Skip to contentSkip to conversation

ppc4xx: Add GDsys CompactCenter board support.

PATCH Superseded Dirk Eibach 2 participants 2 messages Jul 24, 2009 Kbuild

v4 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

PATCH v4 1/1 ppc4xx: Add GDsys CompactCenter board support.

Board support for the Guntermann & Drunck CompactCenter and DevCon-Center.
Based on the AMCC Canyonlands board support by Stefan Roese.

---
Changes since v1:
- removed dead code
- whitespace cleanup
- simplified code for nand/nor distinction in board/gdsys/compactcenter/bootstra p.c

Changes since v2:
- removed get_cpu_num() from board/gdsys/compactcenter/compactcenter.c
- use __ft_board_setup() instead of ft_cpu_setup()
- cleanup CompactCenter/Canyonlands mixup
- reformatted CONFIG_SYS_4xx_GPIO_TABLE. Lines are > 80 chars but readable.

Changes since v3:
- took nor fixup from canyonlands (This still depends on __ft_board_setup() working properly, which is not the case yet)
- use chip_config instead of bootstrap command

 MAINTAINERS                               |    2 +
 MAKEALL                                   |    2 +
 Makefile                                  |    8 +
 board/gdsys/compactcenter/Makefile        |   53 ++++
 board/gdsys/compactcenter/chip_config.c   |   87 ++++++
 board/gdsys/compactcenter/compactcenter.c |  312 ++++++++++++++++++++
 board/gdsys/compactcenter/config.mk       |   41 +++
 board/gdsys/compactcenter/init.S          |   97 +++++++
 board/gdsys/compactcenter/u-boot.lds      |  144 ++++++++++
 include/configs/compactcenter.h           |  437 +++++++++++++++++++++++++++++
 10 files changed, 1183 insertions(+), 0 deletions(-)
 create mode 100644 board/gdsys/compactcenter/Makefile
 create mode 100644 board/gdsys/compactcenter/chip_config.c
 create mode 100644 board/gdsys/compactcenter/compactcenter.c
 create mode 100644 board/gdsys/compactcenter/config.mk
 create mode 100644 board/gdsys/compactcenter/init.S
 create mode 100644 board/gdsys/compactcenter/u-boot.lds
 create mode 100644 include/configs/compactcenter.h
MAINTAINERS +2 -0
index 575a7ec..888eb5c 100644
@@ -135,6 +135,8 @@ Jon Diekema <[email protected]>
 
 Dirk Eibach <[email protected]>
 
+	compactcenter	PPC460EX
+	devconcenter	PPC460EX
 	gdppc440etx	PPC440EP/GR
 	neo		PPC405EP
 
MAKEALL +2 -0
index 020ff73..7359b2e 100755
@@ -184,6 +184,7 @@ LIST_4xx="		\
 	canyonlands	\
 	canyonlands_nand \
 	CMS700		\
+	compactcenter	\
 	CPCI2DP		\
 	CPCI405		\
 	CPCI4052	\
@@ -194,6 +195,7 @@ LIST_4xx="		\
 	csb272		\
 	csb472		\
 	DASA_SIM	\
+	devconcenter	\
 	DP405		\
 	DU405		\
 	DU440		\
Makefile +8 -0
index 090e645..9be17f6 100644
@@ -1308,6 +1308,14 @@ CATcenter_33_config:	unconfig
 CMS700_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd
 
+# Compact-Center & DevCon-Center use different U-Boot images
+compactcenter_config \
+devconcenter_config:	unconfig
+	@mkdir -p $(obj)include
+	@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
+		tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
+	@$(MKCONFIG) -n $@ -a compactcenter ppc ppc4xx compactcenter gdsys
+
 CPCI2DP_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd
 
board/gdsys/compactcenter/Makefile new file +53 -0

53 lines not on this page · raw message

board/gdsys/compactcenter/chip_config.c new file +87 -0

87 lines not on this page · raw message

board/gdsys/compactcenter/compactcenter.c new file +312 -0

312 lines not on this page · raw message

board/gdsys/compactcenter/config.mk new file +41 -0

41 lines not on this page · raw message

board/gdsys/compactcenter/init.S new file +97 -0

97 lines not on this page · raw message

board/gdsys/compactcenter/u-boot.lds new file +144 -0

144 lines not on this page · raw message

include/configs/compactcenter.h new file +437 -0

437 lines not on this page · raw message

Signature · 1 line
1.5.6.5
#1 lore raw

PATCH v4 1/1 ppc4xx: Add GDsys CompactCenter board support.

Hi Dirk,

Quoted 3 lines · On Friday 24 July 2009 11:25:55 Dirk Eibach wrote:

Changes since v3:
- took nor fixup from canyonlands (This still depends on __ft_board_setup() working properly, which is not the case yet)

I just checked and noticed that this fixup I introduced a while ago for the physical NOR address is not needed any more. Please give this version a try, completely without additional fixup:

board/amcc/canyonlands/canyonlands.c +0 -15
index cfc1023..12385bf 100644
@@ -579,23 +579,8 @@ extern void __ft_board_setup(void *blob, bd_t *bd);
 
 void ft_board_setup(void *blob, bd_t *bd)
 {
-       u32 val[4];
-       int rc;
-
        __ft_board_setup(blob, bd);
 
-       /* Fixup NOR mapping */
-       val[0] = CONFIG_SYS_NOR_CS;             /* chip select number */
-       val[1] = 0;                             /* always 0 */
-       val[2] = CONFIG_SYS_FLASH_BASE_PHYS_L;          /* we fixed up this address */
-       val[3] = gd->bd->bi_flashsize;
-       rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
-                                 val, sizeof(val), 1);
-       if (rc) {
-               printf("Unable to update property NOR mapping, err=%s\n",
-                      fdt_strerror(rc));
-       }
-
        if (gd->board_type == BOARD_CANYONLANDS_SATA) {
                /*
                 * When SATA is selected we need to disable the first PCIe

And let me know if this works for you. Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================