hp-wmi: improve rfkill support
Subsystems (2)
PATCH 1/1 hp-wmi: improve rfkill support
1) Add support for reading the hardware blocked state. Previously we read a combination of the hardware and software blocked states, reporting it as the software blocked state. This caused some confusing behaviour.
2) The software state is persistent, mark it as such.
3) Check rfkill in the resume handler. Both the hard and soft blocked states may change over hibernation.
---
This code is the combination of two patches tested by Maciej. There are no changes to that code, only an updated changelog.
I tested wifi on the G7000. Maciej tested wifi and bluetooth. wwan is as yet untested; we are assuming the interface follows the same pattern as wifi and bluetooth.
drivers/platform/x86/hp-wmi.c | 139 +++++++++++++++++++++++++---------------- 1 files changed, 84 insertions(+), 55 deletions(-)
drivers/platform/x86/hp-wmi.c +84 -55
@@ -51,6 +51,12 @@ MODULE_ALIAS("wmi:5FB7F034-2C63-45e9-BE91-3D44E2C707E4");#define HPWMI_WIRELESS_QUERY 0x5#define HPWMI_HOTKEY_QUERY 0xc +enum hp_wmi_radio { +HPWMI_WIFI =0 , +HPWMI_BLUETOOTH =1 , +HPWMI_WWAN =2 , +}; +static int __init hp_wmi_bios_setup (struct platform_device *device); static int __exit hp_wmi_bios_remove(struct platform_device *device);static int hp_wmi_resume_handler (struct platform_device *device);
@@ -170,8 +176,8 @@ static int hp_wmi_tablet_state(void)static int hp_wmi_set_block (void *data,bool blocked) { -unsigned long b = (unsigned long ) data; -int query =BIT (b +8 ) | ((!blocked) << b); +enum hp_wmi_radio r = (enum hp_wmi_radio ) data; +int query =BIT (r +8 ) | ((!blocked) << r);return hp_wmi_perform_query (HPWMI_WIRELESS_QUERY ,1 , query); }
@@ -180,31 +186,23 @@ static const struct rfkill_ops hp_wmi_rfkill_ops = { .set_block = hp_wmi_set_block, }; -static bool hp_wmi_wifi_state (void ) +static bool hp_wmi_get_sw_state (enum hp_wmi_radio r) {int wireless =hp_wmi_perform_query (HPWMI_WIRELESS_QUERY ,0 ,0 ); +int mask =0x200 << (r *8 ); -if (wireless &0x100 ) +if (wireless & mask)return false;else return true; } -static bool hp_wmi_bluetooth_state (void ) +static bool hp_wmi_get_hw_state (enum hp_wmi_radio r) {int wireless =hp_wmi_perform_query (HPWMI_WIRELESS_QUERY ,0 ,0 ); +int mask =0x800 << (r *8 ); -if (wireless &0x10000 ) -return false; -else -return true; -} - -static bool hp_wmi_wwan_state (void ) -{ -int wireless =hp_wmi_perform_query (HPWMI_WIRELESS_QUERY ,0 ,0 ); - -if (wireless &0x1000000 ) +if (wireless & mask)return false;else return true;
@@ -329,49 +327,55 @@ static void hp_wmi_notify(u32 value, void *context)struct acpi_buffer response = {ACPI_ALLOCATE_BUFFER ,NULL };static struct key_entry *key;union acpi_object *obj; +int eventcode;wmi_get_event_data (value, &response); obj = (union acpi_object *)response.pointer; -if (obj && obj->type ==ACPI_TYPE_BUFFER && obj->buffer.length ==8 ) { -int eventcode = *((u8 *) obj->buffer.pointer); -if (eventcode ==0x4 ) - eventcode =hp_wmi_perform_query (HPWMI_HOTKEY_QUERY ,0 , -0 ); - key =hp_wmi_get_entry_by_scancode (eventcode); -if (key) { -switch (key->type) { -case KE_KEY : -input_report_key (hp_wmi_input_dev, - key->keycode,1 ); -input_sync (hp_wmi_input_dev); -input_report_key (hp_wmi_input_dev, - key->keycode,0 ); -input_sync (hp_wmi_input_dev); -break ; - } - }else if (eventcode ==0x1 ) { -input_report_switch (hp_wmi_input_dev,SW_DOCK , -hp_wmi_dock_state ()); -input_report_switch (hp_wmi_input_dev,SW_TABLET_MODE , -hp_wmi_tablet_state ()); +if (!obj || obj->type !=ACPI_TYPE_BUFFER || obj->buffer.length !=8 ) { +printk (KERN_INFO "HP WMI: Unknown response received\n" ); +return ; + } + + eventcode = *((u8 *) obj->buffer.pointer); +if (eventcode ==0x4 ) + eventcode =hp_wmi_perform_query (HPWMI_HOTKEY_QUERY ,0 , +0 ); + key =hp_wmi_get_entry_by_scancode (eventcode); +if (key) { +switch (key->type) { +case KE_KEY : +input_report_key (hp_wmi_input_dev, + key->keycode,1 ); +input_sync (hp_wmi_input_dev); +input_report_key (hp_wmi_input_dev, + key->keycode,0 );input_sync (hp_wmi_input_dev); - }else if (eventcode ==0x5 ) { -if (wifi_rfkill) -rfkill_set_sw_state (wifi_rfkill, -hp_wmi_wifi_state ()); -if (bluetooth_rfkill) -rfkill_set_sw_state (bluetooth_rfkill, -hp_wmi_bluetooth_state ()); -if (wwan_rfkill) -rfkill_set_sw_state (wwan_rfkill, -hp_wmi_wwan_state ()); - }else -printk (KERN_INFO "HP WMI: Unknown key pressed - %x\n" , - eventcode); +break ; + } + }else if (eventcode ==0x1 ) { +input_report_switch (hp_wmi_input_dev,SW_DOCK , +hp_wmi_dock_state ()); +input_report_switch (hp_wmi_input_dev,SW_TABLET_MODE , +hp_wmi_tablet_state ()); +input_sync (hp_wmi_input_dev); + }else if (eventcode ==0x5 ) { +if (wifi_rfkill) +rfkill_set_states (wifi_rfkill, +hp_wmi_get_sw_state (HPWMI_WIFI ), +hp_wmi_get_hw_state (HPWMI_WIFI )); +if (bluetooth_rfkill) +rfkill_set_states (bluetooth_rfkill, +hp_wmi_get_sw_state (HPWMI_BLUETOOTH ), +hp_wmi_get_hw_state (HPWMI_BLUETOOTH )); +if (wwan_rfkill) +rfkill_set_states (wwan_rfkill, +hp_wmi_get_sw_state (HPWMI_WWAN ), +hp_wmi_get_hw_state (HPWMI_WWAN )); }else -printk (KERN_INFO "HP WMI: Unknown response received\n" ); +printk (KERN_INFO "HP WMI: Unknown key pressed - %x\n" , + eventcode); }static int __init hp_wmi_input_setup (void )
@@ -450,7 +454,11 @@ static int __init hp_wmi_bios_setup(struct platform_device *device) wifi_rfkill =rfkill_alloc ("hp-wifi" , &device->dev,RFKILL_TYPE_WLAN , &hp_wmi_rfkill_ops, - (void *)0 ); + (void *)HPWMI_WIFI ); +rfkill_init_sw_state (wifi_rfkill, +hp_wmi_get_sw_state (HPWMI_WIFI )); +rfkill_set_hw_state (wifi_rfkill, +hp_wmi_get_hw_state (HPWMI_WIFI )); err =rfkill_register (wifi_rfkill);if (err) goto register_wifi_error;
@@ -460,7 +468,11 @@ static int __init hp_wmi_bios_setup(struct platform_device *device) bluetooth_rfkill =rfkill_alloc ("hp-bluetooth" , &device->dev,RFKILL_TYPE_BLUETOOTH , &hp_wmi_rfkill_ops, - (void *)1 ); + (void *)HPWMI_BLUETOOTH ); +rfkill_init_sw_state (bluetooth_rfkill, +hp_wmi_get_sw_state (HPWMI_BLUETOOTH )); +rfkill_set_hw_state (bluetooth_rfkill, +hp_wmi_get_hw_state (HPWMI_BLUETOOTH )); err =rfkill_register (bluetooth_rfkill);if (err) goto register_bluetooth_error;
@@ -470,7 +482,11 @@ static int __init hp_wmi_bios_setup(struct platform_device *device) wwan_rfkill =rfkill_alloc ("hp-wwan" , &device->dev,RFKILL_TYPE_WWAN , &hp_wmi_rfkill_ops, - (void *)2 ); + (void *)HPWMI_WWAN ); +rfkill_init_sw_state (wwan_rfkill, +hp_wmi_get_sw_state (HPWMI_WWAN )); +rfkill_set_hw_state (wwan_rfkill, +hp_wmi_get_hw_state (HPWMI_WWAN )); err =rfkill_register (wwan_rfkill);if (err) goto register_wwan_err;
@@ -526,6 +542,19 @@ static int hp_wmi_resume_handler(struct platform_device *device) hp_wmi_tablet_state());input_sync (hp_wmi_input_dev); +if (wifi_rfkill) +rfkill_set_states (wifi_rfkill, +hp_wmi_get_sw_state (HPWMI_WIFI ), +hp_wmi_get_hw_state (HPWMI_WIFI )); +if (bluetooth_rfkill) +rfkill_set_states (bluetooth_rfkill, +hp_wmi_get_sw_state (HPWMI_BLUETOOTH ), +hp_wmi_get_hw_state (HPWMI_BLUETOOTH )); +if (wwan_rfkill) +rfkill_set_states (wwan_rfkill, +hp_wmi_get_sw_state (HPWMI_WWAN ), +hp_wmi_get_hw_state (HPWMI_WWAN )); +return 0 ; }
Signature · 1 line
1.6.3.2
Quoted 5 lines · Alan Jenkins
1) Add support for reading the hardware blocked state. Previously we read a combination of the hardware and software blocked states, reporting it as the software blocked state. This caused some confusing behaviour.
Quoted 7 lines
2) The software state is persistent, mark it as such.
3) Check rfkill in the resume handler. Both the hard and soft blocked states may change over hibernation.
Signed-off-by Alan Jenkins <[email protected]>Tested-by Maciej Rutecki <[email protected]>
Signature · 1 line
Matthew Garrett | [email protected]
2009/7/21 Alan Jenkins <[email protected]>:
Quoted 5 lines
1) Add support for reading the hardware blocked state. Previously we read a combination of the hardware and software blocked states, reporting it as the software blocked state. This caused some confusing behaviour.
Quoted 7 lines
2) The software state is persistent, mark it as such.
3) Check rfkill in the resume handler. Both the hard and soft blocked states may change over hibernation.
Signed-off-by Alan Jenkins <[email protected]>Tested-by Maciej Rutecki <[email protected]>
It's this patch is added to -rc4? I one case I have strange behaviour.
Before disable by button:
root@gumis:/home/maciek/Desktop# rfkill list
2: hp-wifi: Wireless LAN
Soft blocked: no
Hard blocked: no
3: hp-bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
16: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
17: phy7: Wireless LAN
Soft blocked: no
Hard blocked: noDisable by button:
root@gumis:/home/maciek/Desktop# rfkill list
2: hp-wifi: Wireless LAN
Soft blocked: yes
Hard blocked: no
3: hp-bluetooth: Bluetooth
Soft blocked: yes
Hard blocked: no
17: phy7: Wireless LAN
Soft blocked: no
Hard blocked: yesI do s2disk. After resume from suspend to disk (still disabled by button):
root@gumis:/home/maciek/Desktop# rfkill list
2: hp-wifi: Wireless LAN
Soft blocked: yes
Hard blocked: no
3: hp-bluetooth: Bluetooth
Soft blocked: yes
Hard blocked: no
18: phy8: Wireless LAN
Soft blocked: no
Hard blocked: yesTry enable by button:
root@gumis:/home/maciek/Desktop# rfkill list
2: hp-wifi: Wireless LAN
Soft blocked: yes
Hard blocked: no
3: hp-bluetooth: Bluetooth
Soft blocked: yes
Hard blocked: no
18: phy8: Wireless LAN
Soft blocked: no
Hard blocked: yesNothing change (LED, wireless and bluetooth don't work). To enable it I use this script rfkill.sh (I must use rfkill program):
#!/bin/sh
PROGRAM=/usr/local/sbin/rfkill
WIFI=$PROGRAM list | grep -E 'Wireless|Bluetooth' | cut -d ':' -f 1
for DEVICE in $WIFI; do
echo $DEVICE
$PROGRAM unblock $DEVICE
done
Then works OK:
root@gumis:/home/maciek/Desktop# ./rfkill.sh
2
3
18
root@gumis:/home/maciek/Desktop# rfkill list
2: hp-wifi: Wireless LAN
Soft blocked: no
Hard blocked: no
3: hp-bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
18: phy8: Wireless LAN
Soft blocked: no
Hard blocked: no
19: hci0: Bluetooth
Soft blocked: no
Hard blocked: noIt's normal behaviour?
Signature · 6 lines
Maciej Rutecki http://www.maciek.unixy.pl -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 9 lines · Maciej Rutecki
2009/7/21 Alan Jenkins <[email protected]>:
Quoted 7 lines
1) Add support for reading the hardware blocked state. Previously we read a combination of the hardware and software blocked states, reporting it as the software blocked state. This caused some confusing behaviour.
2) The software state is persistent, mark it as such.
Quoted 8 lines
Quoted 6 lines
3) Check rfkill in the resume handler. Both the hard and soft blocked states may change over hibernation.
Signed-off-by Alan Jenkins <[email protected]>Tested-by Maciej Rutecki <[email protected]>It's this patch is added to -rc4?
I didn't submit it for 2.6.31 because I didn't think it fixed a regression.
Quoted 84 lines
I one case I have strange behaviour.
Before disable by button:
root@gumis:/home/maciek/Desktop# rfkill list 2: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no 3: hp-bluetooth: Bluetooth Soft blocked: no Hard blocked: no 16: hci0: Bluetooth Soft blocked: no Hard blocked: no 17: phy7: Wireless LAN Soft blocked: no Hard blocked: noDisable by button:
root@gumis:/home/maciek/Desktop# rfkill list 2: hp-wifi: Wireless LAN Soft blocked: yes Hard blocked: no 3: hp-bluetooth: Bluetooth Soft blocked: yes Hard blocked: no 17: phy7: Wireless LAN Soft blocked: no Hard blocked: yesI do s2disk. After resume from suspend to disk (still disabled by button):
root@gumis:/home/maciek/Desktop# rfkill list 2: hp-wifi: Wireless LAN Soft blocked: yes Hard blocked: no 3: hp-bluetooth: Bluetooth Soft blocked: yes Hard blocked: no 18: phy8: Wireless LAN Soft blocked: no Hard blocked: yesTry enable by button:
root@gumis:/home/maciek/Desktop# rfkill list 2: hp-wifi: Wireless LAN Soft blocked: yes Hard blocked: no 3: hp-bluetooth: Bluetooth Soft blocked: yes Hard blocked: no 18: phy8: Wireless LAN Soft blocked: no Hard blocked: yesNothing change (LED, wireless and bluetooth don't work). To enable it I use this script
rfkill.sh(I must use rfkill program):#!/bin/sh
PROGRAM=/usr/local/sbin/rfkill
WIFI=$PROGRAM list | grep -E 'Wireless|Bluetooth' | cut -d ':' -f 1for DEVICE in $WIFI; do
echo $DEVICE
$PROGRAM unblock $DEVICE
doneThen works OK:
root@gumis:/home/maciek/Desktop# ./rfkill.sh 2 3 18 root@gumis:/home/maciek/Desktop# rfkill list 2: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no 3: hp-bluetooth: Bluetooth Soft blocked: no Hard blocked: no 18: phy8: Wireless LAN Soft blocked: no Hard blocked: no 19: hci0: Bluetooth Soft blocked: no Hard blocked: no
Quoted 2 lines
It's normal behaviour?
That's a bug. You're saying this is in -rc4, without applying my patch?
I think I know exactly what is happening. Apply my patch, and it will go away :-).
I'm not sure this is a new bug though. It might be triggered by the big rfkill rewrite, but I don't see how that could happen. Can you confirm if this happens in 2.6.30?
Thanks
Alan
2009/7/23 Alan Jenkins <[email protected]>:
Quoted 2 lines
That's a bug. You're saying this is in -rc4, without applying my patch?
Yes
Quoted 3 lines
I think I know exactly what is happening. Apply my patch, and it will go away :-).
Yes. I add Your patch to -rc4 and rfkill works OK:
Enable by button:
root@gumis:/home/maciek# rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
1: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
2: hp-wifi: Wireless LAN
Soft blocked: no
Hard blocked: no
3: hp-bluetooth: Bluetooth
Soft blocked: no
Hard blocked: noDisable by button:
root@gumis:/home/maciek# rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yes
2: hp-wifi: Wireless LAN
Soft blocked: no
Hard blocked: no
3: hp-bluetooth: Bluetooth
Soft blocked: no
Hard blocked: noAfter resume from s2disk:
root@gumis:/home/maciek# rfkill list
2: hp-wifi: Wireless LAN
Soft blocked: no
Hard blocked: no
3: hp-bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
4: phy1: Wireless LAN
Soft blocked: no
Hard blocked: yes(are some differences after and before s2disk)
Enable by button:
root@gumis:/home/maciek# rfkill list
2: hp-wifi: Wireless LAN
Soft blocked: no
Hard blocked: no
3: hp-bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
4: phy1: Wireless LAN
Soft blocked: no
Hard blocked: no
5: hci0: Bluetooth
Soft blocked: no
Hard blocked: noAnd wifi/bluetooth works without manual enable. Thanks.
Quoted 4 lines
I'm not sure this is a new bug though. It might be triggered by the big rfkill rewrite, but I don't see how that could happen. Can you confirm if this happens in 2.6.30?
2.6.30 works OK
Quoted 4 lines
Thanks
Alan
Regards
Signature · 6 lines
Maciej Rutecki http://www.maciek.unixy.pl -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 9 lines · Alan Jenkins
1) Add support for reading the hardware blocked state. Previously we read a combination of the hardware and software blocked states, reporting it as the software blocked state. This caused some confusing behaviour.
2) The software state is persistent, mark it as such.
3) Check rfkill in the resume handler. Both the hard and soft blocked states may change over hibernation.
I've added this to my local branch for .31 for my HP 2510p. Light testing (linux only) showed no problems with .31-rc4.
One question: is it expected that pressing the hardware kill switch only enables the block for phy0? I guess it's probably sufficient.
$ ./rfkill list # after pressing hardware switch
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yes
1: hp-wifi: Wireless LAN
Soft blocked: no
Hard blocked: no
2: hp-bluetooth: Bluetooth
Soft blocked: no
Hard blocked: noLooks like with bluetooth soft-blocked the wireless leds blink on wifi network traffic, while with bluetooth unblocked it stays on permanently.
Cheers,
FJP
applied
thanks,
Len Brown, Intel Open Source Technology Center