arm nomadik: add gpio support
A message that is not in the archive (sent off-list or not yet received): [email protected]
PATCH 1/2 arm nomadik: add gpio support
From: Alessandro Rubini <[email protected]>
Signed-off-by Alessandro Rubini <[email protected]>
Acked-by Andrea Gallo <[email protected]>
--- board/st/nhk8815/Makefile | 2 +- board/st/nhk8815/gpio.c | 99 +++++++++++++++++++++++++++++++++++++++++++++ board/st/nhk8815/gpio.h | 42 +++++++++++++++++++ 3 files changed, 142 insertions(+), 1 deletions(-) create mode 100644 board/st/nhk8815/gpio.c create mode 100644 board/st/nhk8815/gpio.h
board/st/nhk8815/Makefile +1 -1
@@ -29,7 +29,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := nhk8815.o +COBJS := nhk8815.o gpio.o SOBJS := platform.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
board/st/nhk8815/gpio.c new file +99 -0
99 lines not on this page · raw message
board/st/nhk8815/gpio.h new file +42 -0
42 lines not on this page · raw message
Signature · 1 line
1.6.0.2
PATCH 2/2 arm nomadik: add i2c
In reply to a message not in the archiveFrom: Alessandro Rubini <[email protected]>
Signed-off-by Alessandro Rubini <[email protected]>
Acked-by Andrea Gallo <[email protected]>
--- board/st/nhk8815/nhk8815.c | 16 ++++++++++++++-- include/configs/nhk8815.h | 18 +++++++++++++++++- 2 files changed, 31 insertions(+), 3 deletions(-)
board/st/nhk8815/nhk8815.c +14 -2
@@ -27,6 +27,7 @@#include <common.h> #include <asm/io.h> +#include "gpio.h" DECLARE_GLOBAL_DATA_PTR ;
@@ -61,9 +62,20 @@ int board_init(void)return 0 ; } -int misc_init_r (void ) +int board_late_init (void ) { -setenv ("verify" ,"n" ); +/* Set the two I2C gpio lines to be gpio high */ +nmk_gpio_set (__SCL,1 );nmk_gpio_set (__SDA,1 ); +nmk_gpio_dir (__SCL,1 );nmk_gpio_dir (__SDA,1 ); +nmk_gpio_af (__SCL,GPIO_GPIO );nmk_gpio_af (__SDA,GPIO_GPIO ); + +/* Reset the I2C port expander, on GPIO77 */ +nmk_gpio_af (77 ,GPIO_GPIO ); +nmk_gpio_dir (77 ,1 ); +nmk_gpio_set (77 ,0 ); +udelay (10 ); +nmk_gpio_set (77 ,1 ); +return 0 ; }
include/configs/nhk8815.h +17 -1
@@ -93,7 +93,7 @@#define CONFIG_SYS_GBL_DATA_SIZE 128/* for initial data */ #define CONFIG_SYS_64BIT_VSPRINTF /* mtd desires this */ -#define CONFIG_MISC_INIT_R /* call misc_init_r during start up */ +#define BOARD_LATE_INIT /* call board_late_init during start up */ /* timing informazion */ #define CONFIG_SYS_HZ 1000/* Mandatory... */
@@ -110,6 +110,22 @@#define CONFIG_PL01x_PORTS { (void *)CFG_SERIAL0, (void *)CFG_SERIAL1 }#define CONFIG_PL011_CLOCK 48000000 +/* i2c, for the port extenders (uses gpio.c in board directory) */ +#ifndef __ASSEMBLY__ +#include "../board/st/nhk8815/gpio.h" +#define CONFIG_CMD_I2C +#define CONFIG_SOFT_I2C +#define CONFIG_SYS_I2C_SPEED 400000 +#define __SDA 63 +#define __SCL 62 +#define I2C_SDA (x) nmk_gpio_set(__SDA, x) +#define I2C_SCL (x) nmk_gpio_set(__SCL, x) +#define I2C_READ (nmk_gpio_get(__SDA)!=0) +#define I2C_ACTIVE nmk_gpio_dir(__SDA, 1) +#define I2C_TRISTATE nmk_gpio_dir(__SDA, 0) +#define I2C_DELAY (udelay(2)) +#endif /* __ASSEMBLY__ */ +/* Ethernet */ #define PCI_MEMORY_VADDR 0xe8000000#define PCI_IO_VADDR 0xee000000
Signature · 1 line
1.6.0.2
A message that is not in the archive (sent off-list or not yet received): 18bea9a6250fe555c9d40bb5ef86e232a9ed23e1.1247999980.git.rubini@unipv.it
PATCH 1/2 arm nomadik: add gpio support
Quoted 11 lines · Alessandro Rubini
From: Alessandro Rubini <[email protected]>
Signed-off-by Alessandro Rubini <[email protected]>Acked-by Andrea Gallo <[email protected]>--- board/st/nhk8815/Makefile | 2 +- board/st/nhk8815/gpio.c | 99 +++++++++++++++++++++++++++++++++++++++++++++ board/st/nhk8815/gpio.h | 42 +++++++++++++++++++ 3 files changed, 142 insertions(+), 1 deletions(-) create mode 100644 board/st/nhk8815/gpio.c create mode 100644 board/st/nhk8815/gpio.h
I guess this is soc dependent so please move it to cpu/arm926ejs/nomadik for .c and to include/asm-arm/arch-nomadik
otherwise fine
Best Regards,
J.