BEGIN_FTR_SECTION
 	xori	r11,r11,HID0_BTIC
 END_FTR_SECTION_IFSET(CPU_FTR_NO_BTIC)
Signature · 5 lines
1.5.6.5

-- 
GMX FreeDSL mit DSL 6.000 Flatrate und Telefonanschluss nur 17,95 Euro/mtl.!
http://dslspecial.gmx.de/freedsl-aktionspreis/?ac=OM.AD.PD003K11308T4569a