Skip to contentSkip to conversation

dmi: sanity check BIOS tables

PATCH In review Alan Cox 3 participants 5 messages Jun 6, 2009 – Jun 8, 2009 Dmi/smbios support

lore
Share & tools
lore

Alan Cox

author
#0 lore raw

PATCH 1/1 dmi: sanity check BIOS tables

From: Alan Cox <[email protected]>

There are various places where invalid DMI tables cause "undefined" kernel behaviour at boot. Be more robust.

---

 drivers/firmware/dmi_scan.c |   34 +++++++++++++++++++++++++++++-----
 1 files changed, 29 insertions(+), 5 deletions(-)
drivers/firmware/dmi_scan.c +29 -5
index 5f1b540..0bc0034 100644
@@ -20,21 +20,32 @@ static char dmi_empty_string[] = "        ";
  */
 static int dmi_initialized;
 
+static u8 *dmi_end;
+
 static const char * __init dmi_string_nosave(const struct dmi_header *dm, u8 s)
 {
 	const u8 *bp = ((u8 *) dm) + dm->length;
 
 	if (s) {
 		s--;
-		while (s > 0 && *bp) {
+		while (s > 0) {
+			/* Catch corrupt table ends before we walk into
+			   undefined mappings */
+			if (bp >= dmi_end)
+				goto invalid;
+			if (*bp == 0)
+				break;
 			bp += strlen(bp) + 1;
 			s--;
 		}
 
 		if (*bp != 0) {
-			size_t len = strlen(bp)+1;
+			/* Use strnlen in case we have a BIOS table error */
+			size_t len = strnlen(bp, dmi_end - bp) + 1;
 			size_t cmp_len = len > 8 ? 8 : len;
 
+			if (bp == dmi_end)
+				goto invalid;
 			if (!memcmp(bp, dmi_empty_string, cmp_len))
 				return dmi_empty_string;
 			return bp;
@@ -42,6 +53,9 @@ static const char * __init dmi_string_nosave(const struct dmi_header *dm, u8 s)
 	}
 
 	return "";
+invalid:
+	printk(KERN_ERR "dmi: table overrun - corrupt DMI tables ?\n");
+	return dmi_empty_string;
 }
 
 static char * __init dmi_string(const struct dmi_header *dm, u8 s)
@@ -109,9 +123,11 @@ static int __init dmi_walk_early(void (*decode)(const struct dmi_header *,
 	if (buf == NULL)
 		return -1;
 
+	/* Remember the end mark for string walking */
+	dmi_end = buf + dmi_len;
 	dmi_table(buf, dmi_len, dmi_num, decode, NULL);
-
 	dmi_iounmap(buf, dmi_len);
+
 	return 0;
 }
 
@@ -154,7 +170,7 @@ static void __init dmi_save_uuid(const struct dmi_header *dm, int slot, int inde
 	char *s;
 	int is_ff = 1, is_00 = 1, i;
 
-	if (dmi_ident[slot])
+	if (dmi_ident[slot] || d > dmi_end - 16)
 		return;
 
 	for (i = 0; i < 16 && (is_ff || is_00); i++) {
@@ -182,7 +198,7 @@ static void __init dmi_save_type(const struct dmi_header *dm, int slot, int inde
 	const u8 *d = (u8*) dm + index;
 	char *s;
 
-	if (dmi_ident[slot])
+	if (dmi_ident[slot] || d == dmi_end)
 		return;
 
 	s = dmi_alloc(4);
@@ -260,6 +276,11 @@ static void __init dmi_save_ipmi_device(const struct dmi_header *dm)
 	struct dmi_device *dev;
 	void * data;
 
+	if (((u8 *)dm) + dm->length > dmi_end) {
+		printk(KERN_ERR "dmi_save_ipmi_device: table overrun.\n");
+		return;
+	}
+
 	data = dmi_alloc(dm->length);
 	if (data == NULL) {
 		printk(KERN_ERR "dmi_save_ipmi_device: out of memory.\n");
@@ -285,6 +306,9 @@ static void __init dmi_save_extended_devices(const struct dmi_header *dm)
 {
 	const u8 *d = (u8*) dm + 5;
 
+	if (d >= dmi_end)
+		return;
+
 	/* Skip disabled device */
 	if ((*d & 0x80) == 0)
 		return;
#1 lore raw

drivers/firmware/dmi_scan.c static void __init dmi_save_ipmi_device(const struct dmi_header *dm) · line 279

Quoted 5 lines · Alan Cox
drivers/firmware/dmi_scan.c +1 -0
@@ -260,6 +276,11 @@ static void __init dmi_save_ipmi_device(const struct dmi_header *dm)
 	struct dmi_device *dev;
 	void * data;
 
+	if (((u8 *)dm) + dm->length > dmi_end) {

I think this should be >= too.

Quoted 4 lines
drivers/firmware/dmi_scan.c +4 -0
+		printk(KERN_ERR "dmi_save_ipmi_device: table overrun.\n");
+		return;
+	}
+
#2 lore raw
Quoted 13 lines · Jiri Slaby

drivers/firmware/dmi_scan.c static void __init dmi_save_ipmi_device(const struct dmi_header *dm) · line 279

Quoted 5 lines · Alan Cox
drivers/firmware/dmi_scan.c +1 -0
@@ -260,6 +276,11 @@ static void __init dmi_save_ipmi_device(const struct dmi_header *dm)
       struct dmi_device *dev;
       void * data;
 
+     if (((u8 *)dm) + dm->length > dmi_end) {

I think this should be >= too.

Quoted 4 lines
drivers/firmware/dmi_scan.c +4 -0
+             printk(KERN_ERR "dmi_save_ipmi_device: table overrun.\n");
+             return;
+     }
+

I've tried this patch, both with Jiri's suggestion and without. Neither makes a difference, except for slightly changing the output ( new output at http://tinypic.com/r/2di4mlg/5 )

Let me know if I can provide anything more to help debug.

Thanks,
Jeff

#3 lore raw
Quoted 1 line · Jeff Mitchell

Let me know if I can provide anything more to help debug.

It dies on DMI_BIOS_VERSION. I don't see it, maybe I'm blind, could you provide
dmidecode -u -t 0
?

#4 lore raw
Quoted 8 lines · Jiri Slaby
Quoted 1 line · Jeff Mitchell

Let me know if I can provide anything more to help debug.

It dies on DMI_BIOS_VERSION. I don't see it, maybe I'm blind, could you provide
dmidecode -u -t 0
?

Sure. It's below. Thanks, again.

# dmidecode 2.9
SMBIOS 2.31 present.

Handle 0x0000, DMI type 0, 20 bytes

        Header and Data:
                00 14 00 00 01 02 91 E7 03 00 90 5F 00 00 00 00
                00 00 82 01
        Strings:
                50 68 6F 65 6E 69 78 20 54 65 63 68 6E 6F 6C 6F
                67 69 65 73 20 4C 54 44 00
                "Phoenix Technologies LTD"
                36 2E 30 30 00
                "6.00"
                30 31 2F 33 30 2F 32 30 30 38 00
                "01/30/2008"