Skip to contentSkip to conversation

Pull request - net

U-Boot Ben Warren 2 participants 2 messages Jun 15, 2009

lore
Share & tools
lore

Ben Warren

author
#0 lore raw

Wolfgang,

The following changes since commit 31f30c9eb60d9ab0bd702e31f66345f99b34bdc6:
Mike Frysinger (1):

        add %.c->%.i and %.c->%.s rules

are available in the git repository at:

git://git.denx.de/u-boot-net master

Ben Warren (4):
Moved Davinci Ethernet driver to drivers/net Initial cleanup of Davinci Ethernet driver Switched davinci_emac Ethernet driver to use newer API Remove support for non-CONFIG_NET_MULTI on PPC4xx EMAC

Norbert van Bolhuis (1):
A VLAN tagged DHCP request/discover is 4 bytes short

Prafulla Wadaskar (2):
Marvell MV88E61XX Switch Driver support
net: Add Marvell Kirkwood gigabit ethernet driver

Remy Bohmer (1):
Convert DM9000 driver for CONFIG_NET_MULTI

Richard Retanubun (1):
Subject: [PATCH] [repost] Standardize the use of MCFFEC_TOUT_LOOP as a udelay(1) loop counter.

Zach LeRoy (1):
tsec: Add support for BCM5482S PHY

s-paulraj at ti.com (1):
DaVinci Network Driver Updates

 board/atmel/at91sam9261ek/at91sam9261ek.c          |    7 +
 board/davinci/common/misc.h                        |    1 -
 board/davinci/dvevm/dvevm.c                        |    3 -
 board/davinci/schmoogie/schmoogie.c                |    3 -
 board/davinci/sffsdr/sffsdr.c                      |    3 -
 board/davinci/sonata/sonata.c                      |    3 -
 board/freescale/m5253demo/m5253demo.c              |    9 +
 board/scb9328/scb9328.c                            |    8 +
 board/trizepsiv/conxs.c                            |    8 +
 cpu/arm926ejs/davinci/Makefile                     |    2 +-
 cpu/arm926ejs/davinci/cpu.c                        |   12 +
 drivers/net/4xx_enet.c                             |   54 --
 drivers/net/Makefile                               |    2 +
 .../davinci/ether.c => drivers/net/davinci_emac.c  |  214 +++----
 drivers/net/dm9000x.c                              |   44 +-
 drivers/net/kirkwood_egiga.c                       |  664 ++++++++++++++++++++
 drivers/net/kirkwood_egiga.h                       |  503 +++++++++++++++
 drivers/net/mcfmii.c                               |    2 +-
 drivers/net/phy/Makefile                           |    1 +
 drivers/net/phy/mv88e61xx.c                        |  413 ++++++++++++
 drivers/net/phy/mv88e61xx.h                        |   62 ++
 drivers/net/tsec.c                                 |   41 ++
 include/asm-arm/arch-davinci/emac_defs.h           |   32 +-
 include/configs/M5253DEMO.h                        |    1 +
 include/configs/at91sam9261ek.h                    |    1 +
 include/configs/davinci_dvevm.h                    |    1 +
 include/configs/davinci_schmoogie.h                |    1 +
 include/configs/davinci_sffsdr.h                   |    1 +
 include/configs/davinci_sonata.h                   |    1 +
 include/configs/scb9328.h                          |    1 +
 include/configs/trizepsiv.h                        |    1 +
 include/netdev.h                                   |   50 ++
 include/tsec.h                                     |    2 +
 net/bootp.c                                        |    4 +-
 net/eth.c                                          |    8 -
 35 files changed, 1944 insertions(+), 219 deletions(-)
 rename cpu/arm926ejs/davinci/ether.c => drivers/net/davinci_emac.c (93%)
 create mode 100644 drivers/net/kirkwood_egiga.c
 create mode 100644 drivers/net/kirkwood_egiga.h
 create mode 100644 drivers/net/phy/mv88e61xx.c
 create mode 100644 drivers/net/phy/mv88e61xx.h
#1 lore raw

Dear Ben Warren,

Quoted 68 lines · In message <[email protected]> you wrote:

Wolfgang,

The following changes since commit 31f30c9eb60d9ab0bd702e31f66345f99b34bdc6:
Mike Frysinger (1):

        add %.c->%.i and %.c->%.s rules

are available in the git repository at:

git://git.denx.de/u-boot-net master

Ben Warren (4):
Moved Davinci Ethernet driver to drivers/net Initial cleanup of Davinci Ethernet driver Switched davinci_emac Ethernet driver to use newer API Remove support for non-CONFIG_NET_MULTI on PPC4xx EMAC

Norbert van Bolhuis (1):
A VLAN tagged DHCP request/discover is 4 bytes short

Prafulla Wadaskar (2):
Marvell MV88E61XX Switch Driver support
net: Add Marvell Kirkwood gigabit ethernet driver

Remy Bohmer (1):
Convert DM9000 driver for CONFIG_NET_MULTI

Richard Retanubun (1):
Subject: [PATCH] [repost] Standardize the use of MCFFEC_TOUT_LOOP as a udelay(1) loop counter.

Zach LeRoy (1):
tsec: Add support for BCM5482S PHY

s-paulraj at ti.com (1):
DaVinci Network Driver Updates

 board/atmel/at91sam9261ek/at91sam9261ek.c          |    7 +
 board/davinci/common/misc.h                        |    1 -
 board/davinci/dvevm/dvevm.c                        |    3 -
 board/davinci/schmoogie/schmoogie.c                |    3 -
 board/davinci/sffsdr/sffsdr.c                      |    3 -
 board/davinci/sonata/sonata.c                      |    3 -
 board/freescale/m5253demo/m5253demo.c              |    9 +
 board/scb9328/scb9328.c                            |    8 +
 board/trizepsiv/conxs.c                            |    8 +
 cpu/arm926ejs/davinci/Makefile                     |    2 +-
 cpu/arm926ejs/davinci/cpu.c                        |   12 +
 drivers/net/4xx_enet.c                             |   54 --
 drivers/net/Makefile                               |    2 +
 .../davinci/ether.c => drivers/net/davinci_emac.c  |  214 +++----
 drivers/net/dm9000x.c                              |   44 +-
 drivers/net/kirkwood_egiga.c                       |  664 ++++++++++++++++++++
 drivers/net/kirkwood_egiga.h                       |  503 +++++++++++++++
 drivers/net/mcfmii.c                               |    2 +-
 drivers/net/phy/Makefile                           |    1 +
 drivers/net/phy/mv88e61xx.c                        |  413 ++++++++++++
 drivers/net/phy/mv88e61xx.h                        |   62 ++
 drivers/net/tsec.c                                 |   41 ++
 include/asm-arm/arch-davinci/emac_defs.h           |   32 +-
 include/configs/M5253DEMO.h                        |    1 +
 include/configs/at91sam9261ek.h                    |    1 +
 include/configs/davinci_dvevm.h                    |    1 +
 include/configs/davinci_schmoogie.h                |    1 +
 include/configs/davinci_sffsdr.h                   |    1 +
 include/configs/davinci_sonata.h                   |    1 +
 include/configs/scb9328.h                          |    1 +
 include/configs/trizepsiv.h                        |    1 +
 include/netdev.h                                   |   50 ++
 include/tsec.h                                     |    2 +
Quoted 8 lines
 net/bootp.c                                        |    4 +-
 net/eth.c                                          |    8 -
 35 files changed, 1944 insertions(+), 219 deletions(-)
 rename cpu/arm926ejs/davinci/ether.c => drivers/net/davinci_emac.c (93%)
 create mode 100644 drivers/net/kirkwood_egiga.c
 create mode 100644 drivers/net/kirkwood_egiga.h
 create mode 100644 drivers/net/phy/mv88e61xx.c
 create mode 100644 drivers/net/phy/mv88e61xx.h

Done, thanks.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"It takes all sorts of in & out-door schooling to get adapted  to  my
kind of fooling"                                           - R. Frost