Skip to contentSkip to conversation

Parallel port fixes for 2.6.31

PATCH In review Alan Cox 2 participants 5 messages Jun 22, 2009 Parallel port

lore
Share & tools
lore

Alan Cox

author
#0 lore raw

cover Parallel port fixes for 2.6.31

---

FUJITA Tomonori (1):
parport_pc: set properly the dma_mask for parport_pc device

Jens Rottmann (1):
parport_pc: after superio probing restore original register values

 drivers/parport/parport_pc.c            |   34 +
author
#1 lore raw

PATCH 1/2 parport_pc: after superio probing restore original register values

From: Jens Rottmann <[email protected]>

CONFIG_PARPORT_PC_SUPERIO probes for various superio chips by writing byte sequences to a set of different potential I/O ranges. But the probed ranges are not exclusive to parallel ports. Some of our boards just happen to have a watchdog in one of them. Took us almost a week to figure out why some distros reboot without warning after running flawlessly for 3 hours. For exactly 170 = 0xAA minutes, that is ...

Fixed by restoring original values after probing. Also fixed too small request_region() in detect_and_report_it87().

---

 drivers/parport/parport_pc.c |   31 +++++++++++++++++++++++++------
 1 files changed, 25 insertions(+), 6 deletions(-)
drivers/parport/parport_pc.c +25 -6
index 151bf5b..7f1cca7 100644
@@ -1471,11 +1471,13 @@ static void __devinit decode_smsc(int efer, int key, int devid, int devrev)
 
 static void __devinit winbond_check(int io, int key)
 {
-	int devid, devrev, oldid, x_devid, x_devrev, x_oldid;
+	int origval, devid, devrev, oldid, x_devid, x_devrev, x_oldid;
 
 	if (!request_region(io, 3, __func__))
 		return;
 
+	origval = inb(io); /* Save original value */
+
 	/* First probe without key */
 	outb(0x20, io);
 	x_devid = inb(io + 1);
@@ -1495,6 +1497,8 @@ static void __devinit winbond_check(int io, int key)
 	oldid = inb(io + 1);
 	outb(0xaa, io);    /* Magic Seal */
 
+	outb(origval, io); /* in case we poked some entirely different hardware */
+
 	if ((x_devid == devid) && (x_devrev == devrev) && (x_oldid == oldid))
 		goto out; /* protection against false positives */
 
@@ -1505,11 +1509,15 @@ out:
 
 static void __devinit winbond_check2(int io, int key)
 {
-	int devid, devrev, oldid, x_devid, x_devrev, x_oldid;
+	int origval[3], devid, devrev, oldid, x_devid, x_devrev, x_oldid;
 
 	if (!request_region(io, 3, __func__))
 		return;
 
+	origval[0] = inb(io); /* Save original values */
+	origval[1] = inb(io + 1);
+	origval[2] = inb(io + 2);
+
 	/* First probe without the key */
 	outb(0x20, io + 2);
 	x_devid = inb(io + 2);
@@ -1528,6 +1536,10 @@ static void __devinit winbond_check2(int io, int key)
 	oldid = inb(io + 2);
 	outb(0xaa, io);    /* Magic Seal */
 
+	outb(origval[0], io); /* in case we poked some entirely different hardware */
+	outb(origval[1], io + 1);
+	outb(origval[2], io + 2);
+
 	if (x_devid == devid && x_devrev == devrev && x_oldid == oldid)
 		goto out; /* protection against false positives */
 
@@ -1538,11 +1550,13 @@ out:
 
 static void __devinit smsc_check(int io, int key)
 {
-	int id, rev, oldid, oldrev, x_id, x_rev, x_oldid, x_oldrev;
+	int origval, id, rev, oldid, oldrev, x_id, x_rev, x_oldid, x_oldrev;
 
 	if (!request_region(io, 3, __func__))
 		return;
 
+	origval = inb(io); /* Save original value */
+
 	/* First probe without the key */
 	outb(0x0d, io);
 	x_oldid = inb(io + 1);
@@ -1566,6 +1580,8 @@ static void __devinit smsc_check(int io, int key)
 	rev = inb(io + 1);
 	outb(0xaa, io);    /* Magic Seal */
 
+	outb(origval, io); /* in case we poked some entirely different hardware */
+
 	if (x_id == id && x_oldrev == oldrev &&
 	    x_oldid == oldid && x_rev == rev)
 		goto out; /* protection against false positives */
@@ -1602,11 +1618,12 @@ static void __devinit detect_and_report_smsc(void)
 static void __devinit detect_and_report_it87(void)
 {
 	u16 dev;
-	u8 r;
+	u8 origval, r;
 	if (verbose_probing)
 		printk(KERN_DEBUG "IT8705 Super-IO detection, now testing port 2E ...\n");
-	if (!request_region(0x2e, 1, __func__))
+	if (!request_region(0x2e, 2, __func__))
 		return;
+	origval = inb(0x2e);		/* Save original value */
 	outb(0x87, 0x2e);
 	outb(0x01, 0x2e);
 	outb(0x55, 0x2e);
@@ -1626,8 +1643,10 @@ static void __devinit detect_and_report_it87(void)
 		outb(r | 8, 0x2F);
 		outb(0x02, 0x2E);	/* Lock */
 		outb(0x02, 0x2F);
+	} else {
+		outb(origval, 0x2e);	/* Oops, sorry to disturb */
 	}
-	release_region(0x2e, 1);
+	release_region(0x2e, 2);
 }
 #endif /* CONFIG_PARPORT_PC_SUPERIO */
 
Acked-by on v1 1/2
#2 lore raw

Re: [PATCH 1/2] parport_pc: after superio probing restore original register values

Quoted 12 lines · Alan Cox

From: Jens Rottmann <[email protected]>

CONFIG_PARPORT_PC_SUPERIO probes for various superio chips by writing byte sequences to a set of different potential I/O ranges. But the probed ranges are not exclusive to parallel ports. Some of our boards just happen to have a watchdog in one of them. Took us almost a week to figure out why some distros reboot without warning after running flawlessly for 3 hours. For exactly 170 = 0xAA minutes, that is ...

Fixed by restoring original values after probing. Also fixed too small request_region() in detect_and_report_it87().

Quoted 7 lines

---

 drivers/parport/parport_pc.c |   31 +++++++++++++++++++++++++------
 1 files changed, 25 insertions(+), 6 deletions(-)
author
#3 lore raw

PATCH 2/2 parport_pc: set properly the dma_mask for parport_pc device

In reply to Alan Cox

From: FUJITA Tomonori <[email protected]>

parport_pc_probe_port() creates the own 'parport_pc' device if the device argument is NULL. Then parport_pc_probe_port() doesn't initialize the dma_mask and coherent_dma_mask of the device and calls dma_alloc_coherent with it. dma_alloc_coherent fails because dma_alloc_coherent() doesn't accept the uninitialized dma_mask:

http://lkml.org/lkml/2009/6/16/150

Long ago, X86_32 and X86_64 had the own dma_alloc_coherent implementations; X86_32 accepted a device having dma_mask that is not initialized however X86_64 didn't. When we merged them, we chose to prohibit a device having dma_mask that is not initialized. I think that it's good to require drivers to set up dma_mask (and coherent_dma_mask) properly if the drivers want DMA.

---

 drivers/parport/parport_pc.c |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)
drivers/parport/parport_pc.c +3 -0
index 7f1cca7..1032d5f 100644
@@ -2290,6 +2290,9 @@ struct parport *parport_pc_probe_port(unsigned long int base,
 		if (IS_ERR(pdev))
 			return NULL;
 		dev = &pdev->dev;
+
+		dev->coherent_dma_mask = DMA_BIT_MASK(24);
+		dev->dma_mask = &dev->coherent_dma_mask;
 	}
 
 	ops = kmalloc(sizeof(struct parport_operations), GFP_KERNEL);
Acked-by on v1 2/2
#4 lore raw

Re: [PATCH 2/2] parport_pc: set properly the dma_mask for parport_pc device

Quoted 22 lines · Alan Cox

From: FUJITA Tomonori <[email protected]>

parport_pc_probe_port() creates the own 'parport_pc' device if the device argument is NULL. Then parport_pc_probe_port() doesn't initialize the dma_mask and coherent_dma_mask of the device and calls dma_alloc_coherent with it. dma_alloc_coherent fails because dma_alloc_coherent() doesn't accept the uninitialized dma_mask:

http://lkml.org/lkml/2009/6/16/150

Long ago, X86_32 and X86_64 had the own dma_alloc_coherent implementations; X86_32 accepted a device having dma_mask that is not initialized however X86_64 didn't. When we merged them, we chose to prohibit a device having dma_mask that is not initialized. I think that it's good to require drivers to set up dma_mask (and coherent_dma_mask) properly if the drivers want DMA.

Quoted 4 lines

---

 drivers/parport/parport_pc.c |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)