serial: 8250: switch to dev_pm_ops
PATCH 1/1 serial: 8250: switch to dev_pm_ops
Signed-off-by Arnaud Faucher <[email protected]>
--- drivers/serial/8250.c | 16 ++++++++++------ 1 files changed, 10 insertions(+), 6 deletions(-)
drivers/serial/8250.c +10 -6
@@ -2982,42 +2982,46 @@ static int __devexit serial8250_remove(struct platform_device *dev)return 0 ; } -static int serial8250_suspend (struct platform_device *dev,pm_message_t state) +static int serial8250_suspend (struct device *dev) {int i;for (i =0 ; i <UART_NR ; i++) {struct uart_8250_port *up = &serial8250_ports[i]; -if (up->port.type !=PORT_UNKNOWN && up->port.dev == &dev->dev) +if (up->port.type !=PORT_UNKNOWN && up->port.dev == dev)uart_suspend_port (&serial8250_reg, &up->port); }return 0 ; } -static int serial8250_resume (struct platform_device *dev) +static int serial8250_resume (struct device *dev) {int i;for (i =0 ; i <UART_NR ; i++) {struct uart_8250_port *up = &serial8250_ports[i]; -if (up->port.type !=PORT_UNKNOWN && up->port.dev == &dev->dev) +if (up->port.type !=PORT_UNKNOWN && up->port.dev == dev)serial8250_resume_port (i); }return 0 ; } +static struct dev_pm_ops serial8250_pm_ops = { + .suspend = serial8250_suspend, + .resume = serial8250_resume, +}; +static struct platform_driver serial8250_isa_driver = { .probe = serial8250_probe, .remove =__devexit_p (serial8250_remove), - .suspend = serial8250_suspend, - .resume = serial8250_resume, .driver = { .name ="serial8250" , .owner =THIS_MODULE , + .pm = &serial8250_pm_ops, }, };
Signature · 1 line
1.6.3.3
Quoted 4 lines · Arnaud Faucher
Signed-off-by Arnaud Faucher <[email protected]>--- drivers/serial/8250.c | 16 ++++++++++------ 1 files changed, 10 insertions(+), 6 deletions(-)
The same patch has already been proposed in
http://lkml.org/lkml/2009/7/1/44.
Cheers,
FJP