Skip to contentSkip to conversation

power_supply: ensure that the TRICKLE bit is checked in olpc_battery

PATCH Applied Andres Salomon 2 participants 2 messages Jun 30, 2009

lore
Share & tools
lore
#0 lore raw

PATCH 4/5 power_supply: ensure that the TRICKLE bit is checked in olpc_battery

There are times when the battery is present but trickle charging, and the EC sets only the TRICKLE bit.. So we must check for the bit when we're checking the charging/present status.

---
 drivers/power/olpc_battery.c |    8 +++++---
 1 files changed, 5 insertions(+), 3 deletions(-)
drivers/power/olpc_battery.c +5 -3
index c955a86..af17051 100644
@@ -35,6 +35,7 @@
 #define BAT_STAT_AC		0x10
 #define BAT_STAT_CHARGING	0x20
 #define BAT_STAT_DISCHARGING	0x40
+#define BAT_STAT_TRICKLE	0x80
 
 #define BAT_ERR_INFOFAIL	0x02
 #define BAT_ERR_OVERVOLTAGE	0x04
@@ -89,7 +90,7 @@ static char bat_serial[17]; /* Ick */
 static int olpc_bat_get_status(union power_supply_propval *val, uint8_t ec_byte)
 {
 	if (olpc_platform_info.ecver > 0x44) {
-		if (ec_byte & BAT_STAT_CHARGING)
+		if (ec_byte & (BAT_STAT_CHARGING|BAT_STAT_TRICKLE))
 			val->intval = POWER_SUPPLY_STATUS_CHARGING;
 		else if (ec_byte & BAT_STAT_DISCHARGING)
 			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
@@ -219,7 +220,8 @@ static int olpc_bat_get_property(struct power_supply *psy,
 	   It doesn't matter though -- the EC will return the last-known
 	   information, and it's as if we just ran that _little_ bit faster
 	   and managed to read it out before the battery went away. */
-	if (!(ec_byte & BAT_STAT_PRESENT) && psp != POWER_SUPPLY_PROP_PRESENT)
+	if (!(ec_byte & (BAT_STAT_PRESENT|BAT_STAT_TRICKLE)) &&
+			psp != POWER_SUPPLY_PROP_PRESENT)
 		return -ENODEV;
 
 	switch (psp) {
@@ -229,7 +231,7 @@ static int olpc_bat_get_property(struct power_supply *psy,
 			return ret;
 		break;
 	case POWER_SUPPLY_PROP_PRESENT:
-		val->intval = !!(ec_byte & BAT_STAT_PRESENT);
+		val->intval = !!(ec_byte & (BAT_STAT_PRESENT|BAT_STAT_TRICKLE));
 		break;
 
 	case POWER_SUPPLY_PROP_HEALTH:
Signature · 1 line
1.5.6.5
#1 lore raw
Quoted 7 lines · Andres Salomon

There are times when the battery is present but trickle charging, and the EC sets only the TRICKLE bit.. So we must check for the bit when we're checking the charging/present status.

---

Applied to battery-2.6.31.git, plus some cosmetic changes were made, so please ensure that the patches are still fine.

Thanks.

Quoted 47 lines
 drivers/power/olpc_battery.c |    8 +++++---
 1 files changed, 5 insertions(+), 3 deletions(-)
drivers/power/olpc_battery.c +5 -3
index c955a86..af17051 100644
@@ -35,6 +35,7 @@
 #define BAT_STAT_AC		0x10
 #define BAT_STAT_CHARGING	0x20
 #define BAT_STAT_DISCHARGING	0x40
+#define BAT_STAT_TRICKLE	0x80
 
 #define BAT_ERR_INFOFAIL	0x02
 #define BAT_ERR_OVERVOLTAGE	0x04
@@ -89,7 +90,7 @@ static char bat_serial[17]; /* Ick */
 static int olpc_bat_get_status(union power_supply_propval *val, uint8_t ec_byte)
 {
 	if (olpc_platform_info.ecver > 0x44) {
-		if (ec_byte & BAT_STAT_CHARGING)
+		if (ec_byte & (BAT_STAT_CHARGING|BAT_STAT_TRICKLE))
 			val->intval = POWER_SUPPLY_STATUS_CHARGING;
 		else if (ec_byte & BAT_STAT_DISCHARGING)
 			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
@@ -219,7 +220,8 @@ static int olpc_bat_get_property(struct power_supply *psy,
 	   It doesn't matter though -- the EC will return the last-known
 	   information, and it's as if we just ran that _little_ bit faster
 	   and managed to read it out before the battery went away. */
-	if (!(ec_byte & BAT_STAT_PRESENT) && psp != POWER_SUPPLY_PROP_PRESENT)
+	if (!(ec_byte & (BAT_STAT_PRESENT|BAT_STAT_TRICKLE)) &&
+			psp != POWER_SUPPLY_PROP_PRESENT)
 		return -ENODEV;
 
 	switch (psp) {
@@ -229,7 +231,7 @@ static int olpc_bat_get_property(struct power_supply *psy,
 			return ret;
 		break;
 	case POWER_SUPPLY_PROP_PRESENT:
-		val->intval = !!(ec_byte & BAT_STAT_PRESENT);
+		val->intval = !!(ec_byte & (BAT_STAT_PRESENT|BAT_STAT_TRICKLE));
 		break;
 
 	case POWER_SUPPLY_PROP_HEALTH:
Signature · 1 line
1.5.6.5
Signature · 3 lines
Anton Vorontsov
email: [email protected]
irc://irc.freenode.net/bd2