Revert "power: remove POWER_SUPPLY_PROP_CAPACITY_LEVEL"
Subsystems (2)
PATCH 4/5 Revert "power: remove POWER_SUPPLY_PROP_CAPACITY_LEVEL"
This reverts commit 8efe444038a205e79b38b7ad03878824901849a8.
[email protected] was apparently using CAPACITY_LEVEL for debugging battery/EC problems, and was upset that it was removed. This readds it.
Conflicts:
Documentation/power_supply_class.txt
Signed-off-by Andres Salomon <[email protected]>
--- Documentation/power/power_supply_class.txt | 2 ++ drivers/power/olpc_battery.c | 9 +++++++++ drivers/power/power_supply_sysfs.c | 6 ++++++ include/linux/power_supply.h | 10 ++++++++++ 4 files changed, 27 insertions(+), 0 deletions(-)
Documentation/power/power_supply_class.txt +2 -0
@@ -108,6 +108,8 @@ relative, time-based measurements. ENERGY_FULL, ENERGY_EMPTY - same as above but for energy. CAPACITY - capacity in percents. +CAPACITY_LEVEL - capacity level. This corresponds to +POWER_SUPPLY_CAPACITY_LEVEL_*. TEMP - temperature of the power supply. TEMP_AMBIENT - ambient temperature.
drivers/power/olpc_battery.c +9 -0
@@ -286,6 +286,14 @@ static int olpc_bat_get_property(struct power_supply *psy,return ret; val->intval = ec_byte;break ; +case POWER_SUPPLY_PROP_CAPACITY_LEVEL : +if (ec_byte &BAT_STAT_FULL ) + val->intval =POWER_SUPPLY_CAPACITY_LEVEL_FULL ; +else if (ec_byte &BAT_STAT_LOW ) + val->intval =POWER_SUPPLY_CAPACITY_LEVEL_LOW ; +else + val->intval =POWER_SUPPLY_CAPACITY_LEVEL_NORMAL ; +break ;case POWER_SUPPLY_PROP_TEMP : ret =olpc_ec_cmd (EC_BAT_TEMP ,NULL ,0 , (void *)&ec_word,2 );if (ret)
@@ -331,6 +339,7 @@ static enum power_supply_property olpc_bat_props[] = {POWER_SUPPLY_PROP_VOLTAGE_AVG ,POWER_SUPPLY_PROP_CURRENT_AVG ,POWER_SUPPLY_PROP_CAPACITY , +POWER_SUPPLY_PROP_CAPACITY_LEVEL ,POWER_SUPPLY_PROP_TEMP ,POWER_SUPPLY_PROP_TEMP_AMBIENT , POWER_SUPPLY_PROP_ERROR,
drivers/power/power_supply_sysfs.c +6 -0
@@ -52,6 +52,9 @@ static ssize_t power_supply_show_property(struct device *dev,"Unknown" ,"NiMH" ,"Li-ion" ,"Li-poly" ,"LiFe" ,"NiCd" , "LiMn" }; +static char *capacity_level_text[] = { +"Unknown" ,"Critical" ,"Low" ,"Normal" ,"High" ,"Full" + };ssize_t ret;struct power_supply *psy =dev_get_drvdata (dev);const ptrdiff_t off = attr - power_supply_attrs;
@@ -72,6 +75,9 @@ static ssize_t power_supply_show_property(struct device *dev,return sprintf (buf,"%s\n" , health_text[value.intval]); else if (off == POWER_SUPPLY_PROP_TECHNOLOGY) return sprintf(buf, "%s\n", technology_text[value.intval]); + else if (off == POWER_SUPPLY_PROP_CAPACITY_LEVEL) + return sprintf(buf, "%s\n", + capacity_level_text[value.intval]); else if (off >= POWER_SUPPLY_PROP_MODEL_NAME) return sprintf(buf, "%s\n", value.strval);
include/linux/power_supply.h +10 -0
@@ -59,6 +59,15 @@ enum { POWER_SUPPLY_TECHNOLOGY_LiMn, }; +enum { +POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN =0 , +POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL , +POWER_SUPPLY_CAPACITY_LEVEL_LOW , +POWER_SUPPLY_CAPACITY_LEVEL_NORMAL , +POWER_SUPPLY_CAPACITY_LEVEL_HIGH , +POWER_SUPPLY_CAPACITY_LEVEL_FULL , +}; +enum power_supply_property {/* Properties of type `int' */ POWER_SUPPLY_PROP_STATUS =0 ,
@@ -90,6 +99,7 @@ enum power_supply_property {POWER_SUPPLY_PROP_ENERGY_NOW ,POWER_SUPPLY_PROP_ENERGY_AVG ,POWER_SUPPLY_PROP_CAPACITY ,/* in percents! */ +POWER_SUPPLY_PROP_CAPACITY_LEVEL ,POWER_SUPPLY_PROP_TEMP ,POWER_SUPPLY_PROP_TEMP_AMBIENT , POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
Signature · 1 line
1.5.6.5