Skip to contentSkip to conversation

ixgbe: Fix coexistence of FCoE and Flow Director in 82599

PATCH Applied Jeff Kirsher 2 participants 2 messages Jul 9, 2009 – Jul 10, 2009

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ixgbe: Fix coexistence of FCoE and Flow Director in 82599

From: Yi Zou <[email protected]>

Fix coexistence of Fiber Channel over Ethernet (FCoE) and Flow Director (FDIR) in 82599 and remove the disabling of FDIR when FCoE is enabled.

Currently, FDIR is turned off when FCoE is enabled under the assumption that FCoE is always enabled with DCB being turned on. However, FDIR does not have to be turned off all the time when FCoE is enabled since FCoE can be enabled without DCB being turned on, e.g., use link pause only. This patch makes sure that when DCB is turned on or off, FDIR is turned on or off correspondingly; and when FCoE is enabled, it does not disable FDIR, rather, it will have FDIR set up properly so FCoE and FDIR can coexist regardless of DCB being on or off.

---

 drivers/net/ixgbe/ixgbe_dcb_nl.c |    6 ++++++
 drivers/net/ixgbe/ixgbe_main.c   |   19 +++++++++++--------
 2 files changed, 17 insertions(+), 8 deletions(-)
drivers/net/ixgbe/ixgbe_dcb_nl.c +6 -0
index d56890f..7c5978a 100644
@@ -138,6 +138,10 @@ static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state)
 			adapter->hw.fc.requested_mode = ixgbe_fc_none;
 		}
 		adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED;
+		if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
+			adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
+			adapter->flags &= ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
+		}
 		adapter->flags |= IXGBE_FLAG_DCB_ENABLED;
 		ixgbe_init_interrupt_scheme(adapter);
 		if (netif_running(netdev))
@@ -154,6 +158,8 @@ static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state)
 			adapter->dcb_cfg.pfc_mode_enable = false;
 			adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED;
 			adapter->flags |= IXGBE_FLAG_RSS_ENABLED;
+			if (adapter->hw.mac.type == ixgbe_mac_82599EB)
+				adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
 			ixgbe_init_interrupt_scheme(adapter);
 			if (netif_running(netdev))
 				netdev->netdev_ops->ndo_open(netdev);
drivers/net/ixgbe/ixgbe_main.c +11 -8
index a3061aa..e3442f4 100644
@@ -3130,7 +3130,11 @@ static inline bool ixgbe_set_fcoe_queues(struct ixgbe_adapter *adapter)
 #endif
 		if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
 			DPRINTK(PROBE, INFO, "FCOE enabled with RSS \n");
-			ixgbe_set_rss_queues(adapter);
+			if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) ||
+			    (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))
+				ixgbe_set_fdir_queues(adapter);
+			else
+				ixgbe_set_rss_queues(adapter);
 		}
 		/* adding FCoE rx rings to the end */
 		f->mask = adapter->num_rx_queues;
@@ -3388,7 +3392,12 @@ static inline bool ixgbe_cache_ring_fcoe(struct ixgbe_adapter *adapter)
 		}
 #endif /* CONFIG_IXGBE_DCB */
 		if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
-			ixgbe_cache_ring_rss(adapter);
+			if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) ||
+			    (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))
+				ixgbe_cache_ring_fdir(adapter);
+			else
+				ixgbe_cache_ring_rss(adapter);
+
 			fcoe_i = f->mask;
 		}
 		for (i = 0; i < f->indices; i++, fcoe_i++)
@@ -5578,12 +5587,6 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 				netdev->features |= NETIF_F_FCOE_CRC;
 				netdev->features |= NETIF_F_FSO;
 				netdev->fcoe_ddp_xid = IXGBE_FCOE_DDP_MAX - 1;
-				DPRINTK(DRV, INFO, "FCoE enabled, "
-					"disabling Flow Director\n");
-				adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
-				adapter->flags &=
-				        ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
-				adapter->atr_sample_rate = 0;
 			} else {
 				adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED;
 			}
maintainer Applied
#1 lore raw

From: Jeff Kirsher <[email protected]>
Date: Thu, 09 Jul 2009 05:29:50 -0700

Quoted 13 lines

From: Yi Zou <[email protected]>

Fix coexistence of Fiber Channel over Ethernet (FCoE) and Flow Director (FDIR) in 82599 and remove the disabling of FDIR when FCoE is enabled.

Currently, FDIR is turned off when FCoE is enabled under the assumption that FCoE is always enabled with DCB being turned on. However, FDIR does not have to be turned off all the time when FCoE is enabled since FCoE can be enabled without DCB being turned on, e.g., use link pause only. This patch makes sure that when DCB is turned on or off, FDIR is turned on or off correspondingly; and when FCoE is enabled, it does not disable FDIR, rather, it will have FDIR set up properly so FCoE and FDIR can coexist regardless of DCB being on or off.

Quoted 2 lines

Applied.