Skip to contentSkip to conversation

sky2: Fix checksum endianness

PATCH Applied Anton Vorontsov 2 participants 2 messages Jun 26, 2009

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 sky2: Fix checksum endianness

sky2 driver on PowerPC targets floods kernel log with following errors:

eth1: hw csum failure.

  Call Trace:
  [ef84b8a0] [c00075e4] show_stack+0x50/0x160 (unreliable)
  [ef84b8d0] [c02fa178] netdev_rx_csum_fault+0x3c/0x5c
  [ef84b8f0] [c02f6920] __skb_checksum_complete_head+0x7c/0x84
  [ef84b900] [c02f693c] __skb_checksum_complete+0x14/0x24
  [ef84b910] [c0337e08] tcp_v4_rcv+0x4c8/0x6f8
  [ef84b940] [c031a9c8] ip_local_deliver+0x98/0x210
  [ef84b960] [c031a788] ip_rcv+0x38c/0x534
  [ef84b990] [c0300338] netif_receive_skb+0x260/0x36c
  [ef84b9c0] [c025de00] sky2_poll+0x5dc/0xcf8
  [ef84ba20] [c02fb7fc] net_rx_action+0xc0/0x144

The NIC is Yukon-2 EC chip revision 1.

Converting checksum field from le16 to CPU byte order fixes the issue.

---
 drivers/net/sky2.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/net/sky2.c +1 -1
index 7681d28..daf961a 100644
@@ -2495,7 +2495,7 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
 			if (likely(status >> 16 == (status & 0xffff))) {
 				skb = sky2->rx_ring[sky2->rx_next].skb;
 				skb->ip_summed = CHECKSUM_COMPLETE;
-				skb->csum = status & 0xffff;
+				skb->csum = le16_to_cpu(status);
 			} else {
 				printk(KERN_NOTICE PFX "%s: hardware receive "
 				       "checksum problem (status = %#x)\n",
Signature · 1 line
1.6.3.1
maintainer Applied
#1 lore raw

From: Anton Vorontsov <[email protected]>
Date: Fri, 26 Jun 2009 18:51:59 +0400

Quoted 15 lines

sky2 driver on PowerPC targets floods kernel log with following errors:

eth1: hw csum failure.

  Call Trace:
  [ef84b8a0] [c00075e4] show_stack+0x50/0x160 (unreliable)
  [ef84b8d0] [c02fa178] netdev_rx_csum_fault+0x3c/0x5c
  [ef84b8f0] [c02f6920] __skb_checksum_complete_head+0x7c/0x84
  [ef84b900] [c02f693c] __skb_checksum_complete+0x14/0x24
  [ef84b910] [c0337e08] tcp_v4_rcv+0x4c8/0x6f8
  [ef84b940] [c031a9c8] ip_local_deliver+0x98/0x210
  [ef84b960] [c031a788] ip_rcv+0x38c/0x534
  [ef84b990] [c0300338] netif_receive_skb+0x260/0x36c
  [ef84b9c0] [c025de00] sky2_poll+0x5dc/0xcf8
  [ef84ba20] [c02fb7fc] net_rx_action+0xc0/0x144
Quoted 5 lines

The NIC is Yukon-2 EC chip revision 1.

Converting checksum field from le16 to CPU byte order fixes the issue.

Applied, thank you!