Marvell MV88F6281GTW_GE Board support
PATCH v12 1/1 Marvell MV88F6281GTW_GE Board support
This is Marvell's 88F6281_A0 based custom board developed for wireless access point product
This patch is tested for-
1. Boot from DRAM/SPI flash/NFS
2. File transfer using tftp and loadb
3. SPI flash read/write/erase
4. Booting Linux kernel and RFS from SPI flash
5. Boot from USB supported
---
Change log
v2: updated as per first review comments debug_prints updated to debug
v3: updaed as per review comments for v2 added mv88f6281gtw_ge.h file removed BITxx macros
v4: updated as per review comments for v3 arch_misc_init support is added and used from kirkwood
v5: updated as per review comments for v4 CONFIG_MACH_MV88F6281GTW_GE added more comments added and serial configuration removed from mv88f6281gtw_ge.c
V6: clean switch configuration using netdev.h
v7: Marvell copyright removed from u-boot.lds Maintainer added for this board
v8: u-boot.lds removed
finetuned for cosmetic and switch related changes
v9: new mpp configuration usedCONFIG_ARCH_LOWLEVEL_INIT defination removed
v10: CONFIG_ENV_SIZE set to 4kbCONFIG_SYS_MALLOC_LEN set to 128kb
v11: updated as per feedback for v10
copyright statement corrected
mtdparts definition corrected
all code lines checked for max len 80 chars
v12: config_cmd_default.h used in board config
entry in MAINTAINERS list added
MAINTAINERS | 1 + MAKEALL | 1 + Makefile | 3 + board/Marvell/mv88f6281gtw_ge/Makefile | 51 ++++++ board/Marvell/mv88f6281gtw_ge/config.mk | 25 +++ board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c | 141 ++++++++++++++++ board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.h | 36 ++++ include/configs/mv88f6281gtw_ge.h | 202 +++++++++++++++++++++++ 8 files changed, 460 insertions(+), 0 deletions(-) create mode 100644 board/Marvell/mv88f6281gtw_ge/Makefile create mode 100644 board/Marvell/mv88f6281gtw_ge/config.mk create mode 100644 board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c create mode 100644 board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.h create mode 100644 include/configs/mv88f6281gtw_ge.h
MAINTAINERS +1 -0
@@ -675,6 +675,7 @@ Hugo Villeneuve <[email protected]> Prafulla Wadaskar <[email protected]> + mv88f6281gtw_ge ARM926EJS (Kirkwood SoC) sheevaplug ARM926EJS (Kirkwood SoC) Richard Woodruff <[email protected]>
MAKEALL +1 -0
@@ -510,6 +510,7 @@ LIST_ARM9=" \ cp946es \ cp966 \ lpd7a400 \ + mv88f6281gtw_ge \ mx1ads \ mx1fs2 \ netstar \
Makefile +3 -0
@@ -2853,6 +2853,9 @@ lpd7a400_config \ lpd7a404_config: unconfig @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x +mv88f6281gtw_ge_config: unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood + mx1ads_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t mx1ads NULL imx
board/Marvell/mv88f6281gtw_ge/Makefile new file +51 -0
51 lines not on this page · raw message
board/Marvell/mv88f6281gtw_ge/config.mk new file +25 -0
@@ -0,0 +1,25 @@ +# +# (C) Copyright 2009 +# Marvell Semiconductor <www.marvell.com> +# Written-by: Prafulla Wadaskar <[email protected]> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +# MA 02110-1301 USA +# + +TEXT_BASE = 0x00600000
board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c new file +141 -0
141 lines not on this page · raw message
board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.h new file +36 -0
@@ -0,0 +1,36 @@ +/* +* (C) Copyright 2009 +* Marvell Semiconductor <www.marvell.com> +* Written-by: Prafulla Wadaskar <[email protected]> +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +* MA 02110-1301 USA +*/ + +#ifndef __MV88F6281GTW_GE_H +#define __MV88F6281GTW_GE_H + +#define MV88F6281GTW_GE_OE_LOW (~((1 << 7) | (1 << 12) \ + |(1 << 20) | (1 << 21)))/*enable GLED,RLED */ +#define MV88F6281GTW_GE_OE_HIGH (~((1 << 4)|(1 << 6)|(1 << 7)|(1 << 12) \ + |(1 << 13)|(1 << 16)|(1 << 17))) +#define MV88F6281GTW_GE_OE_VAL_LOW (1 << 20)/*make GLED on */ +#define MV88F6281GTW_GE_OE_VAL_HIGH ((1 << 6)|(1 << 13)|(1 << 16)|(1 << 17)) + + +#endif /* __MV88F6281GTW_GE_H */
include/configs/mv88f6281gtw_ge.h new file +202 -0
202 lines not on this page · raw message
Signature · 1 line
1.5.3.3
PATCH v12 1/1 Marvell MV88F6281GTW_GE Board support
Quoted 4 lines
+ */
include/configs/mv88f6281gtw_ge.h new file +3
-0+#define CONFIG_CMDLINE_TAG 1/* enable passing of ATAGs */ +#define CONFIG_INITRD_TAG 1/* enable INITRD tag */ +#define CONFIG_SETUP_MEMORY_TAGS 1/* enable memory tag */
include/configs/mv88f6281gtw_ge.h line 93
Quoted 10 lines
include/configs/mv88f6281gtw_ge.h new file +10
-0+ +#define CONFIG_SYS_PROMPT "Marvell>> "/* Command Prompt */ +#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buff Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + +sizeof(CONFIG_SYS_PROMPT) + 16)/* Print Buff */ +/* +* Commands configuration +*/ +#undef CONFIG_CMD_FLASH +#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
please move this 2 define
include/configs/mv88f6281gtw_ge.h line 102
Quoted 9 lines
include/configs/mv88f6281gtw_ge.h new file +9
-0+ +#include <config_cmd_default.h> +#define CONFIG_CMD_AUTOSCRIPT +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FAT +#define CONFIG_CMD_PING +#define CONFIG_CMD_SF +#define CONFIG_CMD_USB
here
include/configs/mv88f6281gtw_ge.h line 106
Quoted 4 lines
include/configs/mv88f6281gtw_ge.h new file +4
-0+ +/* +* Flash configuration +*/
otherwise fine
Best Regards,
J.