Skip to contentSkip to conversation

UIO driver for framebuffer

DISCUSSION vijay baskar 2 participants 2 messages Jun 25, 2009 – Jun 28, 2009

lore
Share & tools
lore
#0 lore raw

Hi all,

I have written a uio driver for framebuffer device. I added device specific register memory in uio.mem. I also added DMA param memory in uio.mem to perform DMA from userspace. Also video RAM <http://fixunix.com/#> was mapped in kernel space using dma_alloc_coherent() and a logical address was obtained. This logical address was also added in uio.mem with memtype as UIO_MEM_LOGICAL because i can fill video ram from userspace.Read and write to this DMA param memory from userspace is not having any effect. Also video RAM memory that i filled up is not getting written to the framebuffer device when DMA is started. Also one more info that i noted was that values assigned to logical addresses in kernel space are not reflected in userspace after mmap. The values in userspace show different values compared to that in kernel space. This is a bit confusing for me. Why is this happening?? Have I missed any information?? Am i on the right path??

regards,
vijai

#1 lore raw
Quoted 3 lines · vijay baskar

Hi all,

I have written a uio driver for framebuffer device.

Why? Framebuffer devices should be handled by the framebuffer subsystem which already makes the framebuffer accessible from userspace in a way that's supported by many userspace libraries. Why do you want to reinvent the wheel in an incompatible way?

Quoted 6 lines

I added device
specific register memory in uio.mem. I also added DMA param memory in uio.mem to perform DMA from userspace. Also video RAM
<http://fixunix.com/#> was mapped in kernel space using dma_alloc_coherent() and a logical address was obtained. This logical address was also added in uio.mem with memtype as UIO_MEM_LOGICAL

Quoted 8 lines

because i can fill video ram from userspace.Read and write to this DMA param memory from userspace is not having any effect. Also video RAM memory that i filled up is not getting written to the framebuffer device when DMA is started. Also one more info that i noted was that values assigned to logical addresses in kernel space are not reflected in userspace after mmap. The values in userspace show different values compared to that in kernel space.
This is a bit confusing for me.

For me too.

Quoted 2 lines

Why is this happening?? Have I missed
any information??

Yes, UIO is not for devices that are already supported by other subsystems.

Quoted 1 line

Am i on the right path??

I don't think so, unless you can provide good technical reasons for your concept.

Thanks,
Hans

Quoted 8 lines

regards,
vijai
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/