Skip to contentSkip to conversation

powerpc/mm: Add opcode definitions for tlbivax and tlbsrx.

PATCH In review Benjamin Herrenschmidt 2 participants 4 messages Jul 23, 2009 – Jul 24, 2009 PowerPC

lore
Share & tools
lore
#0 lore raw

PATCH 4/20 powerpc/mm: Add opcode definitions for tlbivax and tlbsrx.

This adds the opcode definitions to ppc-opcode.h for the two instructions tlbivax and tlbsrx. as defined by Book3E 2.06

---

 arch/powerpc/include/asm/ppc-opcode.h |    6 ++++++
 1 file changed, 6 insertions(+)
arch/powerpc/include/asm/ppc-opcode.h +6 -0
@@ -48,6 +48,8 @@
 #define PPC_INST_TLBIE			0x7c000264
 #define PPC_INST_TLBILX			0x7c000024
 #define PPC_INST_WAIT			0x7c00007c
+#define PPC_INST_TLBIVAX		0x7c000624
+#define PPC_INST_TLBSRX_DOT		0x7c0006a5
 
 /* macros to insert fields into opcodes */
 #define __PPC_RA(a)	(((a) & 0x1f) << 16)
@@ -76,6 +78,10 @@
 					__PPC_WC(w))
 #define PPC_TLBIE(lp,a) 	stringify_in_c(.long PPC_INST_TLBIE | \
 					       __PPC_RB(a) | __PPC_RS(lp))
+#define PPC_TLBSRX_DOT(a,b)	stringify_in_c(.long PPC_INST_TLBSRX_DOT | \
+					__PPC_RA(a) | __PPC_RB(b))
+#define PPC_TLBIVAX(a,b)	stringify_in_c(.long PPC_INST_TLBIVAX | \
+					__PPC_RA(a) | __PPC_RB(b))
 
 /*
  * Define what the VSX XX1 form instructions will look like, then add
#1 lore raw
Quoted 8 lines · Benjamin Herrenschmidt

This adds the opcode definitions to ppc-opcode.h for the two instructions tlbivax and tlbsrx. as defined by Book3E 2.06

---

arch/powerpc/include/asm/ppc-opcode.h | 6 ++++++

1 file changed, 6 insertions(+)

Do we really have binutils that don't have tlbivax properly at this point?

- k

#2 lore raw
Quoted 6 lines · Kumar Gala
Quoted 4 lines · Benjamin Herrenschmidt

This adds the opcode definitions to ppc-opcode.h for the two instructions
tlbivax and tlbsrx. as defined by Book3E 2.06

Quoted 8 lines
Quoted 5 lines

---

arch/powerpc/include/asm/ppc-opcode.h | 6 ++++++

1 file changed, 6 insertions(+)

Do we really have binutils that don't have tlbivax properly at this point?

I don't know for sure, I like being consistent with the rest though and so I use those macros for all those MMU opcodes. Also means that I have no problem building with my current toolchain without passing a specific -mcpu option or anything like that :-)

We can change that back later if you want.

Cheers,
Ben.

#3 lore raw
Quoted 16 lines · Benjamin Herrenschmidt
Quoted 6 lines · Kumar Gala
Quoted 4 lines · Benjamin Herrenschmidt

This adds the opcode definitions to ppc-opcode.h for the two instructions
tlbivax and tlbsrx. as defined by Book3E 2.06

Quoted 8 lines
Quoted 5 lines

---

arch/powerpc/include/asm/ppc-opcode.h | 6 ++++++

1 file changed, 6 insertions(+)

Do we really have binutils that don't have tlbivax properly at this point?

Quoted 6 lines

I don't know for sure, I like being consistent with the rest though and so I use those macros for all those MMU opcodes. Also means that I have no problem building with my current toolchain without passing a specific -mcpu option or anything like that :-)

We can change that back later if you want.

ok, just wondering.. at some point we should decide which way we want to go, since we use "tlbivax" today on e500/fsl-booke.

- k