Which directory should OMAP-L137/L138's code in ?

DISCUSSION stanley.miao 4 participants 5 messages Jun 12, 2009

Share & tools

stanley.miao

author

2009-06-12 09:52 UTC #0 lore raw

I am developing on the board OMAP-L137/L138, which is similar with Davinci series board. Should I put its platform file in the directory arch/arm/mach-davinci ? or create a new direcory arch/arch/mach-L1xx for it ?

Any suggestions ?

Thanks
Stanley.

Tony Lindgren

2009-06-12 10:32 UTC #1 lore raw

Quoted 6 lines · stanley.miao

I am developing on the board OMAP-L137/L138, which is similar with Davinci series board. Should I put its platform file in the directory arch/arm/mach-davinci ? or create a new direcory arch/arch/mach-L1xx for it ?
Any suggestions ?

If it uses DaVinci core code to me it sounds like it should be under mach-davinci. Kevin?

Tony

Syed Mohammed, Khasim

2009-06-12 10:46 UTC #2 lore raw

Hi,

Quoted 14 lines

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Tony Lindgren
Sent: Friday, June 12, 2009 4:02 PM
To: stanley.miao; Kevin Hilman
Cc: [email protected]
Subject: Re: Which directory should OMAP-L137/L138's code in ?
Quoted 5 lines · stanley.miao
I am developing on the board OMAP-L137/L138, which is similar with Davinci series board. Should I put its platform file in the directory arch/arm/mach-davinci ? or create a new direcory arch/arch/mach-L1xx for it ?

Quoted 5 lines

Quoted 1 line
Any suggestions ?
If it uses DaVinci core code to me it sounds like it should be under mach-davinci. Kevin?

The TI code for OMAP L 13x is part of mach-davinci. And the platform specific patches to be submitted to Davinci mailing list for upstream submissions.

Regards,
Khasim

stanley.miao

author

2009-06-12 12:05 UTC #3 lore raw

Thanks a lot.

Stanley.

Quoted 31 lines · Khasim

Hi,
Quoted 15 lines
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Tony Lindgren
Sent: Friday, June 12, 2009 4:02 PM
To: stanley.miao; Kevin Hilman
Cc: [email protected]
Subject: Re: Which directory should OMAP-L137/L138's code in ?
Quoted 5 lines · stanley.miao
I am developing on the board OMAP-L137/L138, which is similar with Davinci series board. Should I put its platform file in the directory arch/arm/mach-davinci ? or create a new direcory arch/arch/mach-L1xx for it ?
Quoted 6 lines
Quoted 2 lines
Any suggestions ?
If it uses DaVinci core code to me it sounds like it should be under mach-davinci. Kevin?
The TI code for OMAP L 13x is part of mach-davinci. And the platform specific patches to be submitted to Davinci mailing list for upstream submissions.
Regards,
Khasim

Kevin Hilman

2009-06-12 14:23 UTC #4 lore raw

And yesterday, I commited the core arch support for the da830/omap-L137 SoC to DaVinci git.

http://git.kernel.org/?p=linux/kernel/git/khilman/linux-davinci.git

This part is OMAP in name and marketing spin only. This is very much in the davinci family of SoCs, so I expect more confusion on this in the future.

Kevin

Quoted 36 lines · stanley.miao

Thanks a lot.
Stanley.
Quoted 31 lines · Khasim
Hi,
Quoted 15 lines
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Tony Lindgren
Sent: Friday, June 12, 2009 4:02 PM
To: stanley.miao; Kevin Hilman
Cc: [email protected]
Subject: Re: Which directory should OMAP-L137/L138's code in ?
Quoted 5 lines · stanley.miao
I am developing on the board OMAP-L137/L138, which is similar with Davinci series board. Should I put its platform file in the directory arch/arm/mach-davinci ? or create a new direcory arch/arch/mach-L1xx for it ?
Quoted 6 lines
Quoted 2 lines
Any suggestions ?
If it uses DaVinci core code to me it sounds like it should be under mach-davinci. Kevin?
The TI code for OMAP L 13x is part of mach-davinci. And the platform specific patches to be submitted to Davinci mailing list for upstream submissions.
Regards,
Khasim