powerpc/5200: add LocalPlus bus FIFO device driver
Subsystems (2)
PATCH v3 1/1 powerpc/5200: add LocalPlus bus FIFO device driver
From: Grant Likely <[email protected]>
This is a driver for the LocalPlus bus FIFO device
Signed-off-by Grant Likely <[email protected]>
---
arch/powerpc/include/asm/mpc52xx.h | 36 ++ arch/powerpc/platforms/52xx/Kconfig | 4 arch/powerpc/platforms/52xx/Makefile | 1 arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c | 458 +++++++++++++++++++++++++ 4 files changed, 499 insertions(+), 0 deletions(-) create mode 100644 arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
arch/powerpc/include/asm/mpc52xx.h +36 -0
@@ -283,6 +283,42 @@ extern int mpc52xx_gpt_start_timer(struct mpc52xx_gpt_priv *gpt, int period, int continuous);extern void mpc52xx_gpt_stop_timer (struct mpc52xx_gpt_priv *gpt); +/* mpc52xx_lpbfifo.c */ +#define MPC52XX_LPBFIFO_FLAG_READ (0) +#define MPC52XX_LPBFIFO_FLAG_WRITE (1<<0) +#define MPC52XX_LPBFIFO_FLAG_NO_INCREMENT (1<<1) +#define MPC52XX_LPBFIFO_FLAG_NO_DMA (1<<2) +#define MPC52XX_LPBFIFO_FLAG_POLL_DMA (1<<3) + +struct mpc52xx_lpbfifo_request { +struct list_head list; + +/* localplus bus address */ +unsigned int cs; +size_t offset; + +/* Memory address */ +void *data; +phys_addr_t data_phys; + +/* Details of transfer */ +size_t size; +size_t pos;/* current position of transfer */ +int flags; + +/* What to do when finished */ +void (*callback)(struct mpc52xx_lpbfifo_request *); + +void *priv;/* Driver private data */ + +/* statistics */ +int irq_count; +int irq_ticks; +}; + +extern int mpc52xx_lpbfifo_submit (struct mpc52xx_lpbfifo_request *req); +extern void mpc52xx_lpbfifo_abort (struct mpc52xx_lpbfifo_request *req); +/* mpc52xx_pic.c */ extern void mpc52xx_init_irq (void );extern unsigned int mpc52xx_get_irq (void );
arch/powerpc/platforms/52xx/Kconfig +4 -0
@@ -62,3 +62,7 @@ config PPC_MPC5200_GPIO select GENERIC_GPIO help Enable gpiolib support for mpc5200 based boards + +config PPC_MPC5200_LPBFIFO + tristate "MPC5200 LocalPlus bus FIFO driver" + depends on PPC_MPC52xx
arch/powerpc/platforms/52xx/Makefile +1 -0
@@ -15,3 +15,4 @@ ifeq ($(CONFIG_PPC_LITE5200),y) endif obj-$(CONFIG_PPC_MPC5200_GPIO) += mpc52xx_gpio.o +obj-$(CONFIG_PPC_MPC5200_LPBFIFO) += mpc52xx_lpbfifo.o
arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c new file +458 -0
458 lines not on this page · raw message