ARM Pull Request
Hi Wolfgang,
please pull
The following changes since commit 59869ca72df8bc4e4ffa9dd17cb6673bbe010272:
Wolfgang Denk (1):
Merge branch 'master' of git://git.denx.de/u-boot-video
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
Daniel Mack (2):
pxa: add clock for system bus 2 arbiter
pxa: fix CKEN_B register bits
Grazvydas Ignotas (4):
OMAP3 pandora: pin mux cleanup
OMAP3 pandora: setup pin mux for pins used on rev3 boards OMAP3 pandora: setup pulls for various GPIOs OMAP3 pandora: Fix CKE1 MUX setting to allow self-refresh
Jean-Christophe PLAGNIOL-VILLARD (2):
versatile: specify the board type on the prompt
versatile: update config and merge to cfi flash driver
Prafulla Wadaskar (2):
nand: Add Marvell Kirkwood NAND driver
arm: Kirkwood: bugfix: UART1 bar correction
Sedji Gaouaou (2):
at91: Introduction of at91sam9g45 SOC.
at91: Introduction of at91sam9g10 SOC.
MAINTAINERS | 4 + MAKEALL | 38 +- Makefile | 41 ++- board/armltd/versatile/Makefile | 2 +- board/armltd/versatile/flash.c | 514 ----------------------- board/atmel/at91sam9261ek/at91sam9261ek.c | 36 ++ board/atmel/at91sam9m10g45ek/Makefile | 55 +++ board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 334 +++++++++++++++ board/atmel/at91sam9m10g45ek/config.mk | 1 + board/atmel/at91sam9m10g45ek/led.c | 41 ++ board/omap3/pandora/pandora.h | 86 ++--- cpu/arm926ejs/at91/Makefile | 3 + cpu/arm926ejs/at91/at91sam9m10g45_devices.c | 175 ++++++++ cpu/arm926ejs/at91/clock.c | 12 +- doc/README.at91 | 22 +- drivers/mtd/nand/Makefile | 1 + drivers/mtd/nand/kirkwood_nand.c | 82 ++++ drivers/net/macb.c | 6 +- include/asm-arm/arch-at91/at91_pmc.h | 1 + include/asm-arm/arch-at91/at91sam9_matrix.h | 2 + include/asm-arm/arch-at91/at91sam9g45.h | 139 ++++++ include/asm-arm/arch-at91/at91sam9g45_matrix.h | 153 +++++++ include/asm-arm/arch-at91/clk.h | 5 + include/asm-arm/arch-at91/hardware.h | 8 +- include/asm-arm/arch-at91/memory-map.h | 1 + include/asm-arm/arch-kirkwood/kirkwood.h | 2 +- include/asm-arm/arch-pxa/pxa-regs.h | 13 +- include/configs/at91sam9261ek.h | 13 +- include/configs/at91sam9m10g45ek.h | 225 ++++++++++ include/configs/versatile.h | 77 +++- 30 files changed, 1474 insertions(+), 618 deletions(-) delete mode 100644 board/armltd/versatile/flash.c create mode 100644 board/atmel/at91sam9m10g45ek/Makefile create mode 100644 board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c create mode 100644 board/atmel/at91sam9m10g45ek/config.mk create mode 100644 board/atmel/at91sam9m10g45ek/led.c create mode 100644 cpu/arm926ejs/at91/at91sam9m10g45_devices.c create mode 100644 drivers/mtd/nand/kirkwood_nand.c create mode 100644 include/asm-arm/arch-at91/at91sam9g45.h create mode 100644 include/asm-arm/arch-at91/at91sam9g45_matrix.h create mode 100644 include/configs/at91sam9m10g45ek.h
Best Regards,
J.
Wolfgang Denk
AppliedDear Jean-Christophe PLAGNIOL-VILLARD,
Quoted 66 lines · In message <[email protected]> you wrote:
Hi Wolfgang,
please pull
The following changes since commit59869ca72df8bc4e4ffa9dd17cb6673bbe010272:
Wolfgang Denk (1):
Merge branch 'master' ofgit://git.denx.de/u-boot-videoare available in the git repository at:
git://git.denx.de/u-boot-arm.gitmasterDaniel Mack (2):
pxa: add clock for system bus 2 arbiter
pxa: fixCKEN_Bregister bitsGrazvydas Ignotas (4):
OMAP3 pandora: pin mux cleanup
OMAP3 pandora: setup pin mux for pins used on rev3 boards OMAP3 pandora: setup pulls for various GPIOs OMAP3 pandora: Fix CKE1 MUX setting to allow self-refreshJean-Christophe PLAGNIOL-VILLARD (2):
versatile: specify the board type on the prompt
versatile: update config and merge to cfi flash driverPrafulla Wadaskar (2):
nand: Add Marvell Kirkwood NAND driver
arm: Kirkwood: bugfix: UART1 bar correctionSedji Gaouaou (2):
at91: Introduction of at91sam9g45 SOC.
at91: Introduction of at91sam9g10 SOC.MAINTAINERS | 4 + MAKEALL | 38 +- Makefile | 41 ++- board/armltd/versatile/Makefile | 2 +- board/armltd/versatile/flash.c | 514 ----------------------- board/atmel/at91sam9261ek/at91sam9261ek.c | 36 ++ board/atmel/at91sam9m10g45ek/Makefile | 55 +++ board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 334 +++++++++++++++ board/atmel/at91sam9m10g45ek/config.mk | 1 + board/atmel/at91sam9m10g45ek/led.c | 41 ++ board/omap3/pandora/pandora.h | 86 ++--- cpu/arm926ejs/at91/Makefile | 3 + cpu/arm926ejs/at91/at91sam9m10g45_devices.c | 175 ++++++++ cpu/arm926ejs/at91/clock.c | 12 +- doc/README.at91 | 22 +- drivers/mtd/nand/Makefile | 1 + drivers/mtd/nand/kirkwood_nand.c | 82 ++++ drivers/net/macb.c | 6 +- include/asm-arm/arch-at91/at91_pmc.h | 1 + include/asm-arm/arch-at91/at91sam9_matrix.h | 2 + include/asm-arm/arch-at91/at91sam9g45.h | 139 ++++++ include/asm-arm/arch-at91/at91sam9g45_matrix.h | 153 +++++++ include/asm-arm/arch-at91/clk.h | 5 + include/asm-arm/arch-at91/hardware.h | 8 +- include/asm-arm/arch-at91/memory-map.h | 1 + include/asm-arm/arch-kirkwood/kirkwood.h | 2 +- include/asm-arm/arch-pxa/pxa-regs.h | 13 +- include/configs/at91sam9261ek.h | 13 +- include/configs/at91sam9m10g45ek.h | 225 ++++++++++ include/configs/versatile.h | 77 +++- 30 files changed, 1474 insertions(+), 618 deletions(-) delete mode 100644 board/armltd/versatile/flash.c create mode 100644 board/atmel/at91sam9m10g45ek/Makefile
Quoted 8 lines
create mode 100644 board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c create mode 100644 board/atmel/at91sam9m10g45ek/config.mk create mode 100644 board/atmel/at91sam9m10g45ek/led.c create mode 100644 cpu/arm926ejs/at91/at91sam9m10g45_devices.c create mode 100644 drivers/mtd/nand/kirkwood_nand.c create mode 100644 include/asm-arm/arch-at91/at91sam9g45.h create mode 100644 include/asm-arm/arch-at91/at91sam9g45_matrix.h create mode 100644 include/configs/at91sam9m10g45ek.h
Applied, thanks.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "Here's a fish hangs in the net like a poor man's right in the law. 'Twill hardly come out." - Shakespeare, Pericles, Act II, Scene 1