Skip to contentSkip to conversation

alsa-info.sh updates

PATCH In review Wu Fengguang 4 participants 12 messages Jul 8, 2009 – Jul 16, 2009

lore
Share & tools
lore
#0 lore raw

cover alsa-info.sh updates

Hi Takashi,

This patchset mainly disables the auto-upload of alsa info by default.

Comments are welcome.

Thanks,
Fengguang

#1 lore raw

PATCH 1/4 alsa-info.sh: Do not automatically upload alsa info

- the greeting dialog informs that the script collects info, waits for OK button. It affords a concrete listing of information to collect:
/proc/asound/, aplay, etc. This not only shows respect for user privacy, but also serves as basic debugging tips for ALSA newbies.
- when --upload option is given, the data will be automatically uploaded.
- when --no-upload option is given, the data is just stored locally and quit.
- when neither options are given, show a dialog to ask to upload or not.

The above ideas mostly come from Takashi.

---
 utils/alsa-info.sh |  115 +++++++++++++++++++++++--------------------
 1 file changed, 63 insertions(+), 52 deletions(-)
utils/alsa-info.sh +63 -52
@@ -36,10 +36,12 @@ PASTEBINKEY="C9cRIO8m/9y8Cs0nVs0FraRx7U0
 #Define some simple functions
 
 pbcheck(){
+	[[ $UPLOAD = "no" ]] && return
+
 	if [[ -z $PASTEBIN ]]; then
-		[[ $(ping -c1 www.alsa-project.org) ]] || KEEP_FILES="yes" NOUPLOAD="yes" PBERROR="yes"
+		[[ $(ping -c1 www.alsa-project.org) ]] || KEEP_FILES="yes" UPLOAD="no" PBERROR="yes"
 	else
-		[[ $(ping -c1 www.pastebin.ca) ]] || KEEP_FILES="yes" NOUPLOAD="yes" PBERROR="yes"
+		[[ $(ping -c1 www.pastebin.ca) ]] || KEEP_FILES="yes" UPLOAD="no" PBERROR="yes"
 	fi
 }
 
@@ -289,18 +291,24 @@ SNDOPTIONS=$(modprobe -c|sed -n 's/^opti
 
 PASTEBIN=""
 WWWSERVICE="www.alsa-project.org"
-QUESTION="yes"
+WELCOME="yes"
 PROCEED="yes"
+UPLOAD="ask"
 REPEAT=""
 while [ -z "$REPEAT" ]; do
 REPEAT="no"
 case "$1" in
 	--update|--help|--about)
-		QUESTION="no"
+		WELCOME="no"
 		PROCEED="no"
 		;;
+	--upload)
+		UPLOAD="yes"
+		WELCOME="no"
+		;;
 	--no-upload)
-		NOUPLOAD="yes"
+		UPLOAD="no"
+		WELCOME="no"
 		;;
 	--pastebin)
 		PASTEBIN="yes"
@@ -313,28 +321,18 @@ case "$1" in
 		;;
 	--stdout)
 		DIALOG=""
-		NOUPLOAD="yes"
-		QUESTION="no"
+		UPLOAD="no"
+		WELCOME="no"
 		TOSTDOUT="yes"
 		;;
 esac
 done
-		
+
 
 #Script header output.
-if [ "$QUESTION" = "yes" ]; then
-if [[ -n "$DIALOG" ]]
-then
-if [ -z "$NOUPLOAD" ]; then
-	dialog --backtitle "$BGTITLE" --title "ALSA-Info script v $SCRIPT_VERSION" --yesno "\nThis script will collect information about your ALSA installation and sound related hardware, to help diagnose your problem\n\nBy default, this script will AUTOMATICALLY UPLOAD your information to a $WWWSERVICE site.\n\nSee $0 --help for options\n\nDo you want to run this script?" 0 0
-else
-	dialog --backtitle "$BGTITLE" --title "ALSA-Info script v $SCRIPT_VERSION" --yesno "\nThis script will collect information about your ALSA installation and sound related hardware, to help diagnose your problem\n\nSee $0 --help for options\n\nDo you want to run this script?" 0 0
-fi
-DIALOG_EXIT_CODE=$?
-if [ $DIALOG_EXIT_CODE != 0 ]; then
-echo "Thank you for using the ALSA-Info Script"
-exit 0;
-fi
+if [ "$WELCOME" = "yes" ]; then
+if [[ -n "$DIALOG" ]]; then
+	dialog --backtitle "$BGTITLE" --title "ALSA-Info script v $SCRIPT_VERSION" --msgbox "\nThis script visits the following commands/files to collect diagnostic information about your ALSA installation and sound related hardware.\n\n  lspci\n  lsmod\n  aplay\n  amixer\n  alsactl\n  /proc/asound/\n  /sys/class/sound/\n  ~/.asoundrc (etc.)\n\nSee '$0 --help' for command line options.\n" 20 80
 else
 
 echo "ALSA Information Script v $SCRIPT_VERSION"
@@ -342,27 +340,8 @@ echo "--------------------------------"
 echo ""
 echo "This script will collect information about your ALSA installation and sound related hardware, to help diagnose your problem."
 echo ""
-if [ -z "$NOUPLOAD" ]; then
-if [[ -n "$TPUT" ]]; then
-tput bold
-echo "By default, the collected information will be AUTOMATICALLY uploaded to a $WWWSERVICE site."
-echo "If you do not wish for this to occur, run the script with the --no-upload argument"
-tput sgr0
-else
-echo "By default, the collected information will be AUTOMATICALLY uploaded to a $WWWSERVICE site."
-echo "If you do not wish for this to occur, run the script with the --no-upload argument"
-fi
-echo ""
-fi # NOUPLOAD
-echo -n "Do you want to run this script? [y/n] : "
-read -e CONFIRM
-if [ "$CONFIRM" != "y" ]; then
-echo ""
-echo "Thank you for using the ALSA-Info Script"
-exit 0;
-fi
-fi
-fi # question
+fi # dialog
+fi # WELCOME
 
 #Set the output file
 TEMPDIR=`mktemp -p /tmp -d alsa-info.XXXXXXXXXX`
@@ -609,8 +588,18 @@ then
 			update
 			exit
 			;;
+		--upload)
+			UPLOAD="yes"
+			withdevices
+			withconfigs
+			withaplay
+			withamixer
+			withalsactl
+			withlsmod
+			withsysfs
+			;;
 		--no-upload)
-			NOUPLOAD="yes"
+			UPLOAD="no"
 			withdevices
 			withconfigs
 			withaplay
@@ -681,7 +670,7 @@ then
 			fi
 			;;
 		--stdout)
-			NOUPLOAD="yes"
+			UPLOAD="no"
 			withdevices
 			withconfigs
 			withaplay
@@ -714,6 +703,7 @@ then
 			echo "	--with-devices (shows the device nodes in /dev/snd/)"
 			echo ""
 			echo "	--update (check server for script updates)"
+			echo "	--upload (upload contents to remote server)"
 			echo "	--no-upload (do not upload contents to remote server)"
 			echo "	--pastebin (use http://pastebin.ca) as remote server"
 			echo "	    instead www.alsa-project.org"
@@ -733,7 +723,28 @@ if [ "$PROCEED" = "no" ]; then
 	exit 1
 fi
 
-if [ -n "$NOUPLOAD" ]; then
+if [ "$UPLOAD" = "ask" ]; then
+	if [[ -n "$DIALOG" ]]; then
+		dialog --backtitle "$BGTITLE" --title "Information collected" --yes-label " UPLOAD / SHARE " --no-label " SAVE LOCALLY " --defaultno --yesno "\n\nAutomatically upload ALSA information to $WWWSERVICE?" 10 80
+		DIALOG_EXIT_CODE=$?
+		if [ $DIALOG_EXIT_CODE != 0 ]; then
+			UPLOAD="no"
+		else
+			UPLOAD="yes"
+		fi
+	else
+		echo -n "Automatically upload ALSA information to $WWWSERVICE? [y/N] : "
+		read -e CONFIRM
+		if [ "$CONFIRM" != "y" ]; then
+			UPLOAD="no"
+		else
+			UPLOAD="yes"
+		fi
+	fi
+
+fi
+
+if [ "$UPLOAD" = "no" ]; then
 
 	if [ -z "$TOSTDOUT" ]; then
 		mv $FILE $NFILE || exit 1
@@ -742,23 +753,23 @@ if [ -n "$NOUPLOAD" ]; then
 	if [[ -n $DIALOG ]]
 	then
 		if [[ -n $PBERROR ]]; then
-			dialog --backtitle "$BGTITLE" --title "Information collected" --msgbox "An error occurred while contacting the $WWWSERVICE. Your information was NOT automatically uploaded.\n\nYour ALSA information can be seen by looking in $NFILE" 10 100
+			dialog --backtitle "$BGTITLE" --title "Information collected" --msgbox "An error occurred while contacting the $WWWSERVICE.\n Your information was NOT automatically uploaded.\n\nYour ALSA information is in $NFILE" 10 100
 		else
-			dialog --backtitle "$BGTITLE" --title "Information collected" --msgbox "You requested that your information was NOT automatically uploaded to the $WWWSERVICE\n\nYour ALSA information can be seen by looking in $NFILE" 10 100
+			dialog --backtitle "$BGTITLE" --title "Information collected" --msgbox "\n\nYour ALSA information is in $NFILE" 10 60
 		fi
 	else
 		echo
 
 		if [[ -n $PBERROR ]]; then
-			echo "An error occurred while contacting the $WWWSERVICE. Your information was NOT automatically uploaded."
+			echo "An error occurred while contacting the $WWWSERVICE."
+			echo "Your information was NOT automatically uploaded."
 			echo ""
-			echo "Your ALSA information can be seen by looking in $NFILE"
+			echo "Your ALSA information is in $NFILE"
 			echo ""
 		else
 			if [ -z "$TOSTDOUT" ]; then
-				echo "You requested that your information was NOT automatically uploaded to the $WWWSERVICE"
 				echo ""
-				echo "Your ALSA information can be seen by looking in $NFILE"
+				echo "Your ALSA information is in $NFILE"
 				echo ""
 			fi
 		fi
@@ -766,7 +777,7 @@ if [ -n "$NOUPLOAD" ]; then
 
 	exit
 
-fi # noupload
+fi # UPLOAD
 
 #Test that wget is installed, and supports --post-file. Upload $FILE if it does, and prompt user to upload file if it doesnt. 
 if
#2 lore raw

Re: [PATCH 1/4] alsa-info.sh: Do not automatically upload alsa info

Quoted 9 lines · Fengguang

- the greeting dialog informs that the script collects info, waits for OK button. It affords a concrete listing of information to collect:
/proc/asound/, aplay, etc. This not only shows respect for user privacy, but also serves as basic debugging tips for ALSA newbies.
- when --upload option is given, the data will be automatically uploaded.
- when --no-upload option is given, the data is just stored locally and quit.
- when neither options are given, show a dialog to ask to upload or not.

The above ideas mostly come from Takashi.

With this patch the dialogs will look like:

 ┌─────────────────────────ALSA-Info script v 0.4.56────────────────────────────┐
 │                                                                              │  
 │ This script visits the following commands/files to collect diagnostic        │  
 │ information about your ALSA installation and sound related hardware.         │  
 │                                                                              │  
 │   lspci                                                                      │  
 │   lsmod                                                                      │  
 │   aplay                                                                      │  
 │   amixer                                                                     │  
 │   alsactl                                                                    │  
 │   /proc/asound/                                                              │  
 │   /sys/class/sound/                                                          │  
 │   ~/.asoundrc (etc.)                                                         │  
 │                                                                              │  
 │ See './alsa-info.sh --help' for command line options.                        │  
 │                                                                              │  
 │                                                                              │  
 ├──────────────────────────────────────────────────────────────────────────────┤  
 │                                   <  OK  >                                   │  
 └──────────────────────────────────────────────────────────────────────────────┘  
 ┌───────────────────────────Information collected──────────────────────────────┐
 │                                                                              │  
 │                                                                              │  
 │ Automatically upload ALSA information to www.alsa-project.org?               │  
 │                                                                              │  
 │                                                                              │  
 │                                                                              │  
 ├──────────────────────────────────────────────────────────────────────────────┤  
 │               < UPLOAD / SHARE >        <  SAVE LOCALLY  >                   │  
 └──────────────────────────────────────────────────────────────────────────────┘  
           ┌─────────────────Information collected────────────────────┐
           │                                                          │  
           │                                                          │  
           │ Your ALSA information is in /tmp/alsa-info.txt           │  
           │                                                          │  
           │                                                          │  
           │                                                          │  
           ├──────────────────────────────────────────────────────────┤  
           │                         <  OK  >                         │  
           └──────────────────────────────────────────────────────────┘  

Thanks,
Fengguang

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

#3 lore raw

PATCH 2/4 alsa-info.sh: fix whitespace leaked to stdout

In reply to Wu Fengguang

Redirect the "echo \t" outputs to the desired file, and avoid messing up stdio.

---
 utils/alsa-info.sh |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
utils/alsa-info.sh +4 -1
@@ -519,7 +519,10 @@ echo "!!--------------------------" >> $
 echo "" >> $FILE
 for mod in `cat /proc/asound/modules|awk {'print $2'}`;do
 echo "!!Module: $mod" >> $FILE
-for params in `ls $SYSFS/module/$mod/parameters/*`; do /bin/echo -ne "\t";/bin/echo "$params : `cat $params`"|sed 's:.*/::' >> $FILE;done
+for params in `echo $SYSFS/module/$mod/parameters/*`; do
+	echo -ne "\t";
+	echo "$params : `cat $params`" | sed 's:.*/::';
+done >> $FILE
 echo "" >> $FILE
 done
 echo "" >> $FILE
#4 lore raw

PATCH 3/4 alsa-info.sh: let mv fail loudly

In reply to Wu Fengguang

When mv cannot overwrite target file, it will prompt and return TRUE. Add the '-f' option so that it returns FALSE when failed.

---
 utils/alsa-info.sh |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
utils/alsa-info.sh +4 -4
@@ -74,7 +74,7 @@ update() {
 					echo "Please re-run the script"
 					rm $SHFILE 2>/dev/null
 				else
-					mv $SHFILE /tmp/alsa-info.sh || exit 1
+					mv -f $SHFILE /tmp/alsa-info.sh || exit 1
 					echo "ALSA-Info script has been downloaded as /tmp/alsa-info.sh."
 					echo "Please re-run the script from new location."
 				fi
@@ -92,7 +92,7 @@ update() {
 				echo "ALSA-Info script has been updated. Please re-run it."
 				rm $SHFILE 2>/dev/null
 			else
-				mv $SHFILE /tmp/alsa-info.sh || exit 1
+				mv -f $SHFILE /tmp/alsa-info.sh || exit 1
 				echo "ALSA-Info script has been downloaded as /tmp/alsa-info.sh."
 				echo "Please, re-run it from new location."
 			fi
@@ -750,7 +750,7 @@ fi
 if [ "$UPLOAD" = "no" ]; then
 
 	if [ -z "$TOSTDOUT" ]; then
-		mv $FILE $NFILE || exit 1
+		mv -f $FILE $NFILE || exit 1
 	fi
 
 	if [[ -n $DIALOG ]]
@@ -863,7 +863,7 @@ echo ""
 
 #We couldnt find a suitable wget, so tell the user to upload manually.
 else
-	mv $FILE $NFILE || exit 1
+	mv -f $FILE $NFILE || exit 1
 	if [[ -z $DIALOG ]]
 	then
 		if [[ -z $PASTEBIN ]]; then
#5 lore raw

PATCH 4/4 alsa-info.sh: introduce withall()

In reply to Wu Fengguang

This merges duplicate code. The only behavior change is, we will now call withsysfs() when no options are provided. I guess this is desired info.

---
 utils/alsa-info.sh |   64 +++++++++++--------------------------------
 1 file changed, 17 insertions(+), 47 deletions(-)
utils/alsa-info.sh +17 -47
@@ -243,6 +243,16 @@ withsysfs() {
     fi
 }
 
+withall() {
+	withdevices
+	withconfigs
+	withaplay
+	withamixer
+	withalsactl
+	withlsmod
+	withsysfs
+}
+
 get_alsa_library_version() {
 	ALSA_LIB_VERSION=`grep VERSION_STR /usr/include/alsa/version.h 2>/dev/null|awk {'print $3'}|sed 's/"//g'`
 
@@ -559,12 +569,7 @@ fi
 if [[ -z "$1" ]]
 then
 	update
-	withdevices
-	withconfigs
-	withaplay
-	withamixer
-	withalsactl
-	withlsmod
+	withall
 	pbcheck	
 fi
 
@@ -578,13 +583,7 @@ then
 	case "$1" in
 		--pastebin)
 		        update
-        		withdevices
-        		withconfigs
-        		withaplay
-        		withamixer
-        		withalsactl
-        		withlsmod
-			withsysfs
+			withall
         		pbcheck
 			;;
 		--update)
@@ -593,44 +592,20 @@ then
 			;;
 		--upload)
 			UPLOAD="yes"
-			withdevices
-			withconfigs
-			withaplay
-			withamixer
-			withalsactl
-			withlsmod
-			withsysfs
+			withall
 			;;
 		--no-upload)
 			UPLOAD="no"
-			withdevices
-			withconfigs
-			withaplay
-			withamixer
-			withalsactl
-			withlsmod
-			withsysfs
+			withall
 			;;
 		--debug)
 			echo "Debugging enabled. $FILE and $TEMPDIR will not be deleted"
 			KEEP_FILES="yes"
 			echo ""
-			withdevices
-			withconfigs
-			withaplay
-			withamixer
-			withalsactl
-			withlsmod
-			withsysfs
+			withall
 			;;
 		--with-all)
-			withdevices
-			withconfigs
-			withaplay
-			withamixer
-			withalsactl
-			withlsmod
-			withsysfs
+			withall
 			;;
 		--with-aplay)
 			withaplay
@@ -674,12 +649,7 @@ then
 			;;
 		--stdout)
 			UPLOAD="no"
-			withdevices
-			withconfigs
-			withaplay
-			withamixer
-			withalsactl
-			withlsmod
+			withall
 			cat $FILE
 			rm $FILE
 			;;
#6 lore raw
In reply to Wu Fengguang

At Wed, 08 Jul 2009 21:07:22 +0800,

Quoted 6 lines · Wu Fengguang

Hi Takashi,

This patchset mainly disables the auto-upload of alsa info by default.

Comments are welcome.

I'd like these changes...
Anyone still against changing the default behavior not to upload?

Takashi

#7 lore raw
Quoted 1 line · Takashi Iwai

Anyone still against changing the default behavior not to upload?

For some time the default behaviour for interactive debugging in various IRC channels has been to use --no-upload, so no, no protest from me.

#8 lore raw
Quoted 6 lines · Daniel Chen
Quoted 1 line · Takashi Iwai

Anyone still against changing the default behavior not to upload?

For some time the default behaviour for interactive debugging in various IRC channels has been to use --no-upload, so no, no protest from me.

It's also good from a general privacy point of view.

#9 lore raw
In reply to Wu Fengguang

At Wed, 08 Jul 2009 21:07:22 +0800,

Quoted 4 lines · Wu Fengguang

Hi Takashi,

This patchset mainly disables the auto-upload of alsa info by default.

I pushed the patches now. Thanks!

Takashi

#10 lore raw

PATCH 1/1 alsa-info.sh: add dmesg info on ALSA/HDA

Quoted 8 lines · Takashi Iwai

At Wed, 08 Jul 2009 21:07:22 +0800,

Quoted 4 lines · Wu Fengguang

Hi Takashi,

This patchset mainly disables the auto-upload of alsa info by default.

I pushed the patches now. Thanks!

Thank you!

btw, I find it often necessary to query user for the dmesg info. How about adding dmesg to alsa-info?

Thanks,
Fengguang
---
alsa-info.sh: add dmesg info on ALSA/HDA

Add outputs:
dmesg | grep -E 'ALSA|HDA|HDMI|sound|hda.codec|hda.intel'
which should cover most ALSA HDA kernel messages.

---
 utils/alsa-info.sh |   44 ++++++++++++++++++++++++++++++++++++-------
 1 file changed, 37 insertions(+), 7 deletions(-)
utils/alsa-info.sh +37 -7
@@ -243,6 +243,15 @@ withsysfs() {
     fi
 }
 
+withdmesg() {
+	echo "!!ALSA/HDA dmesg" >> $FILE
+	echo "!!------------------" >> $FILE
+	echo "" >> $FILE
+	dmesg | grep -E 'ALSA|HDA|HDMI|sound|hda.codec|hda.intel' >> $FILE
+	echo "" >> $FILE
+	echo "" >> $FILE
+}
+
 withall() {
 	withdevices
 	withconfigs
@@ -251,6 +260,7 @@ withall() {
 	withalsactl
 	withlsmod
 	withsysfs
+	withdmesg
 }
 
 get_alsa_library_version() {
@@ -341,15 +351,31 @@ done
 
 #Script header output.
 if [ "$WELCOME" = "yes" ]; then
+greeting_message="\
+
+This script visits the following commands/files to collect diagnostic
+information about your ALSA installation and sound related hardware.
+
+  dmesg
+  lspci
+  lsmod
+  aplay
+  amixer
+  alsactl
+  /proc/asound/
+  /sys/class/sound/
+  ~/.asoundrc (etc.)
+
+See '$0 --help' for command line options.
+"
 if [[ -n "$DIALOG" ]]; then
-	dialog --backtitle "$BGTITLE" --title "ALSA-Info script v $SCRIPT_VERSION" --msgbox "\nThis script visits the following commands/files to collect diagnostic information about your ALSA installation and sound related hardware.\n\n  lspci\n  lsmod\n  aplay\n  amixer\n  alsactl\n  /proc/asound/\n  /sys/class/sound/\n  ~/.asoundrc (etc.)\n\nSee '$0 --help' for command line options.\n" 20 80
+	dialog  --backtitle "$BGTITLE" \
+		--title "ALSA-Info script v $SCRIPT_VERSION" \
+		--msgbox "$greeting_message" 20 80
 else
-
-echo "ALSA Information Script v $SCRIPT_VERSION"
-echo "--------------------------------"
-echo ""
-echo "This script will collect information about your ALSA installation and sound related hardware, to help diagnose your problem."
-echo ""
+	echo "ALSA Information Script v $SCRIPT_VERSION"
+	echo "--------------------------------"
+	echo "$greeting_message"
 fi # dialog
 fi # WELCOME
 
@@ -619,6 +645,9 @@ then
 		--with-devices)
 			withdevices
 			;;
+		--with-dmesg)
+			withdmesg
+			;;
 		--with-configs)
 			if [[ -e $HOME/.asoundrc ]] || [[ -e /etc/asound.conf ]]
 			then
@@ -674,6 +703,7 @@ then
 			echo "	--with-configs (includes the output of ~/.asoundrc and"
 			echo "	    /etc/asound.conf if they exist)" 
 			echo "	--with-devices (shows the device nodes in /dev/snd/)"
+			echo "	--with-dmesg (shows the ALSA/HDA kernel messages)"
 			echo ""
 			echo "	--update (check server for script updates)"
 			echo "	--upload (upload contents to remote server)"
#11 lore raw

Re: [PATCH] alsa-info.sh: add dmesg info on ALSA/HDA

At Thu, 16 Jul 2009 19:24:06 +0800,

Quoted 7 lines · Wu Fengguang
Quoted 5 lines · Takashi Iwai

At Wed, 08 Jul 2009 21:07:22 +0800,

Quoted 3 lines · Wu Fengguang

Hi Takashi,

Quoted 8 lines
Quoted 3 lines
Quoted 1 line

This patchset mainly disables the auto-upload of alsa info by default.

I pushed the patches now. Thanks!

Thank you!

btw, I find it often necessary to query user for the dmesg info. How about adding dmesg to alsa-info?

A good idea. Applied now. Thanks!

Takashi

Quoted 99 lines

Thanks,
Fengguang
---
alsa-info.sh: add dmesg info on ALSA/HDA

Add outputs:
dmesg | grep -E 'ALSA|HDA|HDMI|sound|hda.codec|hda.intel'
which should cover most ALSA HDA kernel messages.

---
 utils/alsa-info.sh |   44 ++++++++++++++++++++++++++++++++++++-------
 1 file changed, 37 insertions(+), 7 deletions(-)
utils/alsa-info.sh +37 -7
@@ -243,6 +243,15 @@ withsysfs() {
     fi
 }
 
+withdmesg() {
+	echo "!!ALSA/HDA dmesg" >> $FILE
+	echo "!!------------------" >> $FILE
+	echo "" >> $FILE
+	dmesg | grep -E 'ALSA|HDA|HDMI|sound|hda.codec|hda.intel' >> $FILE
+	echo "" >> $FILE
+	echo "" >> $FILE
+}
+
 withall() {
 	withdevices
 	withconfigs
@@ -251,6 +260,7 @@ withall() {
 	withalsactl
 	withlsmod
 	withsysfs
+	withdmesg
 }
 
 get_alsa_library_version() {
@@ -341,15 +351,31 @@ done
 
 #Script header output.
 if [ "$WELCOME" = "yes" ]; then
+greeting_message="\
+
+This script visits the following commands/files to collect diagnostic
+information about your ALSA installation and sound related hardware.
+
+  dmesg
+  lspci
+  lsmod
+  aplay
+  amixer
+  alsactl
+  /proc/asound/
+  /sys/class/sound/
+  ~/.asoundrc (etc.)
+
+See '$0 --help' for command line options.
+"
 if [[ -n "$DIALOG" ]]; then
-	dialog --backtitle "$BGTITLE" --title "ALSA-Info script v $SCRIPT_VERSION" --msgbox "\nThis script visits the following commands/files to collect diagnostic information about your ALSA installation and sound related hardware.\n\n  lspci\n  lsmod\n  aplay\n  amixer\n  alsactl\n  /proc/asound/\n  /sys/class/sound/\n  ~/.asoundrc (etc.)\n\nSee '$0 --help' for command line options.\n" 20 80
+	dialog  --backtitle "$BGTITLE" \
+		--title "ALSA-Info script v $SCRIPT_VERSION" \
+		--msgbox "$greeting_message" 20 80
 else
-
-echo "ALSA Information Script v $SCRIPT_VERSION"
-echo "--------------------------------"
-echo ""
-echo "This script will collect information about your ALSA installation and sound related hardware, to help diagnose your problem."
-echo ""
+	echo "ALSA Information Script v $SCRIPT_VERSION"
+	echo "--------------------------------"
+	echo "$greeting_message"
 fi # dialog
 fi # WELCOME
 
@@ -619,6 +645,9 @@ then
 		--with-devices)
 			withdevices
 			;;
+		--with-dmesg)
+			withdmesg
+			;;
 		--with-configs)
 			if [[ -e $HOME/.asoundrc ]] || [[ -e /etc/asound.conf ]]
 			then
@@ -674,6 +703,7 @@ then
 			echo "	--with-configs (includes the output of ~/.asoundrc and"
 			echo "	    /etc/asound.conf if they exist)" 
 			echo "	--with-devices (shows the device nodes in /dev/snd/)"
+			echo "	--with-dmesg (shows the ALSA/HDA kernel messages)"
 			echo ""
 			echo "	--update (check server for script updates)"
 			echo "	--upload (upload contents to remote server)"