Skip to contentSkip to conversation

3com 3crxjk10075 with ath5k driver

DISCUSSION William Thompson 2 participants 10 messages Jun 9, 2009 – Jun 11, 2009

lore
Share & tools
lore
#0 lore raw

This card has the "xjack" antennae which is supposed to disable the radio (I thought it was in hardware, but it's not) when it is not extended. The madwifi driver (Last time I actually used this card with it) did disable the radio (Or refused packets, not sure which).

The kernel ath5k driver (last tested 2.6.29.4) will work regardless if the antannae is in or out.

#1 lore raw

[CCed ath5k-devel]

Quoted 4 lines · William Thompson

This card has the "xjack" antennae which is supposed to disable the radio (I thought it was in hardware, but it's not) when it is not extended.  The madwifi driver (Last time I actually used this card with it) did disable the radio (Or refused packets, not sure which).

Huh, I wonder how that works. Is disabling the radio an advertised feature? i.e. as opposed to just not working because the antenna is in?

Quoted 2 lines

The kernel ath5k driver (last tested 2.6.29.4) will work regardless if the antannae is in or out.

I suppose it could be asserting something on rfkill gpios; ath5k hasn't had real rfkill support yet. Anyone else know about these devices?

Signature · 1 line
Bob Copeland %% www.bobcopeland.com
#2 lore raw
Quoted 11 lines · Bob Copeland

[CCed ath5k-devel]

Quoted 4 lines · William Thompson

This card has the "xjack" antennae which is supposed to disable the radio (I thought it was in hardware, but it's not) when it is not extended. ?The madwifi driver (Last time I actually used this card with it) did disable the radio (Or refused packets, not sure which).

Huh, I wonder how that works. Is disabling the radio an advertised feature? i.e. as opposed to just not working because the antenna is in?

I'm not sure if it was advertised that way, but according to 3com's site:
3Com-patented XJACK antenna design extends for use and retracts for safe transport and to conserve power; no need to remove the PC Card from the notebook while traveling

Sounds like it was intended that way.

Quoted 5 lines
Quoted 2 lines

The kernel ath5k driver (last tested 2.6.29.4) will work regardless if the antannae is in or out.

I suppose it could be asserting something on rfkill gpios; ath5k hasn't had real rfkill support yet. Anyone else know about these devices?

It's possible. The LED on it goes off when it's pushed in. Which reminds me, I don't think the ath5k driver allows the LED to blink when it's transmitting/receiving, it just stays on.

#3 lore raw
Quoted 6 lines · William Thompson
Quoted 2 lines

I suppose it could be asserting something on rfkill gpios; ath5k hasn't had real rfkill support yet. Anyone else know about these devices?

It's possible. The LED on it goes off when it's pushed in. Which reminds me, I don't think the ath5k driver allows the LED to blink when it's transmitting/receiving, it just stays on.

Can you try latest wireless-testing? There's an rfkill patch for ath5k in it. URL is:

git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git

As for LEDs, there's a patch in kernel bugzilla. I don't have a link handy but you can check the ath5k-devel archives from a week or two ago, let me know if you can't find it.

Signature · 1 line
Bob Copeland %% www.bobcopeland.com
#4 lore raw
Quoted 4 lines · Bob Copeland
Quoted 3 lines · William Thompson
Quoted 2 lines

I suppose it could be asserting something on rfkill gpios; ath5k hasn't had real rfkill support yet. Anyone else know about these devices?

Quoted 8 lines
Quoted 3 lines

It's possible. The LED on it goes off when it's pushed in. Which reminds me, I don't think the ath5k driver allows the LED to blink when it's transmitting/receiving, it just stays on.

Can you try latest wireless-testing? There's an rfkill patch for ath5k in it. URL is:

git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git

Unfortunately, I don't know how to use git.

Quoted 3 lines

As for LEDs, there's a patch in kernel bugzilla. I don't have a link handy but you can check the ath5k-devel archives from a week or two ago, let me know if you can't find it.

I'll see.

#5 lore raw
Quoted 3 lines · William Thompson
Quoted 1 line

git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git

Unfortunately, I don't know how to use git.

Quite easy for this purpose:

$ git clone git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git

The patch can also be found in the mailing list archives, but it won't apply to 2.6.30.

Signature · 1 line
Bob Copeland %% www.bobcopeland.com
#6 lore raw
Quoted 11 lines · Bob Copeland
Quoted 3 lines · William Thompson
Quoted 1 line

git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git

Unfortunately, I don't know how to use git.

Quite easy for this purpose:

$ git clone git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git

The patch can also be found in the mailing list archives, but it won't apply to 2.6.30.

That's huge! Isn't there an easier way to do it?

#7 lore raw
Quoted 5 lines · William Thompson
Quoted 2 lines · Bob Copeland
$ git clone git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git

That's huge!  Isn't there an easier way to do it?

Unfortunately, it depends on surrounding rfkill framework that hit the tree after 2.6.30. Now that compat-wireless builds, you can try it, but since it is a backport, YMMV.

Signature · 1 line
Bob Copeland %% www.bobcopeland.com
#8 lore raw
Quoted 11 lines · Bob Copeland
Quoted 5 lines · William Thompson
Quoted 2 lines · Bob Copeland
$ git clone git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git

That's huge! ?Isn't there an easier way to do it?

Unfortunately, it depends on surrounding rfkill framework that hit the tree after 2.6.30. Now that compat-wireless builds, you can try it, but since it is a backport, YMMV.

Isn't there an easy way to obtain the patch? THe clone has completed but I don't have a clue what to do.

#9 lore raw
Quoted 3 lines · William Thompson

Isn't there an easy way to obtain the patch?  THe clone has completed but I don't have a clue what to do.

Just build the kernel from the resulting tree, it already has the changes included.

As I said, the patch won't do any good because it needs the new rfkill infrastructure. That is why I also suggested compat-wireless which is just the wireless code that you can build like out-of-tree modules, but it contains all the infrastructure (http://linuxwireless.org/download/compat-wireless-2.6/).

Signature · 1 line
Bob Copeland %% www.bobcopeland.com