powerpc/pmac: Fix DMA ops for MacIO devices
PATCH 1/1 powerpc/pmac: Fix DMA ops for MacIO devices
The macio_dev's created to map devices inside the MacIO ASICs don't have proper dma_ops. This causes crashes on some machines since the SCSI code calls dma_map_* on our behalf using the device we hang from.
This fixes it by copying the parent PCI device dma_ops into the macio_dev when creating it.
Signed-off-by Benjamin Herrenschmidt <[email protected]>
---
drivers/macintosh/macio_asic.c | 11 +++++++++++ 1 file changed, 11 insertions(+)
drivers/macintosh/macio_asic.c +11 -0
@@ -378,6 +378,17 @@ static struct macio_dev * macio_add_one_ dev->ofdev.dev.bus = &macio_bus_type; dev->ofdev.dev.release = macio_release_dev; +#ifdef CONFIG_PCI +/* Set the DMA ops to the ones from the PCI device, this could be +* fishy if we didn't know that on PowerMac it's always direct ops +* or iommu ops that will work fine +*/ + dev->ofdev.dev.archdata.dma_ops = + chip->lbus.pdev->dev.archdata.dma_ops; + dev->ofdev.dev.archdata.dma_data = + chip->lbus.pdev->dev.archdata.dma_data; +#endif /* CONFIG_PCI */ +#ifdef DEBUG printk ("preparing mdev @%p, ofdev @%p, dev @%p, kobj @%p\n" , dev, &dev->ofdev, &dev->ofdev.dev, &dev->ofdev.dev.kobj);