ixgbe: use rx_buffer_info->dma instead of nr_frags to determine skb unmap
Subsystems (2)
PATCH 1/10 ixgbe: use rx_buffer_info->dma instead of nr_frags to determine skb unmap
From: Alexander Duyck <[email protected]>
This patch changes the driver so that it uses rx_buffer_info->dma to determine if it needs to unmap the page instead of sh_info->nr_frags. This helps to prevent a cache line miss when receiving small packets as the rx_buffer_info data should already be in the cache.
---
drivers/net/ixgbe/ixgbe_main.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/net/ixgbe/ixgbe_main.c +1 -1
@@ -708,7 +708,7 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,prefetch (skb->data -NET_IP_ALIGN ); rx_buffer_info->skb =NULL ; -if (len && !skb_shinfo (skb)->nr_frags) { +if (rx_buffer_info->dma) {pci_unmap_single (pdev, rx_buffer_info->dma, rx_ring->rx_buf_len,PCI_DMA_FROMDEVICE );
PATCH 2/10 ixgbe: move v_idx into q_vector and use as index only
From: Alexander Duyck <[email protected]>
The v_idx value was being used as both a bitmask and an index. This change makes it so that the q_vector contains the index and allows for much of the code to be simplified since disabling a q_vector involves only clearing one bit in the interrupt bitmask.
---
drivers/net/ixgbe/ixgbe.h | 11 +- drivers/net/ixgbe/ixgbe_ethtool.c | 5 - drivers/net/ixgbe/ixgbe_main.c | 227 ++++++++++++++++++------------------- 3 files changed, 117 insertions(+), 126 deletions(-)
drivers/net/ixgbe/ixgbe.h +5 -6
@@ -148,10 +148,6 @@ struct ixgbe_ring {int cpu;#endif struct ixgbe_queue_stats stats; -u64 v_idx;/* maps directly to the index for this ring in the hardware -* vector array, can also be used for finding the bit in EICR -* and friends that represents the vector for this ring */ -u16 work_limit;/* max work per interrupt */ u16 rx_buf_len;
@@ -193,6 +189,9 @@ struct ixgbe_ring_feature {*/ struct ixgbe_q_vector {struct ixgbe_adapter *adapter; +unsigned int v_idx;/* index of q_vector within array, also used for +* finding the bit in EICR and friends that +* represents the vector for this ring */ struct napi_struct napi; DECLARE_BITMAP(rxr_idx, MAX_RX_QUEUES); /* Rx ring indices */ DECLARE_BITMAP(txr_idx, MAX_TX_QUEUES); /* Tx ring indices */
@@ -201,7 +200,6 @@ struct ixgbe_q_vector {u8 tx_itr;u8 rx_itr;u32 eitr; -u32 v_idx;/* vector index in list */ };/* Helper macros to switch between ints/sec and what the register uses.
@@ -401,7 +399,8 @@ extern void ixgbe_free_tx_resources(struct ixgbe_adapter *, struct ixgbe_ring *)extern void ixgbe_update_stats (struct ixgbe_adapter *adapter);extern int ixgbe_init_interrupt_scheme (struct ixgbe_adapter *adapter);extern void ixgbe_clear_interrupt_scheme (struct ixgbe_adapter *adapter); -extern void ixgbe_write_eitr (struct ixgbe_adapter *,int ,u32 ); +extern void ixgbe_write_eitr (struct ixgbe_q_vector *); +extern int ethtool_ioctl (struct ifreq *ifr);#ifdef IXGBE_FCOE extern void ixgbe_configure_fcoe (struct ixgbe_adapter *adapter); extern int ixgbe_fso(struct ixgbe_adapter *adapter,
drivers/net/ixgbe/ixgbe_ethtool.c +1 -4
@@ -840,7 +840,6 @@ static int ixgbe_set_ringparam(struct net_device *netdev, } goto err_setup; } - temp_tx_ring[i].v_idx = adapter->tx_ring[i].v_idx; } need_update = true; }
@@ -870,7 +869,6 @@ static int ixgbe_set_ringparam(struct net_device *netdev, } goto err_setup; } - temp_rx_ring[i].v_idx = adapter->rx_ring[i].v_idx; } need_update = true; }
@@ -1987,8 +1985,7 @@ static int ixgbe_set_coalesce(struct net_device *netdev,else /* rx only or mixed */ q_vector->eitr = adapter->eitr_param; -ixgbe_write_eitr (adapter, i, -EITR_INTS_PER_SEC_TO_REG (q_vector->eitr)); +ixgbe_write_eitr (q_vector); }return 0 ;
drivers/net/ixgbe/ixgbe_main.c +111 -116
376 lines not on this page · raw message
PATCH 3/10 ixgbe: move tx processing into NAPI context
In reply to Jeff KirsherFrom: Alexander Duyck <[email protected]>
This patch moves the tx cleanup processing out of the MSI-X interrupt processing and gives it it's own napi routine. This allows the driver to process TX cleanup in a polling context instead of in an interrupt context which prevents TX from starving RX.
---
drivers/net/ixgbe/ixgbe_main.c | 141 ++++++++++++++++++++++++++++++---------- 1 files changed, 107 insertions(+), 34 deletions(-)
drivers/net/ixgbe/ixgbe_main.c +107 -34
@@ -1178,17 +1178,16 @@ static irqreturn_t ixgbe_msix_clean_tx(int irq, void *data) r_idx =find_first_bit (q_vector->txr_idx, adapter->num_tx_queues);for (i =0 ; i < q_vector->txr_count; i++) { tx_ring = &(adapter->tx_ring[r_idx]); -#ifdef CONFIG_IXGBE_DCA -if (adapter->flags &IXGBE_FLAG_DCA_ENABLED ) -ixgbe_update_tx_dca (adapter, tx_ring); -#endif tx_ring->total_bytes =0 ; tx_ring->total_packets =0 ; -ixgbe_clean_tx_irq (q_vector, tx_ring); r_idx =find_next_bit (q_vector->txr_idx, adapter->num_tx_queues, r_idx +1 ); } +/* disable interrupts on this vector only */ +ixgbe_irq_disable_queues (adapter, ((u64 )1 << q_vector->v_idx)); +napi_schedule (&q_vector->napi); +return IRQ_HANDLED ; }
@@ -1228,8 +1227,36 @@ static irqreturn_t ixgbe_msix_clean_rx(int irq, void *data)static irqreturn_t ixgbe_msix_clean_many (int irq,void *data) { -ixgbe_msix_clean_rx (irq, data); -ixgbe_msix_clean_tx (irq, data); +struct ixgbe_q_vector *q_vector = data; +struct ixgbe_adapter *adapter = q_vector->adapter; +struct ixgbe_ring *ring; +int r_idx; +int i; + +if (!q_vector->txr_count && !q_vector->rxr_count) +return IRQ_HANDLED ; + + r_idx =find_first_bit (q_vector->txr_idx, adapter->num_tx_queues); +for (i =0 ; i < q_vector->txr_count; i++) { + ring = &(adapter->tx_ring[r_idx]); + ring->total_bytes =0 ; + ring->total_packets =0 ; + r_idx =find_next_bit (q_vector->txr_idx, adapter->num_tx_queues, + r_idx +1 ); + } + + r_idx =find_first_bit (q_vector->rxr_idx, adapter->num_rx_queues); +for (i =0 ; i < q_vector->rxr_count; i++) { + ring = &(adapter->rx_ring[r_idx]); + ring->total_bytes =0 ; + ring->total_packets =0 ; + r_idx =find_next_bit (q_vector->rxr_idx, adapter->num_rx_queues, + r_idx +1 ); + } + +/* disable interrupts on this vector only */ +ixgbe_irq_disable_queues (adapter, ((u64 )1 << q_vector->v_idx)); +napi_schedule (&q_vector->napi);return IRQ_HANDLED ; }
@@ -1274,21 +1301,34 @@ static int ixgbe_clean_rxonly(struct napi_struct *napi, int budget) }/** -* ixgbe_clean_rxonly_many - msix (aka one shot) rx clean routine +* ixgbe_clean_rxtx_many - msix (aka one shot) rx clean routine * @napi: napi struct with our devices info in it * @budget: amount of work driver is allowed to do this pass, in packets * * This function will clean more than one rx queue associated with a * q_vector. **/ -static int ixgbe_clean_rxonly_many (struct napi_struct *napi,int budget) +static int ixgbe_clean_rxtx_many (struct napi_struct *napi,int budget) {struct ixgbe_q_vector *q_vector = container_of(napi, struct ixgbe_q_vector, napi);struct ixgbe_adapter *adapter = q_vector->adapter; -struct ixgbe_ring *rx_ring =NULL ; +struct ixgbe_ring *ring =NULL ;int work_done =0 , i;long r_idx; +bool tx_clean_complete = true; + + r_idx =find_first_bit (q_vector->txr_idx, adapter->num_tx_queues); +for (i =0 ; i < q_vector->txr_count; i++) { + ring = &(adapter->tx_ring[r_idx]); +#ifdef CONFIG_IXGBE_DCA +if (adapter->flags &IXGBE_FLAG_DCA_ENABLED ) +ixgbe_update_tx_dca (adapter, ring); +#endif + tx_clean_complete &=ixgbe_clean_tx_irq (q_vector, ring); + r_idx =find_next_bit (q_vector->txr_idx, adapter->num_tx_queues, + r_idx +1 ); + }/* attempt to distribute budget to each queue fairly, but don't allow * the budget to go below 1 because we'll exit polling */
@@ -1296,18 +1336,18 @@ static int ixgbe_clean_rxonly_many(struct napi_struct *napi, int budget) budget =max (budget,1 ); r_idx =find_first_bit (q_vector->rxr_idx, adapter->num_rx_queues);for (i =0 ; i < q_vector->rxr_count; i++) { - rx_ring = &(adapter->rx_ring[r_idx]); + ring = &(adapter->rx_ring[r_idx]);#ifdef CONFIG_IXGBE_DCA if (adapter->flags &IXGBE_FLAG_DCA_ENABLED ) -ixgbe_update_rx_dca (adapter, rx_ring); +ixgbe_update_rx_dca (adapter, ring);#endif -ixgbe_clean_rx_irq (q_vector, rx_ring, &work_done, budget); +ixgbe_clean_rx_irq (q_vector, ring, &work_done, budget); r_idx =find_next_bit (q_vector->rxr_idx, adapter->num_rx_queues, r_idx +1 ); } r_idx =find_first_bit (q_vector->rxr_idx, adapter->num_rx_queues); - rx_ring = &(adapter->rx_ring[r_idx]); + ring = &(adapter->rx_ring[r_idx]);/* If all Rx work done, exit the polling mode */ if (work_done < budget) {napi_complete (napi);
@@ -1321,6 +1361,46 @@ static int ixgbe_clean_rxonly_many(struct napi_struct *napi, int budget)return work_done; } + +/** +* ixgbe_clean_txonly - msix (aka one shot) tx clean routine +* @napi: napi struct with our devices info in it +* @budget: amount of work driver is allowed to do this pass, in packets +* +* This function is optimized for cleaning one queue only on a single +* q_vector!!! +**/ +static int ixgbe_clean_txonly (struct napi_struct *napi,int budget) +{ +struct ixgbe_q_vector *q_vector = + container_of(napi, struct ixgbe_q_vector, napi); +struct ixgbe_adapter *adapter = q_vector->adapter; +struct ixgbe_ring *tx_ring =NULL ; +int work_done =0 ; +long r_idx; + + r_idx =find_first_bit (q_vector->txr_idx, adapter->num_tx_queues); + tx_ring = &(adapter->tx_ring[r_idx]); +#ifdef CONFIG_IXGBE_DCA +if (adapter->flags &IXGBE_FLAG_DCA_ENABLED ) +ixgbe_update_tx_dca (adapter, tx_ring); +#endif + +if (!ixgbe_clean_tx_irq (q_vector, tx_ring)) + work_done = budget; + +/* If all Rx work done, exit the polling mode */ +if (work_done < budget) { +napi_complete (napi); +if (adapter->itr_setting &1 ) +ixgbe_set_itr_msix (q_vector); +if (!test_bit (__IXGBE_DOWN, &adapter->state)) +ixgbe_irq_enable_queues (adapter, ((u64 )1 << q_vector->v_idx)); + } + +return work_done; +} +static inline void map_vector_to_rxq (struct ixgbe_adapter *a,int v_idx,int r_idx) {
@@ -2213,12 +2293,15 @@ static void ixgbe_napi_enable_all(struct ixgbe_adapter *adapter)for (q_idx =0 ; q_idx < q_vectors; q_idx++) {struct napi_struct *napi; q_vector = adapter->q_vector[q_idx]; -if (!q_vector->rxr_count) -continue ; napi = &q_vector->napi; -if ((adapter->flags &IXGBE_FLAG_MSIX_ENABLED ) && - (q_vector->rxr_count >1 )) - napi->poll = &ixgbe_clean_rxonly_many; +if (adapter->flags &IXGBE_FLAG_MSIX_ENABLED ) { +if (!q_vector->rxr_count || !q_vector->txr_count) { +if (q_vector->txr_count ==1 ) + napi->poll = &ixgbe_clean_txonly; +else if (q_vector->rxr_count ==1 ) + napi->poll = &ixgbe_clean_rxonly; + } + }napi_enable (napi); }
@@ -2236,8 +2319,6 @@ static void ixgbe_napi_disable_all(struct ixgbe_adapter *adapter)for (q_idx =0 ; q_idx < q_vectors; q_idx++) { q_vector = adapter->q_vector[q_idx]; -if (!q_vector->rxr_count) -continue ;napi_disable (&q_vector->napi); } }
@@ -3321,7 +3402,7 @@ static int ixgbe_alloc_q_vectors(struct ixgbe_adapter *adapter)if (adapter->flags &IXGBE_FLAG_MSIX_ENABLED ) { num_q_vectors = adapter->num_msix_vectors -NON_Q_VECTORS ; napi_vectors = adapter->num_rx_queues; - poll = &ixgbe_clean_rxonly; + poll = &ixgbe_clean_rxtx_many; }else { num_q_vectors =1 ; napi_vectors =1 ;
@@ -3335,9 +3416,7 @@ static int ixgbe_alloc_q_vectors(struct ixgbe_adapter *adapter) q_vector->adapter = adapter; q_vector->eitr = adapter->eitr_param; q_vector->v_idx = q_idx; -if (q_idx < napi_vectors) -netif_napi_add (adapter->netdev, &q_vector->napi, - (*poll),64 ); +netif_napi_add (adapter->netdev, &q_vector->napi, (*poll),64 ); adapter->q_vector[q_idx] = q_vector; }
@@ -3365,22 +3444,16 @@ err_out:static void ixgbe_free_q_vectors (struct ixgbe_adapter *adapter) {int q_idx, num_q_vectors; -int napi_vectors; -if (adapter->flags &IXGBE_FLAG_MSIX_ENABLED ) { +if (adapter->flags &IXGBE_FLAG_MSIX_ENABLED ) num_q_vectors = adapter->num_msix_vectors -NON_Q_VECTORS ; - napi_vectors = adapter->num_rx_queues; - }else { +else num_q_vectors =1 ; - napi_vectors =1 ; - }for (q_idx =0 ; q_idx < num_q_vectors; q_idx++) {struct ixgbe_q_vector *q_vector = adapter->q_vector[q_idx]; - adapter->q_vector[q_idx] =NULL ; -if (q_idx < napi_vectors) -netif_napi_del (&q_vector->napi); +netif_napi_del (&q_vector->napi);kfree (q_vector); } }
PATCH 4/10 ixgbe: Add a second feature flags variable, move HW RSC capability there
In reply to Jeff KirsherFrom: Peter P Waskiewicz Jr <[email protected]>
This adds a second feature flag variable to use for future feature expansion. Add HW RSC to this new feature flags variable.
---
drivers/net/ixgbe/ixgbe.h | 5 +++-- drivers/net/ixgbe/ixgbe_ethtool.c | 6 +++--- drivers/net/ixgbe/ixgbe_main.c | 12 ++++++------ 3 files changed, 12 insertions(+), 11 deletions(-)
drivers/net/ixgbe/ixgbe.h +3 -2
@@ -317,10 +317,11 @@ struct ixgbe_adapter {#define IXGBE_FLAG_IN_WATCHDOG_TASK (u32)(1 << 23)#define IXGBE_FLAG_IN_SFP_LINK_TASK (u32)(1 << 24)#define IXGBE_FLAG_IN_SFP_MOD_TASK (u32)(1 << 25) -#define IXGBE_FLAG_RSC_CAPABLE (u32)(1 << 26) -#define IXGBE_FLAG_RSC_ENABLED (u32)(1 << 27)#define IXGBE_FLAG_FCOE_ENABLED (u32)(1 << 29) +u32 flags2; +#define IXGBE_FLAG2_RSC_CAPABLE (u32)(1) +#define IXGBE_FLAG2_RSC_ENABLED (u32)(1 << 1)/* default to trying for four seconds */ #define IXGBE_TRY_LINK_TIMEOUT (4 * HZ)
drivers/net/ixgbe/ixgbe_ethtool.c +3 -3
@@ -1997,13 +1997,13 @@ static int ixgbe_set_flags(struct net_device *netdev, u32 data)ethtool_op_set_flags (netdev, data); -if (!(adapter->flags &IXGBE_FLAG_RSC_CAPABLE )) +if (!(adapter->flags &IXGBE_FLAG2_RSC_CAPABLE ))return 0 ;/* if state changes we need to update adapter->flags and reset */ if ((!!(data Ð_FLAG_LRO )) != - (!!(adapter->flags &IXGBE_FLAG_RSC_ENABLED ))) { - adapter->flags ^=IXGBE_FLAG_RSC_ENABLED ; + (!!(adapter->flags &IXGBE_FLAG2_RSC_ENABLED ))) { + adapter->flags ^=IXGBE_FLAG2_RSC_ENABLED ;if (netif_running (netdev))ixgbe_reinit_locked (adapter);else
drivers/net/ixgbe/ixgbe_main.c +6 -6
@@ -748,7 +748,7 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,prefetch (next_rxd); cleaned_count++; -if (adapter->flags &IXGBE_FLAG_RSC_CAPABLE ) +if (adapter->flags &IXGBE_FLAG2_RSC_CAPABLE ) rsc_count =ixgbe_get_rsc_count (rx_desc);if (rsc_count) {
@@ -1968,7 +1968,7 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)IXGBE_WRITE_REG (hw,IXGBE_PSRTYPE (0 ), psrtype); } }else { -if (!(adapter->flags &IXGBE_FLAG_RSC_ENABLED ) && +if (!(adapter->flags &IXGBE_FLAG2_RSC_ENABLED ) && (netdev->mtu <=ETH_DATA_LEN )) rx_buf_len =MAXIMUM_ETHERNET_VLAN_SIZE ;else
@@ -2097,7 +2097,7 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)IXGBE_WRITE_REG (hw,IXGBE_RDRXCTL , rdrxctl); } -if (adapter->flags &IXGBE_FLAG_RSC_ENABLED ) { +if (adapter->flags &IXGBE_FLAG2_RSC_ENABLED ) {/* Enable 82599 HW-RSC */ for (i =0 ; i < adapter->num_rx_queues; i++) { j = adapter->rx_ring[i].reg_idx;
@@ -3632,8 +3632,8 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter) adapter->max_msix_q_vectors =MAX_MSIX_Q_VECTORS_82598 ; }else if (hw->mac.type == ixgbe_mac_82599EB) { adapter->max_msix_q_vectors =MAX_MSIX_Q_VECTORS_82599 ; - adapter->flags |=IXGBE_FLAG_RSC_CAPABLE ; - adapter->flags |=IXGBE_FLAG_RSC_ENABLED ; + adapter->flags |=IXGBE_FLAG2_RSC_CAPABLE ; + adapter->flags |=IXGBE_FLAG2_RSC_ENABLED ;#ifdef IXGBE_FCOE adapter->flags |=IXGBE_FLAG_FCOE_ENABLED ; adapter->ring_feature[RING_F_FCOE ].indices =IXGBE_FCRETA_SIZE ;
@@ -5323,7 +5323,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,if (pci_using_dac) netdev->features |=NETIF_F_HIGHDMA ; -if (adapter->flags &IXGBE_FLAG_RSC_ENABLED ) +if (adapter->flags &IXGBE_FLAG2_RSC_ENABLED ) netdev->features |=NETIF_F_LRO ;/* make sure the EEPROM is good */
PATCH 5/10 ixgbe: Add hardware defines for Flow Director for 82599
In reply to Jeff KirsherFrom: Peter P Waskiewicz Jr <[email protected]>
Flow Director is a Rx filter mechanism designed to match Rx flows back to the same CPU that the flow's Tx occurred from. This patch adds the first piece, the defines for the hardware registers, to enable this feature in 82599 hardware.
---
drivers/net/ixgbe/ixgbe_type.h | 147 ++++++++++++++++++++++++++++++++++++++++ 1 files changed, 147 insertions(+), 0 deletions(-)
drivers/net/ixgbe/ixgbe_type.h +147 -0
@@ -231,6 +231,34 @@#define IXGBE_RETA (_i) (0x05C00 + ((_i) * 4))/* 32 of these (0-31) */ #define IXGBE_RSSRK (_i) (0x05C80 + ((_i) * 4))/* 10 of these (0-9) */ +/* Flow Director registers */ +#define IXGBE_FDIRCTRL 0x0EE00 +#define IXGBE_FDIRHKEY 0x0EE68 +#define IXGBE_FDIRSKEY 0x0EE6C +#define IXGBE_FDIRDIP4M 0x0EE3C +#define IXGBE_FDIRSIP4M 0x0EE40 +#define IXGBE_FDIRTCPM 0x0EE44 +#define IXGBE_FDIRUDPM 0x0EE48 +#define IXGBE_FDIRIP6M 0x0EE74 +#define IXGBE_FDIRM 0x0EE70 + +/* Flow Director Stats registers */ +#define IXGBE_FDIRFREE 0x0EE38 +#define IXGBE_FDIRLEN 0x0EE4C +#define IXGBE_FDIRUSTAT 0x0EE50 +#define IXGBE_FDIRFSTAT 0x0EE54 +#define IXGBE_FDIRMATCH 0x0EE58 +#define IXGBE_FDIRMISS 0x0EE5C + +/* Flow Director Programming registers */ +#define IXGBE_FDIRSIPv6 (_i) (0x0EE0C + ((_i) * 4))/* 3 of these (0-2) */ +#define IXGBE_FDIRIPSA 0x0EE18 +#define IXGBE_FDIRIPDA 0x0EE1C +#define IXGBE_FDIRPORT 0x0EE20 +#define IXGBE_FDIRVLAN 0x0EE24 +#define IXGBE_FDIRHASH 0x0EE28 +#define IXGBE_FDIRCMD 0x0EE2C +/* Transmit DMA registers */ #define IXGBE_TDBAL (_i) (0x06000 + ((_i) * 0x40))/* 32 of these (0-31)*/ #define IXGBE_TDBAH (_i) (0x06004 + ((_i) * 0x40))
@@ -1652,6 +1680,9 @@#define IXGBE_RXDADV_ERR_SHIFT 20/* RDESC.ERRORS shift */ #define IXGBE_RXDADV_ERR_FCEOFE 0x80000000/* FCoEFe/IPE */ #define IXGBE_RXDADV_ERR_FCERR 0x00700000/* FCERR/FDIRERR */ +#define IXGBE_RXDADV_ERR_FDIR_LEN 0x00100000/* FDIR Length error */ +#define IXGBE_RXDADV_ERR_FDIR_DROP 0x00200000/* FDIR Drop error */ +#define IXGBE_RXDADV_ERR_FDIR_COLL 0x00400000/* FDIR Collision error */ #define IXGBE_RXDADV_ERR_HBO 0x00800000/*Header Buffer Overflow */ #define IXGBE_RXDADV_ERR_CE 0x01000000/* CRC Error */ #define IXGBE_RXDADV_ERR_LE 0x02000000/* Length Error */
@@ -1784,6 +1815,82 @@#endif +enum ixgbe_fdir_pballoc_type { +IXGBE_FDIR_PBALLOC_64K =0 , +IXGBE_FDIR_PBALLOC_128K , +IXGBE_FDIR_PBALLOC_256K , +}; +#define IXGBE_FDIR_PBALLOC_SIZE_SHIFT 16 + +/* Flow Director register values */ +#define IXGBE_FDIRCTRL_PBALLOC_64K 0x00000001 +#define IXGBE_FDIRCTRL_PBALLOC_128K 0x00000002 +#define IXGBE_FDIRCTRL_PBALLOC_256K 0x00000003 +#define IXGBE_FDIRCTRL_INIT_DONE 0x00000008 +#define IXGBE_FDIRCTRL_PERFECT_MATCH 0x00000010 +#define IXGBE_FDIRCTRL_REPORT_STATUS 0x00000020 +#define IXGBE_FDIRCTRL_REPORT_STATUS_ALWAYS 0x00000080 +#define IXGBE_FDIRCTRL_DROP_Q_SHIFT 8 +#define IXGBE_FDIRCTRL_FLEX_SHIFT 16 +#define IXGBE_FDIRCTRL_SEARCHLIM 0x00800000 +#define IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT 24 +#define IXGBE_FDIRCTRL_FULL_THRESH_MASK 0xF0000000 +#define IXGBE_FDIRCTRL_FULL_THRESH_SHIFT 28 + +#define IXGBE_FDIRTCPM_DPORTM_SHIFT 16 +#define IXGBE_FDIRUDPM_DPORTM_SHIFT 16 +#define IXGBE_FDIRIP6M_DIPM_SHIFT 16 +#define IXGBE_FDIRM_VLANID 0x00000001 +#define IXGBE_FDIRM_VLANP 0x00000002 +#define IXGBE_FDIRM_POOL 0x00000004 +#define IXGBE_FDIRM_L3P 0x00000008 +#define IXGBE_FDIRM_L4P 0x00000010 +#define IXGBE_FDIRM_FLEX 0x00000020 +#define IXGBE_FDIRM_DIPv6 0x00000040 + +#define IXGBE_FDIRFREE_FREE_MASK 0xFFFF +#define IXGBE_FDIRFREE_FREE_SHIFT 0 +#define IXGBE_FDIRFREE_COLL_MASK 0x7FFF0000 +#define IXGBE_FDIRFREE_COLL_SHIFT 16 +#define IXGBE_FDIRLEN_MAXLEN_MASK 0x3F +#define IXGBE_FDIRLEN_MAXLEN_SHIFT 0 +#define IXGBE_FDIRLEN_MAXHASH_MASK 0x7FFF0000 +#define IXGBE_FDIRLEN_MAXHASH_SHIFT 16 +#define IXGBE_FDIRUSTAT_ADD_MASK 0xFFFF +#define IXGBE_FDIRUSTAT_ADD_SHIFT 0 +#define IXGBE_FDIRUSTAT_REMOVE_MASK 0xFFFF0000 +#define IXGBE_FDIRUSTAT_REMOVE_SHIFT 16 +#define IXGBE_FDIRFSTAT_FADD_MASK 0x00FF +#define IXGBE_FDIRFSTAT_FADD_SHIFT 0 +#define IXGBE_FDIRFSTAT_FREMOVE_MASK 0xFF00 +#define IXGBE_FDIRFSTAT_FREMOVE_SHIFT 8 +#define IXGBE_FDIRPORT_DESTINATION_SHIFT 16 +#define IXGBE_FDIRVLAN_FLEX_SHIFT 16 +#define IXGBE_FDIRHASH_BUCKET_VALID_SHIFT 15 +#define IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT 16 + +#define IXGBE_FDIRCMD_CMD_MASK 0x00000003 +#define IXGBE_FDIRCMD_CMD_ADD_FLOW 0x00000001 +#define IXGBE_FDIRCMD_CMD_REMOVE_FLOW 0x00000002 +#define IXGBE_FDIRCMD_CMD_QUERY_REM_FILT 0x00000003 +#define IXGBE_FDIRCMD_CMD_QUERY_REM_HASH 0x00000007 +#define IXGBE_FDIRCMD_FILTER_UPDATE 0x00000008 +#define IXGBE_FDIRCMD_IPv6DMATCH 0x00000010 +#define IXGBE_FDIRCMD_L4TYPE_UDP 0x00000020 +#define IXGBE_FDIRCMD_L4TYPE_TCP 0x00000040 +#define IXGBE_FDIRCMD_L4TYPE_SCTP 0x00000060 +#define IXGBE_FDIRCMD_IPV6 0x00000080 +#define IXGBE_FDIRCMD_CLEARHT 0x00000100 +#define IXGBE_FDIRCMD_DROP 0x00000200 +#define IXGBE_FDIRCMD_INT 0x00000400 +#define IXGBE_FDIRCMD_LAST 0x00000800 +#define IXGBE_FDIRCMD_COLLISION 0x00001000 +#define IXGBE_FDIRCMD_QUEUE_EN 0x00008000 +#define IXGBE_FDIRCMD_RX_QUEUE_SHIFT 16 +#define IXGBE_FDIRCMD_VT_POOL_SHIFT 24 +#define IXGBE_FDIR_INIT_DONE_POLL 10 +#define IXGBE_FDIRCMD_CMD_POLL 10 +/* Transmit Descriptor - Legacy */ struct ixgbe_legacy_tx_desc {u64 buffer_addr;/* Address of the descriptor's data buffer */
@@ -1957,6 +2064,45 @@ typedef u32 ixgbe_physical_layer;#define IXGBE_PHYSICAL_LAYER_10GBASE_KR 0x0800#define IXGBE_PHYSICAL_LAYER_10GBASE_XAUI 0x1000 +/* Software ATR hash keys */ +#define IXGBE_ATR_BUCKET_HASH_KEY 0xE214AD3D +#define IXGBE_ATR_SIGNATURE_HASH_KEY 0x14364D17 + +/* Software ATR input stream offsets and masks */ +#define IXGBE_ATR_VLAN_OFFSET 0 +#define IXGBE_ATR_SRC_IPV6_OFFSET 2 +#define IXGBE_ATR_SRC_IPV4_OFFSET 14 +#define IXGBE_ATR_DST_IPV6_OFFSET 18 +#define IXGBE_ATR_DST_IPV4_OFFSET 30 +#define IXGBE_ATR_SRC_PORT_OFFSET 34 +#define IXGBE_ATR_DST_PORT_OFFSET 36 +#define IXGBE_ATR_FLEX_BYTE_OFFSET 38 +#define IXGBE_ATR_VM_POOL_OFFSET 40 +#define IXGBE_ATR_L4TYPE_OFFSET 41 + +#define IXGBE_ATR_L4TYPE_MASK 0x3 +#define IXGBE_ATR_L4TYPE_IPV6_MASK 0x4 +#define IXGBE_ATR_L4TYPE_UDP 0x1 +#define IXGBE_ATR_L4TYPE_TCP 0x2 +#define IXGBE_ATR_L4TYPE_SCTP 0x3 +#define IXGBE_ATR_HASH_MASK 0x7fff + +/* Flow Director ATR input struct. */ +struct ixgbe_atr_input { +/* Byte layout in order, all values with MSB first: +* +* vlan_id - 2 bytes +* src_ip - 16 bytes +* dst_ip - 16 bytes +* src_port - 2 bytes +* dst_port - 2 bytes +* flex_bytes - 2 bytes +* vm_pool - 1 byte +* l4type - 1 byte +*/ +u8 byte_stream[42 ]; +}; +enum ixgbe_eeprom_type { ixgbe_eeprom_uninitialized =0 , ixgbe_eeprom_spi,
@@ -2348,6 +2494,7 @@ struct ixgbe_info {#define IXGBE_ERR_SFP_NOT_SUPPORTED -19#define IXGBE_ERR_SFP_NOT_PRESENT -20#define IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT -21 +#define IXGBE_ERR_FDIR_REINIT_FAILED -23#define IXGBE_NOT_IMPLEMENTED 0x7FFFFFFF#endif /* _IXGBE_TYPE_H_ */
PATCH 6/10 ixgbe: Add Flow Director init and modify functions for 82599
In reply to Jeff KirsherFrom: Peter P Waskiewicz Jr <[email protected]>
This patch adds the functions for ixgbe to initialize Flow Director. It also has the function APIs to add Flow Director filters from the base driver. This also includes ATR, Application Targeted Routing, which is a feature set of Flow Director. This is the hash-based mechanism to automatically identify flows and add filters based on the hash, and direct the Rx of that flow back to that same CPU.
---
drivers/net/ixgbe/ixgbe.h | 55 ++ drivers/net/ixgbe/ixgbe_82599.c | 925 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 980 insertions(+), 0 deletions(-)
drivers/net/ixgbe/ixgbe.h +55 -0
@@ -402,6 +402,61 @@ extern int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter);extern void ixgbe_clear_interrupt_scheme (struct ixgbe_adapter *adapter);extern void ixgbe_write_eitr (struct ixgbe_q_vector *);extern int ethtool_ioctl (struct ifreq *ifr); +extern s32 ixgbe_reinit_fdir_tables_82599 (struct ixgbe_hw *hw); +extern s32 ixgbe_init_fdir_signature_82599 (struct ixgbe_hw *hw,u32 pballoc); +extern s32 ixgbe_init_fdir_perfect_82599 (struct ixgbe_hw *hw,u32 pballoc); +extern s32 ixgbe_fdir_add_signature_filter_82599 (struct ixgbe_hw *hw, +struct ixgbe_atr_input *input, +u8 queue); +extern s32 ixgbe_fdir_add_perfect_filter_82599 (struct ixgbe_hw *hw, +struct ixgbe_atr_input *input, +u16 soft_id, +u8 queue); +extern u16 ixgbe_atr_compute_hash_82599 (struct ixgbe_atr_input *input,u32 key); +extern s32 ixgbe_atr_set_vlan_id_82599 (struct ixgbe_atr_input *input, +u16 vlan_id); +extern s32 ixgbe_atr_set_src_ipv4_82599 (struct ixgbe_atr_input *input, +u32 src_addr); +extern s32 ixgbe_atr_set_dst_ipv4_82599 (struct ixgbe_atr_input *input, +u32 dst_addr); +extern s32 ixgbe_atr_set_src_ipv6_82599 (struct ixgbe_atr_input *input, +u32 src_addr_1,u32 src_addr_2, +u32 src_addr_3,u32 src_addr_4); +extern s32 ixgbe_atr_set_dst_ipv6_82599 (struct ixgbe_atr_input *input, +u32 dst_addr_1,u32 dst_addr_2, +u32 dst_addr_3,u32 dst_addr_4); +extern s32 ixgbe_atr_set_src_port_82599 (struct ixgbe_atr_input *input, +u16 src_port); +extern s32 ixgbe_atr_set_dst_port_82599 (struct ixgbe_atr_input *input, +u16 dst_port); +extern s32 ixgbe_atr_set_flex_byte_82599 (struct ixgbe_atr_input *input, +u16 flex_byte); +extern s32 ixgbe_atr_set_vm_pool_82599 (struct ixgbe_atr_input *input, +u8 vm_pool); +extern s32 ixgbe_atr_set_l4type_82599 (struct ixgbe_atr_input *input, +u8 l4type); +extern s32 ixgbe_atr_get_vlan_id_82599 (struct ixgbe_atr_input *input, +u16 *vlan_id); +extern s32 ixgbe_atr_get_src_ipv4_82599 (struct ixgbe_atr_input *input, +u32 *src_addr); +extern s32 ixgbe_atr_get_dst_ipv4_82599 (struct ixgbe_atr_input *input, +u32 *dst_addr); +extern s32 ixgbe_atr_get_src_ipv6_82599 (struct ixgbe_atr_input *input, +u32 *src_addr_1,u32 *src_addr_2, +u32 *src_addr_3,u32 *src_addr_4); +extern s32 ixgbe_atr_get_dst_ipv6_82599 (struct ixgbe_atr_input *input, +u32 *dst_addr_1,u32 *dst_addr_2, +u32 *dst_addr_3,u32 *dst_addr_4); +extern s32 ixgbe_atr_get_src_port_82599 (struct ixgbe_atr_input *input, +u16 *src_port); +extern s32 ixgbe_atr_get_dst_port_82599 (struct ixgbe_atr_input *input, +u16 *dst_port); +extern s32 ixgbe_atr_get_flex_byte_82599 (struct ixgbe_atr_input *input, +u16 *flex_byte); +extern s32 ixgbe_atr_get_vm_pool_82599 (struct ixgbe_atr_input *input, +u8 *vm_pool); +extern s32 ixgbe_atr_get_l4type_82599 (struct ixgbe_atr_input *input, +u8 *l4type);#ifdef IXGBE_FCOE extern void ixgbe_configure_fcoe (struct ixgbe_adapter *adapter); extern int ixgbe_fso(struct ixgbe_adapter *adapter,
drivers/net/ixgbe/ixgbe_82599.c +925 -0
931 lines not on this page · raw message
PATCH 7/10 ixgbe: Enable Flow Director hashing in 82599
In reply to Jeff KirsherFrom: Peter P Waskiewicz Jr <[email protected]>
This patch enables Flow Director's ATR functionality to the main base driver for 82599.
---
drivers/net/ixgbe/ixgbe.h | 12 ++ drivers/net/ixgbe/ixgbe_ethtool.c | 2 drivers/net/ixgbe/ixgbe_main.c | 215 +++++++++++++++++++++++++++++++++++++ 3 files changed, 228 insertions(+), 1 deletions(-)
drivers/net/ixgbe/ixgbe.h +12 -0
@@ -126,6 +126,8 @@ struct ixgbe_ring {unsigned int count;/* amount of descriptors */ unsigned int next_to_use;unsigned int next_to_clean; +u8 atr_sample_rate; +u8 atr_count;int queue_index;/* needed for multiqueue queue management */ union {
@@ -148,6 +150,7 @@ struct ixgbe_ring {int cpu;#endif struct ixgbe_queue_stats stats; +unsigned long reinit_state;u16 work_limit;/* max work per interrupt */ u16 rx_buf_len;
@@ -159,6 +162,7 @@ enum ixgbe_ring_f_enum {RING_F_DCB ,RING_F_VMDQ ,RING_F_RSS , +RING_F_FDIR , #ifdef IXGBE_FCOE RING_F_FCOE, #endif /* IXGBE_FCOE */
@@ -169,6 +173,7 @@ enum ixgbe_ring_f_enum {#define IXGBE_MAX_DCB_INDICES 8#define IXGBE_MAX_RSS_INDICES 16#define IXGBE_MAX_VMDQ_INDICES 16 +#define IXGBE_MAX_FDIR_INDICES 64#ifdef IXGBE_FCOE #define IXGBE_MAX_FCOE_INDICES 8#endif /* IXGBE_FCOE */
@@ -317,6 +322,8 @@ struct ixgbe_adapter {#define IXGBE_FLAG_IN_WATCHDOG_TASK (u32)(1 << 23)#define IXGBE_FLAG_IN_SFP_LINK_TASK (u32)(1 << 24)#define IXGBE_FLAG_IN_SFP_MOD_TASK (u32)(1 << 25) +#define IXGBE_FLAG_FDIR_HASH_CAPABLE (u32)(1 << 26) +#define IXGBE_FLAG_FDIR_PERFECT_CAPABLE (u32)(1 << 27)#define IXGBE_FLAG_FCOE_ENABLED (u32)(1 << 29)u32 flags2;
@@ -356,6 +363,10 @@ struct ixgbe_adapter {struct timer_list sfp_timer;struct work_struct multispeed_fiber_task;struct work_struct sfp_config_module_task; +u32 fdir_pballoc; +u32 atr_sample_rate; +spinlock_t fdir_perfect_lock; +struct work_struct fdir_reinit_task;#ifdef IXGBE_FCOE struct ixgbe_fcoe fcoe;#endif /* IXGBE_FCOE */
@@ -368,6 +379,7 @@ enum ixbge_state_t { __IXGBE_TESTING, __IXGBE_RESETTING, __IXGBE_DOWN, + __IXGBE_FDIR_INIT_DONE, __IXGBE_SFP_MODULE_NOT_FOUND };
drivers/net/ixgbe/ixgbe_ethtool.c +2 -0
@@ -68,6 +68,8 @@ static struct ixgbe_stats ixgbe_gstrings_stats[] = { {"rx_crc_errors", IXGBE_STAT(net_stats.rx_crc_errors)}, {"rx_frame_errors", IXGBE_STAT(net_stats.rx_frame_errors)}, {"hw_rsc_count", IXGBE_STAT(rsc_count)}, + {"fdir_match", IXGBE_STAT(stats.fdirmatch)}, + {"fdir_miss", IXGBE_STAT(stats.fdirmiss)}, {"rx_fifo_errors", IXGBE_STAT(net_stats.rx_fifo_errors)}, {"rx_missed_errors", IXGBE_STAT(net_stats.rx_missed_errors)}, {"tx_aborted_errors", IXGBE_STAT(net_stats.tx_aborted_errors)},
drivers/net/ixgbe/ixgbe_main.c +214 -1
336 lines not on this page · raw message
PATCH 8/10 ixgbe: Re-adjust ring layouts to have better cacheline efficiency
In reply to Jeff KirsherFrom: Jesse Brandeburg <[email protected]>
This patch rearranges the ixgbe_ring struct to make better use of cacheline efficiency.
---
drivers/net/ixgbe/ixgbe.h | 35 +++++++++++++++++++---------------- 1 files changed, 19 insertions(+), 16 deletions(-)
drivers/net/ixgbe/ixgbe.h +19 -16
@@ -121,19 +121,18 @@ struct ixgbe_queue_stats {struct ixgbe_ring {void *desc;/* descriptor ring memory */ -dma_addr_t dma;/* phys. address of descriptor ring */ -unsigned int size;/* length in bytes */ -unsigned int count;/* amount of descriptors */ -unsigned int next_to_use; -unsigned int next_to_clean; -u8 atr_sample_rate; -u8 atr_count; - -int queue_index;/* needed for multiqueue queue management */ union {struct ixgbe_tx_buffer *tx_buffer_info;struct ixgbe_rx_buffer *rx_buffer_info; }; +u8 atr_sample_rate; +u8 atr_count; +u16 count;/* amount of descriptors */ +u16 rx_buf_len; +u16 next_to_use; +u16 next_to_clean; + +u8 queue_index;/* needed for multiqueue queue management */ u16 head;u16 tail;
@@ -141,20 +140,24 @@ struct ixgbe_ring {unsigned int total_bytes;unsigned int total_packets; -u16 reg_idx;/* holds the special value that gets the hardware register -* offset associated with this ring, which is different -* for DCB and RSS modes */ -#ifdef CONFIG_IXGBE_DCA /* cpu for tx queue */ int cpu;#endif + +u16 work_limit;/* max work per interrupt */ +u16 reg_idx;/* holds the special value that gets +* the hardware register offset +* associated with this ring, which is +* different for DCB and RSS modes +*/ +struct ixgbe_queue_stats stats;unsigned long reinit_state; +u64 rsc_count;/* stat for coalesced packets */ -u16 work_limit;/* max work per interrupt */ -u16 rx_buf_len; -u64 rsc_count;/* stat for coalesced packets */ +unsigned int size;/* length in bytes */ +dma_addr_t dma;/* phys. address of descriptor ring */ };enum ixgbe_ring_f_enum {
PATCH 9/10 ixgbe: Add FW detection and warning for 82599 SFP+ adapters
In reply to Jeff KirsherFrom: Peter P Waskiewicz Jr <[email protected]>
82599 has a FW running that helps manage the internal SFI PHY. There are also a number of pre-production samples of these SFI-based devices in the field. This patch adds a check to look for the firmware running on all SFP+ based adapters, and displays a warning to the system log if a pre-production adapter is identified. The driver will continue loading though, with no functional degradation.
Also remove an old function prototype from ixgbe_82599.c that isn't being used.
---
drivers/net/ixgbe/ixgbe_82599.c | 58 ++++++++++++++++++++++++++++++++++++-- drivers/net/ixgbe/ixgbe_common.c | 12 +++++--- drivers/net/ixgbe/ixgbe_main.c | 20 ++++++++++++- drivers/net/ixgbe/ixgbe_type.h | 3 ++ 4 files changed, 85 insertions(+), 8 deletions(-)
drivers/net/ixgbe/ixgbe_82599.c +55 -3
@@ -71,10 +71,10 @@ s32 ixgbe_clear_vfta_82599(struct ixgbe_hw *hw);s32 ixgbe_init_uta_tables_82599 (struct ixgbe_hw *hw);s32 ixgbe_read_analog_reg8_82599 (struct ixgbe_hw *hw,u32 reg,u8 *val);s32 ixgbe_write_analog_reg8_82599 (struct ixgbe_hw *hw,u32 reg,u8 val); -s32 ixgbe_start_hw_rev_0_82599 (struct ixgbe_hw *hw);s32 ixgbe_identify_phy_82599 (struct ixgbe_hw *hw);s32 ixgbe_start_hw_82599 (struct ixgbe_hw *hw);u32 ixgbe_get_supported_physical_layer_82599 (struct ixgbe_hw *hw); +static s32 ixgbe_verify_fw_version_82599 (struct ixgbe_hw *hw);void ixgbe_init_mac_link_ops_82599 (struct ixgbe_hw *hw) {
@@ -2142,8 +2142,9 @@ s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val)s32 ixgbe_start_hw_82599 (struct ixgbe_hw *hw) {u32 q_num; +s32 ret_val; -ixgbe_start_hw_generic (hw); + ret_val =ixgbe_start_hw_generic (hw);/* Clear the rate limiters */ for (q_num =0 ; q_num < hw->mac.max_tx_queues; q_num++) {
@@ -2155,7 +2156,10 @@ s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw)/* We need to run link autotry after the driver loads */ hw->mac.autotry_restart = true; -return 0 ; +if (ret_val ==0 ) + ret_val =ixgbe_verify_fw_version_82599 (hw); + +return ret_val; }/**
@@ -2407,6 +2411,54 @@ san_mac_addr_out:return 0 ; } +/** +* ixgbe_verify_fw_version_82599 - verify fw version for 82599 +* @hw: pointer to hardware structure +* +* Verifies that installed the firmware version is 0.6 or higher +* for SFI devices. All 82599 SFI devices should have version 0.6 or higher. +* +* Returns IXGBE_ERR_EEPROM_VERSION if the FW is not present or +* if the FW version is not supported. +**/ +static s32 ixgbe_verify_fw_version_82599 (struct ixgbe_hw *hw) +{ +s32 status =IXGBE_ERR_EEPROM_VERSION ; +u16 fw_offset, fw_ptp_cfg_offset; +u16 fw_version =0 ; + +/* firmware check is only necessary for SFI devices */ +if (hw->phy.media_type != ixgbe_media_type_fiber) { + status =0 ; + goto fw_version_out; + } + +/* get the offset to the Firmware Module block */ + hw->eeprom.ops.read (hw,IXGBE_FW_PTR , &fw_offset); + +if ((fw_offset ==0 ) || (fw_offset ==0xFFFF )) + goto fw_version_out; + +/* get the offset to the Pass Through Patch Configuration block */ + hw->eeprom.ops.read (hw, (fw_offset + +IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR ), + &fw_ptp_cfg_offset); + +if ((fw_ptp_cfg_offset ==0 ) || (fw_ptp_cfg_offset ==0xFFFF )) + goto fw_version_out; + +/* get the firmware version */ + hw->eeprom.ops.read (hw, (fw_ptp_cfg_offset + +IXGBE_FW_PATCH_VERSION_4 ), + &fw_version); + +if (fw_version >0x5 ) + status =0 ; + +fw_version_out: +return status; +} +static struct ixgbe_mac_operations mac_ops_82599 = { .init_hw = &ixgbe_init_hw_generic, .reset_hw = &ixgbe_reset_hw_82599,
drivers/net/ixgbe/ixgbe_common.c +8 -4
@@ -106,13 +106,17 @@ s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw)**/ s32 ixgbe_init_hw_generic (struct ixgbe_hw *hw) { +s32 status; +/* Reset the hardware */ - hw->mac.ops.reset_hw (hw); + status = hw->mac.ops.reset_hw (hw); -/* Start the HW */ - hw->mac.ops.start_hw (hw); +if (status ==0 ) { +/* Start the HW */ + status = hw->mac.ops.start_hw (hw); + } -return 0 ; +return status; }/**
drivers/net/ixgbe/ixgbe_main.c +19 -1
@@ -2728,6 +2728,15 @@ void ixgbe_reset(struct ixgbe_adapter *adapter)case IXGBE_ERR_MASTER_REQUESTS_PENDING :dev_err (&adapter->pdev->dev,"master disable timed out\n" );break ; +case IXGBE_ERR_EEPROM_VERSION : +/* We are running on a pre-production device, log a warning */ +dev_warn (&adapter->pdev->dev,"This device is a pre-production " +"adapter/LOM. Please be aware there may be issues " +"associated with your hardware. If you are " +"experiencing problems please contact your Intel or " +"hardware representative who provided you with this " +"hardware.\n" ); +break ;default :dev_err (&adapter->pdev->dev,"Hardware Error: %d\n" , err); }
@@ -5608,8 +5617,17 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, hw->eeprom.ops.read (hw,0x29 , &adapter->eeprom_version);/* reset the hardware with the new settings */ - hw->mac.ops.start_hw (hw); + err = hw->mac.ops.start_hw (hw); +if (err ==IXGBE_ERR_EEPROM_VERSION ) { +/* We are running on a pre-production device, log a warning */ +dev_warn (&pdev->dev,"This device is a pre-production " +"adapter/LOM. Please be aware there may be issues " +"associated with your hardware. If you are " +"experiencing problems please contact your Intel or " +"hardware representative who provided you with this " +"hardware.\n" ); + }strcpy (netdev->name,"eth%d" ); err =register_netdev (netdev);if (err)
drivers/net/ixgbe/ixgbe_type.h +3 -0
@@ -1516,6 +1516,8 @@#define IXGBE_SAN_MAC_ADDR_PORT1_OFFSET 0x3#define IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP 0x1#define IXGBE_DEVICE_CAPS_FCOE_OFFLOADS 0x2 +#define IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR 0x4 +#define IXGBE_FW_PATCH_VERSION_4 0x7/* PCI Bus Info */ #define IXGBE_PCI_LINK_STATUS 0xB2
@@ -2495,6 +2497,7 @@ struct ixgbe_info {#define IXGBE_ERR_SFP_NOT_PRESENT -20#define IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT -21#define IXGBE_ERR_FDIR_REINIT_FAILED -23 +#define IXGBE_ERR_EEPROM_VERSION -24#define IXGBE_NOT_IMPLEMENTED 0x7FFFFFFF#endif /* _IXGBE_TYPE_H_ */
PATCH 10/10 ixgbe: Increase the driver version number
In reply to Jeff KirsherFrom: Peter P Waskiewicz Jr <[email protected]>
With all the last patchsets going in for 82599 feature enablement, the driver version needs to be increased for better identification.
---
drivers/net/ixgbe/ixgbe_main.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/net/ixgbe/ixgbe_main.c +1 -1
@@ -48,7 +48,7 @@ char ixgbe_driver_name[] = "ixgbe";static const char ixgbe_driver_string[] ="Intel(R) 10 Gigabit PCI Express Network Driver" ; -#define DRV_VERSION "2.0.24-k2" +#define DRV_VERSION "2.0.34-k2"const char ixgbe_driver_version[] =DRV_VERSION ;static char ixgbe_copyright[] ="Copyright (c) 1999-2009 Intel Corporation." ;
David Miller
maintainerAll 10 patches applied, thanks!
The flow steering looks very exciting.